Pasar al contenido principal

COLAPSO PROGRESIVO Y ROBUSTEZ EN EDIFICIOS CON ESTRUCTURA PREFABRICADA DE HORMIGON

BIA2017-88322-R

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2017
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Dynamic punching assesment of edge columns after sudden corner column removal

  • Garzon-Roca, Julio
  • Sagaseta, Juan
  • Buitrago, Manuel|||0000-0002-5561-5104
  • Adam, Jose M|||0000-0002-9205-8458
[EN] A dynamic punching shear model is presented for general sudden column removal cases which was validated against data from a purpose-built full-scale two-storey reinforced concrete building subjected to a sudden corner column removal. Such analyses are generally performed in structural robustness or integrity design against progressive collapse and several simplifications are generally adopted to avoid complex dynamic nonlinear analyses. These simplifications are generally on the conservative side and punching can be predicted incorrectly. The test results presented showed that Vierendeel action at small deformations was predominant after column removal. The dynamic amplification of the deformations and shear was significant although punching did not occur as predicted by the model. It was found that in general cases punching around edge columns after sudden corner column removal was not critical using design accidental load combinations, although a dynamic punching check is still needed especially for higher live loads and low flexural and punching reinforcement ratios., This work is part of the project funded by the Engineering Physical Science Research Council (EPSRC) of the UK as part of an Impact Acceleration Account (IAA) hold at University of Surrey (EP/K008153/1), and a continuation of two research projects also funded by EPSRC (grant ref:EP/K503939 and EP/K008153/1). The authors would like to acknowledge collaborators at Skidmore, Owings and Merrill (Europe) LLP (D. Jajich and K. Micallef) and also express their gratitude to the Generalitat Valenciana/Fons Social Europeu [APOSTD/2019/101] for the funding received. The experiment was funded by a 2017 Leonardo Grant for Researchers and Cultural Creators from the BBVA Foundation
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Robustness of RC building structures with infill masonry walls: tests on a purpose-built structure

  • Buitrago, Manuel|||0000-0002-5561-5104
  • Calderón García, Pedro Antonio|||0000-0002-9783-9333
  • Adam, Jose M|||0000-0002-9205-8458
  • Bertolesi, Elisa
  • Juan Sagaseta
[EN] Structural robustness is a significant property towards improving resilience of buildings, i.e. enhance their ability to withstand and recover from extreme events which often can cause local damage and progressive collapse. It is widely accepted that robustness depends on the capacity of the structure to activate alternative load paths (ALPs) after the failure of load-bearing elements, e.g. columns. Early evidence during World War II showed that progressive collapse of some buildings was avoided by the presence of masonry infill walls. Subsequent studies focused on this effect for cases of sudden column removal although most of these studies were analytical, numerical and only looked at internal columns which are generally less vulnerable to accidental events compared to corner and edge columns. The aim of this study was to analyse how infill walls can improve the robustness of reinforced concrete (RC) buildings in corner columns failure scenarios. A purpose-built 3D two-storey full-scale RC building structure with infill masonry walls was tested. The contribution of masonry infill walls was analysed in terms of: i) load redistribution, ii) ALPs, and iii) Dynamic Amplification Factors (DAFs) to be applied in linear-static analyses. The test was highly monitored by 38 strain gauges, 38 LVDTs and 2 accelerometers to register the vertical and lateral response. The results showed that masonry infill walls had a significant influence on the structural response and activated the predominant ALPs at very small deflections., This work was carried out with the support of a 2017 Leonardo Grant for Researchers and Cultural Creators from the BBVA Foundation. The authors would also like to express their gratitude to the Levantina, Ingenieria y Construccion S.L. (LIC) company for funding the construction of the building, and to the Generalitat Valenciana/Fons Social Europeu [APOSTD/2019/101] and Universitat Politecnica de Valencia [PAID-10-17] for funding received under different postdoctoral programs.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A Parametric Computational Study of RC Building Structures under Corner-Column Removal Situations

  • Buitrago, Manuel|||0000-0002-5561-5104
  • Adam, Jose M|||0000-0002-9205-8458
  • Bertolesi, Elisa
  • Garzón-Roca, Julio
  • Sagaseta, Juan
[EN] Building progressive collapse is currently one of the hottest topics in the structural engineering field. Most of the research carried out to date on this topic has been focused on the structural analysis of the failure of one or more columns in a building to determine the Alternative Load Paths (ALPs) the structure can activate. Past research was mainly focused on extreme situations with high loads and large structural deformations and, to a lesser extent, research looked at lower loads used in design accidental situations, which requires a different set of assumptions in the analysis. This paper describes a study aimed at analysing accidental design situations in corner-column removal scenarios in reinforced concrete (RC) building structures and evaluating the available real ALPs in order to establish practical recommendations for design situations that could be taken into account in future design codes. A wide parametric computational analysis was carried out with advanced Finite Element (FE) models which the authors validated by full¿scale tests on a purpose¿built building structure. The findings allowed us to: (i) establish design recommendations, (ii) demonstrate the importance of Vierendeel action and (iii) recommend Dynamic Amplification Factors (DAFs) for design situations., This research was funded by Fundacion BBVA-Becas Leonardo a Investigadores y Creadores Culturales 2017; the Spanish Ministry of Economy, Industry and Competitiveness, grant number BIA2017-88322-R-AR; Generalitat Valenciana/Fons Social Europeu, grant number APOSTD/2019/101 and Universitat Politecnica de Valencia, grant number PAID-10-17. This work is also part of the project "Extension of theoretical models against progressive collapse for tall and supertall concrete buildings", funded by the Engineering Physical Science Research Council (EPSRC) of the UK as part of an Impact Acceleration Account (IAA) held at the University of Surrey (grant number EP/K008153/1), and a continuation of two research projects also funded by EPSRC of the UK (grant ref: EP/K503939 and grant ref: EP/K008153/1).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Robustness of a full-scale precast building structure subjected to corner-column failure

