Pasar al contenido principal

LA AIREACION DEL FLUJO Y SU IMPLEMENTACION EN PROTOTIPO PARA LA MEJORA DE LA DISIPACION DE ENERGIA DE LA LAMINA VERTIENTE POR RESALTO HIDRAULICO EN DISTINTOS TIPOS DE PRESAS

BIA2017-85412-C2-1-R

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2017
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Characterization of Structural Properties in High Reynolds Hydraulic Jump Based on CFD and Physical Modeling Approaches

  • Macián Pérez, Juan Francisco
  • Bayón, Arnau|||0000-0001-5007-0208
  • García-Bartual, Rafael|||0000-0002-1811-8264
  • López Jiménez, Petra Amparo|||0000-0002-7043-3683
  • Vallés-Morán, F. J.|||0000-0001-6335-1746
[EN] A classical hydraulic jump with Froude number (Fr1=6) and Reynolds number (Re1=210,000) was characterized using the computational fluid dynamics (CFD) codes OpenFOAM and FLOW-3D, whose performance was assessed. The results were compared with experimental data from a physical model designed for this purpose. The most relevant hydraulic jump characteristics were investigated, including hydraulic jump efficiency, roller length, free surface profile, distributions of velocity and pressure, and fluctuating variables. The model outcome was also compared with previous results from the literature. Both CFD codes were found to represent with high accuracy the hydraulic jump surface profile, roller length, efficiency, and sequent depths ratio, consistently with previous research. Some significant differences were found between both CFD codes regarding velocity distributions and pressure fluctuations, although in general the results agree well with experimental and bibliographical observations. This finding makes models with these characteristics suitable for engineering applications involving the design and optimization of energy dissipation devices., The research presented herein was possible thanks to the Generalitat Valenciana predoctoral grants [Ref. (2015/7521)], in collaboration with the European Social Funds and to the research project La aireacion del flujo y su implementacion en prototipo para la mejora de la disipacion de energia de la lamina vertiente por resalto hidraulico en distintos tipos de presas (BIA2017-85412-C2-1-R), funded by the Spanish Ministry of Economy.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Numerical modeling of hydraulic jumps at negative steps to improve energy dissipation in stilling basins

  • Macián-Pérez, Juan Francisco
  • García-Bartual, Rafael|||0000-0002-1811-8264
  • López Jiménez, Petra Amparo|||0000-0002-7043-3683
  • Vallés-Morán, F. J.|||0000-0001-6335-1746
[EN] The performance of stilling basins including a negative step was analyzed addressing its effect on the energy dissipation efficiency, dimensions and structural properties of the hydraulic jump, streambed pressures and pressure fluctuations. Six different cases were simulated, considering two possible relative heights for the step and three possible Froude numbers. The results show that the step yields to lower subcritical depths, allowing smaller basin dimensions. Nevertheless, it tends to slightly increase the roller length of the jump. Concerning the relative energy dissipation, results confirm the improvement derived from the step presence. The internal flow occurring in the jump was also analyzed, and more specifically the subzones generated upstream and downstream the impingement point. The results prove the contribution of the negative step in the stabilization of hydraulic jumps in the stilling basin. In particular, a general decrease of the streambed pressure is observed. In addition, pressure fluctuations are significantly reduced due to the negative step size influence on the hydraulic jump. Furthermore, the effectiveness of the computational fluid dynamics (CFD) techniques to simulate stilling basin flows and to adequately characterize the hydraulic jump performance was confirmed, The work was supported by the research project: 'La aireacion del flujo y su implementacion en prototipo para la mejora de la disipacion de energia de la lamina vertiente por resalto hidraulico en distintos tipos de presas' (BIA2017-85412-C2-1-R), funded by the Spanish Agencia Estatal de Investigacion and FEDER.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Assessment of the Performance of a Modified USBR Type II Stilling Basin by a Validated CFD Model

