Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Essential oils as additives in biodegradable films and coatings for active food packaging

  • Atarés Huerta, Lorena María|||0000-0002-7172-3666
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] Background: Petroleum derivate plastics represent a serious environmental problem, which is why alternative sustainable solutions must be found. To this aim, recent research has focused on the development of edible/biodegradable packaging for food products. The implementation of this novel packaging requires analyzing thoroughly the effect of the ingredients used on the most relevant properties of the material. Scope and approach: Essential oils represent an interesting ingredient for biodegradable food packaging, mainly due to their natural origin and their functional (antioxidant/antimicrobial) properties, allowing for obtaining active materials aiming to extend shelf-life and add value to the product. However, their inclusion in edible/biodegradable films for food packaging may imply some impact on several properties of the system (such as optical, tensile¿), affecting in turn the consumer acceptability. Before the increasing research on biodegradable materials for food packaging, and the growing interest on natural food additives, this paper aims to review the latest findings on how essential oils impact the most relevant properties of edible films and coatings, namely microstructural, physical (tensile, barrier, optical), antioxidant and antimicrobial. Key findings and conclusions: Essential oil incorporation affects the continuity of the polymer matrix, leading to physical changes depending on the specific polymer-oil components interactions. Generally, the film structure is weakened by the oil addition, whereas the water barrier properties are improved and the transparency is reduced. Essential oils may provide the films with antioxidant and/or antimicrobial properties. The oil composition and the specific interactions with the polymer determine its effectiveness as an active ingredient., The authors acknowledge the financial support from the Spanish Ministerio de Educacion y Ciencia through Project AGL2010-20694, from Universidad Politecnica de Valencia through Project PAID-06-11-2013 and from Conselleria de Empresa, Universidad y Ciencia (Project GV/2013/152).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Properties of wheat starch film-forming dispersions and films as affected by chitosan addition

  • Bonilla Lagos, Maria Jeannine
  • Atarés Huerta, Lorena María|||0000-0002-7172-3666
  • Vargas, Maria|||0000-0001-6024-0952
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] In order to evaluate the impact of chitosan on the physical properties of wheat starch-glycerol films, part of the wheat starch was replaced by chitosan, and the effect of composition on the properties of both the films and the film-forming dispersions was studied. The latter became more stable and viscous as the chitosan proportion was increased in the mixture. Both polymers appeared to integrate homogeneously in the film matrix. The combined effect of the glycerol and chitosan proportions affected the mechanical and barrier properties of the films. The tensile strength and elastic modulus of the films were improved as chitosan ratio increased. The oxygen and water vapor permeability slightly increased in line with the amount of chitosan in the blend although the induced differences were very small. Chitosan ratio directly affected the antimicrobial properties of the films, which showed a significant bactericide activity when the chitosan-starch ratio in the film was 50%. Nevertheless, at a starch:chitosan ratio of 80:20, counts of coliforms did not exceed the initial value in the meat after 7 storage days., The authors acknowledge the financial support from Spanish Ministerio de Ciencia e Innovacion throughout the project AGL2010-20694 and Universidad Politecnica de Valencia (projects PAID-06-09-2834 and PAID-06-11-2013). Author J. Bonilla is deeply grateful to Generalitat Valenciana for a Santiago Grisolia Grant.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effect of the incorporation of antimicrobial/antioxidant proteins on the properties of potato starch films

