Pasar al contenido principal

EVALUACION DE HORMIGONES AUTOCOMPACTANTES BOMBEADOS MEDIANTE INDICADORES PRESTACIONALES

BIA2013-48480-C2-2-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2013
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario UNIVERSIDAD DE ALCALA
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of curing temperature and relative humidity on early age and hardened properties of SCC

  • Barluenga, Gonzalo
  • Guardia, Cynthia
  • Puentes, Javier
The type and particle size of the additions used in SCC influence the setting and early hardening, modifying hydration speed and the development of initial properties. These processes are also altered by the curing temperature and relative humidity (RH) during Early age (EA) and would also affect SCC hardened properties. An experimental study was carried out to compare the effect of different curing temperatures, 10, 20 and 30 °C, and RH, 40 and 80%, on EA and hardened properties of SCC incorporating limestone filler (LF), microsilica (MS) and nanosilica (NS). It was observed that temperature modified the reaction speed and the evolution of EA properties while relative humidity affected evaporation and shrinkage at early age and hardened porosity and stiffness. SCC microstructure and pore-network formation were found to depend on the combination of curing conditions and the type and particle size of the additions., SL and Cementos Portland Valderrivas and the financial support provided by the grants: PII-14-022-P, co-funded by JC Castilla-La Mancha and FEDER and BIA2013-48480-C2-2-R and BIA2016-77911-R, funded by the Spanish Ministry of Economy and Competitiveness., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of full scale pumping at early age and on hardened microstructure and properties of SCC with fly ash in hot-dry curing conditions

  • Barluenga, Gonzalo
  • Giménez, M.
  • Sepulcre, A.
  • Palomar, Irene
An experimental study on the effect of real scale hot-dry climate conditions and full scale cast-in-place by pumping of Self-Compacting Concrete (SCC) with fly ash (FA) was carried out. The influence of water to binder ratio (w/b), mixing scale, curing conditions and cast-in-place by pumping on the early age and hardened properties and on the hardened microstructure were analyzed in SCC samples manufactured in the laboratory, in a full scale concrete plant and in an on-site application of pumped SCC. The aim of the study was to compare the early age and hardened properties of SCC mixtures manufactured in laboratory conditions and in real scale applications. It was found that the samples manufactured outside the laboratory showed changes on their properties that can be related to changes in their microstructure. The increase of w/b produced larger air gaps at the interfacial transition zone (ITZ), increased total porosity and mezzo-porosity and reduced apparent density, compressive strength and ultrasonic pulse parameters. The use of an industrial mixer in hot-dry real scale climate conditions increased w/b required to achieve self-compactability, amplified fly ash reactivity and enlarged air gaps in the ITZ. Cast in-place by pumping in hot-dry climate conditions accelerated cement hydration at early age and increased mezzo-porosity and air permeability, while reduced compressive strength., The study has been financed by the Spanish Ministry of Economy and Competitiveness, grants BIA2013-48480-C2-2-R, BIA2013-48480-C2-1-R and BIA2016-77911-R. The authors greatly acknowledge the support of the companies OHL and SIKA Spain., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Methodology for monitoring cement based materials at early age combining NDT techniques

  • Barluenga, Gonzalo
  • Puentes, Javier
  • Palomar, Irene
  • Guardia, Cynthia
The chemical process that takes place in Cement Based Materials (CBM) produces microstructural changes and the development of mechanical properties at Early Age (EA). CBM composition, curing conditions (temperature, relative humidity and wind speed) and structural member size can modify the chemical reaction and microstructural development, producing undesirable effects, as EA shrinkage and cracking. Thus, a robust testing methodology is required to monitor CBM at EA. To take advantage of Non-Destructive Tests (NDT) for EA monitoring but considering the uncertainty related to indirect measurements, a testing methodology that combines simultaneous measuring of temperature, capillary pressure, evaporation rate, free shrinkage, and p- and s- waves Ultrasonic Pulse Velocities (UPV) was developed. The multi-parameter technique allows to follow both the chemical, microstructural and mechanical properties development processes that take place in CBM at EA. An integrated analysis allowed defining new EA shrinkage, stress demand estimation and cracking risk models combining EA NDT parameters. The experimental setup presented in this study can be used for pastes and concretes and was verified in laboratory conditions, inside a climate chamber and in on-site real scale applications., The authors gratefully acknowledge the funding grants: CCG-08-UAH/MAT 40, co-funded by the University of Alcala and the Community of Madrid; PPII-2014-022-P co-funded by J C Castilla-La Mancha and FEDER; and SCC_Pump (BIA2013-48480-C2-2-R) and NanoCompaC (BIA2016-77911-R) funded by the Spanish Ministry of Economy and Competitiveness., Peer reviewed
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Quality Control Parameters for on-site evaluation of pumped Self-Compacting Concrete

