Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publicación Artículo científico (JournalArticle)

From Classical to Advanced Use of Polymers in Food and Beverage Applications

  • Vallejos Calzada, Saúl
  • Trigo López, Miriam
  • Arnáiz Alonso, Ana
  • Miguel, Álvaro
  • Muñoz Santamaría, María Asunción
  • Mendía Jalón, Aránzazu
  • García Pérez, José Miguel
Polymers are extensively used in food and beverage packaging to shield against contaminants and external damage due to their barrier properties, protecting the goods inside and reducing waste. However, current trends in polymers for food, water, and beverage applications are moving forward into the design and preparation of advanced polymers, which can act as active packaging, bearing active ingredients in their formulation, or controlling the head-space composition to extend the shelf-life of the goods inside. In addition, polymers can serve as sensory polymers to detect and indicate the presence of target species, including contaminants of food quality indicators, or even to remove or separate target species for later quantification. Polymers are nowadays essential materials for both food safety and the extension of food shelf-life, which are key goals of the food industry, and the irruption of smart materials is opening new opportunities for going even further in these goals. This review describes the state of the art following the last 10 years of research within the field of food and beverage polymer’s applications, covering present applications, perspectives, and concerns related to waste generation and the circular economy., This work was supported by the Regional Government of Castilla y León (Junta de Castilla y León) and by the Ministry of Science and Innovation MICIN and the European Union NextGeneration EU PRTR. The project leading to these results has received funding from “La Caixa” Foundation, under the agreement LCF/PR/PR18/51130007. We also gratefully acknowledge the grant PID2020-113264RB-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”. Finally, we want to acknowledge the funding from Ministerio de UniversidadesEuropean Union in the frame of NextGenerationEU RD 289/2021 (Universidad Politécnica de Madrid and Universidad Autónoma de Madrid-CA1/RSUE/2021-00409).
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publicación Capítulo o parte de un libro (BookPart)

Smart Polymers for Food and Water Quality Control and Safety

  • Vallejos Calzada, Saúl
  • Trigo López, Miriam
  • Arnáiz Alonso, Ana
  • Miguel, Álvaro
  • García Pérez, José Miguel
A large number of annual cases of diseases and deaths related to spoiled or contaminated food, and the amount of food waste are a matter of socio-economic impact, highlighting the need for a fast, easy, cheap, available, and real-time determination of food quality and safety. To ensure this, physical and chemical food quality indicators such as humidity, temperature, gases, pH, microorganisms, pesticides, etc., should be controlled and monitored during production, transportation, storage, and consumption. In this sense, smart polymers are raised as useful tools to facilitate this task. These polymers are sensitive to variations in the microenvironment, modifying their properties and/or generating a response that can be measured. Due to their versatility, these materials can be part of the food packaging to inform the consumers or be used as a measuring tool to determine the state of the food. This chapter envisaged the concept of smart polymers, the types, and their main applications for determining food quality and ensuring food and beverage safety., We gratefully acknowledge the financial support provided by FEDER (Fondo Europeo de Desarrollo Regional), the Spanish AEI (State Research Agency, PID2020-113264RBI00/AEI/10.13039/501100011033 and PID2019-108583RJI00/AEI/10.13039/501100011033), and "La Caixa" Foundation (under agreement LCF/PR/PR18/51130007). We also acknowledge the financial support provided by the Spanish Ministerio de Universidades (Plan de Recuperación, Transformación y Resiliciencia, European Union-NextGenerationEU, Universidad Politécnica de Madrid (RD 289/2021) and Universidad Autónoma de Madrid (CA1/RSUE/2021-00409)).
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Datos de investigación Set de datos (Dataset)

Dataset of the work "High-performance aramids with intrinsic bactericide activity"

