Pasar al contenido principal

NUCLEO DE CONTROL EN SISTEMAS DISTRIBUIDOS

DPI2008-06737-C02-01

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación Fundamental no Orientada
Convocatoria Proyectos I+D
Año convocatoria 2008
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Subdirección General de Proyectos de Investigación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA
Identificador persistente http://dx.doi.org/10.13039/501100004837

Resultados relacionados

Resultados totales (Incluyendo duplicados): 14
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Formal Specification and Design Techniques for Wireless Sensor and Actuator Networks

  • Martínez Castro, Diego
  • Gonzalez, Apolinar
  • Aquino, Raul
  • Blanes Noguera, Francisco|||0000-0002-9234-5377
  • Simó Ten, José Enrique|||0000-0003-4677-7627
  • Crespo, Alfons|||0000-0002-6606-7406
A current trend in the development and implementation of industrial applications is to use wireless networks to communicate the system nodes, mainly to increase application flexibility, reliability and portability, as well as to reduce the implementation cost. However, the nondeterministic and concurrent behavior of distributed systems makes their analysis and design complex, often resulting in less than satisfactory performance in simulation and test bed scenarios, which is caused by using imprecise models to analyze, validate and design these systems. Moreover, there are some simulation platforms that do not support these models. This paper presents a design and validation method forWireless Sensor and Actuator Networks (WSAN) which is supported on a minimal set of wireless components represented in Colored Petri Nets (CPN). In summary, the model presented allows users to verify the design properties and structural behavior of the system. ©2011 by the authors., This work was developed as a part of the D2ARS Project supported by CYTED. UNESCO code 120325; 330417; 120314; 120305, the TURTLE project (Securizacion de Sistemas Embebidos Distribuidos), funded by the program AVANZA I+D del Ministerio de Industria, Turismo y Comercio of the Spanish Government and the SIDERELI project DPI2008-06737-C02-01/02 (Ministerio de Ciencia e Innovacion of Spain and European founds FEDER).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A non-uniform predictor-observer for a networked control system

  • Cuenca, Ángel|||0000-0003-4466-2666
  • García Gil, Pedro José|||0000-0002-1202-1269
  • Albertos Pérez, Pedro
  • Salt Llobregat, Julián José|||0000-0002-9640-2658
This paper presents a Non-Uniform Predictor-Observer (NUPO) based control approach in order to deal with two of the main problems related to Networked Control Systems (NCS) or Sensor Networks (SN): time-varying delays and packet loss. In addition, if these delays are longer than the sampling period, the packet disordering phenomenon can appear. Due to these issues, a (scarce) nonuniform, delayed measurement signal could be received by the controller. But including the NUPO proposal in the control system, the delay will be compensated by the prediction stage, and the nonavailable data will be reconstructed by the observer stage. So, a delay-free, uniformly sampled controller design can be adopted. To ensure stability, the predictor must satisfy a feasibility problem based on a time-varying delay-dependent condition expressed in terms of Linear Matrix Inequalities (LMI). Some aspects like the relation between network delay and robustness/performance trade-off are empirically studied. A simulation example shows the benefits (robustness and control performance improvement) of the NUPO approach by comparison to another similar proposal. © ICROS, KIEE and Springer 2011., This work was supported by the Spanish Ministerio de Ciencia y Tecnologia Projects DPI2008-06737-C02-01 and DPI2009-14744-C03-03, by Generalitat Valenciana Project GV/2010/018, by Universidad Politecnica de Valencia Project PAID06-08.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Robustness of a discrete-time predictor-based controller for time-varying measurement delay

  • Gonzalez, A.
  • Castillo, P
  • García Gil, Pedro José|||0000-0002-1202-1269
  • Albertos Pérez, Pedro
  • Lozano, R.
A predictor-based controller for time-varying delay systems is presented in this paper and its robustness properties for different uncertainties are analyzed. First, a time-varying delay dependent stability condition is expressed in terms of LMIs. Then, uncertainties in the knowledge of all plant-model parameters are considered and the resulting closed-loop system is shown to be robust with respect to these uncertainties. A significant improvement with respect to the same control strategy without predictor is achieved. The scheme is applicable to open-loop unstable plants and it has been tested in a real-time application to control the roll angle of a quad-rotor helicopter prototype. The experimental results show good performance and robustness of the proposed scheme even in the presence of long delay uncertainties. © 2011 Elsevier Ltd., This work has been partially granted by Conselleria de Educacion under PROMETEO project number 2008-088, and CICYT no. DPI2008-06737-C02-01 from Spanish government.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A transfer-function approach to dual-rate controller design for unstable and non-minimum phase plants

