Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Accuracy of tree geometric parameters depending on the LiDAR data density

  • Hadás, Edyta
  • Estornell Cremades, Javier|||0000-0003-0854-5358
[EN] The aim of this study was to compare geometric parameters of olive trees (tree height, crown base height, crown diameters, crown area), using LiDAR data of different densities: 0.5, 3.5 and 9 points m(-2). Two strategies were proposed and verified with a focus on raster and raw data analysis. Statistical tests have shown, that for the tree height and crown base height estimation, the choice of strategy was irrelevant, but denser LiDAR data provided more accurate results. The raster analysis strategy applied for sparse and dense LiDAR datasets allowed crown shape to be determined with a similar accuracy which means raster data are useful for estimating other indirect tree parameters. The quality of results was independent from the tree size., The authors appreciate the financial support provided by the Vice-Rectorate for Research of the Universitat Politecnica de Valencia [Grant PAID-06-12-3297; SP20120534].
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Study of Shrub Cover and Height Using LIDAR Data in a Mediterranean Area

  • Estornell Cremades, Javier|||0000-0003-0854-5358
  • Ruiz Fernández, Luis Ángel|||0000-0003-0073-7259
  • Velázquez Martí, Borja|||0000-0002-8157-0421
[EN] In this work we studied the height and coverage of shrub vegetation using light detection and ranging (LIDAR) data. The maximum dominant heights of vegetation were measured in the field in 83 stands of a 0.5-m radius, and the data were compared with figures for heights obtained from LIDAR data in concentric areas with different radii. The minimum root mean square error (RMSE) between the field measurements and LIDAR data was found for radii between 1.5 and 2.25 m, RMSE being 0.26 m. When the slopes are low and an accurate digital terrain model is obtained, it was shown that the radius can be reduced. Shrub heights were also studied in plots of 100 m(2). In this case, the 95th percentile of the LIDAR data included in each plot was the best predictor of height with R(2) of 0.71 and a RMSE of 0.13 m. For detecting the presence of shrub vegetation, the highest accuracy was obtained when the canopy height model and a spectral image were combined (overall accuracy of 90%). FOR. SCI. 57(3):171-179., Financial support of this study was provided by Universidad Politècnica de Valencia (PAID-06-08-3297). We thank the city hall of Chiva for their support in the field campaign.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Analysis of the factors affecting LiDAR DTM accuracy

  • Estornell Cremades, Javier|||0000-0003-0854-5358
  • Ruiz Fernández, Luis Ángel|||0000-0003-0073-7259
  • Velázquez Martí, Borja|||0000-0002-8157-0421
  • Hermosilla, T.
[EN] The creation of a quality Digital Terrain Model (DTM) is essential for representing and analyzing the Earth in a digital form. The continuous improvements in the acquisition and the potential of airborne Light Detection and Ranging (LiDAR) data are increasing the range of applications of this technique to the study of the Earth surface. The aim of this study was to determine the optimal parameters for calculating a DTM by using an iterative algorithm to select minimum elevations from LiDAR data in a steep mountain area with shrub vegetation. The parameters were: input data type, analysis window size, and height thresholds. The effects of slope, point density, and vegetation on DTM accuracy were also analyzed. The results showed that the lowest root mean square error (RMSE) was obtained with an analysis window size of 10 m, 5 m, and 2.5 m, rasterized data as input data, and height thresholds equal to or greater than 1.5 m. These parameters showed a RMSE of 0.19 m. When terrain slope varied from 0-10% to 50-60%, the RMSE increased by 0.11 m. The RMSE decreased by 0.06 m when point density was increased from 4 to 8 points/m2, and increased by 0.05 m in dense vegetation areas. © 2011 Taylor & Francis., This research has been supported by Vice-Rectorate for Research of Universidad Politecnica de Valencia (Grant PAID-06-08-3297).