Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Antimicrobial activity of polysaccharide films containing essential oils

  • Sánchez-González, Laura
  • Cháfer, Maite
  • González-Martínez, Chelo
  • Hernández Pérez, Manuel|||0000-0003-1986-6501
  • Chiralt, Amparo|||0000-0003-1134-8144
Antimicrobial films were prepared by incorporating different concentrations of bergamot (BO), lemon (LO) and tea tree (TTO) essential oils (EO), into chitosan (CH) and hydroxypropylmethylcellulose (HPMC) films. Their antibacterial effectiveness against Listeria monocytogenes, Escherichia coli and Staphylococcus aureus was studied at 10 C during a storage period of 12 days. HPMC-EO and CH-EO composite films present a significant antimicrobial activity against the three pathogens considered. The nature and amount of the essential oils (EO), the structure of the film and the possible interactions which exist between the polymers and active constituents of EO affected the antimicrobial activity of the films. In all film matrices, TTO exhibited the highest antimicrobial activity. A complete inhibition of microbial growth was observed for CH or HPMC-TTO films for E. coli, HPMC-TTO for L. monocytogenes and HPMC-BO for S. aureus, The authors acknowledge the financial support provided by the Conselleria de Empresa, Universidad y Ciencia (Spain) for the project (GV/2007/219) and the Ministerio de Educacion y Ciencia (Project AGL2007-65503). Author L Sanchez-Gonzalez thanks the Ministerio de Educacion y Ciencia (Spain) for an FPU Grant (AP2006-026).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effect of Homogenization Conditions on Physicochemical Properties of Chitosan-Based Film-Forming Dispersions and Films

  • Vargas, Maria|||0000-0001-6024-0952
  • Chiralt, Amparo|||0000-0003-1134-8144
  • Cháfer Nácher, Maite|||0009-0009-5727-8306
  • González Martínez, María Consuelo|||0000-0001-9993-8303
  • Perdones Montero, Ángela
Film-forming dispersions (FFD) based on high molecular weight chitosan (CH) alone or in combination with oleic acid (OA) were prepared under different homogenization conditions (rotor-stator or rotor stator together with microfluidization at different pressures). Film-forming dispersions (FFD) were characterized in terms of particle size distribution, rheological properties, distribution and z-potential. In order to study the impact of the properties of the FFD on the casted films, the water vapour permeability, mechanical properties and microstructure of the dry films were evaluated. Results showed that micro- fluidization promoted significant changes in the size and surface charge of the FFD particles, which in turn had an impact on the rheological properties of the FFD. The changes were more marked with the increase in microfluidization pressure. As regards film properties, the higher the microfluidization pressure in the FFD, the lower the water vapour permeability values and the stiffer the CH-OA composite films. These results were explained by film microstructure, which was observed by SEM., The authors acknowledge the financial support provided by Universidad Politecnica de Valencia (PAID-06-09-2834), Conselleria de Empresa, Universidad y Ciencia (GV/2010/082), and Ministerio de Educacion y Ciencia (Project AGL2007-65503).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effect of hydroxypropylmethylcellulose and chitosan coatings with and without bergamot essential oil on quality and safety of cold-stored grapes

  • Sánchez González, Laura
  • Pastor Navarro, Clara|||0009-0006-9942-4322
  • Vargas, Maria|||0000-0001-6024-0952
  • Chiralt, Amparo|||0000-0003-1134-8144
  • González Martínez, María Consuelo|||0000-0001-9993-8303
  • Cháfer Nácher, Maite|||0009-0009-5727-8306
[EN] Biodegradable coatings based on hydroxypropylmethylcellulose (HPMC) or chitosan (CH) with and without bergamot essential oil were applied to table grapes, cv. Muscatel, in order to find environmentally friendly, healthy treatments with which to better preserve fresh fruit quality and safety during postharvest cold storage. Physicochemical properties (weight loss, °Brix, total phenols, antioxidant activity, colour and texture), respiration rates and microbial counts of samples were determined throughout cold storage. The coatings had a significant effect on the development of quality variables, with the additional effect of essential oil addition as a function of the polysaccharide matrix being especially notable. Although incorporation of essential oil resulted in smaller weight losses and a greater antimicrobial effect, it also led to browner samples when using CH. Chitosan coatings containing bergamot oil were more effective than pure CH and HPMC coatings at inhibiting respiration rates. All the coatings improved the mechanical resistance of the samples at the end of storage. The most recommended coating for Muscatel table grapes is CH containing bergamot oil since, despite only contributing slightly to the sample colour, this showed the highest antimicrobial activity and the greatest control of respiration rates with a reasonably good control of water loss during storage. © 2010 Elsevier B.V., The authors acknowledge the financial support provided by Ministerio de Educacion y Ciencia (Project AGL2007-65503).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Use of Essential Oils in Bioactive Edible Coatings

