Pasar al contenido principal

LA AIREACION DEL FLUJO Y SU IMPLEMENTACION EN PROTOTIPO PARA LA MEJORA DE LA DISIPACION DE ENERGIA DE LA LAMINA VERTIENTE POR RESALTO HIDRAULICO EN DISTINTOS TIPOS DE PRESAS

BIA2017-85412-C2-1-R

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2017
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Characterization of Structural Properties in High Reynolds Hydraulic Jump Based on CFD and Physical Modeling Approaches

  • Macián Pérez, Juan Francisco
  • Bayón, Arnau|||0000-0001-5007-0208
  • García-Bartual, Rafael|||0000-0002-1811-8264
  • López Jiménez, Petra Amparo|||0000-0002-7043-3683
  • Vallés-Morán, F. J.|||0000-0001-6335-1746
[EN] A classical hydraulic jump with Froude number (Fr1=6) and Reynolds number (Re1=210,000) was characterized using the computational fluid dynamics (CFD) codes OpenFOAM and FLOW-3D, whose performance was assessed. The results were compared with experimental data from a physical model designed for this purpose. The most relevant hydraulic jump characteristics were investigated, including hydraulic jump efficiency, roller length, free surface profile, distributions of velocity and pressure, and fluctuating variables. The model outcome was also compared with previous results from the literature. Both CFD codes were found to represent with high accuracy the hydraulic jump surface profile, roller length, efficiency, and sequent depths ratio, consistently with previous research. Some significant differences were found between both CFD codes regarding velocity distributions and pressure fluctuations, although in general the results agree well with experimental and bibliographical observations. This finding makes models with these characteristics suitable for engineering applications involving the design and optimization of energy dissipation devices., The research presented herein was possible thanks to the Generalitat Valenciana predoctoral grants [Ref. (2015/7521)], in collaboration with the European Social Funds and to the research project La aireacion del flujo y su implementacion en prototipo para la mejora de la disipacion de energia de la lamina vertiente por resalto hidraulico en distintos tipos de presas (BIA2017-85412-C2-1-R), funded by the Spanish Ministry of Economy.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Numerical modeling of hydraulic jumps at negative steps to improve energy dissipation in stilling basins

  • Macián-Pérez, Juan Francisco
  • García-Bartual, Rafael|||0000-0002-1811-8264
  • López Jiménez, Petra Amparo|||0000-0002-7043-3683
  • Vallés-Morán, F. J.|||0000-0001-6335-1746
[EN] The performance of stilling basins including a negative step was analyzed addressing its effect on the energy dissipation efficiency, dimensions and structural properties of the hydraulic jump, streambed pressures and pressure fluctuations. Six different cases were simulated, considering two possible relative heights for the step and three possible Froude numbers. The results show that the step yields to lower subcritical depths, allowing smaller basin dimensions. Nevertheless, it tends to slightly increase the roller length of the jump. Concerning the relative energy dissipation, results confirm the improvement derived from the step presence. The internal flow occurring in the jump was also analyzed, and more specifically the subzones generated upstream and downstream the impingement point. The results prove the contribution of the negative step in the stabilization of hydraulic jumps in the stilling basin. In particular, a general decrease of the streambed pressure is observed. In addition, pressure fluctuations are significantly reduced due to the negative step size influence on the hydraulic jump. Furthermore, the effectiveness of the computational fluid dynamics (CFD) techniques to simulate stilling basin flows and to adequately characterize the hydraulic jump performance was confirmed, The work was supported by the research project: 'La aireacion del flujo y su implementacion en prototipo para la mejora de la disipacion de energia de la lamina vertiente por resalto hidraulico en distintos tipos de presas' (BIA2017-85412-C2-1-R), funded by the Spanish Agencia Estatal de Investigacion and FEDER.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Assessment of the Performance of a Modified USBR Type II Stilling Basin by a Validated CFD Model