  • Moreno Marro, Olga
  • Atarés Huerta, Lorena María|||0000-0002-7172-3666
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] Glycerol plasticized potato starch films containing bioactive proteins (lactoferrin (LF) and/or lysozyme (LZ), at 0.1 and 0.2 ratio with respect to starch) were obtained by casting method and characterized as to their microstructural, thermal and physical (water content, mechanical, water and oxygen barrier, optical) properties. The bioactive properties, named antioxidant and antimicrobial, of the proteins and the films were also characterized. The incorporation of proteins affected the structural and physical properties of potato starch films, while modifying their thermal behavior and increasing the glass transition temperature. Both proteins showed a certain degree of compatibility with starch chains through the bond formations (increase in Tg), while a part is separated and migrates to the film surface. Their incorporation, especially that of lactoferrin, greatly increased the film s brittleness, regardless of the films water content, although they enhance the water vapor and oxygen barrier properties, whatever the age of the film. Protein also reduced the film s transparency and gloss, while lactoferrin induced color changes. The thermal degradation of blend films and isolated proteins occurred at temperatures of over 250 ◦C, which means that blend starch films can be thermoprocessed, according to their thermoplastic properties and following the usual practices of the plastics industries. A synergistic antimicrobial action against Escherichia coli and coliforms was observed when both LZ and LF were simultaneously applied. Both of these exhibited antioxidant capacity., The authors acknowledge the financial support provided by the Generalitat Valenciana (GV/2013/152) and Ministerio de Economia y Competividad (Projects AGL2013-42989-R) and the services rendered by the Electron Microscopy Service of the UPV. Olga Moreno Marro also thanks the Ministerio de Educacion, Cultura y Deporte for the FPU 2012-1121 grant.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Physical and bioactive properties of corn starch - buttermilk edible films

  • Moreno Marro, Olga
  • MULLER, JUSTINE
  • Gonzalez Martínez, Chelo
  • Pastor Navarro, Clara|||0009-0006-9942-4322
  • Atarés Huerta, Lorena María|||0000-0002-7172-3666
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] The effect of incorporating different ratios of both non-heated and heated (95 ºC) buttermilk (BM) to corn starch (CS) films was analyzed in terms of its structural, mechanical, barrier, optical and bioactive properties. The properties of the film forming dispersions (particle size distribution, -potential and rheological behavior) were also analyzed. As the BM increased in the blend, both the average particle size and the apparent viscosity of the film forming dispersions were reduced. The low degree of compatibility between both materials resulted in heterogeneous structures, where an interpenetrated protein phase in the starch matrix was observed as a result of the protein gelation when BM was heated. This affected the mechanical and barrier properties giving rise to more resistant and extensible, and less permeable films than in non-heated BM. Only films formulated with heated BM exhibited antioxidant activity, probably due to the release of the antioxidant peptides during thermal treatment of proteins. BM did not have any effect on the growth of Listeria innocua., The authors acknowledge the financial support provided by Universitat Politecnica de Valencia-Spain (PAID-06-11-2013), Generalitat Valenciana-Spain (GV/2013/152), and Ministerio de Educacion y Ciencia-Spain (Project AGL2010-20694). Olga Moreno Marro also thanks Ministerio de Educacion, Cultura y Deporte-Spain for a FPU grant.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Physical, structural and antimicrobial properties of poly vinyl alcohol-chitosan biodegradable films

  • Bonilla Lagos, Maria Jeannine
  • Fortunati, Elena
  • Kenny, J.M.
  • Atarés Huerta, Lorena María|||0000-0002-7172-3666
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] Chitosan (CH) was blended with poly vinyl alcohol (PVA) in different compositions to obtain biodegradable films (PVA90:CH10, PVA80:CH20, PVA70:CH30). Blends and neat polymer films (PVA100,CH100) were characterized for their thermal behavior, structural, mechanical and barrier properties as well as antimicrobial activity. Both polymers showed good compatibility, as demonstrated by FESEM images and thermal behavior. A reduction in crystallinity of the blend was observed as the chitosan content was increased. Moreover, chitosan addition strongly reduced the film stretchability while increased the film rigidity and resistance to fracture, mainly at 70:30 PVA:CH ratio. Additional advantages of chitosan incorporation to PVA films are the reduction of the UV-transmittance while providing antimicrobial properties, The authors acknowledge the financial support provided by Universidad Politecnica de Valencia (PAID-06-11-2013) and Ministerio de Educacion y Ciencia (Project AGL2010-20694). Author J. Bonilla is deeply grateful to Generalitat Valenciana for a Santiago Grisolia Grant. The authors E. Fortunati and J.M. Kenny gratefully acknowledge the financial support from the National Consortium of Materials Science and Technology (INSTM). E. F. is the recipient of the fellowship "L'Oreal Italia per le Donne e la Scienza 2012" for the project "Progettazione, sviluppo e caratterizzazione di biomateriali nanostrutturati capaci di modulare la risposta e il differenziamento delle cellule staminali".