Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 59
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Recovery of zinc from spent pickling solutions using an electrochemical reactor in presence and absence of an anion-exchange membrane: Galvanostatic operation

  • Carrillo Abad, Jorge
  • García Gabaldón, Montserrat|||0000-0003-4254-6733
  • Ortega Navarro, Emma María|||0000-0001-6902-018X
  • Pérez-Herranz, Valentín|||0000-0002-4010-0888
The performance of a one- and two-compartment electrochemical reactor under galvanostatic control for zinc recovery present in the spent pickling solutions is studied in this paper. These solutions, which mainly contain ZnCl 2 and FeCl 2 in aqueous HCl media, come from the hot dip galvanizing industry. The effect of the anion-exchange membrane (AEM) on the figures of merit of the electrochemical reactor is analyzed. In the absence of iron in solution, as the current value was shifted towards more negative values, the zinc fractional conversion increased because of the increase in the zinc reduction rate. However, the increase in current values made current efficiency decrease due to the hydrogen-reduction side reaction, which caused an increment in the specific energy consumption. The presence of iron in synthetic solutions led to a decrease in current efficiency associated with the reverse redox Fe 2+/Fe 3+ system and to the enhancement of the HER, which also induced increments in the local pH and the subsequent zinc redissolution. These adverse effects related to the presence of iron could be minimized by the interposition of an AEM. In this case, the zinc redissolution was eliminated which enabled zinc conversion values close to 100% together with higher current efficiencies as the consumption of current by the system Fe 2+/Fe 3+ was diminished. © 2012 Elsevier B.V. All rights reserved., Authors want to express their gratitude to the Universidad Politecnica de Valencia for the economic support in the Project Reference PAID-06-08, and to the Generalitat Valenciana for the financing of the Project Reference GV/2010/029.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Self-similar focusing with generalized devil&apos, s lenses

  • Casanova, Cristina
  • Furlan, Walter D.
  • Remón Martín, Laura
  • Calatayud Calatayud, Arnau
  • Mendoza-Yero, Omel
  • Monsoriu Serra, Juan Antonio|||0000-0003-3350-7951
[EN] We introduce the generalized devil's lenses (GDLs) as a new family of diffractive kinoform lenses whose structure is based on the generalized Cantor set. The focusing properties of different members of this family are analyzed. It is shown that under plane wave illumination the GDLs give a single main focus surrounded by many subsidiary foci. It is shown that the total number of subsidiary foci is higher than the number of foci corresponding to conventional devil's lenses; however, the self-similar behavior of the axial irradiance is preserved to some extent. (C) 2011 Optical Society of America, We acknowledge the financial support from the Ministerio de Ciencia e Innovacion, Spain, grants DPI2008-02953, TRA2009-0215, and FIS2010-15746. We also acknowledge the support from Generalitat Valenciana (PROMETEO2009-077 and ACOMP/2010/052), and from Universidad Politecnica de Valencia, Spain (PAID-05-09 and PAID-06-08). L. Remon acknowledges a fellowship of "Fundacion Cajamurcia," Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Desarrollo computacional de piezas de fachada ventilada para la mejora de su respuesta a flexión

  • Defez Garcia, Beatriz|||0000-0002-3658-6766
  • Peris Fajarnes, Guillermo|||0000-0001-9215-9091
  • Santiago-Praderas, Victor|||0000-0001-7765-8300
  • Lengua, Ismael
  • Soria, José Manuel
[ES] La fachada cerámica ventilada es un producto en auge en el sector de la construcción actual. Para cubrir los requerimientos del mercado sin perder competitividad, es necesario desplegar técnicas de diseño que permitan fabricar nuevos modelos con mejores prestaciones mecánicas a menor coste y ciclos de desarrollo más rápidos. En este trabajo se desarrolla una metodología de diseño geométrico de fachadas ventiladas destinada a incrementar la resistencia a flexión de las piezas, basada en modelado asistido por ordenador y imulación por elementos finitos. La resistencia a flexión es el indicador comúnmente usado para medir la resistencia mecánica de las fachadas, y su valor debe cumplir con los mínimos establecidos en la norma de calidad en la fabricación ISO 10545. En el desarrollo de la metodología se aborda con detalle la obtención experimental de las propiedades del material empleado, y la adecuación de ciertas simplificaciones necesarias para una simulación útil. Finalmente, la metodología ha sido validada experimentalmente., Esta investigación ha sido financiada en el marco del proyecto “MODELADO SÓLIDO TRIDIMENSIONAL Y ANÁLISIS POR ELEMENTOS FINITOS PARA LA SIMULACIÓN DE LA LÍNEA DE PRODUCCIÓN CERÁMICA”, referencia: PAID06-08-3162, subvencionado por la Universitat Politécnica de València, y por la empresa Cerámica Mayor, S.L. Resultados previos de este trabajo fueron expuestos en el LII Congreso de la Sociedad Española de Cerámica y Vidrio, celebrado en Burgos del 3 al 6 de octubre de 2012, a través de póster “METODOLOGÍA PARA LA EVALUACIÓN DE PIEZAS DE FACHADA VENTILADA MEDIANTE SIMULACIÓN NUMÉRICA”. Los autores expresan una vez más su agradecimiento a la empresa Cerámica Mayor por contribuir a este trabajo con sus materiales y equipos.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Comparison of TOF and SL techniques for in-line measurement of food item volume using animal and vegetable tissues

  • Verdú-Amat, Samuel|||0000-0002-3910-4582
  • Ivorra, Eugenio|||0000-0001-6062-2061
  • Sánchez Salmerón, Antonio José|||0000-0003-1896-5356
  • Girón Hernández, Lunier Joel
  • Barat Baviera, José Manuel|||0000-0001-8487-7114
  • Grau Meló, Raúl|||0000-0002-0540-5539
A comparison between the techniques Time of flight (TOF) and Structured Light (SL), for in-line process, was carried out to determine the volume of several food types with different compositions, structures and dimensions; 2 meat tissue (lean meat and pork fat) and 3 vegetable tissue (potato, apple and avocado). The volume obtained was compared with that determined by physical measurements, employing two statistical methods (a BlandeAltman study and partial least square analysis). Results showed that Structured Light (SL) was a better technique than Time of flight (TOF) for determining volume. The TOF technique was affected by factors which were more influential when the S/V ratio (surface of the sample exposed to the camera and sample volume) increased. SL was slightly affected by the composition of the sample. Fat content and the level of unsaturated fatty acids could be the reason for the reflection of the laser light on the surface of the samples thereby reducing the accuracy. Even so, the values of R2 and RMSE of cross-validation, for the worst fit, demonstrated the quality of the SL technique., We wish to thank the Polytechnic University of Valencia and Generalitat Valenciana for the financial support they provided through the PAID-06-08-3251 and GVPRE/2008/170 Projects, respectively.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Photochemical and photophysical properties of dibenzoylmethane derivatives within protein

  • Marín Melchor, Mireia
  • PARIS, CECILIA GERTRUDIS
  • Yamaji, Minoru
  • Lhiaubet, Virginie Lyria|||0000-0002-8205-8892
  • Miranda Alonso, Miguel Ángel
In the present work, three dibenzoylmethane derivatives in their beta-diketo form have been selected to investigate their photophysical and photochemical behavior upon interaction with human serum albumin (HSA). In organic solvents, absorption and phosphorescence emission spectra of the a-bromo derivative of avobenzone (BrAB) were similar to those of the a-methylated and a-propyl analogs (MeAB and PrAB). However, laser flash photolysis experiments revealed a different transient species centered at 350 nm, assigned to the radical obtained from a singlet excited state dehalogenation process. Interestingly, the transient absorption spectrum of BrAB within HSA showed the typical features of the beta-diketone triplet excited state. In the case of MeAB and PrAB derivatives, binding to HSA was associated with a significant increase of their triplet lifetimes as compared to acetonitrile. Finally, the Norrish type II process has been considered as a model to evaluate the influence of the protein microenvironment on the photoreactivity. In this context, photodegradation of PrAB in aerated solutions, to give avobenzone (AB), has been monitored by UV spectroscopy. Interestingly, the quantum yields of AB formation were markedly dependent on the reaction medium (1.4 10(-2) in acetonitrile and 3.9 10(-2) within albumin medium); by contrast, chemical yields of ca. 50% were obtained in both cases., Spanish Government (CTQ2009-13699 project, Ramon y Cajal contract to V. L.-V. and JAE pre-doc contract to M. M.), Generalitat Valenciana (Prometeo Program 2008/090 and GV/2009/051 projects) and Universidad Politecnica de Valencia (PAID 06-08 project) are gratefully acknowledged for financial support. M. Y. is grateful for a financial support, Grant-in-Aid for Scientific Research (KAKENHI) from JSPS.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Electrochemical Study of a Simulated Spent Pickling Solution

  • García Gabaldón, Montserrat|||0000-0003-4254-6733
  • Ortega Navarro, Emma María|||0000-0001-6902-018X
  • Pérez-Herranz, Valentín|||0000-0002-4010-0888
  • Carrillo Abad, Jordi
[EN] The electrochemical behaviour of the main components of the rinsing pickling solutions of the hot dip galvanizing industry, Zn(2+) and Fe(2+) in HCl, was studied by cyclic voltammetry. The effect of different variables (such as the scan rate, the inversion potential, the addition of zinc, stirring of the solution and the presence of iron) on the current-potential curves was studied. The electrochemical reduction of zinc proceeded by a typical nucleation process. Decreasing the HCl concentration enhanced the zinc UPD process because of the less influence of the hydrogen evolution reaction (HER), and a prepeak corresponding to the zinc UPD process was observed previously to the zinc OPD step. The effect of the scan rate on the OPD peak was studied and showed that the Zn(2+) reduction was an irreversible process which was not only controlled by diffusion but also charge transfer kinetics. The diffusion coefficient of zinc was calculated (1.66. 10(-9) m(2) s(-1)). In view of iron deposition, it was confirmed that the pH is an essentially important factor and at low pH values was virtually impossible to deposit iron. The electrochemical study of mixtures containing both zinc and iron showed that the presence of zinc produced an inhibition of the iron deposition process which was confirmed by the observation of the deposits. The SEM images revealed only the presence of zinc grains. However, if the ratio Fe(II)/Zn(II) was higher, the voltammograms main features were more similar to those obtained for pure iron solutions., Montserrat Garcia Gabaldón wants to express their gratitude to the Universidad Politecnica de Valencia for the economical support in the project reference: PAID-06-08, and to the Generalitat Valenciana for the financing of the project reference: GV/2010/029.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Multiplication operators in Kothe-Bochner spaces

  • Calabuig, J. M.|||0000-0001-8398-8664
  • Sánchez Pérez, Enrique Alfonso|||0000-0001-8854-3154
  • Rodriguez, J.
Let X be a Banach space and E an order continuous Banach function space over a finite measure mu. We prove that an operator T in the Kothe-Bochner space E(X) is a multiplication operator (by a function in L(infinity)(mu)) if and only if the equality T(g < f, x*> x) = g < T(f), x*> x holds for every g is an element of L(infinity)(mu), f is an element of E(X), x is an element of X and x* is an element of X*. (C) 2010 Elsevier Inc., J.M. Calabuig was supported by MEC and FEDER (project MTM2008-04594) and Generalitat Valenciana (project GV/2009/102). J. Rodriguez was supported by MEC and FEDER (project MTM2008-05396) and Fundacion Seneca (project 08848/PI/08). E.A. Sanchez-Perez was supported by MEC and FEDER (project MTM2009-14483-C02-02). The authors were also supported by Universidad Politecnica de Valencia (project PAID-06-08-3093).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Crossed mixture process design approach to model nanofiltration rejection for non-dilute multi-ionic solutions in a given range of solution compositions

