Pasar al contenido principal

NANOTECNOLOGIA APLICADA A LA MEJORA DE LA PUESTA EN OBRA Y MADURACION DE MEZCLAS AUTOCOMPACTANTES. CARACTERIZACION Y METODOLOGIA EXPERIMENTAL MULTIESCALA

BIA2016-77911-R

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2016
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE ALCALA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 15
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Influencia de las condiciones de curado en las propiedades a edades tempranas de hormigones autocompactantes con filler calizo, microsílice y nanosílice

  • Barluenga Badiola, Gonzalo
  • Guardia Martín, Cynthia
  • Puentes Mojica, Javier
[ES] La mayor cantidad de pasta requerida para conseguir una mezcla autocompacta, que implica el uso de gran cantidad de material de tamaño de partícula reducida, hace que los hormigones autocompactables (HAC) sean propensos a sufrir problemas derivados de unas condiciones de curado adversas. El presente trabajo evalúa los resultados experimentales del efecto de diferentes combinaciones de temperatura y humedad relativa durante las edades tempranas (primeras 24 horas) sobre la evolución de la microestructura del HAC y sus propiedades una vez endurecido. Se ha comparado el comportamiento de HAC con filler calizo y microsílice y nanosílice en cámara climática sometidos a tres temperaturas (10, 20 y 30 ºC) y dos humedades relativas (40 y 80 %). Las muestras se han monitorizado midiendo su temperatura, presión capilar, evaporación, retracción y la velocidad de transmisión de ondas de ultrasonidos de compresión y cortante. La combinación de estas medidas permite analizar el proceso de formación de la microestructura sólida y de la red porosa del material y el desarrollo de sus incipientes propiedades mecánicas. La temperatura afecta a la velocidad de fraguado y acelera el proceso de endurecimiento, aumentando la retracción a edades tempranas y la HR aumenta la evaporación y la retracción a edades tempranas y la porosidad y el módulo dinámico en estado endurecido., Los autores agradecen a I. Palomar y M. Giménez su contribución en la realización de las mezclas, el suministro de materiales a BASF Construction Chemicals España S.L, Omya Clariana SL y Cementos Portland Valderrivas y la financiación a la Junta de Comunidades de Castilla La Mancha (PII-2014-022-P) (cofinanciado por el Fondo Social Europeo) y al Ministerio Español de Economía y Competitividad (proyectos BIA2013-48480-C2-2-R y BIA2016-77911-R)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Efecto de la fisuración a edades tempranas en la durabilidad de hormigones autocompactantes

  • Barluenga Badiola, Gonzalo
  • Puentes Mojica, Javier
  • Guardia Martín, Cynthia
  • Flores Medina, Nelson
[ES] Para evaluar la mejora producida por diferentes adiciones, tales como filler calizo, microsílice, nanosílice y metacaolín, en la durabilidad química de HAC, se ha llevado a cabo un estudio experimental con dos objetivos. Primero, se evaluó la permeabilidad al aire y al agua en muestras de HAC no fisuradas de 5 años de edad y se constató que los valores de la permeabilidad al aire fueron similares en los HAC con y sin adiciones minerales. Posteriormente, se evaluó la resistencia de HAC frente a ambientes agresivos, relacionando la permeabilidad del material con ensayos comportamiento del material en entornos ácidos, como son el ácido acético y el ácido sulfúrico. Se observó que la resistencia química frente a ambientes ácidos depende no sólo de la permeabilidad del material, sino que también depende del tipo de ácido empleado y de la adición mineral., Los autores agradecen a la Junta de Comunidades de Castilla La Mancha la financiación del proyecto PII-2014-022-P (cofinanciado por el Fondo Social Europeo) y al Ministerio Español de Economía y Competitividad por la financiación de los proyectos BIA2013- 48480-C2-2-R y BIA2016-77911-R (cofinanciado por el Fondo Social Europeo)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Rheological characterization of self-compacting concrete pastes with polymeric admixtures