  • Macián-Pérez, Juan Francisco
  • Vallés-Morán, F. J.|||0000-0001-6335-1746
  • García-Bartual, Rafael|||0000-0002-1811-8264
[EN] The adaptation of existing dams is of paramount importance to face the challenge posed by climate change and new legal frameworks. Thus, it is crucial to optimize the design of stilling basins to reduce the hydraulic jump dimensions without jeopardizing the energy dissipation in the structure. A numerical model was developed to simulate a US Bureau of Reclamation Type II basin. The model was validated with a specifically designed physical model and then was used to simulate and test the performance of the basin after adding a second row of chute blocks. The results showed a reduction in the hydraulic jump dimensions in terms of the sequent depth ratio and the roller length, which were respectively 2.5% and 1.4% lower in the modified design. These results would allow an estimated increase of the discharge in the basin close to 10%. Furthermore, this new design had 1.2% higher efficiency. Consequently, the modifications proposed for the basin design suggest improved performance of the structure. The issue of the hydraulic jump length estimation also was discussed, and different approaches were introduced and compared. These methods follow a structured and systematic procedure and gave consistent results for the developed models., The authors acknowledge the collaboration of the Hydraulics Laboratory of the Department of Hydraulic Engineering and Environment from Universitat Politecnica de Valencia (UPV) and their technicians Juan Carlos Edo and Joaquin Oliver in the construction of the experimental device used for the numerical model setup and validation. The work was supported by the research project "La aireacion del flujo y su implementacion en prototipo para la mejora de la disipacion de energia de la lamina vertiente por resalto hidraulico en distintos tipos de presas" (BIA2017-85412-C2-1-R), funded by the Spanish Agencia Estatal de Investigacion and FEDER.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Diseño de jetbox para transición de flujo a presión a lámina libre con técnicas CFD, Design of jetbox for transition from pressurized flow to free surface using CFD modeling

  • Bayón, Arnau|||0000-0001-5007-0208
  • Vallés-Morán, F. J.|||0000-0001-6335-1746
[EN] The hydraulic analysis of dam stilling basins requires employing experimental models. Given that building a scaled spillway respecting similarity laws is not always possible, it is common practice to supply the device using a pressurized facility thanks to a jetbox or nozzle that makes the pressurized flow become free surface. Little attention is paid to this crucial device design, so this work proposes its design using a threedimensional CFD model with RANS RNG k-¿ for turbulence modeling. The minimum values of certain dimensions, such as stretch lengths or expansion/contraction coefficients, to avoid introducing excessive bias in the future experimental model are computed and the consequences of these parameters on results are reported and discussed., [ES] El análisis hidráulico de los cuencos de amortiguación de presas requiere el empleo de modelos experimentales. Dado que no siempre es posible construir un aliviadero a escala respetando las leyes de semejanza, es habitual alimentar el dispositivo mediante una instalación a presión gracias a un jetbox o tobera que haga pasar el flujo a presión a lámina libre. Poca atención se presta al diseño de este dispositivo crucial, por lo que el presente trabajo plantea su diseño mediante un modelo CFD tridimensional con modelo RANS RNG k-¿ para el tratamiento de la turbulencia. Los valores mínimos de determinadas dimensiones, como las longitudes de cada tramo o los coeficientes de expansión o contracción, para no introducir excesivo sesgo en el futuro modelo experimental son calculados y las repercusiones de estos parámetros en los resultados representados y analizados., Este trabajo ha sido desarrollado en el contexto del proyecto “LA AIREACION DEL FLUJO Y SU IMPLEMENTACION EN PROTOTIPO PARA LA MEJORA DE LA DISIPACION DE ENERGIA DE LA LAMINA VERTIENTE POR RESALTO HIDRAULICO EN DISTINTOS TIPOS DE PRESAS” (BIA2017-85412-C2-1R-AR), financiado por la Agencia Estatal de Investigación (España).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Numerical and physical modelling approaches to the study of the hydraulic jump and its application in large-dam stilling basins