  • Sánchez González, Laura
  • Vargas, Maria|||0000-0001-6024-0952
  • González Martínez, María Consuelo|||0000-0001-9993-8303
  • Chiralt, Amparo|||0000-0003-1134-8144
  • Cháfer Nácher, Maite|||0009-0009-5727-8306
[EN] Antimicrobial and antioxidant properties of essential oils have previously been extensively reviewed. The mechanisms of action of essential oils have not been clearly identified but they seem to be related with their hydrophobic nature. Applying these natural compounds in the food industry could be a potential alternative, but its application costs and other problems, such as their intense aroma and potential toxicity, limit their use in the area of food preservation. An interesting strategy to reduce doses of essential oils while maintaining their effectiveness could be the incorporation of these natural compounds into edible/biodegradable films. This review discusses the use of essential oils as natural antimicrobial and antioxidant compounds to obtain bioactive films or coatings. The advantages and limitations are also reviewed. © 2010 Springer Science + Business Media, LLC., The authors acknowledge the financial support provided by Ministerio de Educacion y Ciencia (Project AGL2007-65503). Author L. Sanchez-Gonzalez thanks Ministerio de Educacion y Ciencia (Spain) for a FPU Grant (AP2006-026).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Influence of the homogenization conditions and lipid self-association on properties of sodium caseinate based films containing oleic and stearic acids

  • Fabra Rovira, María José
  • Pérez Masiá, Rocío
  • Talens Oliag, Pau|||0000-0001-7318-3336
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] The effect of the homogenization conditions of the film-forming emulsions and lipid self-association on the physical properties of sodium caseinate films containing oleic and stearic acids was studied. For this purpose, different film-forming emulsions were prepared by using different homogenization methods and were characterized as to particle size distribution and rheological properties. Likewise, mechanical, structural and optical properties and water vapour permeability (WVP) of the obtained films were also determined. While films containing stearic acid showed a laminar-like structure, oleic acid was more homogeneously dispersed in the film matrix. These differences in structure make the stearic acid films less flexible, showing more surface roughness and less gloss and transparency than films containing oleic acid. The film microstructure also affects the WVP. In this sense, for oleic acid films, water barrier efficiency increased when homogenization conditions were more intense, whereas for films containing stearic acid, the opposite effect was observed. This different behavior was attributed to the different kind of lipid self-association in the aqueous media, protein interactions and their impact on the final film microstructure. © 2010 Elsevier Ltd., The authors acknowledge the financial support from the Spanish Ministerio de Educacion y Ciencia through the project AGL2007-65503/ALI, from the Conselleria de Educacion de la Comunidad Valenciana through the Project GVPRE/2008/355 and from Vicerectorate for Research from UPV through the project PAID-06-08-3242. Author M.J. Fabra thanks the support of Campus de Excelencia Internacional from Universidad Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Water interactions and microstructure of chitosan-methylcellulose composite films as affected by ionic concentration

  • Vargas, Maria|||0000-0001-6024-0952
  • Albors, A.|||0000-0002-7713-9401
  • Chiralt, Amparo|||0000-0003-1134-8144
  • González Martínez, María Consuelo|||0000-0001-9993-8303
[EN] Edible films based on high molecular weight chitosan (CH) and methylcellulose (MC) were obtained by mixing different ratios (0:1, 0.5:1.5, 1.0:1.0, 1.5:0.5 and 1:0) of the biopolymers in two solvent conditions (0.95 and 6.85 mmol of ions per g polymer). In order to characterize the dry films, water sorption isotherms, water vapour permeability and film microstructure were evaluated. Water vapour permeability of CH-MC composite films was significantly affected by both the CH-MC ratio and the ionic concentration in the matrix. This can be attributed to the influence of ions on polymer chain packaging during the film formation and their role in the water uptake capacity of the films which affects the water transport properties. (C) 2011 Elsevier Ltd. All rights reserved., The authors acknowledge the financial support provided by Ministerio de Educacion y Ciencia (Spain) for the Project AGL2007-65503. The authors also acknowledge the Electronic Microscopy Service of Universidad Politecnica de Valencia for their assistance in the use of SEM.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effect of ferulic acid and alpha-tocopherol antioxidants on properties of sodium caseinate edible films