  • Gozálvez-Zafrilla, José M.|||0000-0003-4419-6765
  • Santafé Moros, María Asunción|||0000-0002-0933-108X
  • García-Díaz, J. Carlos|||0000-0002-5559-7110
The goal of the present work is to illustrate the applicability of crossed mixture-process design to predict the rejection of the nanofiltration membranes when treating non-dilute solutions. The method used in this work is based on the use of mixture factors derived from the fractions of equivalents of the major ions present in solution combined with the total concentration as a process variable. In this way, polynomial models for permselectivity properties can be obtained.Model accuracy is improved by using pseudo-components to restrict the range of the composition variables to that expected for the feed water compositions. The experimental plan uses the D-optimal criterion. As an application example, the procedurewas used to model the performance of the nanofiltration membrane NF270 (Dow-Filmtec) with ionicmixtures containing chloride, nitrate, sulfate, sodium and calcium. The experimentswere carried out in a pilot plantwith solutions of total concentration ranging from 2480 to 4050 mg/L. The obtained polynomialmodels could satisfactorily describe individual ion rejection despite the solutions not being dilute. The polynomial models can be useful for design and operation purposes as an alternative to physical-based nanofiltration models., The Spanish Ministry for Science and Innovation (Project OPTIMEM CTM2010-20248) and the Universitat Politecnica de Valencia (PAID-06-08-3287) are kindly acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A Komlós Theorem for abstract Banach latticesof measurable functions

  • Jiménez Fernández, Eduardo
  • Juan Blanco, María Aránzazu
  • Sánchez Pérez, Enrique Alfonso|||0000-0001-8854-3154
Consider a Banach function space X(mu) of (classes of) locally integrable functions over a sigma-finite measure space (Omega, Sigma, mu) with the weak sigma-Fatou property. Day and Lennard (2010) [9] proved that the theorem of Komlos on convergence of Cesaro sums in L(1) [0, 1] holds also in these spaces; i.e. for every bounded sequence (f(n))(n) in X(mu), there exists a subsequence (f(nk))(k) and a function f is an element of X(mu) such that for any further subsequence (h(j))(j) of (f(nk))(k), the series 1/n Sigma(n)(j=1) h(j) converges mu-a.e. to f. In this paper we generalize this result to a more general class of Banach spaces of classes of measurable functions - spaces L(1) (nu) of integrable functions with respect to a vector measure nu on a delta-ring - and explore to which point the Fatou property and the Komlos property are equivalent. In particular we prove that this always holds for ideals of spaces L(1)(nu) with the weak sigma-Fatou property, and provide an example of a Banach lattice of measurable functions that is Fatou but do not satisfy the Komlos Theorem. (C) 2011 Elsevier Inc., MA. Juan acknowledges the support of the Ministerio de Ciencia e Innovacion (Spain) under the research project MTM2008-04594: Generalitat Valenciana (2009/102) and UPV (PAID-06-08 Ref. 3093).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

The weak topology on q-convex Banach function spaces

  • Agud Albesa, Lucia|||0000-0002-1222-7988
  • Calabuig, J. M.|||0000-0001-8398-8664
  • Sánchez Pérez, Enrique Alfonso|||0000-0001-8854-3154
Let X(mu) be a Banach function space. In this paper we introduce two new geometric notions, q-convexity and weak q-convexity associated to a subset S of the unit ball of the dual of X(mu), 1 = q < 8. We prove that in the general case both notions are not equivalent and we study the relation between them, showing that they can be used for describing the weak topology in these spaces. We define the canonical q-concave weak topology tq on X(mu)a topology generated by q-concave seminormsfor obtaining our main result: A s-order continuous Banach function space X(mu) is q-convex if and only if the following topological inclusions twtqt . hold. As an application, in the last section we prove a suitable Maurey-Rosenthal type factorization theorem for operators from a Banach function space X(mu) into a Banach space that holds under weaker assumptions on the q-convexity requirements for X(mu)., The research of the second named author was partially supported by MEC and FEDER (project MTM2008-04594) and GV/2009/102 (Conselleria de Educacion), and the third one was partially suipported by MEC and FEDER (project MTM2009-14483-C02-02). Both were also supported by Universidad Politecnica de Valencia (project PAID-06-08-3093).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A non-uniform predictor-observer for a networked control system

  • Cuenca, Ángel|||0000-0003-4466-2666
  • García Gil, Pedro José|||0000-0002-1202-1269
  • Albertos Pérez, Pedro
  • Salt Llobregat, Julián José|||0000-0002-9640-2658
This paper presents a Non-Uniform Predictor-Observer (NUPO) based control approach in order to deal with two of the main problems related to Networked Control Systems (NCS) or Sensor Networks (SN): time-varying delays and packet loss. In addition, if these delays are longer than the sampling period, the packet disordering phenomenon can appear. Due to these issues, a (scarce) nonuniform, delayed measurement signal could be received by the controller. But including the NUPO proposal in the control system, the delay will be compensated by the prediction stage, and the nonavailable data will be reconstructed by the observer stage. So, a delay-free, uniformly sampled controller design can be adopted. To ensure stability, the predictor must satisfy a feasibility problem based on a time-varying delay-dependent condition expressed in terms of Linear Matrix Inequalities (LMI). Some aspects like the relation between network delay and robustness/performance trade-off are empirically studied. A simulation example shows the benefits (robustness and control performance improvement) of the NUPO approach by comparison to another similar proposal. © ICROS, KIEE and Springer 2011., This work was supported by the Spanish Ministerio de Ciencia y Tecnologia Projects DPI2008-06737-C02-01 and DPI2009-14744-C03-03, by Generalitat Valenciana Project GV/2010/018, by Universidad Politecnica de Valencia Project PAID06-08.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A delay-dependent dual-rate PID controller over an ethernet network

  • Cuenca, Ángel|||0000-0003-4466-2666
  • Salt Llobregat, Julián José|||0000-0002-9640-2658
  • Sala, Antonio|||0000-0002-5691-8772
  • Pizá, Ricardo|||0000-0001-8261-0045
n this paper, a methodology to design controllers able to cope with different load conditions on an Ethernet network is introduced. Load conditions induce time-varying delays between measurements and control. To face these variations an interpolated, delay-dependent gain scheduling law is used. The lack of synchronization is solved by adopting an event-based control approach. The dual-rate control action computation is carried out at a remote controller, whereas control actions and measurements are taken out locally at the controlled process site. Stability is proved in terms of probabilistic linear matrix inequalities. TrueTime simulations in an Ethernet case show the benefit of the proposal, which is later validated on an experimental test-bed Ethernet environment., Manuscript received June 07, 2010; revised September 05, 2010; accepted September 15, 2010. Date of publication October 18, 2010; date of current version February 04, 2011. The authors A. Cuenca, J. Salt, and R. Piza are grateful to Grant PAID06-08 by the Universidad Politecnica de Valencia, Grant dpi2009-14744-c03-03 from the Spanish Ministry of Education, and Grant gv/2010/018 by Generalitat Valenciana. In addition, A. Cuenca is grateful to Grant dpi2008-06737-c02-01 by the Spanish Ministry of Education, and A. Sala is grateful to the financial support of the Spanish Ministry of Education Research Grant dpi2008-06731-c02-01, and Generalitat Valenciana Grant prometeo/2008/088. Paper no. TII-10-06-0127.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

The metabolic versatility of PAOs as an opportunity to obtain a highly P-enriched stream for further P-recovery

  • Acevedo Juárez, Brenda
  • Camiña, C.
  • Corona, J. E.
  • Borrás Falomir, Luis
  • Barat, Ramón|||0000-0003-0484-3614
The effects of two sequencing batch reactor operation strategies for phosphorus stream enrichment over the biological phosphorus removal performance have been studied. The objective of both strategies is of performing an extraction cycle in order to obtain a new stream highly enriched with phosphorus. In the 1st strategy the amount of influent volatile fatty acids (VFAs) is the same in each cycle; while in the 2nd strategy the influent VFAs concentration is increased during phosphorus extraction experiments. Despite the strong decrease of the stored poly-P inside the cells in both strategies after the recovery cycles, the ability of the systems to remove phosphorus was not affected. The P-release/HAcuptake ratio (changing from 0.73 to 0.21 mmol P mmol C-1) together with FISH analyses (around 85% of Accumulibacter through the experimental period) confirmed that a shift from PAM to GAM occurred after phosphorus enrichment in the 2nd strategy experiments. These results suggest that energy required for VFA uptake by polyphosphate-accumulating organisms (PAO5) was not only derived from polyphosphates degradation, but also from glycogen degradation. FISH also revealed that Type II Accumulibacter species are responsible of the metabolic shift. The strategy based on increasing influent VFAs concentration during phosphorus extraction experiments showed a higher extraction efficiency (from 46% to 76%), as higher phosphorus concentration within supernatant can be achieved (from 113.9 to 198.7 mg Pl(-1)). Following this strategy, it is possible to concentrate up to 81% of the incoming phosphorus in a single enriched stream. This suggests that, despite the extra addition of carbon source needed (9%), this strategy is more appropriate if phosphorus recovery for reuse purposes is required. (C) 2015 Elsevier BM. All rights reserved., This research work has been supported by the Generalitat Valenciana (GVPRE/2008/044) and the Polytechnic University of Valencia (PAID-06-08-3227), which are gratefully acknowledged. Special acknowledgements to Consejo Nacional de la Ciencia y la Tecnologia de Mexico (CONACYT) No. 207966.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Nondestructive assessment of freshness in packaged sliced chicken breasts using SW-NIR spectroscopy

  • Grau Meló, Raúl|||0000-0002-0540-5539
  • Sánchez Salmerón, Antonio José|||0000-0003-1896-5356
  • Girón Hernández, Lunier Joel
  • Ivorra, Eugenio|||0000-0001-6062-2061
  • Fuentes López, Ana|||0000-0002-4144-2396
  • Barat Baviera, José Manuel|||0000-0001-8487-7114
A technique was developed to predict the freshness of packaged sliced chicken breast employing a nondestructive visible and short-wavelength near-infrared (SW-NIR) spectroscopy method. Spectra were recorded at 0, 7 and 14days using a camera, spectral filter (400-1000nm) and a halogen flood lighting system which were developed and calibrated for the purpose. Physicochemical, biochemical and microbiological properties such as moisture (x w), water activity (a w), pH, total volatile basic nitrogen (TVB-N), ATP breakdown compounds (K 1 values) and mesophilic bacteria (cfu g -1) were determined to predict freshness degradation. The spectra obtained were related to the storage time of the samples. The best wavelengths for modeling freshness were 413, 426, 449, 460, 473, 480, 499, 638, 942, 946, 967, 970 and 982nm. A linear correlation was found between the visible and SW-NIR spectroscopy and parameters such as microbiological counts, K 1 and T-VBN indexes. © 2010 Elsevier Ltd., We wish to thank the Polytechnic University of Valencia and Generalitat Valenciana for the financial support they provided through the PAID-06-08-3251 and GVPRE/2008/170 Projects, respectively.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