  • Palomar, Irene
  • Barluenga, Gonzalo
  • Guardia, Cynthia
  • Alonso, M. Cruz
  • Álvarez, Marina
Multipurpose admixtures such as superplasticizers (SP), viscosity modifying agents (VMA) and superabsorbent polymers (SAP) are polymers commonly used in self-compacting concrete (SCC). Their main effect is positive for SCC fresh properties, minimizing some technical barriers of SCC production and cast in-place technology. However, they also affect fresh SCC rheological properties. This study addresses the rheological behaviour of fluid SCC pastes, modified with SP, VMA, SAP and their combined effects and interactions. A cement-limestone filler blended paste and two water-to-binder ratio (w/b) were designed as a reference mixture. Three dosages of VMA and SAP, 0.2%, 0.4% and 1.0% of cement weight, were investigated. The kinetics of water uptake of VMA and SAP admixtures were compared using the tea bag test in neutral pH and alkaline pH solutions. Additionally, SP was added to achieve a similar slump flow with final spread diameters of 300 mm and 400 mm, on pastes with and without VMA and SAP. The rheological parameters of the fresh pastes were tested with the mini-cone slump test. Final spread diameter, final height and time to final spread were measured after the mixing. It was found that the effectiveness of SP on the final spread diameter depended on the w/b ratio of reference paste. On the other hand, VMA increased the time to final spread, while slightly reducing the final spread diameter. SAP affected the maximum diameter due to water absorption kinetics and an increase of w/b ratio was needed to achieve similar spread diameters. It was observed that the combined use of SP and VMA or SAP affected the measured parameters. The particular effects of SP, VMA and SAP admixtures on the rheological parameters depended on w/b ratio, the amount of polymer and the combination of components., Financial support was provided by NanoCompaC (BIA2016-77911-R), funded by the Spanish Ministry of Economy & Competitiveness and postdoctoral fellowship (Ayuda Postdoctoral/Modalidad A/2017), funded by UAH (Spain). Some of the components were supplied by BASF Construction Chemicals Spain S.L, Omya Clariana S.L, and Portland Cement Vaderrivas.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of curing temperature and relative humidity on early age and hardened properties of SCC

  • Barluenga, Gonzalo
  • Guardia, Cynthia
  • Puentes, Javier
The type and particle size of the additions used in SCC influence the setting and early hardening, modifying hydration speed and the development of initial properties. These processes are also altered by the curing temperature and relative humidity (RH) during Early age (EA) and would also affect SCC hardened properties. An experimental study was carried out to compare the effect of different curing temperatures, 10, 20 and 30 °C, and RH, 40 and 80%, on EA and hardened properties of SCC incorporating limestone filler (LF), microsilica (MS) and nanosilica (NS). It was observed that temperature modified the reaction speed and the evolution of EA properties while relative humidity affected evaporation and shrinkage at early age and hardened porosity and stiffness. SCC microstructure and pore-network formation were found to depend on the combination of curing conditions and the type and particle size of the additions., SL and Cementos Portland Valderrivas and the financial support provided by the grants: PII-14-022-P, co-funded by JC Castilla-La Mancha and FEDER and BIA2013-48480-C2-2-R and BIA2016-77911-R, funded by the Spanish Ministry of Economy and Competitiveness., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of full scale pumping at early age and on hardened microstructure and properties of SCC with fly ash in hot-dry curing conditions