  • Macián Pérez, Juan Francisco
[ES] El resalto hidráulico constituye uno de los fenómenos más complejos con aplicación en el campo de la ingeniería hidráulica. Por un lado, las propias características del resalto, entre las que se encuentran las grandes fluctuaciones turbulentas, la intensa entrada de aire y una disipación de energía muy significativa, contribuyen a su complejidad situando el conocimiento actual del fenómeno lejos de una comprensión total del mismo. Por otro lado, es precisamente la naturaleza disipadora de energía del resalto la que da lugar a su principal aplicación práctica. Así pues, la investigación que aquí se presenta trata de contribuir al conocimiento general del resalto hidráulico y su aplicación para disipar energía en cuencos amortiguadores de grandes presas. Para ello, se abordaron las bases del fenómeno mediante la caracterización de un resalto hidráulico clásico (RHC). La investigación se llevó a cabo bajo una doble perspectiva de modelación numérica y física. Se emplearon técnicas de Dinámica de Fluidos Computacional (DFC) para la realización de simulaciones de este resalto hidráulico, a la vez que se llevó a cabo una campaña experimental en un modelo físico específicamente diseñado para tratar el caso. De este modo, se abordaron los aspectos más relevantes del resalto hidráulico, incluyendo el ratio de calados conjugados, la eficiencia del resalto, la longitud de la zona de recirculación, el perfil de la lámina libre, las distribuciones de velocidad y presión, la longitud del resalto y el análisis de frecuencias. Los resultados de los modelos físico y numérico fueron comparados, no solo entre ellos, sino también con información de otros autores procedente de una extensa revisión bibliográfica. Ambos modelos mostraron su capacidad para representar con precisión el fenómeno estudiado. En base a este análisis se observa que la metodología empleada resulta adecuada para la investigación del fenómeno a estudiar. Una vez llevada a cabo la caracterización del RHC, se procedió a analizar un cuenco amortiguador para disipación de energía. En particular, se estudió un caso general y representativo de cuenco amortiguador tipificado USBR II, a partir de la doble perspectiva de modelación física y numérica. Asimismo, los resultados se compararon con datos y expresiones bibliográficas. Esta comparación pretendía evaluar los rasgos particulares del resalto hidráulico en cuencos amortiguadores de grandes presas, así como la influencia de los elementos disipadores de energía en el flujo. Todos los resultados mostraron estar en la línea de las investigaciones de otros autores, más allá de ciertas diferencias relativamente pequeñas. En consecuencia, la metodología desarrollada muestra su utilidad para abordar el estudio del flujo en cuencos amortiguadores. En concreto, los resultados presentados contribuyen a expandir el conocimiento sobre el RHC y el flujo en un cuenco amortiguador tipificado USBR II. Así pues, los resultados pueden emplearse para mejorar el diseño de estructuras de disipación de energía en grandes presas. Durante los últimos años, la adaptación de cuencos amortiguadores a caudales superiores a los empleados para su diseño ha ganado gran relevancia. Esta adaptación resulta clave por los efectos del cambio climáticos y las crecientes exigencias de la sociedad en materia de seguridad y protección frente a avenidas. De este modo, toda contribución a la modelación de resaltos hidráulicos, como la que aquí se presenta, resulta crucial para afrontar el reto de la adaptación de las estructuras hidráulicas para disipación de energía., [EN] The hydraulic jump constitutes one of the most complex phenomena with application in hydraulic engineering. On the one hand, a series of features bound to the hydraulic jump nature, such as the large turbulent fluctuations, the intense air entrainment and the significant energy dissipation, contribute to build its complexity, which places the current knowledge far from a full understanding of the phenomenon. On the other hand, it is precisely this energy dissipating nature that justifies its use in large-dam stilling basins, which constitutes its main practical application. Hence, the research here presented aimed to contribute to the general knowledge of the hydraulic jump phenomenon and its application for energy dissipation purposes in large-dam stilling basins. To this end, the bases of the phenomenon were addressed by characterising a classical hydraulic jump (CHJ). The research was conducted under a double numerical and physical modelling approach. Computational Fluid Dynamics (CFD) techniques were employed to simulate the hydraulic jump, whereas an experimental campaign in a physical model designed for the purpose was carried out too. The most relevant hydraulic jump characteristics were investigated, including sequent depths ratio, hydraulic jump efficiency, roller length, free surface profile, distributions of velocity and pressure, hydraulic jump length and fluctuating variables. The results from the physical and the numerical models were compared not only between them, but also with bibliographic information coming from an extensive literature review. It was found that both modelling approaches were able to accurately represent the phenomenon under study. Once the characterisation of the CHJ was carried out, the analysis of an energy dissipation stilling basin was developed. In particular, a general and representative case study consisting in a typified USBR II stilling basin was analysed through a physical and numerical modelling approach. In addition, the modelled results were compared with data and expressions coming from a bibliographic review. This comparison was intended to assess the particular characteristics of the hydraulic jump in a large-dam stilling basin, as well as the affection of the energy dissipation devices to the flow. The results revealed not only similarities to the CHJ, but also the influence of the energy dissipation devices existing in the stilling basin, all in good agreement with bibliographic information, despite some slight differences. Consequently, the presented modelling approach showed to be a useful tool to address free surface flows occurring in stilling basins. In particular, the results reported contribute to the enhancement of the knowledge concerning the CHJ and the flow in a typified USBR II stilling basin. These results can be used to improve the design of large-dam energy dissipation structures. This is a key issue in hydraulic engineering, especially in the recent years. Thus, there is an increasing urgency for the adaptation of existing stilling basins, which must cope with higher discharges than those considered in their original design. The adaptation of these structures becomes even more important due to climate change effects and increasing society demands regarding security and flood protection. In these terms, contributions to hydraulic jump modelling, as the ones presented in this research, are crucial to face the challenge of energy dissipation structures adaptation., [CA] El ressalt hidràulic constitueix un dels fenòmens de major complexitat amb aplicació en el camp de l'enginyeria hidràulica. D'una banda, les característiques del propi ressalt, com poden ser les grans fluctuacions turbulentes, la intensa entrada d'aire i una dissipació d'energia molt significativa, contribueixen a la seua complexitat, de manera que el coneixement actual del ressalt està lluny d'una comprensió total del mateix. D'altra banda, és precisament la gran dissipació d'energia associada al ressalt la que motiva la seua principal aplicació pràctica. La investigació que ací es presenta tracta de contribuir al coneixement general del ressalt hidràulic i la seua aplicació per dissipar energia al vas esmorteïdor de grans preses. En primer lloc, s'abordaren les bases del fenomen mitjançant la caracterització d'un ressalt hidràulic clàssic (RHC). La investigació es va dur a terme sota una doble perspectiva de modelització física i numèrica. El ressalt hidràulic es va simular emprant tècniques de Dinàmica de Fluids Computacional (DFC), mentre paral·lelament es desenvolupava una campanya experimental amb un model físic específicament dissenyat per tractar aquest cas. D'aquesta manera, es van abordar els aspectes més rellevants del ressalt, incloent el ràtio de calats conjugats, l'eficiència, la llargària de la regió de recirculació, el perfil de la superfície lliure, les distribucions de velocitat i pressió, la llargària del ressalt i l'anàlisi de freqüències. Els resultats dels models físic i numèric es compararen, no solament entre ells, sinó també amb informació procedent d'una extensa revisió bibliogràfica. Ambdós models van mostrar la seua capacitat per reproduir amb precisió el fenomen estudiat. Prenent aquest anàlisi, s'observa que la metodologia desenvolupada resulta apropiada per investigar fenòmens com el ressalt hidràulic. Caracteritzat el RHC, s'analitzà un vas esmorteïdor amb funció dissipadora d'energia. Concretament, s'estudià un cas general i representatiu de vas esmorteïdor tipificat USBR II, partint de la doble perspectiva de modelització física i numèrica. Així mateix, els resultats es van comparar amb dades i expressions bibliogràfiques. Aquesta comparació pretenia avaluar les particularitats del ressalt hidràulic al vas esmorteïdor de grans preses, així com la influència al flux dels elements dissipadors d'energia. D'aquesta manera, els resultats es situaren en la línia d'investigacions d'altes autors, més enllà de les lleugeres diferències reportades. En conseqüència, la metodologia desenvolupada mostra la seua utilitat per abordar l'estudi del flux en estructures de dissipació d'energia. En particular, els resultats contribueixen a expandir el coneixement relatiu al RHC i al flux en un vas esmorteïdor tipificat USBR II. Així, aquests resultats poden ser utilitzats per millorar el disseny de les estructures de dissipació d'energia de grans preses. Durant els últims anys, l'adaptació de vasos esmorteïdors a cabals superiors als considerats en la seua fase de disseny ha guanyat especial rellevància. Aquesta adaptació resulta crucial pels efectes del canvi climàtic i les creixents demandes de la societat en matèria de seguretat i protecció front a inundacions. En definitiva, tota contribució a la modelització de ressalts hidràulics, com la que ací es presenta, és de gran importància per afrontar el repte de l'adaptació d'estructures hidràuliques dissipadores d'energia., The research here presented was funded by ‘Generalitat Valenciana predoctoral grants (Grant number [2015/7521])’, in collaboration with the European Social Funds and by the research project ‘La aireación del flujo y su implementación en prototipo para la mejora de la disipación de energía de la lámina vertiente por resalto hidráulico en distintos tipos de presas’ (BIA2017-85412-C2-1-R), funded by the Spanish Ministry of Economy in cooperation with European FEDER funds.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Estudio de la superficie libre de resaltos hidráulicos en cuencos amortiguadores empleando técnicas LIDAR, Hydraulic jump free surface study in stilling basins employing LIDAR techniques