La red social como ejemplo de participación: casos y cuestiones

  • Ramón Fernández, Francisca|||0000-0002-0936-8229
La utilización cada vez más frecuente de la Web. 2.0, permitiendo el intercambio de contenidos, así como la participación por parte de los usuarios plantea diferentes cuestiones. Si realizamos un estudio de la red social como instrumento de participación y lo aplicamos a un sector, por ejemplo, los medios de comunicación, nos damos cuenta de que se aumenta la información, pero también se fracciona la misma, ya que se produce una selección de los contenidos. Diferentes casos de estudio se darán cita en nuestra reflexión., Este trabajo ha sido desarrollado en el marco del Proyecto de Investigación Fundamental no orientada, VI Plan Nacional, Ministerio de Ciencia e Innovación. Subprograma de Proyectos de Investigación Fundamental no orientada. Título: ―Las libertades informativas en el contexto de la web 2.0 y las redes sociales: redefinición, garantías y límites‖. Referencia: DER2009-14519-C05-01 (SUBPROGRAMA JURI), Proyecto de Investigación financiado por el Vicerrectorado de Investigación de la UPV. Convocatoria del Programa de Apoyo a la Investigación y Desarrollo de la UPV para Primeros Proyectos de Investigación (PAID-06-08-2431); y Proyecto de I+D+I de la Generalitat Valenciana para grupos de investigación emergentes 2009. Referencia: GV/2009/020.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Determination of background levels and pollution assessment for seven metals (Cd, Cu, Ni, Pb, Zn, Fe, Mn) in sediments of a Mediterranean coastal lagoon

  • Hernández Crespo, Carmen|||0000-0002-6727-0481
  • Martín Monerris, Miguel|||0000-0001-7464-9505
The determination of background levels of trace metals in soils and sediments is a key point for the proper assessment of pollution degree. This study demonstrates the suitability of integrating geological and statistical methods for the reliable determination of background levels, applying it to the sediments of Lake Albufera, a wetland of international importance that is highly eutrophic. The procedure followed includes sampling of sediment cores at different points of the lake, including reference sites, and the subsequent statistical analysis of the data, comprising descriptive statistics, probabilistic plots and modal analysis. The final proposal of background levels considers the data subset separated by the statistical analysis and the spatial and age characteristics of sediments, proving the usefulness of jointly using geological and statistical methods. The upper limits of the background populations, de- fined as the mean + 2σ and expressed in mg/kg, are Cd (0.38), Cu (28.8), Ni (25.9), Pb (25.5), Zn (88.6), Fe (2.2%) and Mn (345.7). Background levels proposed for different parts of Spain, found in an extensive literature review, are also provided in this article. Once determined the background levels, the assessment of pollution degree of sediments using pollution indexes indicates that the top 25 to 30 cm of sediments has a pollution level between moderate and severe in the peripheral sites, which are nearest to the pathways of contamination, and that the north zone of the lake is the most polluted by the group of the five metals, including Cd, Cu, Ni, Pb and Zn. © 2015 Elsevier B.V. All rights reserved., The authors gratefully acknowledge the partial funding by the Support Programme for Research and Development, first research projects (PAID-06-08-3155) at the Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Salicylic acid and gentisic acid induce RNA silencing-related genes and plant resistance to RNA pathogens

  • Campos Beneyto, Laura|||0000-0002-5426-5966
  • Tarraga Herrero, Susana
  • López-Gresa, María Pilar|||0000-0001-9251-0160
  • Conejero Tomás, Vicente
  • Belles Albert, José Mª|||0000-0003-0362-9616
  • Rodrigo Bravo, Ismael|||0000-0002-8994-6112
  • Lisón, Purificación|||0000-0002-1662-8084
  • Granell Albert, Pablo
[EN] We have observed that treatments with salicylic acid (SA) or gentisic acid (GA) induced resistance to RNA pathogens such as ToMV and CEVd in tomato and Gynura auriantiaca, respectively. Accumulation of SA and GA has been found to occur in plants infected by these pathogens, thus pointing out a possible defence role of both molecules. To study the molecular basis of the observed induced resistance to RNA pathogens the induction of silencing-related genes by SA and GA was considered. For that purpose, we searched for tomato genes which were orthologous to those described in Arabidopsis thaliana, such as AtDCL1, AtDCL2, AtDCL4, AtRDR1, AtRDR2 and AtRDR6, and we tracked their induction in tomato along virus and viroid infections. We observed that CEVd significantly induced all these genes in tomato, with the exception of ToRDR6, being the induction of ToDCL4 the most outstanding. Regarding the ToMV asymptomatic infection, with the exception of ToRDR2, we observed a significant induction of all the indicated silencing-related genes, being ToDCL2 the most induced gene. Subsequently, we analyzed their transcriptional activation by SA and at the time when ToMV was inoculated on plants. ToDCL2, ToRDR1 and ToRDR2 were significantly induced by both SA and GA, whereas ToDCL1 was only induced by SA. Such an induction resulted more effective by SA treatment, which is in agreement with the stronger SAinduced resistance observed. Our results suggest that the observed delay in the RNA pathogen accumulation could be due to the pre-induction of RNA silencing-related genes by SA or GA. 2014 Elsevier Masson SAS. All rights reserved, The authors are grateful to Cristina Torres and Asuncion Sauri for technical support. This work was supported by Grant BFU2009-11958 from Direccion General de Programas y Transferencia de Conocimiento, from Spanish Ministry of Science and Innovation, and Grants PAID-06-08-3295 and SP20120576 from Universitat Politecnica de Valencia (UPV). Laura Campos was the recipient of a predoctoral fellowship ACIF/2010/231 from Generalitat Valenciana (Spain). M<SUP>a</SUP> Pilar Lopez Gresa held a postdoctoral fellowship JAE-Doc_08_00402 from the Consejo Superior de Investigaciones Cientificas (Spain).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A More Realistic RTP/RTCP-Based Simulation Platform for Video Streaming QoS Evaluation

  • Boronat, Fernando|||0000-0001-5525-3441
  • Vidal-Gimeno, Vicente-Emilio|||0000-0002-2384-7015
  • Montagud Aguar, Mario
[EN] Over the last few years, the demand for real-time multimedia services has been growing progressively so that video streaming applications are expected to be dominant in future communications systems, and most of them using RTP/RTCP protocols. This paper presents an evolved tool-set for video streaming QoS evaluation in simulated environments using such protocols. We have designed a new NS-2 module with a full RTP/RTCP implementation (following strictly the RFC 3550) and we propose to combine it with additional multimedia tools to obtain an advanced simulation framework that allows the measurement of network-level QoS metrics (such as throughput, delay, jitter or loss rate) in simulation time. Besides, as the transmitted video files can be reconstructed and played out at the receiver side, the measurement of the quality of the delivered video streams, by employing the most common objective quality metrics (such as PSNR, SSIM or VQM) or subjective metrics (MOS), is also supported. By using this tool-set, researchers and practitioners can assess their novel designs (such as network protocols, routing strategies or video coding mechanisms) for such applications in heterogeneous scenarios over different network conditions. As RTCP feedback capabilities have been added, source based control techniques (such as rate adaptability or Multiple Description Coding) could be included and tested using this more realistic and powerful simulation platform., This work has been financed, partially, by Polytechnics University of Valencia (UPV), under its R&D Support Program in PAID-06-08-002-585 Project and in PAID-01-10, and by Generalitat Valenciana, under its R&D Support Program in GV 2010/009 Project.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

La ruta de los Sagrados Corporales de Llutxent (Valencia) como una nueva expresión del turismo religioso en España, The Route of the Sacred Corporals of Llutxent (Valencia) as a new expression of religious tourism in Spain

  • Lorenzo Prats, Lourdes
  • Ramón Fernández, Francisca|||0000-0002-0936-8229
[EN] The aim of this study was to contribute to the knowledge of a festivity that honors de Mystery of the Sacred Corporals that took place in Llutxent. Therefore, an investigation that traces the Miracle from its beginning was made. Also, a reference is made to the experience of the six pilgrims which during the last 3 years made with some indication of their experience as well of characteristic of the route in order to incentive other to participate of this practice and keep history alive., [ES] El objetivo principal de la realización de este estudio es contribuir al desarrollo del conocimiento de la fiesta en honor al Santísimo Misterio de los Corporales ocurrido en Llutxent, España. Para ello se ha considerado oportuno realizar una investigación sobre el Milagro desde sus orígenes hasta la actualidad con la finalidad de potenciar una ruta que rememore la inicial que se realizó y que fue el origen del Milagro. De igual modo, se reflejará la experiencia de los seis peregrinos que durante los últimos tres años han realizado la ruta y se indican características generales del recorrido intentando así animar cada vez más a realizar dicha experiencia única que hace mantener la historia viva., Este estudio se enmarca en el seno de la Universidad Politécnica de Valencia (España), a través del soporte proporcionado por el Proyecto de I+D+I de la Generalitat Valenciana para grupos de investigación emergentes 2009 (GV/2009/020) y el Proyecto de Investigación financiado por el Vicerrectorado de Investigación de la UPV. Convocatoria del Programa de Apoyo a la Investigación y Desarrollo de la UPV para Primeros Proyectos de Investigación: (PAID-06-08-2431) realizados durante el periodo 2008-2010 relativas a estudios de investigación relacionados con el ámbito de la Comunidad Valenciana y su repercusión.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Metamaterial acoustics on the (2+ 1)D Einstein cylinder

  • Tung, Michael Ming-Sha|||0000-0002-8760-0927
[EN] The Einstein cylinder is the first cosmological model for our universe in modern history. Its geometry not only describes a static universe-a universe being invariant under time reversal-but it is also the prototype for a maximally symmetric spacetime with constant positive curvature. As such, it is still of crucial importance in numerous areas of physics and engineering, offering a fruitful playground for simulations and new theories. Here, we focus on the implementation and simulation of acoustic wave propagation on the Einstein cylinder. Engineering such an extraordinary device is the territory of metamaterial science, and we will propose an appropriate tuning of the relevant acoustic parameters in such a way as to mimic the geometric properties of this spacetime in acoustic space. Moreover, for probing such a space, we derive the corresponding wave equation from a variational principle for the underlying curved spacetime manifold and examine some of its solutions. In particular, fully analytical results are obtained for concentric wave propagation. We present predictions for this case and thereby investigate the most significant features of this spacetime. Finally, we produce simulation results for a more sophisticated test model which can only be tackled numerically., This work has been supported by the Spanish Ministerio de Economia y Competitividad, the European Regional Development Fund (ERDF) under grant TIN2017-89314-P, and the Programa de Apoyo a la Investigacion y Desarrollo 2018 (PAID-06-18) of the Universitat Politecnica de Valencia under grant SP20180016.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Interpolation subspaces of L^1 of a vector measure and norminequalities for the integration operator

  • Calabuig, J. M.|||0000-0001-8398-8664
  • Sánchez Pérez, Enrique Alfonso|||0000-0001-8854-3154
  • Rodríguez Ruiz, José
[EN] Let m be a Banach space valued measure. We study some domination properties of the integration operator that are equivalent to the existence of Banach ideals of L1(m) that are interpolation spaces. These domination properties are closely connected with some interpolated versions of summing operators, like (p, è)-absolutely continuous operators., J.M. Calabuig was supported by Ministerio de Ciencia e Innovacion (project MTM2008-04594) and Generalitat Valenciana (project GV/2009/102). J. Rodriguez was supported by Ministerio de Ciencia e Innovacion (project MTM2008-05396) and Fundacion Seneca (project 08848/PI/08). E.A. Sanchez-Perez was supported by Ministerio de Ciencia e Innovacion (project MTM2009-14483-C02-02). The authors were also supported by Universidad Politecnica de Valencia (project PAID-06-08-3093).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Graph generation to statically represent CSP processes