  • Salt Llobregat, Julián José|||0000-0002-9640-2658
  • Sala, Antonio|||0000-0002-5691-8772
  • Albertos Pérez, Pedro
An algebraic design via Diophantine equations of dual-rate regulators for linear unstable and non-minimum-phase plants, generalizing the well-known constraints for the reference model in single-rate systems, is presented in this brief. This brief improves previous results achieving internal stability for this kind of plants, by means of adapting the Youla parametrization of all stabilizing controllers to the dual-rate case. A simulation example on a robotic model, as well as an experimental magnetic levitation setup, are presented., Manuscript received May 28, 2009; revised May 28, 2010; accepted August 15, 2010. Manuscript received in final form September 03, 2010. Date of publication October 04, 2010; date of current version August 17, 2011. Recommended by Associate Editor N. K. Kazantzis. This work was supported by Grant DPI2009-14744-C03-03, Grant DPI2008-06731-C02-01, and Grant DPI2008-06737-C02-01 from the Spanish Government and by Grant PROMETEO/2008/088 from Generalitat Valenciana.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A delay-dependent dual-rate PID controller over an ethernet network

  • Cuenca, Ángel|||0000-0003-4466-2666
  • Salt Llobregat, Julián José|||0000-0002-9640-2658
  • Sala, Antonio|||0000-0002-5691-8772
  • Pizá, Ricardo|||0000-0001-8261-0045
n this paper, a methodology to design controllers able to cope with different load conditions on an Ethernet network is introduced. Load conditions induce time-varying delays between measurements and control. To face these variations an interpolated, delay-dependent gain scheduling law is used. The lack of synchronization is solved by adopting an event-based control approach. The dual-rate control action computation is carried out at a remote controller, whereas control actions and measurements are taken out locally at the controlled process site. Stability is proved in terms of probabilistic linear matrix inequalities. TrueTime simulations in an Ethernet case show the benefit of the proposal, which is later validated on an experimental test-bed Ethernet environment., Manuscript received June 07, 2010; revised September 05, 2010; accepted September 15, 2010. Date of publication October 18, 2010; date of current version February 04, 2011. The authors A. Cuenca, J. Salt, and R. Piza are grateful to Grant PAID06-08 by the Universidad Politecnica de Valencia, Grant dpi2009-14744-c03-03 from the Spanish Ministry of Education, and Grant gv/2010/018 by Generalitat Valenciana. In addition, A. Cuenca is grateful to Grant dpi2008-06737-c02-01 by the Spanish Ministry of Education, and A. Sala is grateful to the financial support of the Spanish Ministry of Education Research Grant dpi2008-06731-c02-01, and Generalitat Valenciana Grant prometeo/2008/088. Paper no. TII-10-06-0127.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Control embebido de robots móviles con recursos limitados basado en flujo óptico

  • Sanahuja, G.
  • Marin Paniagua, Leonardo Jose
  • Valera Fernández, Ángel|||0000-0001-6843-6394
  • Sánchez Salmerón, Antonio José|||0000-0003-1896-5356
  • Ricolfe Viala, Carlos|||0000-0002-2980-4569
  • Vallés Miquel, Marina|||0000-0002-6396-0098
[ES] Desde el punto de vista de la robótica móvil, la visión artificial juega un papel muy importante para obtener información global del entorno imprescindible para, por ejemplo, la generación automática de trayectorias o la evitación de obstáculos. Mediante técnicas de flujo óptico de visión artificial se puede obtener la estimación de movimientos del observador y de objetos, la estructura de éstos, el entorno, etc. Desde el punto de vista de la implementación, la carga computacional que presenta un algoritmo para el cálculo del flujo óptico es elevada, lo que suele provocar problemas para su utilización en aplicaciones de robótica móvil, aviones y/o helicópteros autoguiados, robots submarinos, etc. En este artículo se presenta la implementación realizada de un control de movimiento basado en el flujo óptico de un micro robot móvil con recursos muy limitados. Además, los resultados obtenidos con este robot son extrapolables a cualquier otro tipo de sistemas móviles, Los autores desean expresar su agradecimiento al Plan Nacional de I+D+I del Ministerio de Ciencia e Innovación por la financiación parcial de este trabajo bajo los proyectos DPI2008-06737-C02-01 y DPI2010-20814-C02-02.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