  • Parra de la Parra, Sandra de la
  • Miguel Ortega, Alvaro
  • Fernández Pampín, Natalia
  • Rumbo Lorenzo, Carlos
  • García Pérez, José Miguel
  • Arnáiz Alonso, Ana
  • Trigo López, Miriam
The dataset contains all raw data of the work "High-performance aramids with intrinsic bactericide activity", This work was supported by the Regional Government of Castilla y León (Junta de Castilla y León), the Ministry of Science and Innovation MICIN and the European Union NextGenerationEU / PRTR, and the Spanish Agencia Estatal de Investigación (State Research Agency). We also are gratefully acknowledged to the financial support provided by Fondo Europeo de Desarrollo Regional-European Regional Development Fund (FEDER, ERDF) and Regional Government of Castilla y León-Consejería de Educación, Junta de Castilla y León (BU025P23). Author M. Trigo-López received grant PID2019-108583RJ-I00 and author J. M. García received grant PID2020-113264RB-I00, both funded by MCIN/AEI/ 10.13039/501100011033. Ana Arnaiz and Álvaro Miguel received funding from Ministerio de Universidades-European Union in the frame of NextGenerationEU RD 289/2021 (Universidad Politécnica de Madrid) and (CA1/RSUE/2021-00409) by the Universidad Autónoma de Madrid, respectively.
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publicación Artículo científico (JournalArticle)

Boosting m-aramids performance with p-oriented aromatic amide side chains

  • Miguel Ortega, Alvaro
  • Vallejos Calzada, Saúl
  • García Pérez, José Miguel
  • Trigo López, Miriam
This study aimed to enhance the mechanical properties of m-aramids by incorporating varying percentages of p-aramid side chains through copolymerization while ensuring solubility for practical applications. The mechanical performance of the resulting copolymers was compared with the commercial m-aramid, MPIA (poly(m-phenylene terephthalamide)). Notably, even with a 20% incorporation of p-aramid side chains, there was a substantial increase of 48% in Young’s modulus and 7% in tensile strength compared to MPIA. Additionally, the nitro group capping the p-aramid side chains demonstrated significant efficacy in enhancing the mechanical performance of the materials upon exposure to hydrogen. Specifically, there was an increase of more than 11% in Young’s modulus upon initial contact with hydrogen. This finding suggests potential applications in protective coatings for stainless steel used in high-pressure hydrogen storage environments. In such applications, exposure to hydrogen can accelerate embrittlement and limit operational lifespan, and coating with these materials can mitigate embrittlement and improve operational lifespan., This work was supported by the Regional Government of Castilla y León (Junta de Castilla y León), the Ministry of Science and Innovation MICIN and the European Union NextGenerationEU/PRTR, and the Spanish Agencia Estatal de Investigación (State Research Agency). Author M. Trigo-López received grant PID2019-108583RJ-I00 funded by MCIN/AEI/ 10.13039/501100011033. Álvaro Miguel-Ortega received funding from Ministerio de Universidades-European Union in the frame of NextGenerationEU RD 289/2021 (CA1/RSUE/2021-00409) by the Universidad Autónoma de Madrid.
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Datos de investigación Set de datos (Dataset)

DUBU-Polymers Research Group 21082024

  • Miguel Ortega, Alvaro
  • Vallejos Calzada, Saúl
  • García Pérez, José Miguel
  • Trigo López, Miriam
The dataset contains all raw data of the work "Boosting m-aramids performance with p-oriented aromatic amide side chains", This work was supported by the Regional Government of Castilla y León (Junta de Castilla y León), the Ministry of Science and Innovation MICIN and the European Union NextGenerationEU/PRTR, and the Spanish Agencia Estatal de Investigación (State Research Agency). Author M. Trigo-López received grant PID2019-108583RJ-I00 funded by MCIN/AEI/ 10.13039/501100011033. Álvaro Miguel received funding from Ministerio de Universidades-European Union in the frame of NextGenerationEU RD 289/2021 (CA1/RSUE/2021-00409) by the Universidad Autónoma de Madrid.
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Datos de investigación Set de datos (Dataset)

Dataset of the work "UBU-Polymers Research Group 19022024"