  • Barluenga, Gonzalo
  • Giménez, M.
  • Sepulcre, A.
  • Palomar, Irene
An experimental study on the effect of real scale hot-dry climate conditions and full scale cast-in-place by pumping of Self-Compacting Concrete (SCC) with fly ash (FA) was carried out. The influence of water to binder ratio (w/b), mixing scale, curing conditions and cast-in-place by pumping on the early age and hardened properties and on the hardened microstructure were analyzed in SCC samples manufactured in the laboratory, in a full scale concrete plant and in an on-site application of pumped SCC. The aim of the study was to compare the early age and hardened properties of SCC mixtures manufactured in laboratory conditions and in real scale applications. It was found that the samples manufactured outside the laboratory showed changes on their properties that can be related to changes in their microstructure. The increase of w/b produced larger air gaps at the interfacial transition zone (ITZ), increased total porosity and mezzo-porosity and reduced apparent density, compressive strength and ultrasonic pulse parameters. The use of an industrial mixer in hot-dry real scale climate conditions increased w/b required to achieve self-compactability, amplified fly ash reactivity and enlarged air gaps in the ITZ. Cast in-place by pumping in hot-dry climate conditions accelerated cement hydration at early age and increased mezzo-porosity and air permeability, while reduced compressive strength., The study has been financed by the Spanish Ministry of Economy and Competitiveness, grants BIA2013-48480-C2-2-R, BIA2013-48480-C2-1-R and BIA2016-77911-R. The authors greatly acknowledge the support of the companies OHL and SIKA Spain., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Methodology for monitoring cement based materials at early age combining NDT techniques

  • Barluenga, Gonzalo
  • Puentes, Javier
  • Palomar, Irene
  • Guardia, Cynthia
The chemical process that takes place in Cement Based Materials (CBM) produces microstructural changes and the development of mechanical properties at Early Age (EA). CBM composition, curing conditions (temperature, relative humidity and wind speed) and structural member size can modify the chemical reaction and microstructural development, producing undesirable effects, as EA shrinkage and cracking. Thus, a robust testing methodology is required to monitor CBM at EA. To take advantage of Non-Destructive Tests (NDT) for EA monitoring but considering the uncertainty related to indirect measurements, a testing methodology that combines simultaneous measuring of temperature, capillary pressure, evaporation rate, free shrinkage, and p- and s- waves Ultrasonic Pulse Velocities (UPV) was developed. The multi-parameter technique allows to follow both the chemical, microstructural and mechanical properties development processes that take place in CBM at EA. An integrated analysis allowed defining new EA shrinkage, stress demand estimation and cracking risk models combining EA NDT parameters. The experimental setup presented in this study can be used for pastes and concretes and was verified in laboratory conditions, inside a climate chamber and in on-site real scale applications., The authors gratefully acknowledge the funding grants: CCG-08-UAH/MAT 40, co-funded by the University of Alcala and the Community of Madrid; PPII-2014-022-P co-funded by J C Castilla-La Mancha and FEDER; and SCC_Pump (BIA2013-48480-C2-2-R) and NanoCompaC (BIA2016-77911-R) funded by the Spanish Ministry of Economy and Competitiveness., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Efecto de la fisuración a edades tempranas en la durabilidad de hormigones autocompactantes