  • Macián-Pérez, Juan Francisco
  • De-Rossi-Estrada, Marco
  • Vallés-Morán, F. J.|||0000-0001-6335-1746
  • UPV|||0000-0001-9989-8057
  • García-Bartual, Rafael|||0000-0002-1811-8264
[EN] The present research seeks contributing to the hydraulic jump free surface longitudinal profile characterization in stilling basins. To do so, a typified stilling basin from the United States Bureau of Reclamation (USBR II) physical model was developed, in order to measure the free surface of a hydraulic jump with Froude and Reynolds number values of Fr1=9 and Re1=14.7 104, using LIDAR (LIght Detection And Ranging) techniques. Along with the jump profile, a series of related parameters with relevance in the performance of the basin were also obtained. The results and its comparison with bibliographic data and expressions showed that the employed techniques are able to achieve a proper characterization of the hydraulic jump free surface, which points out to the potential of the instrumentation. The results also support the performance of the analyzed basin and its utility to reduce de hydraulic jump dimensions and still ensure the energy dissipation capacity., [ES] El presente estudio busca contribuir a la caracterización del perfil longitudinal de la lámina libre en resaltos hidráulicos que tienen lugar en un cuenco amortiguador. Para ello, se desarrolla un modelo físico de cuenco amortiguador tipificado del United States Bureau of Reclamation (USBR II), sobre el cual se mide la superficie libre de un resalto con números de Froude y Reynolds Fr1=9 y Re1=14.7·104, empleando técnicas LIDAR (LIght Detection And Ranging). Junto con el perfil de la lámina libre se obtienen una serie de parámetros relacionados con el mismo y de relevancia para el funcionamiento del cuenco amortiguador. Los resultados obtenidos y su comparación con datos y expresiones procedentes de la bibliografía muestran que las técnicas empleadas son capaces de caracterizar de forma adecuada la superficie libre del resalto, lo cual resulta indicativo del potencial de esta novedosa instrumentación. Los resultados también apuntan a la capacidad del cuenco analizado para reducir las dimensiones del resalto manteniendo su capacidad disipadora de energía., La presente investigación fue financiada por las becas predoctorales de la Generalitat Valenciana ([2015/7521]), en colaboración con el Fondo Social Europeo y el proyecto de investigación: ‘La aireación del flujo y su implementación en prototipo para la mejora de la disipación de energía de la lámina vertiente por resalto hidráulico en distintos tipos de presas’ (BIA2017-85412-C2-1-R), financiado por el Ministerio de Economía y Competitividad.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Experimental Characterization of the Hydraulic Jump Profile and Velocity Distribution in a Stilling Basin Physical Model