  • Llorens Agost, María Luisa|||0000-0002-2790-0055
  • Oliver Villarroya, Javier|||0000-0002-1169-1260
  • Silva, Josep|||0000-0001-5096-0008
  • Tamarit Muñoz, Salvador
The CSP language allows the specification and verification of complex concurrent systems. Many analyses for CSP exist that have been successfully applied in different industrial projects. However, the cost of the analyses performed is usually very high, and sometimes prohibitive, due to the complexity imposed by the non-deterministic execution order of processes and to the restrictions imposed on this order by synchronizations. In this work, we define a data structure that allows us to statically simplify a specification before the analyses. This simplification can drastically reduce the time needed by many CSP analyses. We also introduce an algorithm able to automatically generate this data structure from a CSP specification. The algorithm has been proved correct and its implementation for the CSP's animator ProB is publicly available. © 2011 Springer-Verlag., This work has been partially supported by the Spanish Ministerio de Ciencia e Innovación under grant TIN2008-06622-C03-02, by the Generalitat Valenciana under grant ACOMP/2010/042, and by the Universidad Politécnica de Valencia (Program PAID-06-08). Salvador Tamarit was partially supported by the Spanish MICINN under FPI grant BES-2009-015019.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

New insights in the metabolic behaviour of PAO under negligible poly-P reserves

  • Acevedo Juárez, Brenda
  • Murgui Mezquita, Mónica
  • Borrás Falomir, Luis
  • Barat, Ramón|||0000-0003-0484-3614
[EN] In a previous study the authors confirmed the ability of PAOs to perform GAO metabolism in short-term experiments. However, what happens when PAOs are exposed to poly-P shortage for an extended period of time? The answer to this question was the aim of this work from a macroscopic and microscopic point of view. Therefore, the poly-P was removed from a PAO enriched SBR and maintained without poly-P during five solid retention time. The PAOs were found to quickly change their metabolism to a clear GAO performance and remained without GAO colonization for the entire experimental period, even though GAO was present (around 5%) at the beginning of the experiment. Unlike the results obtained in the short-term experiments, in this case PAO Type I performed the GAO metabolism at the end of the experimental period. (C) 2016 Elsevier B.V. All rights reserved., This research work has been supported by the Generalitat Valenciana (GVPRE/2008/044) and the Polytechnic University of Valencia (PAID-06-08-3227), which are gratefully acknowledged. Special acknowledgements to the Consejo Nacional de Ciencia y Tecnologia de Mexico (CONACYT) No. 207966.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Monitoring and forecasting nitrate concentration in the groundwater using statistical process control and time series analysis: a case study

  • García-Díaz, J. Carlos|||0000-0002-5559-7110
Contaminated water resources have important implications on health and the environment. Nitrate contamination of the groundwater is a serious problem in the European Union. A method based on the statistical process control (SPC) and time series analysis is developed to monitoring and to predict the concentration evolution of nitrate (NO 3 -) in groundwater. In many pumping wells the NO 3 -concentration ([NO 3 -]) increases and approaches or even passes the European Community standard of 50 mg l -1. The objective of this paper is to show the application of statistical process control as a monitoring tool for groundwater pollution from agricultural practices. We propose the autoregressive integrated moving average (ARIMA) model as a management tool to monitoring and reduction of the intrusion of nitrate into the groundwater. This tool should help in setting up useful guidelines for evaluating actual environmental performance against the firm's environmental objectives and targets and regulatory requirements. We concluded that the statistical process control method may be a potentially important way of monitoring groundwater quality that also permits rapid response to serious increases in pollutants concentrations. In doing so, the paper fills an important gap in the water pollution standards and emerging polices (Water Framework directives). © 2010 Springer-Verlag., The author is grateful to the anonymous referees and the editor for several constructive comments that have improved this paper. The author acknowledge the financial support of Programa de Apoyo a la Investigacion y Desarrollo (PAID-06-08) of the Universidad Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A vocabulary on Program slicing Based Techniques

  • Silva, Josep|||0000-0001-5096-0008
This article surveys previous work on program slicing-based techniques. For each technique, we describe its features, its main applications, and a common example of slicing using such a technique. After discussing each technique separately, all of them are compared in order to clarify and establish the relations between them. This comparison gives rise to a classification of techniques which can help to guide future research directions in this field. © 2012 ACM., This work has been partially supported by the Spanish Ministerio de Ciencia e Innovacion under grant TIN2008-066220C03-02, by the Generalitat Valenciana under grant ACOMP/2010/042, and by the Universidad Politecnica de Valencia (Program PAID-06-08).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Electrochemical recovery of zinc from the spent pickling solutions coming from hot dip galvanizing industries. Galvanostatic operation

  • Carrillo Abad, Jordi
  • García Gabaldón, Montserrat|||0000-0003-4254-6733
  • Pérez-Herranz, Valentín|||0000-0002-4010-0888
[EN] The performance of an electrochemical reactor for zinc recovery from the spent pickling solutions coming from the hot dip galvanizing industry in galvanostatic operation is studied in this paper. These solutions mainly contain ZnCl 2 and FeCl 2 in aqueous HCl media. The effect of the applied current on the figures of merit (fractional conversion, current efficiency, space-time yield and specific energy consumption) of the electrochemical reactor is analyzed and compared with the values obtained in the potentiostatic operation. The applied current was selected in order to obtain similar electrode potential values to those applied in the potentiostatic operation and ranged between -150 and -700 mA. In the absence of iron in solution, as the current value was shifted towards more negative values, the space-time yield of zinc and its fractional conversion increased because of the increase in the zinc reduction rate, the electrode roughness and the hydrogen turbulence-promoting action. However, the increase in current values makes current efficiency to decrease due to the hydrogen evolution reaction (HER), which causes an increment in the specific energy consumption. The presence of iron in synthetic solutions led to a decrease in current efficiency associated with the reverse redox Fe 2+/Fe 3+ system and to the enhancement of the HER, which also induced increments in the local pH and the subsequent zinc redissolution. These adverse effects related to the presence of iron are greater in galvanostatic mode than in potentiostatic one. On the contrary, the additives present in the real spent pickling baths improve the zinc electrodeposition rate compared with the behavior of synthetic mixtures of zinc and iron solutions but the zinc redissolution is enhanced., Authors want to express their gratitude to the Universidad Politecnica de Valencia for the economical support in the project reference PAID-06-08, and to the Generalitat Valenciana for the financing of the project reference GV/2010/029.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Spectral self-imaging effect by time-domain multilevel phase modulation of a periodic pulse train

  • Caraquitena Sales, José
  • Beltrán, Marta
  • Llorente, Roberto
  • Muriel, Miguel A.
  • Martí Sendra, Javier
[EN] We propose and analyze a novel (to our knowledge) approach to implement the spectral self-imaging effect of optical frequency combs. The technique is based on time-domain multilevel phase-only modulation of a periodic optical pulse train. The method admits both infinite- and finite-duration periodic pulse sequences. We show that the fractional spectral self-imaging effect allows one to reduce by an integer factor the comb frequency spacing. Numerical simulation results support our theoretical analysis. © 2011 Optical Society of America., This work has been supported by the Generalitat Valenciana (Grant GV/2009/044), by the Vicerrectorado de Investigacion, Universidad Politecnica de Valencia (Grant PAID-06-08/3276) and by the Ministerio de Ciencia e Innovacion of Spain under Project "Plan Nacional de I+D+I TEC2007-68065-C03-02". J. Caraquitena and M. Beltran also acknowledge financial support from the Ministerio de Ciencia e Innovacion through the "Juan de la Cierva" research program and FPI Grant BES-2006-12066, respectively.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Controlling the Double Rotary Inverted Pendulum with Multiple Feedback Delays

  • Casanova Calvo, Vicente|||0000-0002-7040-4815
  • Salt Llobregat, Julián José|||0000-0002-9640-2658
  • Pizá, Ricardo|||0000-0001-8261-0045
  • Cuenca, Ángel|||0000-0003-4466-2666
[EN] The aim of this work is the development and implementation of a control structure for the double rotary inverted pendulum, suitable to be used in a Networked Control System environment. Delays are quite common in this kind of systems and, when controlling multivariable plants, it is possible that different delays are applied to the multiple inputs and outputs of them. A control structure that allows compensating individually each one of the multiple loop delays would be useful when one of these delays changes. Inverted pendulums are quite sensitive to delays and for this reason are appropriated plants to be used in these conditions. The control structure is developed modifying the control in no-delay conditions with a generalized predictor able to deal with unstable and non-minimum plants as the chosen one is. The proposed structure has been simulated and implemented to control a real double rotary inverted pendulum., This work was supported by the Spanish Ministerio de Ciencia y Tecnologa Project DPI2009-14744-C03-03, by Generalitat Valenciana Project GV/2010/018, and by Universidad Polit´ecnica de Valencia Project PAID06-08.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Tailoring the dispersion behavior of silicon nanophotonic slot waveguides

  • Mas Gómez, Sara María
  • Caraquitena Sales, José
  • Galán Conejos, José Vicente
  • Sanchis Kilders, Pablo|||0000-0003-2984-4218
  • Martí Sendra, Javier
We investigate the chromatic dispersion properties of silicon channel slot waveguides in a broad spectral region centered at similar to 1.5 mu m. The variation of the dispersion profile as a function of the slot fill factor, i.e., the ratio between the slot and waveguide widths, is analyzed. Symmetric as well as asymmetric geometries are considered. In general, two different dispersion regimes are identified. Furthermore, our analysis shows that the zero and/or the peak dispersion wavelengths can be tailored by a careful control of the geometrical waveguide parameters including the cross-sectional area, the slot fill factor, and the slot asymmetry degree. (C) 2010 Optical Society of America, This work has been supported by the Generalitat Valenciana (grant GV/2009/044), by the Vicerrectorado de Investigacion, Universidad Politecnica de Valencia (grant PAID-06-08/3276), and by the Spanish MEC (grants TEC2008-06333 and TEC2008-06380). J. Caraquitena also acknowledges financial support from the Spanish Ministerio de Ciencia e Innovacion through the "Juan de la Cierva" research program.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Electrochemical recovery of zinc from the spent pickling baths coming from the hot dip galvanizing industry. Potentiostatic operation

  • Carrillo Abad, Jorge
  • García Gabaldón, Montserrat|||0000-0003-4254-6733
  • Ortega Navarro, Emma María|||0000-0001-6902-018X
  • Pérez-Herranz, Valentín|||0000-0002-4010-0888
An electrochemical reactor was developed to recover zinc from the spent pickling solutions coming from the hot dip galvanizing industry. These solutions mainly contain ZnCl2 and FeCl2 in aqueous HCl media. The effect of the applied potential on the figures of merit (fractional conversion, current efficiency, space-time yield and specific energy consumption) of the electrochemical reactor was analysed. Voltammetric experiments were performed previously in order to select the optimum conditions to be applied in the electrolysis experiments. From the I-V curves it was inferred that bulk zinc deposition started from potential values more cathodic than -0.99 V. The hydrogen evolution reaction (HER) appeared from -0.45 V and masked the zinc cathodic peak C1, related to bulk zinc deposition, at high HCl concentrations. The presence of HCl inhibited iron deposition in synthetic samples. The additives present in the real baths, which diminish the massive hydrogen generation, allowed the observation of peak C1. The potential values to be applied in the electrolysis experiments were chosen from the voltammetric experiments and ranged between -1 V and -1.75 V. In the absence of iron in solution, as the electrode potential was shifted towards more negative values, the space-time yield of zinc and its fractional conversion increased because of the increase in the electrode roughness and the hydrogen turbulence-promoting action. Simultaneously, the specific energy consumption decreased initially due to the increase in the zinc conversion rate but decreased for the most cathodic potential value due to HER. The presence of iron in synthetic solutions led to a decrease in current efficiency associated with the reverse redox Fe 2+/Fe3+ system and to the enhancement of the HER, which also induced increments in the local pH and the subsequent zinc redissolution for the most cathodic potential values. On the contrary, the additives present in the real spent pickling baths avoided the adverse effects of iron, and zinc electrodeposition was possible even at high cathodic potential values. In fact, a potential value of -1.75 V was selected as the optimum since the conversion, the current efficiency and the space time yield obtained in the real baths were relatively high., Authors want to express their gratitude to the Universidad Politecnica de Valencia for the economical support in the project reference PAID-06-08, and to the Generalitat Valenciana for the financing of the project reference GV/2010/029.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Examples of fuzzy metrics and applications