New possibilistic method for discovering linear local behavior using hyper-Gaussian distributed membership function

  • Barcelo-Rico, F.
  • Diez, José-Luís|||0000-0002-5659-1212
  • Bondía Company, Jorge|||0000-0001-7286-3719
[EN] This paper presents a method to find a model of a system based on the integration of a set of local models. Mainly, properties are sought for the local models: independence of clusters and interpretability of their validity. This has been achieved through the introduction of a possibilistic clustering for the first property and a pre-fixed shape of the membership functions for the second one. A new cost index for the clustering optimization problem has been defined consisting of two terms: one for global error and another for local errors. By giving higher importance to the local errors term, local models valid regionally can be found. To avoid local optima and numerical issues, the parameters of the models are found using global optimization. This new method has been applied to several data sets, and results show how the desired characteristics can be achieved in the resulting models., The authors acknowledge the partial funding of this work by the projects: the national projects DPI2007-66728-C02-01 and DPI2008-06737-C02-01. The first author is recipient of a fellowship from the Spanish Ministry of Education (FPU AP2008-02967). The translation of this paper was funded by the Universidad Politecnica de Valencia, Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Video Sensor Architecture for Surveillance Applications

  • Sánchez Peñarroja, Jordi
  • Benet Gilabert, Ginés|||0000-0003-3856-5501
  • Simó Ten, José Enrique|||0000-0003-4677-7627
This paper introduces a flexible hardware and software architecture for a smart video sensor. This sensor has been applied in a video surveillance application where some of these video sensors are deployed, constituting the sensory nodes of a distributed surveillance system. In this system, a video sensor node processes images locally in order to extract objects of interest, and classify them. The sensor node reports the processing results to other nodes in the cloud (a user or higher level software) in the form of an XML description. The hardware architecture of each sensor node has been developed using two DSP processors and an FPGA that controls, in a flexible way, the interconnection among processors and the image data flow. The developed node software is based on pluggable components and runs on a provided execution run-time. Some basic and application-specific software components have been developed, in particular: acquisition, segmentation, labeling, tracking, classification and feature extraction. Preliminary results demonstrate that the system can achieve up to 7.5 frames per second in the worst case, and the true positive rates in the classification of objects are better than 80%. © 2012 by the authors; licensee MDPI, Basel, Switzerland., This work has been partially supported by SENSE project (Specific Targeted Research Project within the thematic priority IST 2.5.3 of the 6th Framework Program of the European Commission: IST Project 033279), and has been also co-funded by the Spanish research projects SIDIRELI: DPI2008-06737-C02-01/02 and COBAMI: DPI2011-28507-C02-02, both partially supported with European FEDER funds.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Modelling and control of a continuous distillation tower through fuzzy techniques