  • Macián-Pérez, Juan Francisco
  • Vallés-Morán, F. J.|||0000-0001-6335-1746
  • García-Bartual, Rafael|||0000-0002-1811-8264
[EN] The adaptation of existing dams is of paramount importance to face the challenge posed by climate change and new legal frameworks. Thus, it is crucial to optimize the design of stilling basins to reduce the hydraulic jump dimensions without jeopardizing the energy dissipation in the structure. A numerical model was developed to simulate a US Bureau of Reclamation Type II basin. The model was validated with a specifically designed physical model and then was used to simulate and test the performance of the basin after adding a second row of chute blocks. The results showed a reduction in the hydraulic jump dimensions in terms of the sequent depth ratio and the roller length, which were respectively 2.5% and 1.4% lower in the modified design. These results would allow an estimated increase of the discharge in the basin close to 10%. Furthermore, this new design had 1.2% higher efficiency. Consequently, the modifications proposed for the basin design suggest improved performance of the structure. The issue of the hydraulic jump length estimation also was discussed, and different approaches were introduced and compared. These methods follow a structured and systematic procedure and gave consistent results for the developed models., The authors acknowledge the collaboration of the Hydraulics Laboratory of the Department of Hydraulic Engineering and Environment from Universitat Politecnica de Valencia (UPV) and their technicians Juan Carlos Edo and Joaquin Oliver in the construction of the experimental device used for the numerical model setup and validation. The work was supported by the research project "La aireacion del flujo y su implementacion en prototipo para la mejora de la disipacion de energia de la lamina vertiente por resalto hidraulico en distintos tipos de presas" (BIA2017-85412-C2-1-R), funded by the Spanish Agencia Estatal de Investigacion and FEDER.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Diseño de jetbox para transición de flujo a presión a lámina libre con técnicas CFD, Design of jetbox for transition from pressurized flow to free surface using CFD modeling

  • Bayón, Arnau|||0000-0001-5007-0208
  • Vallés-Morán, F. J.|||0000-0001-6335-1746
[EN] The hydraulic analysis of dam stilling basins requires employing experimental models. Given that building a scaled spillway respecting similarity laws is not always possible, it is common practice to supply the device using a pressurized facility thanks to a jetbox or nozzle that makes the pressurized flow become free surface. Little attention is paid to this crucial device design, so this work proposes its design using a threedimensional CFD model with RANS RNG k-¿ for turbulence modeling. The minimum values of certain dimensions, such as stretch lengths or expansion/contraction coefficients, to avoid introducing excessive bias in the future experimental model are computed and the consequences of these parameters on results are reported and discussed., [ES] El análisis hidráulico de los cuencos de amortiguación de presas requiere el empleo de modelos experimentales. Dado que no siempre es posible construir un aliviadero a escala respetando las leyes de semejanza, es habitual alimentar el dispositivo mediante una instalación a presión gracias a un jetbox o tobera que haga pasar el flujo a presión a lámina libre. Poca atención se presta al diseño de este dispositivo crucial, por lo que el presente trabajo plantea su diseño mediante un modelo CFD tridimensional con modelo RANS RNG k-¿ para el tratamiento de la turbulencia. Los valores mínimos de determinadas dimensiones, como las longitudes de cada tramo o los coeficientes de expansión o contracción, para no introducir excesivo sesgo en el futuro modelo experimental son calculados y las repercusiones de estos parámetros en los resultados representados y analizados., Este trabajo ha sido desarrollado en el contexto del proyecto “LA AIREACION DEL FLUJO Y SU IMPLEMENTACION EN PROTOTIPO PARA LA MEJORA DE LA DISIPACION DE ENERGIA DE LA LAMINA VERTIENTE POR RESALTO HIDRAULICO EN DISTINTOS TIPOS DE PRESAS” (BIA2017-85412-C2-1R-AR), financiado por la Agencia Estatal de Investigación (España).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Estudio de la superficie libre de resaltos hidráulicos en cuencos amortiguadores empleando técnicas LIDAR, Hydraulic jump free surface study in stilling basins employing LIDAR techniques

  • Macián-Pérez, Juan Francisco
  • De-Rossi-Estrada, Marco
  • Vallés-Morán, F. J.|||0000-0001-6335-1746
  • UPV|||0000-0001-9989-8057
  • García-Bartual, Rafael|||0000-0002-1811-8264
[EN] The present research seeks contributing to the hydraulic jump free surface longitudinal profile characterization in stilling basins. To do so, a typified stilling basin from the United States Bureau of Reclamation (USBR II) physical model was developed, in order to measure the free surface of a hydraulic jump with Froude and Reynolds number values of Fr1=9 and Re1=14.7 104, using LIDAR (LIght Detection And Ranging) techniques. Along with the jump profile, a series of related parameters with relevance in the performance of the basin were also obtained. The results and its comparison with bibliographic data and expressions showed that the employed techniques are able to achieve a proper characterization of the hydraulic jump free surface, which points out to the potential of the instrumentation. The results also support the performance of the analyzed basin and its utility to reduce de hydraulic jump dimensions and still ensure the energy dissipation capacity., [ES] El presente estudio busca contribuir a la caracterización del perfil longitudinal de la lámina libre en resaltos hidráulicos que tienen lugar en un cuenco amortiguador. Para ello, se desarrolla un modelo físico de cuenco amortiguador tipificado del United States Bureau of Reclamation (USBR II), sobre el cual se mide la superficie libre de un resalto con números de Froude y Reynolds Fr1=9 y Re1=14.7·104, empleando técnicas LIDAR (LIght Detection And Ranging). Junto con el perfil de la lámina libre se obtienen una serie de parámetros relacionados con el mismo y de relevancia para el funcionamiento del cuenco amortiguador. Los resultados obtenidos y su comparación con datos y expresiones procedentes de la bibliografía muestran que las técnicas empleadas son capaces de caracterizar de forma adecuada la superficie libre del resalto, lo cual resulta indicativo del potencial de esta novedosa instrumentación. Los resultados también apuntan a la capacidad del cuenco analizado para reducir las dimensiones del resalto manteniendo su capacidad disipadora de energía., La presente investigación fue financiada por las becas predoctorales de la Generalitat Valenciana ([2015/7521]), en colaboración con el Fondo Social Europeo y el proyecto de investigación: ‘La aireación del flujo y su implementación en prototipo para la mejora de la disipación de energía de la lámina vertiente por resalto hidráulico en distintos tipos de presas’ (BIA2017-85412-C2-1-R), financiado por el Ministerio de Economía y Competitividad.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Experimental Characterization of the Hydraulic Jump Profile and Velocity Distribution in a Stilling Basin Physical Model