  • Gregori Gregori, Valentín|||0000-0002-5983-6182
  • Morillas, Samuel|||0000-0001-9262-6139
  • Sapena Piera, Almanzor|||0000-0001-8473-6063
In this paper we present new examples of fuzzy metrics in the sense of George and Veeramani. The examples have been classified attending to their construction and most of the well-known fuzzy metrics are particular cases of those given here. In particular, novel fuzzy metrics, by means of fuzzy and classical metrics and certain special types of functions, are introduced. We also give an extension theorem for two fuzzy metrics that agree in its nonempty intersection. Finally, we give an application of this type of fuzzy metrics to color image processing. We propose a fuzzy metric that simultaneously takes into account two different distance criteria between color image pixels and we use this fuzzy metric to filter noisy images, obtaining promising results. This application is also illustrative of how fuzzy metrics can be used in other engineering problems., The authors acknowledge the support of the Spanish Ministry of Science and Innovation under Grant MTM2009-12872-C02-01 and Universidad Politenica de Valencia under Grant PAID-06-08 Primeros Proyectos de Investigacion del Vicerrectorado de Investigacion.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Study of liver and gut alterations in sea bream, Sparus aurata L., fed a mixture of vegetable protein concentrates

  • Baeza Ariño, Rosa
  • Nogales Mérida, Silvia
  • Martínez-Llorens, Silvia|||0000-0002-9824-3267
  • Jover Cerda, Miguel|||0000-0001-9049-0573
  • Tomas-Vidal, A.|||0000-0002-2985-9324
[EN] This study evaluated liver and gut alterations of gilthead sea bream, Sparus aurata L., fed diets in which 12 fish meal was substituted by a mixture (M) of pea protein concentrate (PPC) and rice protein concentrate 13 (RPC). Histological studies were conducted to evaluate the possible changes produced by four 14 experimental isolipidic (18%) and isoproteic (48%CP) diets with 30, 60 and 90% of fish meal substitution 15 by a pea and rice mixture and compared with a control diet (0%). 16 The results obtained in the present histological study showed significant changes especially in the case of 17 the 90% substitution in parameters such as thickness of the layers, goblet cells and villi measurements. 18 Structural integrity of the gut would not be significantly affected by a diet of up to 60% substitution. The 19 alterations observed in the liver could not only be attributed to diet but also to possible individual variations., This study was supported by the Universitat Politecnica de Valencia (UPV PAID-06-08).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Application of edible coatings to partially dehydrated pineapple for use in fruit cereal products

  • Talens Oliag, Pau|||0000-0001-7318-3336
  • Vargas, Maria|||0000-0001-6024-0952
  • Chiralt, Amparo|||0000-0003-1134-8144
  • Pérez-Masià, Rocío
  • Fabra Rovira, María José
[EN] The present work analyzes the application method and the effectiveness of edible coatings based on caseinates or chitosan in partially dehydrated pineapple for its use in dry fruit-cereal products. Commercial breakfast cereals and partially dehydrated pineapples prepared by osmotic dehydration and vacuum impregnation were used for the experiments. Four coating application techniques, working at atmospheric pressure or applying vacuum impregnation, were used for coating the pineapple samples. Coated and uncoated samples were stored, at 20 degrees C with breakfast cereals and were subsequently analyzed weekly during 6 months. Critical water activity and critical water content for the glass transition of the cereals at 20 degrees C were estimated as 0.60 and 9.1 g water/100 g of product, respectively. Results show that the application of coatings by vacuum impregnation and sample air drying after coating, considerably extends the shelf-life of the pineapple-cereal system when caseinate based coatings are used. Chitosan based coatings are less effective to limit water vapor transfer and the critical moisture content of cereals are reached during the storage period. (c) 2012 Elsevier Ltd. All rights reserved., The authors acknowledge the financial support from the Conselleria de Educacion de la Comunidad Valenciana through Project GVPRE/2008/355 and Universitat Politecnica de Valencia through Project PAID-06-08-3242 M.J. Fabra thanks the support of Campus de Excelencia Internacional from Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Preliminary Study using Visible and SW-NIR Analysis for Evaluating the Loss of Freshness in Commercially Packaged Cooked Ham and Turkey Ham

  • Girón Hernández, Lunier Joel
  • Ivorra, Eugenio|||0000-0001-6062-2061
  • Sánchez Salmerón, Antonio José|||0000-0003-1896-5356
  • Fernández Segovia, Isabel|||0000-0002-7641-2680
  • Barat Baviera, José Manuel|||0000-0001-8487-7114
  • Grau Meló, Raúl|||0000-0002-0540-5539
[EN] A non-destructive Vis-NIR spectroscopy (400–1000 nm) method was developed to evaluate the loss of freshness of sliced and commercially packaged cooked ham and turkey ham without any sample manipulation. The spectra were recorded at 0, 30, 40, and 60 days using a camera, spectral filter (400–1000 nm) and a halogen floodlighting system which had been were developed and calibrated for the purpose. Physico-chemical, biochemical, and microbiological properties such as pH, total volatile basic nitrogen (TVB-N), ATP breakdown compounds, and colony-forming units were determined to predict the degradation of freshness. The image spectra obtained from visible and SW-NIR spectroscopy were related to the storage time of the samples. A PLS-DA model was developed independently for packaged or unpackaged samples using the second derivative of the spectra. Mean R2 prediction obtained for cooked ham was 0.915 and 0.949 for Turkey ham. The technique developed could be applied to monitoring the freshness of commercial packed cooked ham and turkey ham as a non-destructive technique. Further studies will be needed to check the spectra obtained from samples of different commercial brands in order to evaluate more precisely the efficiency of the method., Supported by the Polytechnic University of Valencia and Generalitat Valenciana, Projects No. PAID-06-08-3251 and GVPRE/2008/170.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A multi-criteria approach for managing inter-enterprise collaborative relationships

  • Verdecho Sáez, María José|||0000-0002-1510-3956
  • Alfaro Saiz, Juan José|||0000-0003-2587-6853
  • Rodríguez Rodríguez, Raúl|||0000-0001-5133-7023
  • Ortiz Bas, Ángel|||0000-0001-5690-0807
Collaboration amongst enterprises is a common strategy used to increase competitiveness. Thus, enterprises that are collaborating need to define and use performance measurement/management frameworks composed of performance elements (objectives, performance indicators, etc.) that facilitate the management of their activity, as well as monitor their strategy and processes. There are many factors, e.g. trust, interoperability of Information Systems, etc. that need to be managed properly in order to support collaborative success. However, such factors and performance are not usually managed together. Furthermore, these factors and performance elements are interrelated but these influences are commonly overlooked. This paper aims to present an approach based on the Analytic Network Process (ANP) to manage collaborative relationships under an integrated approach by considering not only the inter-enterprise performance elements, but also the factors that influence collaboration. The approach is then applied to a collaborative enterprise network belonging to the renewable energy sector. With this innovative approach, enterprises will obtain significant information for the decision-making process, regarding which are the factors and performance elements that have the greatest impact on their competitiveness, and therefore should be prioritized., This work has been developed within the framework of a research project partially funded by the Polytechnic University of Valencia, titled "Design and Implementation of Performance Measurement Systems within Collaborative Contexts for aiding the Decision-making Process", reference PAID-06-08-3206.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Diagnosis of Intermittent Faults in IGBTs Using the Latent Nestling Method with Hybrid Coloured Petri Nets

  • Rodríguez Urrego, Leonardo
  • García Moreno, Emilio
  • Piza, Ricardo
  • Quiles Cucarella, Eduardo|||0000-0003-0578-4716
  • Correcher Salvador, Antonio|||0000-0002-2443-9857
  • Morant Anglada, Francisco José|||0000-0002-5735-6345
This paper presents a fault diagnosis application of the Latent Nestling Method to IGBTs. The paper extends the Latent Nestling Method based in Coloured Petri Nets (CPNs) to hybrid systems in such a manner that IGBTs performance can be modeled. CPNs allow for an enhanced capability for synthesis and modeling in contrast to the classical phenomena of combinational state explosion when Finite State Machine methods are applied. We present an IGBT model with different fault modes including those of intermittent nature that can be used advantageously as predictive symptoms within a predictive maintenance strategy. Ageing stress tests have been experimentally applied to the IGBTs modules and intermittent faults are diagnosed as precursors of permanent failures. In addition, ageing is validated with morphological analysis (Scanning Electron Microscopy) and semiqualitative analysis (Energy Dispersive Spectrometry)., This work was supported by the Spanish Ministerio de Ciencia y Tecnologia Project DPI2009-14744-C03-03, by Generalitat Valenciana Project GV/2010/018, and by Universitat Politecnica de Valencia Project PAID06-08.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Accuracy of tree geometric parameters depending on the LiDAR data density

  • Hadás, Edyta
  • Estornell Cremades, Javier|||0000-0003-0854-5358
[EN] The aim of this study was to compare geometric parameters of olive trees (tree height, crown base height, crown diameters, crown area), using LiDAR data of different densities: 0.5, 3.5 and 9 points m(-2). Two strategies were proposed and verified with a focus on raster and raw data analysis. Statistical tests have shown, that for the tree height and crown base height estimation, the choice of strategy was irrelevant, but denser LiDAR data provided more accurate results. The raster analysis strategy applied for sparse and dense LiDAR datasets allowed crown shape to be determined with a similar accuracy which means raster data are useful for estimating other indirect tree parameters. The quality of results was independent from the tree size., The authors appreciate the financial support provided by the Vice-Rectorate for Research of the Universitat Politecnica de Valencia [Grant PAID-06-12-3297; SP20120534].
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Influence of extraction methods on proteins and carbohydrates analysis from MBR activated sludge flocs in view of improving EPS determination