  • Barluenga Badiola, Gonzalo|||0000-0002-2996-3412
  • Giménez, Mercedes
  • Rodríguez, Ángel
  • Río, Olga
An experimental study comprising laboratory and real scale tests was carried out to evaluate the usefulness of several pumping, early age and hardened parameters for pumped Self-Compacting Concrete (SCC) quality control. Two pumped SCC, with fly ash and limestone filler, were tested. Pumpability was controlled online by real-time measuring of pumping pressure and discharge rate. Temperature, capillary pressure, dimensional stability and P-wave ultrasonic pulse transmission (UPV) were measured simultaneously to monitor microstructure evolution at early age (EA). UPV (P- and S-waves) were also used as non-destructive testing method for hardened quality control. Pumping reduced compressive strength between 12 and 16% and changed air permeability, although did not modify porosity accessible to water. These Quality Control Parameters (QCP) showed their ability to detect the changes on material's pumping, EA and hardened performance. Accordingly, they can be used to establish acceptance limits and to identify potential issues arising from undesired changes in materials properties., Ministerio de Economía y Competitividad
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Methodology for monitoring Cement Based Materials at Early Age combining NDT techniques

  • Barluenga Badiola, Gonzalo|||0000-0002-2996-3412
  • Puentes Mojica, Javier|||0000-0001-8748-7664
  • Palomar Herrero, Irene|||0000-0003-2743-3618
  • Guardia Martín, Cynthia|||0000-0003-4442-8933
The chemical process that takes place in Cement Based Materials (CBM) produces microstructural changes and the development of mechanical properties at Early Age (EA). CBM composition, curing conditions (temperature, relative humidity and wind speed) and structural member size can modify the chemical reaction and microstructural development, producing undesirable effects, as EA shrinkage and cracking. Thus, a robust testing methodology is required to monitor CBM at EA. To take advantage of Non-Destructive Tests (NDT) for EA monitoring but considering the uncertainty related to indirect measurements, a testing methodology that combines simultaneous measuring of temperature, capillary pressure, evaporation rate, free shrinkage, and p- and s- waves Ultrasonic Pulse Velocities (UPV) was developed. The multi-parameter technique allows to follow both the chemical, microstructural and mechanical properties development processes that take place in CBM at EA. An integrated analysis allowed defining new EA shrinkage, stress demand estimation and cracking risk models combining EA NDT parameters. The experimental setup presented in this study can be used for pastes and concretes and was verified in laboratory conditions, inside a climate chamber and in on-site real scale applications., Universidad de Alcalá, Comunidad de Madrid, Junta de Comunidades de Castilla la Mancha, Unión Europea (Fondo Europeo de Desarrollo), Ministerio de Economía y Competitividad
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Effect of curing temperature and relative humidity on early age and hardened properties of SCC

  • Barluenga Badiola, Gonzalo|||0000-0002-2996-3412
  • Guardia Martín, Cynthia|||0000-0003-4442-8933
  • Puentes Mojica, Javier|||0000-0001-8748-7664
The type and particle size of the additions used in SCC influence the setting and early hardening, modifying hydration speed and the development of initial properties. These processes are also altered by the curing temperature and relative humidity (RH) during Early age (EA) and would also affect SCC hardened properties. An experimental study was carried out to compare the effect of different curing temperatures, 10, 20 and 30 ºC, and RH, 40 and 80 %, on EA and hardened properties of SCC incorporating limestone filler (LF), microsilica (MS) and nanosilica (NS). It was observed that temperature modified the reaction speed and the evolution of EA properties while relative humidity affected evaporation and shrinkage at early age and hardened porosity and stiffness. SCC microstructure and pore-network formation were found to depend on the combination of curing conditions and the type and particle size of the additions., Junta de Comunidades de Castilla la Mancha, Unión Europea (Fondo Europeo de Desarrollo), Ministerio de Economía y Competitividad
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Effect of full scale pumping at early age and on hardened microstructure and properties of SCC with fly ash in hot-dry curing conditions

  • Barluenga Badiola, Gonzalo|||0000-0002-2996-3412
  • Giménez, Mercedes
  • Sepulcre Aguilar, Alberto
  • Palomar Herrero, Irene|||0000-0003-2743-3618
An experimental study on the effect of real scale hot-dry climate conditions and full scale cast-in-place by pumping of Self-Compacting Concrete (SCC) with fly ash (FA) was carried out. The influence of water to binder ratio (w/b), mixing scale, curing conditions and cast-in-place by pumping on the early age and hardened properties and on the hardened microstructure were analyzed in SCC samples manufactured in the laboratory, in a full scale concrete plant and in an on-site application of pumped SCC. The aim of the study was to compare the early age and hardened properties of SCC mixtures manufactured in laboratory conditions and in real scale applications. It was found that the samples manufactured outside the laboratory showed changes on their properties that can be related to changes in their microstructure. The increase of w/b produced larger air gaps at the interfacial transition zone (ITZ), increased total porosity and mezzo-porosity and reduced apparent density, compressive strength and ultrasonic pulse parameters. The use of an industrial mixer in hot-dry real scale climate conditions increased w/b required to achieve self-compactability, amplified fly ash reactivity and enlarged air gaps in the ITZ. Cast in-place by pumping in hot-dry climate conditions accelerated cement hydration at early age and increased mezzo-porosity and air permeability, while reduced compressive strength., Ministerio de Economía y Competitividad