  • Macián Pérez, Juan Francisco
  • Vallés-Morán, F. J.|||0000-0001-6335-1746
  • UPV|||0000-0001-9989-8057
  • de Rossi-Estrada, Marco
  • García-Bartual, Rafael|||0000-0002-1811-8264
[EN] The study of the hydraulic jump developed in stilling basins is complex to a high degree due to the intense velocity and pressure fluctuations and the significant air entrainment. It is this complexity, bound to the practical interest in stilling basins for energy dissipation purposes, which brings the importance of physical modeling into the spotlight. However, despite the importance of stilling basins in engineering, bibliographic studies have traditionally focused on the classical hydraulic jump. Therefore, the objective of this research was to study the characteristics of the hydraulic jump in a typified USBR II stilling basin, through a physical model. The free surface profile and the velocity distribution of the hydraulic jump developed within this structure were analyzed in the model. To this end, an experimental campaign was carried out, assessing the performance of both, innovative techniques such as the time-of-flight camera and traditional instrumentation like the Pitot tube. The results showed a satisfactory representation of the free surface profile and the velocity distribution, despite some discussed limitations. Furthermore, the instrumentation employed revealed the important influence of the energy dissipation devices on the flow properties. In particular, relevant di erences were found for the hydraulic jump shape and the maximum velocity positions within the measured vertical profiles, when compared to classical hydraulic jumps., This research was funded by 'Generalitat Valenciana predoctoral grants (Grant number [2015/7521])', in collaboration with the European Social Funds and by the research project: 'La aireacion del flujo y su implementacion en prototipo para la mejora de la disipacion de energia de la lamina vertiente por resalto hidraulico en distintos tipos de presas' (BIA2017-85412-C2-1-R), funded by the Spanish Ministry of Economy.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Analysis of the Flow in a Typified USBR II Stilling Basin through a Numerical and Physical Modeling Approach