  • Buitrago, Manuel|||0000-0002-5561-5104
  • Makoond, Nirvan Chandra|||0000-0002-5203-6318
  • Moragues, Juan J|||0000-0001-8111-5480
  • Adam, Jose M|||0000-0002-9205-8458
  • Sagaseta, Juan
[EN] Although many analytical and experimental studies have been carried out to date on the progressive collapse and robustness of cast-in-place reinforced concrete (RC) and steel building structures, very few experimental research works have been performed on precast concrete (PC) structures. The small number of publications on these experiments have focused on analysing the behaviour of subassemblies after the sudden loss of an internal column. This paper is the first to describe the construction of a full-scale purpose-built experimental PC building to study the sudden removal of corner columns and the structure¿s ability to find alternative load paths (ALPs). The connections between the precast members were designed using existing simplified guidance for robustness. The results obtained from the test using gravity loads corresponding to typical load combinations defined in building codes for accidental design situations, showed a structural response governed by Vierendeel action with a clear contribution from the floor slabs. Load increase factors were obtained from the test results which can be applied by practitioners using simplified linear finite element models to account for non-linear dynamic effects in a simplified manner. This work is expected to form part of a large database of experimental results that are useful for developing advanced numerical simulations and parametric analyses., The authors wish to acknowledge the grant awarded for the PRE-BUST project (ref: BIA2017-88322-R-AR) funded by MCIN/AEI/10.13039/501100011033 and " ERDF A Way of Making Europe " . The authors would also like to express their gratitude for funding received under the postdoctoral programs of the Generalitat Valenciana/Fons Social Europeu [APOSTD/2019/101] and Grant IJC2020-042642-I funded by MCIN/AEI/10.13039/501100011033 and by the " European Union NextGenerationEU/PRTR " . We are also grateful for the invalu- able cooperation of the company Levantina, Ingeniena y Construccion S.L. (LIC) and the contribution of the members and collaborators of the Building Resilient research group (Pedro A. Calderon, Daniel Tasquer, Ghobad Shahnazi, Ana Sanchez, Lorenzo Marin, Giacomo Caredda, Diego F. Cetina, Maria L. Gerbaudo, Marina Oliver) . We would like to give special thanks to Eduardo J. Mezquida-Alcaraz for his work in preparing and carrying out the test.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Robustness of a full-scale precast building structure after edge column failure

  • Buitrago, Manuel|||0000-0002-5561-5104
  • Makoond, Nirvan Chandra|||0000-0002-5203-6318
  • Setiawan, Andri
  • Adam, Jose M|||0000-0002-9205-8458
  • Sagaseta, Juan
[EN] A full-scale purposely built precast concrete building, designed to comply with robustness requirements in current building codes, was subjected to two different scenarios of sudden edge-column removal under the accidental load combination established by the codes. The main aim of this study was to assess how the structural system can prevent collapse initiation after the removal of a single edge column at different locations. This building was later subjected to a larger initial failure with the aim of arresting collapse propagation as part of another piece of research and outside the scope of this specific study. The building was highly instrumented providing unique data at a building system level for the understanding of the development of alternative load paths after the column removals. This work is novel since existing tests of edge-column removal from precast systems correspond mostly to simplified beam-column-slab subassemblies where the interaction with the rest of the building is neglected. The results obtained from this work are particularly relevant towards understanding the role of tying systems used in precast concrete buildings under different accidental scenarios using typical load combinations defined in building codes. The structure was able to redistribute the loads after each column was removed due to a combination of Vierendeel and compressive arching and membrane actions, leading to very small deflections. The role of vertical, horizontal, and floor tying systems in providing continuity between prefabricated and hybrid members was analysed in view of the experimental results obtained. The response obtained differed significantly from design assumptions commonly adopted for tying systems that rely on tensile catenary action at large deflections. This research is timely considering the push to adopt prefabricated components in building construction driven by Net Zero targets while maximising robustness of buildings subjected to more extreme events exacerbated by climate change., The authors wish to acknowledge the funding received by Grant BIA2017-88322-R-AR funded by MCIN/AEI/10.13039/501100011033 and "ERDF A Way of Making Europe", and by a project (Endure) that has received funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation programme (Grant agreement No. 101000396) . The authors would also like to ex-press their gratitude for funding received under the postdoctoral programs of the Generalitat Valenciana/Fons Social Europeu [APOSTD/2019/101] and Grant IJC2020-042642-I funded by MCIN/AEI/10.13039/501100011033 and by the "European Union NextGener-ationEU/PRTR". We are also grateful for the invaluable cooperation of the company Levantina, Ingenieria y Construccion S.L. (LIC) and the contribution of the members and collaborators of the ICITECH research group.