  • Zuriaga Agusti, Elena|||0000-0002-5383-1313
  • Bes-Piá, M.A.|||0000-0001-8005-7450
  • Mendoza Roca, José Antonio
  • Alonso Molina, José Luís|||0000-0002-2079-910X
One of the main operational problems in membrane bioreactors (MBRs) is membrane fouling. It can be stated that extracellular polymeric substances (EPSs) analysis is of paramount importance for membrane fouling prediction and subsequently to enhance the performance of the MBR process. In this way, the standardization of EPS separation and their analytical procedures is a non-solved problem that plays an important role in order to be able of comparing data of pilot and full-scale bioreactors. Prior to unveil this fact, it is necessary to assure the accuracy of the analyzed data. In this paper, the Standard Addition Method (SAM) is applied with the aim of studying eventual interferences by other mixed liquor substances or by reagents used in the extraction procedures on the analytical methods for determining proteins and carbohydrates and as a consequence, to improve the data accuracy and reliability. For that, several extraction protocols were applied and compared in order to obtain the EPS from the activated sludge. Moreover, DNA was measured and viability tests were carried out to evaluate cell lysis extent. BCA and Lowry methods were used to quantify proteins, meanwhile Dubois and Anthrone were applied for carbohydrates. Results showed that Triton X-100 achieved the highest extraction values in terms of proteins (81.64 ± 12.9 mg BSA/g VSS) and carbohydrates (10.3 ± 1.4 mg Glucose/g VSS) concentrations linked to lower DNA values (4.9 ± 0.8 mg DNA/g VSS). In addition, epifluorescence microscope images showed the high extent of the extraction achieved. For this protocol, BCA and Dubois analytical methods were chosen since SAM found out interferences with Anthrone and Lowry, and consequently, they were recommended for data comparison in MBR plants, and for fouling prediction., This research was supported by Universitat Politecnica de Valencia PAID 3260 and Generalitat Valenciana GV/2009/017 and Spanish Ministry of Economy and Competitiveness (Grant No. CTQ2011-29231-C05-02).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

La carta de nupcias o capitulaciones matrimoniales en el Derecho civil valenciano

  • Ramón Fernández, Francisca|||0000-0002-0936-8229
[ES] Se trata de estudiar la figura de la carta de nupcias o capitulaciones matrimoniales en la Ley 10/2007, de 20 de marzo, de la Generalitat, de Régimen Económico Matrimonial Valenciano, recientemente modificada por Ley 8/2009, de 4 de noviembre. Se atiende a la capacidad para otorgarlas, así como el contenido de las mismas, el momento de su otorgamiento, los requisitos formales, y la ineficacia y nulidad, así como los derechos concedidos por terceros en la carta de nupcias o capitulaciones matrimoniales. Dicha regulación constituye uno de los primeros pasos de la recuperación del Derecho civil foral valenciano tras la reforma del Estatuto de Autonomía de la Comunitat Valenciana (España), Trabajo realizado en el marco de los Proyectos de Investigación de la Universidad Politécnica de Valencia “El Derecho civil foral valenciano en el nuevo marco normativo actual y su influencia socio-económica” (PAID-06-08- 2431), y de la Generalitat Valenciana “El Derecho agrario valenciano y su aplicación a la empresa familiar agroalimentaria: aspectos jurídicos y económicos” (GV/2009/020).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Prioritization and management of inter-enterprise collaborative performance

  • Verdecho Sáez, María José|||0000-0002-1510-3956
  • Alfaro Saiz, Juan José|||0000-0003-2587-6853
  • Rodríguez Rodríguez, Raúl|||0000-0001-5133-7023
Collaboration among enterprises has gained attention in the business environment as a means to remain competitive. Enterprises that are collaborating look for improving their performance but, in real assessments, they often do not establish efficient frameworks to structure and manage the enterprise association/inter-enterprise performance. This paper provides a methodology based on the Analytic Network Process (ANP) to prioritize and manage, within a performance management framework, inter-enterprise performance. In addition, this approach allows managing the evolution of the performance status by introducing a model for aggregating actual performance data so that decision makers can evaluate the status of the collaborative relationship and analyze the degree of achievement of the strategy. With this innovative approach, enterprises will obtain significant information for the decision-making process regarding which are the inter-enterprise performance elements that generate a higher impact and, therefore, should be prioritized for improving the enterprise competitiveness. This approach has been applied to a collaborative enterprise network belonging to the renewable energy sector in Spain where managers of the network have validated the results obtained as well as the benefits of the approach in supporting the decision making process. © 2012 Elsevier B.V. All rights reserved., This work has been developed within the framework of a research project partially funded by the Polytechnic University of Valencia, titled "Design and Implementation of Performance Measurement Systems within Collaborative Contexts for aiding the Decision-making Process", reference PAID-06-08-3206.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Metabolic shift of polyphosphate-accumulating organisms with different levels of polyphosphate storage

  • Acevedo, B.
  • Oehmen, A.
  • Carvalho, G.
  • Seco, A.
  • Borras, L.
  • Barat, Ramón|||0000-0003-0484-3614
Previous studies have shown that polyphosphate-accumulating organisms (PAOs) are able to behave as glycogen-accumulating organisms (GAOs) under different conditions. In this study we investigated the behavior of a culture enriched with Accumulibacter at different levels of polyphosphate (poly-P) storage. The results of stoichiometric ratios Gly degraded/HAc uptake, PHB synthesized/HAc uptake, PHV synthesized/HAc uptake and P release/HAc uptake confirmed a metabolic shift from PAO metabolism to GAO metabolism: PAOs with high poly-P content used the poly-P to obtain adenosine tri-phosphate (ATP), and glycogen (Gly) to obtain nicotinamide adenine dinucleotide (NADH) and some ATP. In a test where poly-P depletion was imposed on the culture, all the acetate (HAc) added in each cycle was transformed into polyhydroxyalkanoate (PHA) despite the decrease of poly-P inside the cells. This led to an increase of the Gly degraded/HAc uptake ratio that resulted from a shift towards the glycolytic pathway in order to compensate for the lack of ATP formed from poly-P hydrolysis. The shift from PAO to GAO metabolism was also reflected in the change in the PHA composition as the poly-P availability decreased, suggesting that polyhydroxyvalerate (PHV) is obtained due to the consumption of excess reducing equivalents to balance the internal NADH, similarly to GAO metabolism. Fluorescence in situ hybridization analysis showed a significant PAO population change from Type I to Type II Accumulibacter as the poly-P availability decreased in short term experiments. This work suggests that poly-P storage levels and GAO-like metabolism are important factors affecting the competition between different PAO Types in enhanced biological phosphorus removal systems. © 2012 Elsevier Ltd., This research work has been supported by the Generalitat Valenciana (GVPRE/2008/044) and the Polytechnic University of Valencia (PAID-06-08-3227), which are gratefully acknowledged. Special acknowledgements to Consejo Nacional de la Ciencia y la Tecnologia de Mexico (CONACYT) No. 207966 and the Fundacao para a Ciencia e Tecnologia for PEst-C/EQB/LA0006/2011, PEst-OE/EQB/LA0004/2011 and SFRH/BPD/30800/2006.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Adaptive marginal median filter for colour images

  • Morillas, Samuel|||0000-0001-9262-6139
  • Gregori Gregori, Valentín|||0000-0002-5983-6182
  • Sapena Piera, Almanzor|||0000-0001-8473-6063
[EN] This paper describes a new filter for impulse noise reduction in colour images which is aimed at improving the noise reduction capability of the classical vector median filter. The filter is inspired by the application of a vector marginal median filtering process over a selected group of pixels in each filtering window. This selection, which is based on the vector median, along with the application of the marginal median operation constitutes an adaptive process that leads to a more robust filter design. Also, the proposed method is able to process colour images without introducing colour artifacts. Experimental results show that the images filtered with the proposed method contain less noisy pixels than those obtained through the vector median filter. © 2011 by the authors; licensee MDPI, Basel, Switzerland., The authors acknowledge the support of Spanish Ministry of Science and Innovation under Grant MTM2009-12872-C02-01, and Universidad Politecnica de Valencia under grant PAID-06-08.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Spaces of p-integrable functions with respect to a vector measure defined on a delta-ring

  • Calabuig, J. M.|||0000-0001-8398-8664
  • Sánchez Pérez, Enrique Alfonso|||0000-0001-8854-3154
  • Juan Blanco, María Aránzazu
[EN] The lattice properties of the Banach lattices Lp(m) and Lpw(m) of p-integrable real-valued functions and weakly p-integrable real-valued functions with respect to a vector measure m defined on a delta-ring are studied. The relation between these two spaces, the study of the continuity and some kind of compactness properties of certain multiplication operators between different spaces Lp and/or Lqw and the representation theorems of general Banach lattices via these spaces play a fundamental role., J.M. Calabuig and M.A. Juan were supported by Ministerio de Ciencia e Innovaci´on (Spain) (project MTM2008-04594) and Generalitat Valenciana (project GV/2009/102). E.A. S´anchezP´erez was supported by Ministerio de Ciencia e Innovaci´on (Spain) (project MTM2009-14483- C02-02). The three authors were also supported by Universidad Polit´ecnica de Valencia (project PAID-06-08-3093).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Modelling the metabolic shift of polyphosphate-accumulating organisms

  • Acevedo Juárez, Brenda
  • Borrás Falomir, Luis
  • Oehmen, Adrian
  • Barat, Ramón|||0000-0003-0484-3614
Enhanced biological phosphorus removal (EBPR) is one of the most important methods of phosphorus removal in municipal wastewater treatment plants, having been described by different modelling approaches. In this process, the PAOs (polyphosphate accumulating organisms) and GAOs (glycogen accumulating organisms) compete for volatile fatty acids uptake under anaerobic conditions. Recent studies have revealed that the metabolic pathways used by PAOs in order to obtain the energy and the reducing power needed for polyhydroxyalkanoates synthesis could change depending on the amount of polyphosphate stored in the cells. The model presented in this paper extends beyond previously developed metabolic models by including the ability of PAO to change their metabolic pathways according to the content of poly-P available. The processes of the PAO metabolic model were adapted to new formulations enabling the change from P-driven VFA uptake to glycogen-driven VFA uptake using the same process equations. The stoichiometric parameters were changed from a typical PAO coefficient to a typical GAO coefficient depending on the internal poly-P with Monod-type expressions. The model was calibrated and validated with seven experiments under different internal poly-P concentrations, showing the ability to correctly represent the PAO metabolic shift at low poly-P concentrations. The sensitivity and error analysis showed that the model is robust and has the ability to describe satisfactorily the change from one metabolic pathway to the other one, thereby encompassing a wider range of process conditions found in EBPR plants. © 2014 Elsevier Ltd. All rights reserved., This research work has been supported by the Generalitat Valenciana (GVPRE/2008/044) and the Polytechnic University of Valencia (PAID-06-08-3227), which are gratefully acknowledged. Special acknowledgements to Consejo Nacional de la Ciencia y la Tecnologia de Mexico (CONACYT) No. 207966. Fundacao para a Ciencia e Tecnologia, Portugal is acknowledged through projects PTDC/AAC-AMB/120581/2010 and PEst-C/EQB/LA0006/2013.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

The relativistic harmonic oscillator in a uniform gravitational field

  • Tung, Michael Ming-Sha|||0000-0002-8760-0927
[EN] We present the relativistic generalization of the classical harmonic oscillator suspended within a uniform gravitational field measured by an observer in a laboratory in which the suspension point of the spring is fixed. The starting point of this analysis is a variational approach based on the Euler-Lagrange formalism. Due to the conceptual differences of mass in the framework of special relativity compared with the classical model, the correct treatment of the relativistic gravitational potential requires special attention. It is proved that the corresponding relativistic equation of motion has unique periodic solutions. Some approximate analytical results including the next-to-leading-order term in the non-relativistic limit are also examined. The discussion is rounded up with a numerical simulation of the full relativistic results in the case of a strong gravity field. Finally, the dynamics of the model is further explored by investigating phase space and its quantitative relativistic features., This work has been supported by the Spanish Ministerio de Economia y Competitividad, the European Regional Development Fund (ERDF) under grant TIN2017-89314-P, and the Programa de Apoyo a la Investigacion y Desarrollo 2018 (PAID-06-18) of the Universitat Politecnica de Valencia under grant SP20180016.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Seasonal Variation and Soil Texture-Related Thinning Effects on Soil Microbial and Enzymatic Properties in a Semi-Arid Pine Forest