  • Macián Pérez, Juan Francisco
  • Huber, Boris
  • García-Bartual, Rafael|||0000-0002-1811-8264
  • Bayón, Arnau|||0000-0001-5007-0208
  • Vallés-Morán, F. J.|||0000-0001-6335-1746
[EN] Adaptation of stilling basins to higher discharges than those considered for their design implies deep knowledge of the flow developed in these structures. To this end, the hydraulic jump occurring in a typified United States Bureau of Reclamation Type II (USBR II) stilling basin was analyzed using a numerical and experimental modeling approach. A reduced-scale physical model to conduct an experimental campaign was built and a numerical computational fluid dynamics (CFD) model was prepared to carry out the corresponding simulations. Both models were able to successfully reproduce the case study in terms of hydraulic jump shape, velocity profiles, and pressure distributions. The analysis revealed not only similarities to the flow in classical hydraulic jumps but also the influence of the energy dissipation devices existing in the stilling basin, all in good agreement with bibliographical information, despite some slight differences. Furthermore, the void fraction distribution was analyzed, showing satisfactory performance of the physical model, although the numerical approach presented some limitations to adequately represent the flow aeration mechanisms, which are discussed herein. Overall, the presented modeling approach can be considered as a useful tool to address the analysis of free surface flows occurring in stilling basins., This research was funded by 'Generalitat Valenciana predoctoral grants (Grant number [2015/7521])', in collaboration with the European Social Funds and by the research project: 'La aireacion del flujo y su implementacion en prototipo para la mejora de la disipacion de energia de la lamina vertiente por resalto hidraulico en distintos tipos de presas' (BIA2017-85412-C2-1-R), funded by the Spanish Ministry of Economy.