  • Miguel Ortega, Alvaro
  • González Moreno, Sara
  • González Martín, José Manuel
  • Arroyo Sanz, Raquel
  • García García, Félix Clemente
  • Trigo López, Miriam
  • Vallejos Calzada, Saúl
The dataset contains all raw data of the work "Improving the adhesion of satin XPS to sandstone with customized polyurethane adhesives for sustainable facade cladding and thermal insulation", We gratefully acknowledge the financial support provided by all funders. This work was supported by the Regional Government of Castilla y León (Junta de Castilla y León) and by the Ministry of Science and Innovation MICIN and the European Union NextGenerationEU PRTR. Author Saul Vallejos received grant BG22/00086 funded by the Spanish Ministerio de Universidades. Author ´Alvaro Miguel’s work was facilitated by the Margarita Salas grant (CA1/RSUE/2021–00409), funded by the Universidad Autónoma de Madrid. The financial support provided by Fondo Europeo de Desarrollo Regional-European Regional Development Fund (FEDER, ERDF) and Regional Government of Castilla y León -Consejería de Educación, Junta de Castilla y León (BU025P23) is gratefully acknowledged. We also acknowledge the funding provided by Grant PID2020-113264RB-I00 funded by MCIN/AEI/10.13039/ 501100011033 and by “ERDF A way of making Europe”.
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publicación Artículo científico (JournalArticle)

Improving the adhesion of satin XPS to sandstone with customized polyurethane adhesives for sustainable facade cladding and thermal insulation

  • Miguel Ortega, Alvaro
  • González Moreno, Sara
  • González Martín, José Manuel
  • Arroyo Sanz, Raquel
  • García García, Félix Clemente
  • Trigo López, Miriam
  • Vallejos Calzada, Saúl
Six PU adhesives were synthesised with two different polyols (PPG and PEG based) of three molecular weights, namely 400, 1000 and 2000 g mol−1, and MDI, to prepare sandstone-XPS isolating façade panels. The chemical structure, thermal properties, and adhesion properties in the preparation of the panels were evaluated. Both sandstone and XPS are commonly used materials in construction due to their excellent insulating properties, durability, flexibility, water resistance, and aesthetic appeal, making them environmentally attractive. The industry trend is towards using sanded XPS in these panels, as better adhesion is achieved with typical adhesives compared to satin or unsanded XPS. However, this entails waste generation from sanding, a higher panel price and a difference in adhesive consumption from 309 g m−2 to 684 g m−2 for unsanded (or satin) and sanded XPS, respectively. In this study, all prepared panels exhibit good adhesion properties, even those made with satin XPS. Panels prepared from PPG-based adhesives show better adhesion performance than those made from PEG, reaching 0.52 ± 0.07 N mm−2 with the 1000 g mol−1 PPG polyol-based adhesive. These highest adhesion properties are due to the optimal balance of flexible and rigid segments in the polymer material structure. The adhesive maintains its high performance even after harsh temperature and humidity conditions. After accelerated ageing with heat, cold and water, the probes retain between 65 and 71 % of the original tensile strength (0.34 ± 0.03, 0.35 ± 0.07 and 0.37 ± 0.01 N mm−2, respectively). This finding suggests an interesting starting point for cost savings associated with sanding and reduction in XPS waste generation, making them economically and environmentally appealing., We gratefully acknowledge the financial support provided by all funders. This work was supported by the Regional Government of Castilla y León (Junta de Castilla y León) and by the Ministry of Science and Innovation MICIN and the European Union NextGenerationEU PRTR. Author Saul Vallejos received grant BG22/00086 funded by the Spanish Ministerio de Universidades. Author Álvaro Miguel's work was facilitated by the Margarita Salas grant ( CA1/RSUE/2021–00409 ), funded by the Universidad Autónoma de Madrid. The financial support provided by Fondo Europeo de Desarrollo Regional-European Regional Development Fund (FEDER, ERDF) and Regional Government of Castilla y León -Consejería de Educación, Junta de Castilla y León- ( BU025P23 ) is gratefully acknowledged. We also acknowledge the funding provided by Grant PID2020-113264RB-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”.