  • Lull, Cristina|||0000-0001-9270-2365
  • Lidón, Antonio|||0000-0002-0455-4348
  • Gil-Ortiz, Ricardo
  • Bautista, Inmaculada
[EN] Thinning is a practice that reduces competition for available soil resources, thereby promoting vegetation growth and affecting soil, which is involved in important ecosystem processes. Soil quality is directly influenced by various aspects such as ground cover, regional climate, and local microclimate, which can further be modified by forest thinning. In this study, the effect of tree thinning and climate on microbiological and enzymatic soil properties was investigated in an Aleppo pine (Pinus halepensis M.) forest more than a decade after silvicultural treatments. The treatments included were clear-felling (100% of mean basal area (BA) removed), moderate thinning (60% BA removed), and control (no thinning). Soil organic carbon (SOC), water-soluble organic carbon (WSOC), basal soil respiration (BSR), microbial biomass carbon (MBC), soil enzymes (beta-glucosidase, acid phosphatase, urease, and dehydrogenase), general soil characteristics, soil temperature and humidity, and precipitation were compared seasonally for over two years by analysis of variance and multivariate analysis. Results showed that the effect of 60% thinning improved soil microbial and enzymatic soil properties with variable results, mainly depending on soil organic matter content and soil texture. SOC, WSOC, and MBC were highly correlated with BSR and enzymatic activities. The main reason for the observed differences was water availability, despite a large seasonal variation. In conclusion, microbial activity was strongly affected by soil characteristics and climate, which in turn were influenced by the silvicultural treatments applied. Moderate thinning can be used as a useful practice to improve soil quality in the Mediterranean area., This research was funded by Universitat Politecnica de Valencia, project number PAID-06-08-3226, and the APC was funded by C.L. and R.G.-O.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Mid-Term Effects of Forest Thinning on N Mineralization in a Semi-Arid Aleppo Pine Forest

  • Bautista, Inmaculada
  • Lado-Monserrat, Luis
  • Lull, Cristina|||0000-0001-9270-2365
  • Lidón, Antonio|||0000-0002-0455-4348
[EN] In order to assess the sustainability of silvicultural treatments in semiarid forests, it is necessary to know how they affect the nutrient dynamics in the forest. The objective of this paper is to study the effects of silvicultural treatments on the net N mineralization and the available mineral N content in the soil after 13 years following forest clearings. The treatments were carried out following a randomized block design, with four treatments and two blocks. The distance between the two blocks was less than 3 km; they were located in Chelva (CH) and Tuéjar (TU) in Valencia, Spain. Within each block, four experimental clearing treatments were carried out in 1998: T0 control; and T60, T75 and T100 where 60%, 75% and 100 of basal area was eliminated, respectively. Nitrogen dynamics were measured using the resin tube technique, with disturbed samples due to the high stoniness of the plots. Thirteen years after the experimental clearings, T100, T75 and T60 treatments showed a twofold increase in the net mineralization and nitrification rates with respect to T0 in both blocks (TU and CH). Within the plots, the highest mineralization was found in sites with no plant cover followed by those covered by undergrowth. These results can be explained in terms of the different litterfall qualities, which in turn are the result of the proportion of material originating from Pinus halepensis Mill. vs. more decomposable undergrowth residues, This work has been supported by a fellowship from the Generalitat Valenciana, Consellería de Educación, Formación y Empleo awarded to L. Lado-Monserrat (BFPI/2008/041). Silvicultural treatments were carried out by the Mediterranean Centre for Environmental Studies (CEAM) through programme ¿I+D en relación con la restauración de la cubierta vegetal y otros aspectos de investi-gación forestal¿ (R&D in relation to the restoration of vegetation cover and other aspects of forestry research). Dataloggers and probes were provided by the Generalitat Valenciana through Project ¿Efecto de diferentes sistemas de aclareo de masa forestal sobre la disponibilidad de agua, nutrientes y la regeneración de la masa arbórea y arbustiva en parcelas de pinar¿ (Effect of different forest thinning systems on the availability of water, nutrients and trees and understory regeneration in pine forest plots) (GV06/126)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Accurate matrix exponential computation to solve coupled differential models in engineering

  • Sastre, Jorge|||0000-0002-8612-6717
  • Ibáñez González, Jacinto Javier|||0000-0002-6912-4453
  • Defez Candel, Emilio|||0000-0002-3303-6371
  • Ruíz Martínez, Pedro Antonio|||0000-0001-9215-5437
The matrix exponential plays a fundamental role in linear systems arising in engineering, mechanics and control theory. This work presents a new scaling-squaring algorithm for matrix exponential computation. It uses forward and backward error analysis with improved bounds for normal and nonnormal matrices. Applied to the Taylor method, it has presented a lower or similar cost compared to the state-of-the-art Padé algorithms with better accuracy results in the majority of test matrices, avoiding Padé's denominator condition problems. © 2011 Elsevier Ltd., This work has been supported by Universidad Politecnica de Valencia grants PAID-05-09-4338, PAID-06-08-3307 and Spanish Ministerio de Educacion grant MTM2009-08587.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Influence of the homogenization conditions and lipid self-association on properties of sodium caseinate based films containing oleic and stearic acids

  • Fabra Rovira, María José
  • Pérez Masiá, Rocío
  • Talens Oliag, Pau|||0000-0001-7318-3336
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] The effect of the homogenization conditions of the film-forming emulsions and lipid self-association on the physical properties of sodium caseinate films containing oleic and stearic acids was studied. For this purpose, different film-forming emulsions were prepared by using different homogenization methods and were characterized as to particle size distribution and rheological properties. Likewise, mechanical, structural and optical properties and water vapour permeability (WVP) of the obtained films were also determined. While films containing stearic acid showed a laminar-like structure, oleic acid was more homogeneously dispersed in the film matrix. These differences in structure make the stearic acid films less flexible, showing more surface roughness and less gloss and transparency than films containing oleic acid. The film microstructure also affects the WVP. In this sense, for oleic acid films, water barrier efficiency increased when homogenization conditions were more intense, whereas for films containing stearic acid, the opposite effect was observed. This different behavior was attributed to the different kind of lipid self-association in the aqueous media, protein interactions and their impact on the final film microstructure. © 2010 Elsevier Ltd., The authors acknowledge the financial support from the Spanish Ministerio de Educacion y Ciencia through the project AGL2007-65503/ALI, from the Conselleria de Educacion de la Comunidad Valenciana through the Project GVPRE/2008/355 and from Vicerectorate for Research from UPV through the project PAID-06-08-3242. Author M.J. Fabra thanks the support of Campus de Excelencia Internacional from Universidad Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A new combination and change in Rank for a Moroccan hybrid in Centaurea (Asteraceae), Una nueva combinación y cambio de rango para un híbrido marroquí en Centaurea (Asteraceae).

  • Ferrer-Gallego, Pedro Pablo
  • Merle Farinós, Hugo Basilio|||0000-0002-0004-7162
  • Ferriol Molina, María|||0000-0002-6533-5720
  • Garmendia, Alfonso|||0000-0001-6837-1818
[ES] Se propone una nueva combinación y cambio de rango para el híbrido marroquí descrito como Centaurea ×subdecurrens nothosubsp. paucispina ["paucispinus"] [= C. aspera subsp. gentilii × C. seridis var. auriculata] (Asteraceae)., [EN] A new combination and change in rank for the Moroccan hybrid described as Centaurea ×subdecurrens nothosubsp. paucispina [¿paucispinus¿] [= C. aspera subsp. gentilii × C. seridis var. auriculata] (Asteraceae) are proposed.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Fault diagnosis and comparing risk for the steel coil manufacturing process using statistical models for binary data

  • Debón, A.|||0000-0002-5116-289X
  • García-Díaz, J. Carlos|||0000-0002-5559-7110
[EN] Advanced statistical models can help industry to design more economical and rational investment plans. Fault detection and diagnosis is an important problem in continuous hot dip galvanizing. Increasingly stringent quality requirements in the automotive industry also require ongoing efforts in process control to make processes more robust. Robust methods for estimating the quality of galvanized steel coils are an important tool for the comprehensive monitoring of the performance of the manufacturing process. This study applies different statistical regression models: generalized linear models, generalized additive models and classification trees to estimate the quality of galvanized steel coils on the basis of short time histories. The data, consisting of 48 galvanized steel coils, was divided into sets of conforming and nonconforming coils. Five variables were selected for monitoring the process: steel strip velocity and four bath temperatures. The present paper reports a comparative evaluation of statistical models for binary data using Receiver Operating Characteristic (ROC) curves. A ROC curve is a graph or a technique for visualizing, organizing and selecting classifiers based on their performance. The purpose of this paper is to examine their use in research to obtain the best model to predict defective steel coil probability. In relation to the work of other authors who only propose goodness of fit statistics, we should highlight one distinctive feature of the methodology presented here, which is the possibility of comparing the different models with ROC graphs which are based on model classification performance. Finally, the results are validated by bootstrap procedures., The authors are indebted to the anonymous referees whose suggestions improved the original manuscript. This work was supported by a grant from PAID-06-08 (Programa de Apoyo a la Investigacion y Desarrollo) of the Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Morphological and molecular analysis of natural hybrids between the diploid Centaurea aspera L. and the tetraploid C. seridis L. (Compositae)

  • Ferriol Molina, María|||0000-0002-6533-5720
  • Merle Farinós, Hugo Basilio|||0000-0002-0004-7162
  • Boira Tortajada, Herminio|||0000-0002-5087-5249
  • Garmendia, Alfonso
  • Ruiz, J.J.
[EN] Polyploidy and hybridisation are the basis of the evolution of Centaurea (Compositae). At the El Saler dune field (eastern Spain), the diploid Centaurea aspera ssp. stenophylla and the tetraploid C. seridis ssp. maritima form a polyploid complex in which C. x subdecurrens individuals occur. This polyploid complex was analysed morphologically and genetically, using random amplified polymorphic DNA (RAPD) and tubulin-based polymorphism (TBP) markers. Flow cytometry showed that the hybrids are triploid, which is a rare finding in Centaurea. Morphologically, in contrast to leaf characters, flowering characters clearly discriminated the three taxa. The genetic analyses confirm that C. x subdecurrens is a result of the hybridisation between Centaurea aspera ssp. stenophylla and C. seridis ssp. maritima, and suggest that backcrossing events and gene flow are very rare or absent. Although the hybrids likely represent true F1 offspring, they displayed some genetic diversity that is probably due to the combination of alleles. Genetic diversity was higher in diploid than in tetraploid individuals. This fact, and the high degree of sterility of the triploid hybrids, may reflect a cytotype minority exclusion effect. This may cause spatial segregation, which effectively takes place in the study area. Dune disturbance may lead to an overlapping of the parents' distribution areas, facilitating hybridisation., This work is posthumously dedicated to Antonio Samo Lumbreras, to whom we are very grateful for all his help. This study was sponsored by the Valencian Government (Research Project GVPRE/2008/130) and the Universitat Politecnica de Valencia (Research Project Ref. 3241).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effect of ferulic acid and alpha-tocopherol antioxidants on properties of sodium caseinate edible films

