Pasar al contenido principal

EL USO DE LA AIREACION FORZADA DEL FLUJO EN RAPIDAS COMO EXTENSION DEL CAMPO DE UTILIZACION DE LAS OBRAS DE DISIPACION DE ENERGIA A PIE DE PRESA MEDIANTE RESALTO HIDRAULICO

BIA2011-28756-C03-01

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación Fundamental no Orientada
Convocatoria Proyectos I+D
Año convocatoria 2011
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Subdirección General de Proyectos de Investigación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA
Identificador persistente http://dx.doi.org/10.13039/501100004837

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Diseño de jetbox para transición de flujo a presión a lámina libre con técnicas CFD, Design of jetbox for transition from pressurized flow to free surface using CFD modeling

  • Bayón, Arnau|||0000-0001-5007-0208
  • Vallés-Morán, F. J.|||0000-0001-6335-1746
[EN] The hydraulic analysis of dam stilling basins requires employing experimental models. Given that building a scaled spillway respecting similarity laws is not always possible, it is common practice to supply the device using a pressurized facility thanks to a jetbox or nozzle that makes the pressurized flow become free surface. Little attention is paid to this crucial device design, so this work proposes its design using a threedimensional CFD model with RANS RNG k-¿ for turbulence modeling. The minimum values of certain dimensions, such as stretch lengths or expansion/contraction coefficients, to avoid introducing excessive bias in the future experimental model are computed and the consequences of these parameters on results are reported and discussed., [ES] El análisis hidráulico de los cuencos de amortiguación de presas requiere el empleo de modelos experimentales. Dado que no siempre es posible construir un aliviadero a escala respetando las leyes de semejanza, es habitual alimentar el dispositivo mediante una instalación a presión gracias a un jetbox o tobera que haga pasar el flujo a presión a lámina libre. Poca atención se presta al diseño de este dispositivo crucial, por lo que el presente trabajo plantea su diseño mediante un modelo CFD tridimensional con modelo RANS RNG k-¿ para el tratamiento de la turbulencia. Los valores mínimos de determinadas dimensiones, como las longitudes de cada tramo o los coeficientes de expansión o contracción, para no introducir excesivo sesgo en el futuro modelo experimental son calculados y las repercusiones de estos parámetros en los resultados representados y analizados., Este trabajo ha sido desarrollado en el contexto del proyecto “LA AIREACION DEL FLUJO Y SU IMPLEMENTACION EN PROTOTIPO PARA LA MEJORA DE LA DISIPACION DE ENERGIA DE LA LAMINA VERTIENTE POR RESALTO HIDRAULICO EN DISTINTOS TIPOS DE PRESAS” (BIA2017-85412-C2-1R-AR), financiado por la Agencia Estatal de Investigación (España).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Performance assessment of OpenFOAM and FLOW-3D in the numerical modeling of a low Reynolds number hydraulic jump

  • Bayón, Arnau|||0000-0001-5007-0208
  • García-Bartual, Rafael|||0000-0002-1811-8264
  • Vallés-Morán, F. J.|||0000-0001-6335-1746
  • López Jiménez, Petra Amparo|||0000-0002-7043-3683
  • Valero, Daniel
A comparative performance analysis of the CFD platforms OpenFOAM and FLOW-3D is presented, focusing on a 3D swirling turbulent flow: a steady hydraulic jump at low Reynolds number. Turbulence is treated using RANS approach RNG k-ε. A Volume Of Fluid (VOF) method is used to track the airewater interface, consequently aeration is modeled using an EulerianeEulerian approach. Structured meshes of cubic elements are used to discretize the channel geometry. The numerical model accuracy is assessed comparing representative hydraulic jump variables (sequent depth ratio, roller length, mean velocity profiles, velocity decay or free surface profile) to experimental data. The model results are also compared to previous studies to broaden the result validation. Both codes reproduced the phenomenon under study concurring with experimental data, although special care must be taken when swirling flows occur. Both models can be used to reproduce the hydraulic performance of energy dissipation structures at low Reynolds numbers., This research was supported by the VALi + D Scholarship Program (Generalitat Valenciana, Spain). We also greatly acknowledge financial support from the project BIA2011-28756-C03-01, "Natural and forced air entrainment in dam spillways and potential range of operation enlargement for hydraulic jump energy dissipators" (Spanish Ministry of Economy and Competitiveness) and from the ERDF European Union funding.