Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effect of Homogenization Conditions on Physicochemical Properties of Chitosan-Based Film-Forming Dispersions and Films

  • Vargas, Maria|||0000-0001-6024-0952
  • Chiralt, Amparo|||0000-0003-1134-8144
  • Cháfer Nácher, Maite|||0009-0009-5727-8306
  • González Martínez, María Consuelo|||0000-0001-9993-8303
  • Perdones Montero, Ángela
Film-forming dispersions (FFD) based on high molecular weight chitosan (CH) alone or in combination with oleic acid (OA) were prepared under different homogenization conditions (rotor-stator or rotor stator together with microfluidization at different pressures). Film-forming dispersions (FFD) were characterized in terms of particle size distribution, rheological properties, distribution and z-potential. In order to study the impact of the properties of the FFD on the casted films, the water vapour permeability, mechanical properties and microstructure of the dry films were evaluated. Results showed that micro- fluidization promoted significant changes in the size and surface charge of the FFD particles, which in turn had an impact on the rheological properties of the FFD. The changes were more marked with the increase in microfluidization pressure. As regards film properties, the higher the microfluidization pressure in the FFD, the lower the water vapour permeability values and the stiffer the CH-OA composite films. These results were explained by film microstructure, which was observed by SEM., The authors acknowledge the financial support provided by Universidad Politecnica de Valencia (PAID-06-09-2834), Conselleria de Empresa, Universidad y Ciencia (GV/2010/082), and Ministerio de Educacion y Ciencia (Project AGL2007-65503).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effect of chitosan lemon essential oil coatings on storage-keeping quality of strawberry

  • Perdones Montero, Ángela
  • Sánchez González, Laura
  • Chiralt, Amparo|||0000-0003-1134-8144
  • Vargas, Maria|||0000-0001-6024-0952
[EN] Film-forming dispersions (FFD) were prepared with 1% high molecular weight chitosan and 3% lemon essential oil and were submitted to two different homogenization treatments. The particle size and viscosity of the FFD were evaluated and stand-alone coatings were characterized in terms of water vapour permeability (WVP) and antimicrobial activity. The FFD were applied to cold-stored strawberries, cv. Camarosa, and the physicochemical properties, fungal decay and respiration rate of strawberries were determined throughout cold storage at 5 degrees C. The use of microfluidization to prepare chitosan-based FFD led to a significant reduction in the particle size and apparent viscosity of the dispersions, with no significant effect on the decrease in the WVP of the stand-alone coatings. Chitosan coatings did not show a significant effect in terms of the acidity, pH and soluble solid content of strawberries throughout storage. In contrast, coatings slowed down the respiration rate of samples when lemon essential oil was added to the FFD. Adding lemon essential oil enhanced the chitosan antifungal activity both in in vitro tests and during cold storage in strawberries inoculated with a spore suspension of Botrytis cinerea., The authors acknowledge the financial support provided by Conselleria de Empresa, Universidad y Ciencia (project GV/2010/082), Universitat Politecnica de Valencia (project PAID-06-09-2834) and Ministerio de Economia y Competitividad (project AGL2010-20694). Author A. Perdones is grateful to Universitat Politecnia de Valencia for a FPI grant.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Edible films and coatings to prevent the detrimental effect of oxygen on food quality: Possibilities and limitations

  • Bonilla Lagos, Maria Jeannine
  • Atarés Huerta, Lorena María|||0000-0002-7172-3666
  • Vargas, Maria|||0000-0001-6024-0952
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] Oxygen has a deleterious effect on the quality of a wide variety of food products. The application of edible films and coatings to food products represents a new approach to solve this problem. Edible films and coatings can include antioxidant agents in their formulation and at the same time, they represent a barrier to oxygen, which results in a better preservation of quality. The water activity of the product, as well as the ambient relative humidity, determines the antioxidant effect of films and coatings. This paper reviews the latest studies dealing with the effectiveness and application of antioxidant films and coatings.Highlights ► The deleterious effect of oxygen on food quality can be controlled with edible films and coatings containing antioxidants. ► The action of these involves the oxygen barrier effect and the specific activity of the incorporated antioxidant agents. ► The efficiency of edible films and coatings is greatly affected by the water availability in the film. ► This paper reviews the latest studies dealing with the effectiveness and application of antioxidant films and coatings., The authors acknowledge the financial support from the Spanish Ministerio de Educacion y Ciencia through Project AGL2010-20694, from Universidad Politecnica de Valencia through Project PAID-06-09-2834 and from Conselleria de Empresa, Universidad y Ciencia (Project GV/2010/082).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Properties of wheat starch film-forming dispersions and films as affected by chitosan addition

  • Bonilla Lagos, Maria Jeannine
  • Atarés Huerta, Lorena María|||0000-0002-7172-3666
  • Vargas, Maria|||0000-0001-6024-0952
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] In order to evaluate the impact of chitosan on the physical properties of wheat starch-glycerol films, part of the wheat starch was replaced by chitosan, and the effect of composition on the properties of both the films and the film-forming dispersions was studied. The latter became more stable and viscous as the chitosan proportion was increased in the mixture. Both polymers appeared to integrate homogeneously in the film matrix. The combined effect of the glycerol and chitosan proportions affected the mechanical and barrier properties of the films. The tensile strength and elastic modulus of the films were improved as chitosan ratio increased. The oxygen and water vapor permeability slightly increased in line with the amount of chitosan in the blend although the induced differences were very small. Chitosan ratio directly affected the antimicrobial properties of the films, which showed a significant bactericide activity when the chitosan-starch ratio in the film was 50%. Nevertheless, at a starch:chitosan ratio of 80:20, counts of coliforms did not exceed the initial value in the meat after 7 storage days., The authors acknowledge the financial support from Spanish Ministerio de Ciencia e Innovacion throughout the project AGL2010-20694 and Universidad Politecnica de Valencia (projects PAID-06-09-2834 and PAID-06-11-2013). Author J. Bonilla is deeply grateful to Generalitat Valenciana for a Santiago Grisolia Grant.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Physical properties of chitosan-basil essential oil edible films as affected by oil content and homogenization conditions