  • Barceló Rico, Fátima
  • Gozálvez-Zafrilla, José M.|||0000-0003-4419-6765
  • Diez, José-Luís|||0000-0002-5659-1212
  • Santafé Moros, María Asunción|||0000-0002-0933-108X
This paper presents a methodology for the design of a fuzzy controller applicable to continuous processes based on local fuzzy models and velocity linearizations. It has been applied to the implementation of a fuzzy controller for a continuous distillation tower. Continuous distillation towers can be subjected to variations in feed characteristics that cause loss of product quality or excessive energy consumption. Therefore, the use of a fuzzy controller is interesting to control process performance.A dynamic model for continuous distillation was implemented and used to obtain data to develop the fuzzy controller at different operating points. The fuzzy controller was built by integration of linear controllers obtained for each linearization of the system. Simulation of the model with controller was used to validate the controller effectiveness under different scenarios, including a study of the sensibility of some parameters to the control.The results showed that the fuzzy controller was able to keep the target output in the desired range for different inputs disturbances, changing smoothly from a predefined target output to another. The developed techniques are applicable to more complex distillation systems including more operating variables, The authors acknowledge the partial funding of this work by the projects: Regional Government Project GVPRE/2008/108, and National Projects DPI2007-66728-C02-01 and DPI2008-06737-C02-01.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Modelado y Resolución del Problema Dinámico Inverso y Directo en Tiempo Real de Robots Industriales, Robot Modeling and Dynamic Parameter Identificacion. Inverse Dynamic Problem Resolution in Real Time

  • Rosillo, N.
  • Valero Chuliá, Francisco José
  • Valera Fernández, Ángel|||0000-0001-6843-6394
  • Benimeli, Francesc|||0000-0001-8565-5548
  • Mata Amela, Vicente|||0000-0003-2255-0567
[ES] Este trabajo presenta el desarrollo y la validación de una metodología que permite el modelado y la identificación de los parámetros dinámicos de robots manipuladores. La ecuación dinámica del robot está basada en la ecuación de movimiento de Gibbs-Appell, proporcionando un conjunto de ecuaciones bien estructuradas que pueden ser calculadas en tiempo real. Además, se puede expandir fácilmente el modelo dinámico, lo que permite incluir en éste por ejemplo el efecto de la dinámica de los actuadores y el fenómeno de la fricción. El artículo propone dos métodos para la identificación del modelado dinámico de robots, estos procedimientos han sido aplicados a un robot industrial PUMA 560 equipado con una arquitectura abierta de control basada en un computador personal industrial. Finalmente se han construido las ecuaciones de la dinámica inversa a partir de los parámetros dinámicos identificados y han sido implementadas en tiempo real., [EN] This work presents the development and validation of a methodology allowing dynamic parameter identification in robotic manipulators. The dynamic equations of the robot are based on the Gibbs-Appell equations of motion, yielding well structured equations which can be computed in real time and make the model easily expandable, which allows to include the actuator dynamic effect and the friction phenomenon. This paper also deals with dynamic modeling identification in robotic manipulators. Two different methods are proposed and validated on an industrial robotic system: a PUMA 560 provided with an open control architecture based on an industrial personal computer. Finally, using the dynamic parameters identified, the inverse dynamic equations have been obtained and implemented in real time., Los autores desean expresar su agradecimiento al Plan Nacional de I+D, Comisión Interministerial de Ciencia y Tecnología (FEDER-CICYT) por la financiación parcial de este trabajo bajo los proyectos DPI2008-06737-C02-01 y DPI2009-13830-C02-01.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Procedimiento de Diseño para Minimizar el Consumo de Potencia y los retrasos en WSAN, Design procedure to minimize power consumption and latency in WSAN

  • Martínez, Diego
  • Balbastre, Patricia|||0000-0001-9458-4083
  • Blanes Noguera, Francisco|||0000-0002-9234-5377
  • Simó Ten, José Enrique|||0000-0003-4677-7627
  • Crespo, Alfons|||0000-0002-6606-7406
[EN] Currently there is great interest in the development of industrial applications using wireless networks, principally to increase flexibility and reliability of these applications and to reduce the implementation cost. However, in control applications, as a consequence of latency and jitter generated by the network, not always a similarity between experimental results and desired performance can be obtained. This is because imprecise models for analyzing and designing these systems have been used, and to use inadequate validation methods and platforms that do not support the models utilized. This paper presents a design method to get a system optimal configuration in order to fulfill with desired performance in control applications and a significant energy saving., [ES] Actualmente existe un gran interés por el desarrollo de aplicaciones industriales utilizando redes inalámbricas, principalmente por el aumento de la flexibilidad del sistema y la disminución de los costos de implementación. Sin embargo, los retrasos y el jitter que introduce la red de comunicaciones en las aplicaciones de control, han dado lugar a que en algunos casos no se obtenga una buena correspondencia entre los resultados experimentales y los objetivos de control propuestos, esto como consecuencia del uso de modelos imprecisos para analizar y diseñar estos sistemas, métodos de validación poco elaborados y plataformas que no soportan los modelos empleados. En este trabajo se presenta un procedimiento de diseño que permite encontrar un modo de funcionamiento óptimo del sistema, que garantiza el cumplimiento de los plazos de tiempo de las aplicaciones, y minimiza el consumo de potencia y los retrasos., Este trabajo fue financiado parcialmente por el proyecto D2ARS de CYTED, código UNESCO: 120325; 330417; 120314; 120305, y por el proyecto SIDIRELI DPI2008-06737-C02-01/02 financiado por el Ministerio de Ciencia e Innovación español y fondos europeos FEDER.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Embedded Distributed Vision System for Humanoid Soccer Robot

