Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publicación Artículo científico (JournalArticle)

From Classical to Advanced Use of Polymers in Food and Beverage Applications

  • Vallejos Calzada, Saúl
  • Trigo López, Miriam
  • Arnáiz Alonso, Ana
  • Miguel, Álvaro
  • Muñoz Santamaría, María Asunción
  • Mendía Jalón, Aránzazu
  • García Pérez, José Miguel
Polymers are extensively used in food and beverage packaging to shield against contaminants and external damage due to their barrier properties, protecting the goods inside and reducing waste. However, current trends in polymers for food, water, and beverage applications are moving forward into the design and preparation of advanced polymers, which can act as active packaging, bearing active ingredients in their formulation, or controlling the head-space composition to extend the shelf-life of the goods inside. In addition, polymers can serve as sensory polymers to detect and indicate the presence of target species, including contaminants of food quality indicators, or even to remove or separate target species for later quantification. Polymers are nowadays essential materials for both food safety and the extension of food shelf-life, which are key goals of the food industry, and the irruption of smart materials is opening new opportunities for going even further in these goals. This review describes the state of the art following the last 10 years of research within the field of food and beverage polymer’s applications, covering present applications, perspectives, and concerns related to waste generation and the circular economy., This work was supported by the Regional Government of Castilla y León (Junta de Castilla y León) and by the Ministry of Science and Innovation MICIN and the European Union NextGeneration EU PRTR. The project leading to these results has received funding from “La Caixa” Foundation, under the agreement LCF/PR/PR18/51130007. We also gratefully acknowledge the grant PID2020-113264RB-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”. Finally, we want to acknowledge the funding from Ministerio de UniversidadesEuropean Union in the frame of NextGenerationEU RD 289/2021 (Universidad Politécnica de Madrid and Universidad Autónoma de Madrid-CA1/RSUE/2021-00409).
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publicación Artículo científico (JournalArticle)

Boosting m-aramids performance with p-oriented aromatic amide side chains

  • Miguel Ortega, Alvaro
  • Vallejos Calzada, Saúl
  • García Pérez, José Miguel
  • Trigo López, Miriam
This study aimed to enhance the mechanical properties of m-aramids by incorporating varying percentages of p-aramid side chains through copolymerization while ensuring solubility for practical applications. The mechanical performance of the resulting copolymers was compared with the commercial m-aramid, MPIA (poly(m-phenylene terephthalamide)). Notably, even with a 20% incorporation of p-aramid side chains, there was a substantial increase of 48% in Young’s modulus and 7% in tensile strength compared to MPIA. Additionally, the nitro group capping the p-aramid side chains demonstrated significant efficacy in enhancing the mechanical performance of the materials upon exposure to hydrogen. Specifically, there was an increase of more than 11% in Young’s modulus upon initial contact with hydrogen. This finding suggests potential applications in protective coatings for stainless steel used in high-pressure hydrogen storage environments. In such applications, exposure to hydrogen can accelerate embrittlement and limit operational lifespan, and coating with these materials can mitigate embrittlement and improve operational lifespan., This work was supported by the Regional Government of Castilla y León (Junta de Castilla y León), the Ministry of Science and Innovation MICIN and the European Union NextGenerationEU/PRTR, and the Spanish Agencia Estatal de Investigación (State Research Agency). Author M. Trigo-López received grant PID2019-108583RJ-I00 funded by MCIN/AEI/ 10.13039/501100011033. Álvaro Miguel-Ortega received funding from Ministerio de Universidades-European Union in the frame of NextGenerationEU RD 289/2021 (CA1/RSUE/2021-00409) by the Universidad Autónoma de Madrid.
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publicación Artículo científico (JournalArticle)

Improving the adhesion of satin XPS to sandstone with customized polyurethane adhesives for sustainable facade cladding and thermal insulation

  • Miguel Ortega, Alvaro
  • González Moreno, Sara
  • González Martín, José Manuel
  • Arroyo Sanz, Raquel
  • García García, Félix Clemente
  • Trigo López, Miriam
  • Vallejos Calzada, Saúl
Six PU adhesives were synthesised with two different polyols (PPG and PEG based) of three molecular weights, namely 400, 1000 and 2000 g mol−1, and MDI, to prepare sandstone-XPS isolating façade panels. The chemical structure, thermal properties, and adhesion properties in the preparation of the panels were evaluated. Both sandstone and XPS are commonly used materials in construction due to their excellent insulating properties, durability, flexibility, water resistance, and aesthetic appeal, making them environmentally attractive. The industry trend is towards using sanded XPS in these panels, as better adhesion is achieved with typical adhesives compared to satin or unsanded XPS. However, this entails waste generation from sanding, a higher panel price and a difference in adhesive consumption from 309 g m−2 to 684 g m−2 for unsanded (or satin) and sanded XPS, respectively. In this study, all prepared panels exhibit good adhesion properties, even those made with satin XPS. Panels prepared from PPG-based adhesives show better adhesion performance than those made from PEG, reaching 0.52 ± 0.07 N mm−2 with the 1000 g mol−1 PPG polyol-based adhesive. These highest adhesion properties are due to the optimal balance of flexible and rigid segments in the polymer material structure. The adhesive maintains its high performance even after harsh temperature and humidity conditions. After accelerated ageing with heat, cold and water, the probes retain between 65 and 71 % of the original tensile strength (0.34 ± 0.03, 0.35 ± 0.07 and 0.37 ± 0.01 N mm−2, respectively). This finding suggests an interesting starting point for cost savings associated with sanding and reduction in XPS waste generation, making them economically and environmentally appealing., We gratefully acknowledge the financial support provided by all funders. This work was supported by the Regional Government of Castilla y León (Junta de Castilla y León) and by the Ministry of Science and Innovation MICIN and the European Union NextGenerationEU PRTR. Author Saul Vallejos received grant BG22/00086 funded by the Spanish Ministerio de Universidades. Author Álvaro Miguel's work was facilitated by the Margarita Salas grant ( CA1/RSUE/2021–00409 ), funded by the Universidad Autónoma de Madrid. The financial support provided by Fondo Europeo de Desarrollo Regional-European Regional Development Fund (FEDER, ERDF) and Regional Government of Castilla y León -Consejería de Educación, Junta de Castilla y León- ( BU025P23 ) is gratefully acknowledged. We also acknowledge the funding provided by Grant PID2020-113264RB-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”.