  • Barluenga, Gonzalo
  • Puentes, Javier
  • Guardia, Cynthia
  • Flores Medina, Nelson
Trabajo presentado al V Congreso Iberoamericano de Hormigón Autocompactante (HAC), celebrado en la Universitat Politècnica de València (UPV), España, durante los días 5 y 6 de Marzo de 2018., El uso de Hormigones autocompactantes (HAC) se ha incrementado durante los últimos años. Su comportamiento a edades tempranas (ET), junto a su facilidad de colocación aporta ventajas constructivas para la industria del hormigón encofrado in situ. Las propiedades autonivelantes y su capacidad de distribuirse con facilidad por la acción de su propio peso sin sufrir segregación obedecen al incremento de finos y a la reducción del tamaño de partículas en la mezcla. El uso de adiciones como el filler calizo, nanosílice, microsílice, metacaolín incrementa el volumen de la pasta y se considera que mejora la durabilidad del hormigón de resistencias moderadas. Sin embargo esta variación también afecta el proceso de hidratación y la formación de la microestructura en la medida que el material adquiere la estructura rígida. Para evaluar la mejora producida por las diferentes adiciones en el comportamiento a edades tempranas en condiciones de curado adversas y sus consecuencias en la durabilidad a largo plazo, se ha llevado a cabo un estudio experimental. El estudio se desarrolló en dos partes. Durante la primera etapa se monitorizó el proceso de formación de la microestructura en las primeras 24 horas bajo condiciones controladas de laboratorio (desecación superficial producida por efecto del viento) incrementando el riesgo de fisuración, y los efectos en la formación de la microestructura porosa del hormigón joven. En la segunda etapa, se midió la permeabilidad al aire y al agua en muestras de HAC que sufrieron fisuración a edades tempranas y otras no fisuradas de 5 años de edad. Se constató que las muestras fisuradas tienen una mayor permeabilidad al aire y al agua que las no fisuradas y que los valores de la permeabilidad al aire fueron similares en los HAC con adiciones minerales. A la vista de estos resultados se puede afirmar que la permeabilidad a largo plazo de los HAC estudiados depende más de la fisuración a edades tempranas que de la composición de la muestra. Una vez establecidos la permeabilidad, se evaluó la capacidad de las diferentes dosificaciones de soportar el ataque en ambientes agresivos, relacionando la permeabilidad del material con ensayos de velocidad de carbonatación, permeabilidad a cloruros, ensayo hielo-deshielo y comportamiento en entornos ácidos., Los autores agradecen a la Junta de Comunidades de Castilla La Mancha la financiación del proyecto PII-2014-022-P (cofinanciado por el Fondo Social Europeo) y al Ministerio Español de Economía y Competitividad por la financiación de los proyectos BIA2013-48480-C2-2-R y BIA2016-77911-R (cofinanciado por el Fondo Social Europeo)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Influencia de las condiciones de curado en las propiedades a edades tempranas de hormigones autocompactantes con filler calizo, microsílice y nanosílice

  • Barluenga, Gonzalo
  • Guardia, Cynthia
  • Puentes, Javier
Trabajo presentado al V Congreso Iberoamericano de Hormigón Autocompactante (HAC), celebrado en la Universitat Politècnica de València (UPV), España, durante los días 5 y 6 de Marzo de 2018., Los hormigones autocompactables (HAC) presentan muchas ventajas respecto a las mezclas convencionales debido a su facilidad de puesta en obra y fiabilidad de ejecución, reduciendo el trabajo en obra. Sin embargo, la mayor cantidad de pasta requerida para conseguir una mezcla autocompacta, que implica el uso de gran cantidad de material de tamaño de partícula reducida, hace que los HAC sean propensos a sufrir problemas derivados de unas condiciones de curado adversas. El uso de adiciones como la Microsílice y Nanosílice en HAC con alto contenido en filler calizo puede ser útil para mejorar las propiedades en estado endurecido e incrementar su durabilidad, constituyendo una solución sostenible para aplicaciones donde se requiere una resistencia moderada. El uso de estas adiciones modifica los procesos de fraguado y endurecimiento durante las primeras edades del hormigón, por lo que se requiere de un estudio particularizado del efecto de cada tipo de adición en el proceso. El presente trabajo expone los resultados experimentales dirigidos a evaluar el efecto de diferentes combinaciones de temperatura y humedad relativa durante las edades tempranas (primeras 24 horas) sobre la evolución de la microestructura del HAC y sus propiedades una vez endurecido. Se ha comparado el comportamiento de HAC con microsílice y nanosílice en cámara climática sometidos a tres temperaturas (10, 20 y 30 ºC) y dos humedades relativas (40 y 80 %). Las muestras se han monitorizado midiendo su temperatura, presión capilar, evaporación, retracción, Velocidad de transmisión de ondas de ultrasonidos de compresión y cortante. La combinación de estas medidas permite analizar el proceso de formación de la microestructura sólida y de la red porosa del material y el desarrollo de sus incipientes propiedades mecánicas. Se ha comprobado que el efecto en el fraguado del HAC, tanto de las adiciones reactivas como de su tamaño de partícula, depende de la combinación de los parámetros ambientales de curado y que estos afectan, además, a las propiedades del HAC endurecido., Los autores agradecen a I. Palomar y M. Giménez su contribución en la realización de las mezclas, el suministro de materiales a BASF Construction Chemicals España S.L, Omya Clariana SL y Cementos Portland Valderrivas y la financiación a la Junta de Comunidades de Castilla La Mancha (PII-2014-022-P) (cofinanciado por el Fondo Social Europeo) y al Ministerio Español de Economía y Competitividad (proyectos BIA2013-48480-C2-2-R y BIA2016-77911-R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Long term permeability and acid resistance of self- compacting concretes with micro and nano mineral additions