  • Fabra Rovira, María José
  • Hambleton, Alicia
  • Debeaufort, Frédéric
  • Talens Oliag, Pau|||0000-0001-7318-3336
  • Chiralt, Amparo|||0000-0003-1134-8144
Edible films, based on sodium caseinate containing three different concentrations of ferulic acid or alpha-tocopherol (20, 40 and 60 mg/g sodium caseinate), were obtained in order to evaluate the effect of these compounds on properties of the caseinate matrices. Special emphasis was placed on their effect on the films' oxygen barrier properties, which are decisive in the prevention of the oxidation of foods containing lipids. Films were characterized as to their tensile, optical and surface properties as well as their barrier properties to water vapor, oxygen and aroma compounds (n-hexanal and n-hexanol). Ferulic acid was more efficient at reducing oxygen and n-hexanal permeability than alpha-tocopherol. Although ferulic acid slightly increased the stiffness of films at low concentration, in general, both antioxidants slightly reduce mechanical resistance, water vapor permeability, gloss and transparency of the films., The authors acknowledge the financial support from the Spanish Ministerio de Educacion y Ciencia through the project AGL2007-65503/ALI, from the Conselleria de Educacion de la Comunidad Valenciana through the Project GVPRE/2008/355 and from Vice-rectorate for Research from UPV through the project PAID-06-08-3242. Author M.J. Fabra thanks the support of Campus de Excelencia Internacional from Universidad Politecnica de Valencia. Author A. Hambleton thanks CONACyT of Mexico for their support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effect of essential oils on properties of film forming emulsions and films based on HPMC and chitosan

  • Sánchez González, Laura
  • Chiralt, Amparo|||0000-0003-1134-8144
  • González Martínez, María Consuelo|||0000-0001-9993-8303
  • Cháfer Nácher, Maite|||0009-0009-5727-8306
[EN] Film-forming dispersions (FFD) and films, prepared by incorporating different concentrations of bergamot (BO), lemon (LO) and tea tree (TTO) essential oils into hydroxyproplymethylcellulose (HPMC) and chitosan (CH) were obtained and their physico-chemical properties were characterised. Results showed that the increment of essential oil (EO) content promoted significant changes in the size and surface charge of the FFD particles. As regards the film properties, the higher the EO content, the lower the water vapour permeability and the moisture sorption capacity. In general, the addition of EO into the HPMC or CH matrix leads to a significant decrease in gloss, transparency, tensile strength and elastic modulus of the composite films. Discriminant analyses of obtained data revealed that the polymer type was the main factor which defined the FFD and composite film behaviour. For a given polymer, although both the nature and concentration of the EO influenced FFD behaviour, the concentration played a more important role. In film properties, the discriminant analyses did not reveal different groups associated to the different nature or concentration of the essential oils, although composite films with BO appeared to differ slightly from the rest. (C) 2011 Elsevier Ltd. All rights reserved., The authors acknowledge the financial support provided by Ministerio de Educacion y Ciencia (Project AGL2007-65503). Author L. Sanchez-Gonzalez thanks Ministerio de Educacion y Ciencia (Spain) for a FPU Grant (AP2006-026)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

The role of some antioxidants in the HPMC film properties and lipid protection in coated toasted almonds

  • Atarés Huerta, Lorena María|||0000-0002-7172-3666
  • Chiralt, Amparo|||0000-0003-1134-8144
  • Pérez Masiá, Rocío
[EN] Hydroxypropylmethylcellulose based edible films with and without antioxidant additives were characterised as to their microstructure, water vapour and oxygen permeability, mechanical behaviour, optical properties and protective ability against lipid oxidation. The corresponding film-forming dispersions were also used to coat toasted almonds in order to test their effectiveness at protecting against rancidity development. The efficiency of three additives (ascorbic acid, citric acid or ginger essential oil) was tested and compared with antioxidant-free coatings. A cross-linking effect in the film matrices containing ascorbic or citric acid was detected through the analysis of the film microstructure, mechanical behaviour and barrier properties to oxygen and water vapour. These films were the most effective protectors against oxidation of almonds, due to both their antioxidant effect and the tighter structure which leads to lower oxygen permeability. In films with ginger oil, the hydrophobic effect markedly reduced water vapour permeability at low temperatures, but protection against lipid oxidation was less effective at long storage times. © 2011 Elsevier Ltd. All rights reserved., The authors acknowledge the financial support from the Spanish Ministerio de Educacion y Ciencia through Project AGL2007-65503/ALI and from the Universidad Politecnica through Project PAID-06-08-3242. Authors also thank Manuel Planelles, Jose Luis Mova and Mercedes Tabernero from UPV Electronic Microscopy Service for their kind assistance in the use of SEM.