  • Macián Pérez, Juan Francisco
  • Vallés-Morán, F. J.|||0000-0001-6335-1746
  • UPV|||0000-0001-9989-8057
  • de Rossi-Estrada, Marco
  • García-Bartual, Rafael|||0000-0002-1811-8264
[EN] The study of the hydraulic jump developed in stilling basins is complex to a high degree due to the intense velocity and pressure fluctuations and the significant air entrainment. It is this complexity, bound to the practical interest in stilling basins for energy dissipation purposes, which brings the importance of physical modeling into the spotlight. However, despite the importance of stilling basins in engineering, bibliographic studies have traditionally focused on the classical hydraulic jump. Therefore, the objective of this research was to study the characteristics of the hydraulic jump in a typified USBR II stilling basin, through a physical model. The free surface profile and the velocity distribution of the hydraulic jump developed within this structure were analyzed in the model. To this end, an experimental campaign was carried out, assessing the performance of both, innovative techniques such as the time-of-flight camera and traditional instrumentation like the Pitot tube. The results showed a satisfactory representation of the free surface profile and the velocity distribution, despite some discussed limitations. Furthermore, the instrumentation employed revealed the important influence of the energy dissipation devices on the flow properties. In particular, relevant di erences were found for the hydraulic jump shape and the maximum velocity positions within the measured vertical profiles, when compared to classical hydraulic jumps., This research was funded by 'Generalitat Valenciana predoctoral grants (Grant number [2015/7521])', in collaboration with the European Social Funds and by the research project: 'La aireacion del flujo y su implementacion en prototipo para la mejora de la disipacion de energia de la lamina vertiente por resalto hidraulico en distintos tipos de presas' (BIA2017-85412-C2-1-R), funded by the Spanish Ministry of Economy.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Analysis of the Flow in a Typified USBR II Stilling Basin through a Numerical and Physical Modeling Approach

  • Macián Pérez, Juan Francisco
  • Huber, Boris
  • García-Bartual, Rafael|||0000-0002-1811-8264
  • Bayón, Arnau|||0000-0001-5007-0208
  • Vallés-Morán, F. J.|||0000-0001-6335-1746
[EN] Adaptation of stilling basins to higher discharges than those considered for their design implies deep knowledge of the flow developed in these structures. To this end, the hydraulic jump occurring in a typified United States Bureau of Reclamation Type II (USBR II) stilling basin was analyzed using a numerical and experimental modeling approach. A reduced-scale physical model to conduct an experimental campaign was built and a numerical computational fluid dynamics (CFD) model was prepared to carry out the corresponding simulations. Both models were able to successfully reproduce the case study in terms of hydraulic jump shape, velocity profiles, and pressure distributions. The analysis revealed not only similarities to the flow in classical hydraulic jumps but also the influence of the energy dissipation devices existing in the stilling basin, all in good agreement with bibliographical information, despite some slight differences. Furthermore, the void fraction distribution was analyzed, showing satisfactory performance of the physical model, although the numerical approach presented some limitations to adequately represent the flow aeration mechanisms, which are discussed herein. Overall, the presented modeling approach can be considered as a useful tool to address the analysis of free surface flows occurring in stilling basins., This research was funded by 'Generalitat Valenciana predoctoral grants (Grant number [2015/7521])', in collaboration with the European Social Funds and by the research project: 'La aireacion del flujo y su implementacion en prototipo para la mejora de la disipacion de energia de la lamina vertiente por resalto hidraulico en distintos tipos de presas' (BIA2017-85412-C2-1-R), funded by the Spanish Ministry of Economy.