Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Estimation of wood volume and height of olive tree plantations using airborne discrete-return LiDAR data

  • Estornell Cremades, Javier|||0000-0003-0854-5358
  • Velázquez Martí, Borja|||0000-0002-8157-0421
  • López- Cortés, I|||0000-0002-0994-1689
  • Salazar Hernández, Domingo Manuel|||0000-0003-1753-6509
  • Fernández-Sarría, Alfonso|||0000-0001-5533-7661
The aim of this study is to analyze methodologies based on airborne LiDAR (light detection and ranging) technology of low pulse density points (0.5m(-2)) for height and volume quantification of olive trees in Viver (Spain). A total of 29 circular plots, each with a radius of 20m, were sampled and their volumes and heights were obtained by dendrometric methods. For these estimations, several statistics derived from LiDAR data were calculated in each plot. Regression models were used to predict volume and height. The results showed good performance for estimating volume (R-2=0.70) and total height (R-2=0.67)., The authors appreciate the financial support provided by the Spanish Ministerio de Ciencia e Innovacion (Ministry for Science & Innovation) within the framework of the project AGL2010-15334 and by the Vice-Rectorate for Research of the Universitat Politecnica de Valencia [Grant PAID-06-12-3297; SP20120534].
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Estimation of pruning biomass of olive trees using airborne discrete-return LiDAR data

  • Estornell Cremades, Javier|||0000-0003-0854-5358
  • Ruiz Fernández, Luis Ángel|||0000-0003-0073-7259
  • Velázquez Martí, Borja|||0000-0002-8157-0421
  • López- Cortés, I|||0000-0002-0994-1689
  • Salazar Hernández, Domingo Manuel|||0000-0003-1753-6509
  • Fernández-Sarría, Alfonso|||0000-0001-5533-7661
[EN] The use of residual biomass from fruit tree pruning requires the creation of logistic schedules based on the knowledge of the amount of residues available in each plot. Remote sensing is shown as an important tool to quantify these resources. The objective of this research was to estimate the amount of pruned materials from olive trees (Olea europea L.) using dendrometric parameters obtained from field measurements and airborne LiDAR (Light Detection and Ranging) data. Pruning, mean crown diameter, stem diameter, total height and crown height were measured in the field for a set of 25 trees in Viver, Central East Spain. Airborne discrete LiDAR data were acquired and used to extract the crown area of the trees and metrics based on the height distribution of the LiDAR points. Two types of regression models to predict the amount of pruned material were computed, firstly using dendrometic measurements obtained in the field, and then based on tree metrics derived from LiDAR data. The dendrometric variables obtained from field measurements were also compared with the metrics obtained from LiDAR data. High values of R2 were obtained for the models, ranging from 0.86 to 0.89. The regression models derived from LiDAR data used the area as an explanatory variable. The results of this study show the potential of airborne LiDAR data to predict pruning residues in olive trees, The authors appreciate the financial support provided by the Vice-Rectorate for Research of the Universitat Politecnica de Valencia (Grant PAID-06-12-3297; SP20120534) and the Conselleria de Educacion, Formacion y Empleo de la Generalitat Valenciana (GV/2014/016).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Accuracy of tree geometric parameters depending on the LiDAR data density

  • Hadás, Edyta
  • Estornell Cremades, Javier|||0000-0003-0854-5358
[EN] The aim of this study was to compare geometric parameters of olive trees (tree height, crown base height, crown diameters, crown area), using LiDAR data of different densities: 0.5, 3.5 and 9 points m(-2). Two strategies were proposed and verified with a focus on raster and raw data analysis. Statistical tests have shown, that for the tree height and crown base height estimation, the choice of strategy was irrelevant, but denser LiDAR data provided more accurate results. The raster analysis strategy applied for sparse and dense LiDAR datasets allowed crown shape to be determined with a similar accuracy which means raster data are useful for estimating other indirect tree parameters. The quality of results was independent from the tree size., The authors appreciate the financial support provided by the Vice-Rectorate for Research of the Universitat Politecnica de Valencia [Grant PAID-06-12-3297; SP20120534].