  • Fabra Rovira, María José
  • Hambleton, Alicia
  • Debeaufort, Frédéric
  • Talens Oliag, Pau|||0000-0001-7318-3336
  • Chiralt, Amparo|||0000-0003-1134-8144
Edible films, based on sodium caseinate containing three different concentrations of ferulic acid or alpha-tocopherol (20, 40 and 60 mg/g sodium caseinate), were obtained in order to evaluate the effect of these compounds on properties of the caseinate matrices. Special emphasis was placed on their effect on the films' oxygen barrier properties, which are decisive in the prevention of the oxidation of foods containing lipids. Films were characterized as to their tensile, optical and surface properties as well as their barrier properties to water vapor, oxygen and aroma compounds (n-hexanal and n-hexanol). Ferulic acid was more efficient at reducing oxygen and n-hexanal permeability than alpha-tocopherol. Although ferulic acid slightly increased the stiffness of films at low concentration, in general, both antioxidants slightly reduce mechanical resistance, water vapor permeability, gloss and transparency of the films., The authors acknowledge the financial support from the Spanish Ministerio de Educacion y Ciencia through the project AGL2007-65503/ALI, from the Conselleria de Educacion de la Comunidad Valenciana through the Project GVPRE/2008/355 and from Vice-rectorate for Research from UPV through the project PAID-06-08-3242. Author M.J. Fabra thanks the support of Campus de Excelencia Internacional from Universidad Politecnica de Valencia. Author A. Hambleton thanks CONACyT of Mexico for their support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Improvement of convective drying of carrot by applying power ultrasound. Influence of mass load density

  • Carcel, J. A.|||0000-0002-3796-6146
  • Garcia-Perez, J.V.|||0000-0002-9993-4246
  • Mulet Pons, Antonio|||0000-0001-6748-2663
  • Riera, Enrique
[EN] Power ultrasound is considered to be a novel and promising technology with which to improve heat and mass transfer phenomena in drying processes. The aim of this work was to contribute to the knowledge of ultrasound application to air drying by addressing the influence of mass load density on the ultrasonically assisted air drying of carrot. Drying kinetics of carrot cubes were carried out (in triplicate) with or without power ultrasound application (75 W, 21.7 kHz) at 40 C, 1 m/s, and several mass load densities: 12, 24, 36, 42, 48, 60, 72, 84, 96, 108, and 120 kg/m3 . The experimental results showed a significant (p < 0.05) influence of both factors, mass load density and power ultrasound application, on drying kinetics. As expected, the increase of mass load density did not affect the effective moisture diffusivity (De, m2 /s) but produced a reduction of the mass transfer coefficient (k, kg water/m2 /s). This was explained by considering perturbations in the air flow through the drying chamber thus creating preferential pathways and, as a consequence, increasing external mass transfer resistance. On the other hand, it was found that the power ultrasound application increased the mass transfer coefficient and the effective moisture diffusivity regardless of the mass load density used. However, the influence of power ultrasound was not significant at the highest mass load densities tested (108 and 120 kg/m3 ), which may be explained from the high ratio (acoustic energy/sample mass) found under those experimental conditions. Therefore, the application of ultrasound was considered as a useful technology with which to improve the convective drying, although its effects may be reduced at high mass load densities., The authors acknowledge the financial support of the Spanish Ministry of Science and Technology (DPI2009-14549-C04-04) and the Universidad Politecnica de Valencia (PAID-06-08-3180).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Distribution and ecological segregation on regional and microgeographic scales of the diploid Centaurea aspera L., the tetraploid C-seridis L., and their triploid hybrids (Compositae)

  • Garmendia, Alfonso|||0000-0001-6837-1818
  • Merle Farinós, Hugo Basilio|||0000-0002-0004-7162
  • Ferriol Molina, María|||0000-0002-6533-5720
  • Ruiz -Pallardó, Pablo
[EN] Although polyploidy is considered a ubiquitous process in plants, the establishment of new polyploid species may be hindered by ecological competition with parental diploid taxa. In such cases, the adaptive processes that result in the ecological divergence of diploids and polyploids can lead to their co-existence. In contrast, non-adaptive processes can lead to the co-existence of diploids and polyploids or to differentiated distributions, particularly when the minority cytotype disadvantage effect comes into play. Although large-scale studies of cytotype distributions have been widely conducted, the segregation of sympatric cytotypes on fine scales has been poorly studied. We analysed the spatial distribution and ecological requirements of the tetraploid Centaurea seridis and the diploid Centaurea aspera in east Spain on a large scale, and also microspatially in contact zones where both species hybridise and give rise to sterile triploid hybrids. On the fine scale, the position of each Centaurea individual was recorded along with soil parameters, accompanying species cover and plant richness. On the east Spanish coast, a slight latitudinal gradient was found. Tetraploid C. seridis individuals were located northerly and diploid C. aspera individuals southerly. Tetraploids were found only in the habitats with strong anthropogenic disturbance. In disturbed locations with well-developed semi-fixed or fixed dunes, diploids and tetraploids could co-exist and hybridise. However, on a fine scale, although taxa were spatially segregated in contact zones, they were not ecologically differentiated. This finding suggests the existence of non-adaptive processes that have led to their co-existence. Triploid hybrids were closer to diploid allogamous mothers (C. aspera) than to tetraploid autogamous fathers (C. seridis). This may result in a better ability to compete for space in the tetraploid minor cytotype, which might facilitate its long-term persistence.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

The role of some antioxidants in the HPMC film properties and lipid protection in coated toasted almonds

  • Atarés Huerta, Lorena María|||0000-0002-7172-3666
  • Chiralt, Amparo|||0000-0003-1134-8144
  • Pérez Masiá, Rocío
[EN] Hydroxypropylmethylcellulose based edible films with and without antioxidant additives were characterised as to their microstructure, water vapour and oxygen permeability, mechanical behaviour, optical properties and protective ability against lipid oxidation. The corresponding film-forming dispersions were also used to coat toasted almonds in order to test their effectiveness at protecting against rancidity development. The efficiency of three additives (ascorbic acid, citric acid or ginger essential oil) was tested and compared with antioxidant-free coatings. A cross-linking effect in the film matrices containing ascorbic or citric acid was detected through the analysis of the film microstructure, mechanical behaviour and barrier properties to oxygen and water vapour. These films were the most effective protectors against oxidation of almonds, due to both their antioxidant effect and the tighter structure which leads to lower oxygen permeability. In films with ginger oil, the hydrophobic effect markedly reduced water vapour permeability at low temperatures, but protection against lipid oxidation was less effective at long storage times. © 2011 Elsevier Ltd. All rights reserved., The authors acknowledge the financial support from the Spanish Ministerio de Educacion y Ciencia through Project AGL2007-65503/ALI and from the Universidad Politecnica through Project PAID-06-08-3242. Authors also thank Manuel Planelles, Jose Luis Mova and Mercedes Tabernero from UPV Electronic Microscopy Service for their kind assistance in the use of SEM.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Study of Shrub Cover and Height Using LIDAR Data in a Mediterranean Area

  • Estornell Cremades, Javier|||0000-0003-0854-5358
  • Ruiz Fernández, Luis Ángel|||0000-0003-0073-7259
  • Velázquez Martí, Borja|||0000-0002-8157-0421
[EN] In this work we studied the height and coverage of shrub vegetation using light detection and ranging (LIDAR) data. The maximum dominant heights of vegetation were measured in the field in 83 stands of a 0.5-m radius, and the data were compared with figures for heights obtained from LIDAR data in concentric areas with different radii. The minimum root mean square error (RMSE) between the field measurements and LIDAR data was found for radii between 1.5 and 2.25 m, RMSE being 0.26 m. When the slopes are low and an accurate digital terrain model is obtained, it was shown that the radius can be reduced. Shrub heights were also studied in plots of 100 m(2). In this case, the 95th percentile of the LIDAR data included in each plot was the best predictor of height with R(2) of 0.71 and a RMSE of 0.13 m. For detecting the presence of shrub vegetation, the highest accuracy was obtained when the canopy height model and a spectral image were combined (overall accuracy of 90%). FOR. SCI. 57(3):171-179., Financial support of this study was provided by Universidad Politècnica de Valencia (PAID-06-08-3297). We thank the city hall of Chiva for their support in the field campaign.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Analysis of the factors affecting LiDAR DTM accuracy

  • Estornell Cremades, Javier|||0000-0003-0854-5358
  • Ruiz Fernández, Luis Ángel|||0000-0003-0073-7259
  • Velázquez Martí, Borja|||0000-0002-8157-0421
  • Hermosilla, T.
[EN] The creation of a quality Digital Terrain Model (DTM) is essential for representing and analyzing the Earth in a digital form. The continuous improvements in the acquisition and the potential of airborne Light Detection and Ranging (LiDAR) data are increasing the range of applications of this technique to the study of the Earth surface. The aim of this study was to determine the optimal parameters for calculating a DTM by using an iterative algorithm to select minimum elevations from LiDAR data in a steep mountain area with shrub vegetation. The parameters were: input data type, analysis window size, and height thresholds. The effects of slope, point density, and vegetation on DTM accuracy were also analyzed. The results showed that the lowest root mean square error (RMSE) was obtained with an analysis window size of 10 m, 5 m, and 2.5 m, rasterized data as input data, and height thresholds equal to or greater than 1.5 m. These parameters showed a RMSE of 0.19 m. When terrain slope varied from 0-10% to 50-60%, the RMSE increased by 0.11 m. The RMSE decreased by 0.06 m when point density was increased from 4 to 8 points/m2, and increased by 0.05 m in dense vegetation areas. © 2011 Taylor & Francis., This research has been supported by Vice-Rectorate for Research of Universidad Politecnica de Valencia (Grant PAID-06-08-3297).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Mid term variation of vertical distribution of Acid Volatile Sulphide and Simultaneously Extracted Metals in sediment cores from Lake Albufera (Valencia, Spain)

  • Hernández Crespo, Carmen|||0000-0002-6727-0481
  • Martín Monerris, Miguel|||0000-0001-7464-9505
Lake Albufera is one of the most eutrophic bodies of water in Spain due to the point and diffuse pollution over past decades and its sediments are likely to be anoxic because of the high organic matter flux. Hence, sulphides can play an important role in limiting the mobility of heavy metals. This work aimed to study the vertical variation of acid volatile sulphide (AVS) and simultaneously extracted metals (SEM) in sediment cores collected from Lake Albufera; other sediment characteristics like organic matter, biochemical oxygen demand or total metals were also studied. Three sites were selected and four sampling campaigns were carried out in order to study the spatial and temporal variation, as well as to obtain information regarding the historical variation in the composition of sediments. AVS and SEM were analysed by the purge and trap method. The vertical distribution of AVS and SEM varied depending on the sampling site, concentrations of AVS and SEM were higher at sites close to mouths of inflowing channels. A decreasing trend of AVS has been found at these sites over time: in the two first samplings, AVS increased with depth reaching maximum concentrations of 40 and 21 µmol g-1, but from then on, AVS were lower and decreased with depth. SEM decreased with depth from 3 µmol g-1 in surface layers to around 1 µmol g-1 at deeper segments at these sites. However, the central site was more uniform with depth as well as with time, presenting lower values of SEM and AVS (mean of 0.9 and 2.0 µmol g-1 respectively); there the maximum value of AVS (7 µmol g-1) was found at the top layer (0-3 cm). According to the (SEM-AVS)/fOC approach every sites, and throughout the whole cores, can be classified as non-toxic respect metals, as the values were under 130 µmol g-1., We thank three anonymous reviewers for their comments and suggestions to improve the quality of the manuscript. This study was funded by the support programme for research and development, first research projects (Grant No. PAID-06-08-3155) at the Universitat Politecnica de Valencia.