Pasar al contenido principal

CUBICACION DE LA BIOMASA DE ARBOLES FRUTALES EN BASE A DENDROMETRIA ADAPTADA Y TECNOLOGIA LIDAR EN VISTAS A LA GESTION DE LAS PLANTACIONES Y APROVECHAMIENTO DE SUS RESIDUOS

AGL2010-15334

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación Fundamental no Orientada
Convocatoria Proyectos I+D
Año convocatoria 2010
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Subdirección General de Proyectos de Investigación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA
Identificador persistente http://dx.doi.org/10.13039/501100004837

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Dendrometric analysis of olive trees for wood biomass quantification in Mediterranean orchards

  • Velázquez Martí, Borja|||0000-0002-8157-0421
  • López- Cortés, I|||0000-0002-0994-1689
  • Salazar Hernández, Domingo Manuel|||0000-0003-1753-6509
This work focuses on the development of dendrometric algorithms to calculate the volume and total biomass contained in olive trees. This laid the foundation for the use of this methodology as a tool to manage resources from orchards, establishing adequate prediction models for assessing other parameters such as income from raw materials from the cultivation, fruit production, CO2 sinks, and waste materials (residual wood) used for energy or industry. Dendrometry has traditionally been applied to forest trees. However, little research has been conducted on fruit trees because of their heterogeneous structure. This issue was the first step of this research. For this, the form factors were calculated. This relates to the actual volume of the branch with a model volume, calculated as a revolution solid from the base diameter and length. The shape more approximated to 1 was the cylinder model with a mean value of 0.76 and standard deviation (SD) of 0.23. On the other hand, volume equations were obtained for the branches. The distribution of biomass in the tree was analyzed. It is estimated that 40 % of biomass is located in the stem and 60 % in the crown, and most of the crown biomass is concentrated in the first branches (60 %). Afterwards, occupation factors were calculated to relate the wood volume in the crown to its apparent volume, the mean being 0.005 dm(3)/m(3) and SD 0.0025 dm(3)/m(3). Also, equations for predicting the whole wood in the crown were obtained. In this regard, the best results were obtained when the crown diameter was used (R (2) = 0.74). These results could be correlated with the production and quality of the fruit, amount of residual biomass coming from pruning, and LIDAR data, which may indicate a simple, quick, and accurate method for predicting biomass., We are grateful to the Spanish Ministry of Science and Innovation for funding this research by means of the National Program of R+D project: AGL2010-15334.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Estimation of wood volume and height of olive tree plantations using airborne discrete-return LiDAR data

  • Estornell Cremades, Javier|||0000-0003-0854-5358
  • Velázquez Martí, Borja|||0000-0002-8157-0421
  • López- Cortés, I|||0000-0002-0994-1689
  • Salazar Hernández, Domingo Manuel|||0000-0003-1753-6509
  • Fernández-Sarría, Alfonso|||0000-0001-5533-7661
The aim of this study is to analyze methodologies based on airborne LiDAR (light detection and ranging) technology of low pulse density points (0.5m(-2)) for height and volume quantification of olive trees in Viver (Spain). A total of 29 circular plots, each with a radius of 20m, were sampled and their volumes and heights were obtained by dendrometric methods. For these estimations, several statistics derived from LiDAR data were calculated in each plot. Regression models were used to predict volume and height. The results showed good performance for estimating volume (R-2=0.70) and total height (R-2=0.67)., The authors appreciate the financial support provided by the Spanish Ministerio de Ciencia e Innovacion (Ministry for Science & Innovation) within the framework of the project AGL2010-15334 and by the Vice-Rectorate for Research of the Universitat Politecnica de Valencia [Grant PAID-06-12-3297; SP20120534].
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Different methodologies for calculating crown volume of Platanus hispanica trees by terrestial laser scanner and comparison with classical dendrometric measurements