  • Blanes Noguera, Francisco|||0000-0002-9234-5377
  • Muñoz-Benavent, Pau|||0000-0003-4681-183X
  • Simó Ten, José Enrique|||0000-0003-4677-7627
  • Albero Gil, Miguel
  • Muñoz Alcobendas, Manuel
  • Coronel Parada, Javier Osvaldo
[EN] Computer vision is one of the most challenging applications in sensor systems since the signal is complex from spatial and logical point of view. Due to these characteristics vision applications require high computing resources, which makes them especially difficult to use in embedded systems, like mobile robots with reduced amount memory and computing power. In this work a distributed architecture for humanoid visual control is presented using specific nodes for vision processing cooperating with the main CPU to coordinate the movements of the exploring behaviours. This architecture provides additional computing resources in a reduced area, without disturbing tasks related with low level control (mainly kinematics) with the ones involving vision processing algorithms. The information is exchanged allowing to linking control loops between both nodes., This work was supported from the Spanish MICINN project SIDIRELI DPI2008-06737-C02-01/02 and FEDER founds.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Smart video sensors for 3D scene reconstruction of large infrastructures

  • Ripollés Mateu, Óscar Enrique
  • Simó Ten, José Enrique|||0000-0003-4677-7627
  • Benet Gilabert, Ginés|||0000-0003-3856-5501
  • Vivó, Roberto|||0000-0002-0751-4114
This paper introduces a new 3D-based surveillance solution for large infrastructures. Our proposal is based on an accurate 3D reconstruction using the rich information obtained from a network of intelligent video-processing nodes. In this manner, if the scenario to cover is modeled in 3D with high precision, it will be possible to locate the detected objects in the virtual representation. Moreover, as an improvement over previous 2D solutions, having the possibility of modifying the view point enables the application to choose the perspective that better suits the current state of the scenario. In this sense, the contextualization of the events detected in a 3D environment can offer a much better understanding of what is happening in the real world and where it is exactly happening. Details of the video processing nodes are given, as well as of the 3D reconstruction tasks performed afterwards. The possibilities of such a system are described and the performance obtained is analyzed., This work has been partially supported by the ViCoMo project (ITEA2 project IP08009 funded by the Spanish MICINN with project TSI-020400-2011-57), the Spanish Government (TIN2009-14103-C03-03, DPI2008-06737-C02-01/02 and DPI 2011-28507-C02-02) and European FEDER funds.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Robustness analysis of discrete predictor-based controllers for input-delay systems

  • González Sorribes, Antonio|||0000-0003-2690-0472
  • Sala, Antonio|||0000-0002-5691-8772
  • García Gil, Pedro José|||0000-0002-1202-1269
  • Albertos Pérez, Pedro
In this article, robustness to model uncertainties are analysed in the context of discrete predictor-based state-feedback controllers for discrete-time input-delay systems with time-varying delay, in an LMI framework. The goal is comparing robustness of predictor-based strategies with respect to other (sub)optimal state feedback ones. A numerical example illustrates that improvements in tolerance to modelling errors can be achieved by using the predictor framework., The authors are grateful for grant nos. DPI2008-06737-C02-01, DPI2008-06731-C02-01, DPI2011-27845-C02-01 and PROMETEO/2008/088 from the Spanish and Valencian governments.