  • Bonilla Lagos, Maria Jeannine
  • Vargas, Maria|||0000-0001-6024-0952
  • Atarés Huerta, Lorena María|||0000-0002-7172-3666
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] This work studies the influence of basil essential oil, its content and the homogenization treatment on the physical properties of chitosan-based edible films. Two homogenization treatments were applied, without (H1) and with (H2) microfluidization (MF). Composite films were softer, less rigid and more stretchable than pure CH films. MF intensified these changes. H2 films showed microcracks due to the weak interactions between chitosan and oil, which affected their mechanical behaviour. In pure chitosan films, MF significantly increased water vapour permeability. Homogenization treatment greatly affected this property. Gloss was reduced by the essential oil addition, whereas MF tended to yield glossier films., The authors acknowledge the financial support provided by Universidad Politécnica de Valencia (PAID-06-09-2834), Conselleria de Empresa, Universidad y Ciencia (GV/2010/082), and Ministerio de Educación y Ciencia (Project AGL2010-20694).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Physicochemical properties of chitosan-essential oils film-forming dispersions. Effect of homogenization treatments

  • Bonilla Lagos, Maria Jeannine
  • Atarés Huerta, Lorena María|||0000-0002-7172-3666
  • Vargas, Maria|||0000-0001-6024-0952
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] Chitosan films enriched with basil (B) or thyme (T) essential oils (EO) were prepared by means of two homogenization treatments, without (H1) and with (H2) microfluidization. H2 treatment led to a significant decrease in the average particle size and the type of EO significantly affected d(43) values (p<0.05). zeta-potential significantly increased with the use of H2 treatment. Treatment H2 changed the rheological behaviour of the FFD. In all cases, the viscosity of the FFD was reduced by this treatment. The type of EO had a different effect on rheological behaviour depending on the homogenization treatment. CH:T were more viscous at H2 and CH:A showed higher apparent viscosity values than CH:T at H1., The authors acknowledge the financial support provided by Universidad Politécnica de Valencia (PAID-06-09-2834), Conselleria de Empresa, Universidad y Ciencia (GV/2010/082), and Ministerio de Educación y Ciencia (Project AGL2010-20694)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effect of essential oils and homogenization conditions on properties of chitosan-based films

  • Bonilla Lagos, Maria Jeannine
  • Atarés Huerta, Lorena María|||0000-0002-7172-3666
  • Vargas, Maria|||0000-0001-6024-0952
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] The influence of essential oil type (basil and thyme), its content and the homogenization treatment on the physical properties of chitosan-based film-forming dispersions and edible films was studied. Two homogenization treatments were applied, without (H1) and with (H2) microfluidization (MF) at 165 MPa. H2 emulsions showed the smallest particle size with the highest zeta-potential and the lowest viscosity. Composite films with essential oils were softer, less rigid and more stretchable than pure CH films. MF intensified these changes. H2 films showed micro-cracks due to the weakening of the polymer chain interaction forces when oils are present, which affected their mechanical behaviour. MF increased WVP of pure CH films while oil incorporation was only effective to reduce WVP when they were incorporated at the lowest ratio and when high pressure was used in the homogenization of the film-forming dispersion. Gloss was reduced by the essential oil addition, whereas MF tended to yield glossier films., The authors acknowledge the financial support from the Spanish Ministerio de Educacion y Ciencia through Project AGL2010-20694, from Universidad Politecnica de Valencia through Project PAID-06-09-2834 and from Conselleria de Empresa, Universidad y Ciencia (Project GV/2010/082). Authors also thank Manuel Planes, Jose Luis Moya and Mercedes Tabernero of the UPV Electronic Microscopy Service for their assistance in the use of the SEM.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effect of chitosan essential oil films on the storage-keeping quality of pork meat products

  • Bonilla Lagos, Maria Jeannine
  • Vargas, Maria|||0000-0001-6024-0952
  • Atarés Huerta, Lorena María|||0000-0002-7172-3666
  • Chiralt, Amparo|||0000-0003-1134-8144
Edible films based on chitosan were prepared, with and without basil or thyme essential oils, with the aim of assessing their protective ability against lipid oxidation and their antimicrobial activity. Chitosan films had good oxygenbarrier properties, which were worsened by essential oil addition, especially when the film equilibrium moisture content increased. Due to the oxygen-barrier effect, all the films effectively protected pork fat from oxidation, in comparison to unprotected samples. In spite of the worsening of the oxygen-barrier properties, the films with essential oils were more effective than those of pure chitosan, which points to the chemical action of specific antioxidant compounds of the oils. Films were effective to control microbial growth in minced pork meat, although the incorporation of essential oils did not improve their antimicrobial activity. Throughout the storage, the films led to colour changes in minced pork meat associated with the conversion of myoglobin into metmyoglobin due to the reduction of the oxygen availability., The authors acknowledge the financial support provided by the Universitat Politecnica de Valencia (PAID-06-09-2834), Generalitat Valenciana (GV/2010/082) and Ministerio de Educacion y Ciencia (AGL2010-20694). Author J. Bonilla is deeply grateful to Generalitat Valenciana for a Santiago Grisolia Grant.