  • Barluenga, Gonzalo
  • Guardia, Cynthia
  • Puentes, Javier
  • Flores Medina, Nelson
Trabajo presentado a la Sixth International Conference on Durability of Concrete Structures, celebrada en la Universitdad de Leeds (UK) del 18 al 20 de julio de 2018., Self-Compacting Concrete (SCC) can incorporate different types of Supplementary cementitious materials (SCM), as filler and other active mineral additions, to increase the amount of paste without increasing the amount of cement. SCM modify the SCC hardened microstructure due to the filler effect, the seeding effect as nucleation points for hydration products and the pozzolanic effect in the case of reactive SCM, as mineral additions (MA). The pore network is also modified which produce changes in the permeability of SCC. It is generally considered that the increase of fine particles improves SCC durability due to the larger compactness of the hardened material. However, MA also modifies the hydration process and consequently the hardened microstructure that could, in some cases, reduce the chemical resistance. Accordingly, the durability of SCC can also be modified by the use of MA due to the combination of permeability and chemical resistance, which mainly depends on the paste phase of the composite. When subjected to chemical attacks, SCC with MA would also modify the microstructure and the permeability properties in the long term. In order to evaluate the effect of different mineral additions, as limestone filler, microsilica, nanosilica and metakaolin, on SCC long term performance and assess their impact on its durability, an experimental study was carried out. Air and water permeability was measured on 5 years old samples SCC with different MA. It was seen that SCC air permeability was similar independently of the MA type and amount used. The samples were then subjected to acetic and sulfuric acid attacks. It was observed that the chemical resistance against acids depended on both permeability, the type of acid and the MA. The particle size and reactivity of the MA also contributed to the chemical resistance and therefore, to SCC durability., The authors acknowledge the projects PII-2014-022-P funded by the Junta de Comunidades de Castilla La Mancha and BIA2013-48480-C2-2-R and BIA2016-77911-R funded by Ministerio Español de Economía y Competitividad (cofunded by FEDER).
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Methodology for monitoring Cement Based Materials at Early Age combining NDT techniques

  • Barluenga Badiola, Gonzalo|||0000-0002-2996-3412
  • Puentes Mojica, Javier|||0000-0001-8748-7664
  • Palomar Herrero, Irene|||0000-0003-2743-3618
  • Guardia Martín, Cynthia|||0000-0003-4442-8933
The chemical process that takes place in Cement Based Materials (CBM) produces microstructural changes and the development of mechanical properties at Early Age (EA). CBM composition, curing conditions (temperature, relative humidity and wind speed) and structural member size can modify the chemical reaction and microstructural development, producing undesirable effects, as EA shrinkage and cracking. Thus, a robust testing methodology is required to monitor CBM at EA. To take advantage of Non-Destructive Tests (NDT) for EA monitoring but considering the uncertainty related to indirect measurements, a testing methodology that combines simultaneous measuring of temperature, capillary pressure, evaporation rate, free shrinkage, and p- and s- waves Ultrasonic Pulse Velocities (UPV) was developed. The multi-parameter technique allows to follow both the chemical, microstructural and mechanical properties development processes that take place in CBM at EA. An integrated analysis allowed defining new EA shrinkage, stress demand estimation and cracking risk models combining EA NDT parameters. The experimental setup presented in this study can be used for pastes and concretes and was verified in laboratory conditions, inside a climate chamber and in on-site real scale applications., Universidad de Alcalá, Comunidad de Madrid, Junta de Comunidades de Castilla la Mancha, Unión Europea (Fondo Europeo de Desarrollo), Ministerio de Economía y Competitividad
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Lateral pressure of nano-engineered SCC combining nanoclays, nanosilica and viscosity modifying admixtures