  • Fernández-Sarría, Alfonso|||0000-0001-5533-7661
  • Velázquez Martí, Borja|||0000-0002-8157-0421
  • Estornell Cremades, Javier|||0000-0003-0854-5358
  • Recio Recio, Jorge Abel|||0000-0003-2159-7494
  • Martínez, Lucía
  • Sajdak, Magdalena
Terrestrial laser scanners (TLSs) are used in forestry and fruit culture applications to perform a threedimensional geometrical characterization of trees and so make it easier to develop management systems based on that information. In addition, this data can improve the accuracy of dendrometric variable estimations, such as crown volume, obtained by standard methods. The main objective of this paper is to compare classical methods for crown volume estimation with the volumes obtained from the processing of point clouds obtained using a terrestrial laser scanner (TLS) on urban Platanus hispanica trees. This will allow faster quantification of residual biomass from pruning and therefore an improved management in future. The methods applied using TLS data were also evaluated in terms of processing speed. A set of 30 specimens were selected and their main dendrometric parameters (such as diameter breast height, crown diameter, total height, and distance from the crown base to the soil) were manually measured using classical methods. From these dendrometric parameters, the apparent crown volumes were calculated using three geometric models: cone, hemisphere, and paraboloid. Simultaneously, these trees were scanned with a Leica ScanStation2. A laser point cloud was registered for each tree and processed to obtain the crown volumes. Four processing methods were analyzed: (a) convex hull (an irregular polyhedral surface formed by triangles that surround the crown) applied to the whole point cloud that forms the crown; (b) convex hull using slices of 10 cm in height from the top to the base of the crown; (c) XY triangulation in horizontal sections; and (d) voxel discretization. All the obtained volumes (derived from classical methods and TLS) were assessed and compared. The regression equations that compare the volumes obtained by dendrometry and those derived from TLS data showed coefficients of determination (R2) greater than 0.78. The highest R2 (0.89) was obtained in the comparison between the volume calculated using a paraboloid and flat sections, which was also the fastest method. These results show the potential of TLS for predicting the crown volumes of urban trees, such as P. hispanica, to help improve their management, especially the quantification of residual biomass., The authors appreciate the financial support provided by the Spanish Ministry of Science and Innovation in the framework of the Project AGL2010-15334 and by the Generalitat Valenciana in the framework of the Project GV/2012/003.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Calculation of biomass volume of citrus trees from an adapted dendrometry

  • Velázquez Martí, Borja|||0000-0002-8157-0421
  • Estornell Cremades, Javier|||0000-0003-0854-5358
  • López- Cortés, I|||0000-0002-0994-1689
  • Marti-Gavila, Jesus|||0000-0001-9948-1331
A methodology and computational algorithms, to calculate volumes and the total biomass contained in citrus trees from an adapted dendrometry were developed. The methodology could be used as a tool to manage resources from the orchards, establishing adequate predictive models for assessing parameters such as income from raw materials for the cultivation, fruit production, CO2 sink, and waste materials (i.e. residual wood) used for energy or industry. Dendrometry has been traditionally applied to forest trees. However, little research has been conducted on fruit trees due to their heterogeneous structure. To develop the process of biomass quantification it was necessary to perform systems of measurement, enabling to determine volumes of the analysed trees. Firstly, form factors and volume functions for the branches were calculated. These volume functions gave 0.97 coefficient of determination from base diameter and length. The relationships between apparent crown volume and actual volume in the crown (i.e. no hollows) of the trees were established, with 0.80 coefficient of determination. Occupation factor and the distribution of biomass in the crown strata were evaluated. These results could be correlated with production and quality of the fruit, with the amount of residual biomass coming from pruning, and with LIDAR data what may produce a simple, quick and accurate way to predict biomass., This research were developed by the project AGL2010-15334 funded by the Ministry of Science and Innovation of Spain funds.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A hybrid genetic algorithm for route optimization in the bale collecting problem

  • Gracia Calandin, Carlos Pablo|||0000-0002-8589-2452
  • Diezma Iglesias, Belén
  • Barreiro Elorza, Pilar
The bale collecting problem (BCP) appears after harvest operations in grain and other crops. Its solution defines the sequence of collecting bales which lie scattered over the field. Current technology on navigation-aid systems or auto-steering for agricultural vehicles and machines, is able to provide accurate data to make a reliable bale collecting planning. This paper presents a hybrid genetic algorithm (HGA) approach to address the BCP pursuing resource optimization such as minimizing non-productive time, fuel consumption, or distance travelled. The algorithmic route generation provides the basis for a navigation tool dedicated to loaders and bale wagons. The approach is experimentally tested on a set of instances similar to those found in real situations. In particular, comparative results show an average improving of a 16% from those obtained by previous heuristics., This work was supported in part by the Spanish Government (research project AGL2010-15334).