Pasar al contenido principal

IMPLEMENTACION DE MODELOS PARA LA ESTIMACION Y CONTROL DE CALIDAD DE LA BOMBEABILIDAD DEL HAC BASADO EN INDICADORES PRESTACIONALES DE BOMBEO

BIA2013-48480-C2-1-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2013
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Influencia de las condiciones de curado en las propiedades a edades tempranas de hormigones autocompactantes con filler calizo, microsílice y nanosílice

  • Barluenga Badiola, Gonzalo
  • Guardia Martín, Cynthia
  • Puentes Mojica, Javier
[ES] La mayor cantidad de pasta requerida para conseguir una mezcla autocompacta, que implica el uso de gran cantidad de material de tamaño de partícula reducida, hace que los hormigones autocompactables (HAC) sean propensos a sufrir problemas derivados de unas condiciones de curado adversas. El presente trabajo evalúa los resultados experimentales del efecto de diferentes combinaciones de temperatura y humedad relativa durante las edades tempranas (primeras 24 horas) sobre la evolución de la microestructura del HAC y sus propiedades una vez endurecido. Se ha comparado el comportamiento de HAC con filler calizo y microsílice y nanosílice en cámara climática sometidos a tres temperaturas (10, 20 y 30 ºC) y dos humedades relativas (40 y 80 %). Las muestras se han monitorizado midiendo su temperatura, presión capilar, evaporación, retracción y la velocidad de transmisión de ondas de ultrasonidos de compresión y cortante. La combinación de estas medidas permite analizar el proceso de formación de la microestructura sólida y de la red porosa del material y el desarrollo de sus incipientes propiedades mecánicas. La temperatura afecta a la velocidad de fraguado y acelera el proceso de endurecimiento, aumentando la retracción a edades tempranas y la HR aumenta la evaporación y la retracción a edades tempranas y la porosidad y el módulo dinámico en estado endurecido., Los autores agradecen a I. Palomar y M. Giménez su contribución en la realización de las mezclas, el suministro de materiales a BASF Construction Chemicals España S.L, Omya Clariana SL y Cementos Portland Valderrivas y la financiación a la Junta de Comunidades de Castilla La Mancha (PII-2014-022-P) (cofinanciado por el Fondo Social Europeo) y al Ministerio Español de Economía y Competitividad (proyectos BIA2013-48480-C2-2-R y BIA2016-77911-R)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of full scale pumping at early age and on hardened microstructure and properties of SCC with fly ash in hot-dry curing conditions

  • Barluenga, Gonzalo
  • Giménez, M.
  • Sepulcre, A.
  • Palomar, Irene
An experimental study on the effect of real scale hot-dry climate conditions and full scale cast-in-place by pumping of Self-Compacting Concrete (SCC) with fly ash (FA) was carried out. The influence of water to binder ratio (w/b), mixing scale, curing conditions and cast-in-place by pumping on the early age and hardened properties and on the hardened microstructure were analyzed in SCC samples manufactured in the laboratory, in a full scale concrete plant and in an on-site application of pumped SCC. The aim of the study was to compare the early age and hardened properties of SCC mixtures manufactured in laboratory conditions and in real scale applications. It was found that the samples manufactured outside the laboratory showed changes on their properties that can be related to changes in their microstructure. The increase of w/b produced larger air gaps at the interfacial transition zone (ITZ), increased total porosity and mezzo-porosity and reduced apparent density, compressive strength and ultrasonic pulse parameters. The use of an industrial mixer in hot-dry real scale climate conditions increased w/b required to achieve self-compactability, amplified fly ash reactivity and enlarged air gaps in the ITZ. Cast in-place by pumping in hot-dry climate conditions accelerated cement hydration at early age and increased mezzo-porosity and air permeability, while reduced compressive strength., The study has been financed by the Spanish Ministry of Economy and Competitiveness, grants BIA2013-48480-C2-2-R, BIA2013-48480-C2-1-R and BIA2016-77911-R. The authors greatly acknowledge the support of the companies OHL and SIKA Spain., Peer reviewed
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Quality Control Parameters for on-site evaluation of pumped Self-Compacting Concrete

  • Barluenga Badiola, Gonzalo|||0000-0002-2996-3412
  • Giménez, Mercedes
  • Rodríguez, Ángel
  • Río, Olga
An experimental study comprising laboratory and real scale tests was carried out to evaluate the usefulness of several pumping, early age and hardened parameters for pumped Self-Compacting Concrete (SCC) quality control. Two pumped SCC, with fly ash and limestone filler, were tested. Pumpability was controlled online by real-time measuring of pumping pressure and discharge rate. Temperature, capillary pressure, dimensional stability and P-wave ultrasonic pulse transmission (UPV) were measured simultaneously to monitor microstructure evolution at early age (EA). UPV (P- and S-waves) were also used as non-destructive testing method for hardened quality control. Pumping reduced compressive strength between 12 and 16% and changed air permeability, although did not modify porosity accessible to water. These Quality Control Parameters (QCP) showed their ability to detect the changes on material's pumping, EA and hardened performance. Accordingly, they can be used to establish acceptance limits and to identify potential issues arising from undesired changes in materials properties., Ministerio de Economía y Competitividad
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Effect of full scale pumping at early age and on hardened microstructure and properties of SCC with fly ash in hot-dry curing conditions

  • Barluenga Badiola, Gonzalo|||0000-0002-2996-3412
  • Giménez, Mercedes
  • Sepulcre Aguilar, Alberto
  • Palomar Herrero, Irene|||0000-0003-2743-3618
An experimental study on the effect of real scale hot-dry climate conditions and full scale cast-in-place by pumping of Self-Compacting Concrete (SCC) with fly ash (FA) was carried out. The influence of water to binder ratio (w/b), mixing scale, curing conditions and cast-in-place by pumping on the early age and hardened properties and on the hardened microstructure were analyzed in SCC samples manufactured in the laboratory, in a full scale concrete plant and in an on-site application of pumped SCC. The aim of the study was to compare the early age and hardened properties of SCC mixtures manufactured in laboratory conditions and in real scale applications. It was found that the samples manufactured outside the laboratory showed changes on their properties that can be related to changes in their microstructure. The increase of w/b produced larger air gaps at the interfacial transition zone (ITZ), increased total porosity and mezzo-porosity and reduced apparent density, compressive strength and ultrasonic pulse parameters. The use of an industrial mixer in hot-dry real scale climate conditions increased w/b required to achieve self-compactability, amplified fly ash reactivity and enlarged air gaps in the ITZ. Cast in-place by pumping in hot-dry climate conditions accelerated cement hydration at early age and increased mezzo-porosity and air permeability, while reduced compressive strength., Ministerio de Economía y Competitividad