  • Varela Recio, Hugo|||0000-0001-8094-6071
  • Barluenga Badiola, Gonzalo|||0000-0002-2996-3412
  • Puentes Mojica, Javier|||0000-0001-8748-7664
  • Palomar Herrero, Irene|||0000-0003-2743-3618
  • Rodríguez López, Ángel José Alfredo
Self-compacting concrete (SCC) is an energy efficient building technology widely used for multiple constructive applications. However, the large flowability of fresh SCC produces an increase of the lateral pressure exerted on the formwork regarding to conventional concretes. One solution to reduce the maximum lateral pressure (Pmax) is to modulate the fresh performance of SCC by the addition of rheology modifiers. Among them, nanocomponents highlight due to their larger efficiency derived from their tiny particle size. In this study, the efficiency of nano-engineered SCC (NE-SCC) combining small amounts of nanocomponents, as nanoclays and nanosilica, with viscosity modifying admixtures (VMAs) to decrease Pmax is explored. Lateral pressure exerted by NE-SCC on cylindrical columns subjected to self-weight and to air pressure was assessed using wall and capillary pressure sensors over time. It was found that the incorporation of attapulgite and bentonite nanoclays combined with VMAs could reduce Pmax. This reduction was measured with wall and capillary pressure sensors on self-weight column and air pressure column laboratory tests, and good correlation between them over time was obtained. A predictive model of the maximum lateral Pressure (Pmax) and its evolution over time (PL) was proposed, related to SCC paste thixotropy (Athix,p), casting height (H) and SCC pressure decay coefficient (Cd)., Ministerio de Economía y Competitividad, Ministerio de Ciencia e Innovación, Universidad de Alcalá
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Effect of curing temperature and relative humidity on early age and hardened properties of SCC

  • Barluenga Badiola, Gonzalo|||0000-0002-2996-3412
  • Guardia Martín, Cynthia|||0000-0003-4442-8933
  • Puentes Mojica, Javier|||0000-0001-8748-7664
The type and particle size of the additions used in SCC influence the setting and early hardening, modifying hydration speed and the development of initial properties. These processes are also altered by the curing temperature and relative humidity (RH) during Early age (EA) and would also affect SCC hardened properties. An experimental study was carried out to compare the effect of different curing temperatures, 10, 20 and 30 ºC, and RH, 40 and 80 %, on EA and hardened properties of SCC incorporating limestone filler (LF), microsilica (MS) and nanosilica (NS). It was observed that temperature modified the reaction speed and the evolution of EA properties while relative humidity affected evaporation and shrinkage at early age and hardened porosity and stiffness. SCC microstructure and pore-network formation were found to depend on the combination of curing conditions and the type and particle size of the additions., Junta de Comunidades de Castilla la Mancha, Unión Europea (Fondo Europeo de Desarrollo), Ministerio de Economía y Competitividad
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Effect of full scale pumping at early age and on hardened microstructure and properties of SCC with fly ash in hot-dry curing conditions

  • Barluenga Badiola, Gonzalo|||0000-0002-2996-3412
  • Giménez, Mercedes
  • Sepulcre Aguilar, Alberto
  • Palomar Herrero, Irene|||0000-0003-2743-3618
An experimental study on the effect of real scale hot-dry climate conditions and full scale cast-in-place by pumping of Self-Compacting Concrete (SCC) with fly ash (FA) was carried out. The influence of water to binder ratio (w/b), mixing scale, curing conditions and cast-in-place by pumping on the early age and hardened properties and on the hardened microstructure were analyzed in SCC samples manufactured in the laboratory, in a full scale concrete plant and in an on-site application of pumped SCC. The aim of the study was to compare the early age and hardened properties of SCC mixtures manufactured in laboratory conditions and in real scale applications. It was found that the samples manufactured outside the laboratory showed changes on their properties that can be related to changes in their microstructure. The increase of w/b produced larger air gaps at the interfacial transition zone (ITZ), increased total porosity and mezzo-porosity and reduced apparent density, compressive strength and ultrasonic pulse parameters. The use of an industrial mixer in hot-dry real scale climate conditions increased w/b required to achieve self-compactability, amplified fly ash reactivity and enlarged air gaps in the ITZ. Cast in-place by pumping in hot-dry climate conditions accelerated cement hydration at early age and increased mezzo-porosity and air permeability, while reduced compressive strength., Ministerio de Economía y Competitividad
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Synergies on rheology and structural build-up of fresh cement pastes with nanoclays, nanosilica and viscosity modifying admixtures

  • Varela Recio, Hugo|||0000-0001-8094-6071
  • Barluenga Badiola, Gonzalo|||0000-0002-2996-3412
  • Palomar Herrero, Irene|||0000-0003-2743-3618
  • Sepulcre Aguilar, Alberto
Nanoclays, nanosilica and viscosity modifying admixtures can be used to tune rheological properties of cement pastes, in order to fulfill the requirements for non-conventional cast-in-place techniques. An experimental study on cement paste rheology was carried out to evaluate their combined effects on fluid cement pastes" properties. A reference paste with cement blended with limestone filler and a low water to binder ratio was designed. A high range water reducing admixture (HRWRA), three types of viscosity modifying admixtures (VMA), and five nanocomponents (nanosilica and four different nanoclays) were added. Flowability, initial rheological properties and structural build-up of cement pastes were assessed with mini-cone slump test and dynamic shear rheometer test (DSR). The synergies between nanoclays, nanosilica and VMAs were evaluated. It was observed that an adequate combination of admixtures and nanoclays reduced the amount of HRWRA required to achieve target flowability, regarding the same components uncombined. The type and amount of VMAs and nanocomponents also produced changes on yield stress, viscosity and structural build-up. Their effect on structural build-up of fresh paste was related to reversible and non-reversible mechanisms, comparing the reduction of spread diameter of fresh samples stirred and left at rest over time measured with the mini-cone., Ministerio de Economía y Competitividad, Ministerio de Ciencia e Innovación
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Influence of nanoclays on flowability and rheology of SCC pastes

  • Varela Recio, Hugo|||0000-0001-8094-6071
  • Barluenga Badiola, Gonzalo|||0000-0002-2996-3412
  • Palomar Herrero, Irene|||0000-0003-2743-3618
SCC rheology is the key factor of fresh performance and its control is required to overcome cast in place issues regarding pumping and formwork lateral pressure that still limits its widespread use. Nanoclays are good candidates to improve rheological properties of cement pastes as yield stress, viscosity and thixotropy, controlling paste flow behavior. However, some interactions between nanoclays and admixtures can limit their efficiency. In this study, a comparative analysis on rheology and flowability of SCC cement pastes blended with limestone filler and 2 % by cement weight of four types of nanoclays, attapulgite, bentonite, and sepiolite in powder form and dispersed in water, is presented. Two water to binder ratios (w/b), 0.35 and 0.45, were considered and a high range water reducing admixture (HRWRA) was used to reach the required flowability. Water adsorption of nanoclays, flowability and rheological properties of SCC cement pastes with nanoclays were evaluated. It was found that HRWRA was less effective on pastes with nanoclays and low w/b, particularly bentonite. Sepiolite showed larger water adsorption and higher enhancing of rheological properties. It was observed that, the relation of nanoclays and HRWRA was decisive to produce flowability on pastes with low w/b. Besides, flowability was deeply affected by w/b, as water saturation of nanoclays increased HRWRA efficiency. All nanoclays modified rheological properties due to its different particles morphology characteristics, however sepiolite showed the largest effects and reached the higher values of yield stress, viscosity and thixotropy ratios used., Ministerio de Economía y Competitividad