Pasar al contenido principal

CONTROL BASADO EN EVENTOS DE SISTEMAS DISTRIBUIDOS Y COLABORATIVOS

DPI2012-31303

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación Fundamental no Orientada
Convocatoria Proyectos I+D
Año convocatoria 2012
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Secretaría de Estado de Investigación, Desarrollo e Innovación
Centro beneficiario UNIVERSIDAD NACIONAL DE EDUCACION A DISTANCIA
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

Docta Complutense
Publicación Artículo científico (JournalArticle)

Robust switched control of an air levitation system with minimum sensing

  • Chaos, D.
  • Chacón Sombría, Jesús
  • Aranda Escolástico, E.
  • Dormido, S.
This work studies the control problem of an air levitation system with limited sensing capabilities. We propose a simple but considerably robust switched controller. We prove that the output of the system is globally uniformly ultimately bounded with a bound as small as we desire and we show through simulations and real experiments the robustness of the controller in the presence of disturbances, model uncertainties and parameter tuning.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A Multirate Control Strategy to the Slow Sensors Problem: An Interactive Simulation Tool for Controller Assisted Design

  • Salt Llobregat, Julián José|||0000-0002-9640-2658
  • Cuenca, Ángel|||0000-0003-4466-2666
  • Palau, Francisco
  • Dormido, Sebastian
[EN] In many control applications, the sensor technology used for the measurement of the variable to be controlled is not able to maintain a restricted sampling period. In this context, the assumption of regular and uniform sampling pattern is questionable. Moreover, if the control action updating can be faster than the output measurement frequency in order to fulfill the proposed closed loop behavior, the solution is usually a multirate controller. There are some known aspects to be careful of when a multirate system (MR) is going to be designed. The proper multiplicity between input-output sampling periods, the proper controller structure, the existence of ripples and others issues need to be considered. A useful way to save time and achieve good results is to have an assisted computer design tool. An interactive simulation tool to deal with MR seems to be the right solution. In this paper this kind of simulation application is presented. It allows an easy understanding of the performance degrading or improvement when changing the multirate sampling pattern parameters. The tool was developed using Sysquake, a Matlab-like language with fast execution and powerful graphic facilities. It can be delivered as an executable. In the paper a detailed explanation of MR treatment is also included and the design of four different MR controllers with flexible structure to be adapted to different schemes will also be presented. The Smith's predictor in these MR schemes is also explained, justified and used when time delays appear. Finally some interesting observations achieved using this interactive tool are included., This work was supported in part by the Spanish Ministry of Economy and Competitiveness under Project DPI2012-31303. The authors J. Salt, A. Cuenca, are grateful to Grant TEC2012-31506, from the Spanish Ministry of Education. The work of A. Cuenca was supported in part by the Spanish Ministerio de Economia under Grant DPI2011-28507-C02-01.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Optimal Control for Aperiodic Dual-Rate Systems With Time-Varying Delays

  • Aranda-Escolástico, E.
  • Guinaldo, M.
  • CHACON, JESUS
  • DORMIDO, SEBASTIÁN
  • Salt Llobregat, Julián José|||0000-0002-9640-2658
[EN] In this work, we consider a dual-rate scenario with slow input and fast output. Our objective is the maximization of the decay rate of the system through the suitable choice of the n-input signals between two measures (periodic sampling) and their times of application. The optimization algorithm is extended for time-varying delays in order to make possible its implementation in networked control systems. We provide experimental results in an air levitation system to verify the validity of the algorithm in a real plant., This work was supported in part by the Spanish Ministry of Economy and Competitiveness (MINECO) under the Projects DPI2012-31303 and DPI2014-55932-C2-2-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Control en red basado en eventos: de lo centralizado a lo distribuido, Event-based control for networked systems: From centralized to distributed approaches

  • Guinaldo, María
  • Sánchez, José
  • Dormido, Sebastián
[ES] Los sistemas de control en red (SCR) son aquellos en los que los diferentes elementos de un lazo de control (sensores, actuadores y controladores) se encuentran espacialmente distribuidos y la transmisión entre ellos tiene lugar a travón de informaciés de un canal de comunicación o red. La reducción de la cantidad de información transmitida juega un papel importante en el desempeño de estos sitemas, y reglas de comunicación no convencionales como el control basado en eventos, se han demostrado efectivas. En este artículo se revisan algunas de estas estrategias, centrándose en primer lugar en los SCR centralizados, para posteriormente estudiar esquemas de control distribuido, aplicados a sistemas de gran escala. Finalmente, algunos de los resultados teóricos se aplican al control de formaciones en un sistema de experimentación real., [EN] Networked control systems (NCSs) are spatially distributed systems in which sensors, actuators and controllers exchange information through a communication channel or network. The reduction in the amount of transmitted information has a relevant impact over the system’s performance. In this regard, non-conventional communication rules, such as the event-based control, have been demonstrated to be effective. In this paper, some of these strategies are reviewed. We first focus on centralized NCSs, and then the distributed control for large-scale systems is studied. Finally, some of the results are applied to the formation control problem and implemented over an experimental setup., Este trabajo ha sido financiado por el Ministerio de Economía y Competitividad bajo los proyectos DPI2012-31303 y DPI2014-55932-C2-2-R, y por la UNED a través del proyecto 2014-007-UNED-PROY.
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

An Interactive and comprehensive software tool to promote active learning in the Loop Shaping Control System design

  • Díaz, José Manuel
  • Costa Castelló, Ramon|||0000-0003-2553-5901
  • Muñoz, R
  • Dormido Bencomo, Sebastián
The classical loop shaping is a design procedure that explicitly involves the shaping of the open loop transfer function L(s), within a desired frequency spectrum by manipulating the poles, zeros, and gain of the controller C(s). Interactive software tools have proven as, particularly, useful techniques with high impact on control education. This kind of interactive tools has demonstrated in the past that students learn in a much more active way. This paper presents the basic functionality of the linear control system design (LCSD), an interactive tool for analysis and design of linear control systems with special emphasis on the classical loop shaping design. The software tool is implemented in Sysquake, a MATLAB-like language with fast execution and excellent facilities for interactive graphics, and is delivered as a stand-alone executable that is readily accessible to students and instructors. Several design problems are used to illustrate the main features of the LCSD tool to perform classical loop shaping.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

An Interactive and comprehensive software tool to promote active learning in the Loop Shaping Control System design

  • Díaz, José Manuel
  • Costa Castelló, Ramon
  • Muñoz, R
  • Dormido Bencomo, Sebastián
The classical loop shaping is a design procedure that explicitly involves the shaping of the open loop transfer function L(s), within a desired frequency spectrum by manipulating the poles, zeros, and gain of the controller C(s). Interactive software tools have proven as, particularly, useful techniques with high impact on control education. This kind of interactive tools has demonstrated in the past that students learn in a much more active way. This paper presents the basic functionality of the linear control system design (LCSD), an interactive tool for analysis and design of linear control systems with special emphasis on the classical loop shaping design. The software tool is implemented in Sysquake, a MATLAB-like language with fast execution and excellent facilities for interactive graphics, and is delivered as a stand-alone executable that is readily accessible to students and instructors. Several design problems are used to illustrate the main features of the LCSD tool to perform classical loop shaping., Postprint (published version)
Docta Complutense
Publicación Artículo científico (JournalArticle)

Optimal control for aperiodic dual-rate systems with time-varying delays

  • Aranda Escolástico, E.
  • Salt, J.
  • Guinaldo, M.
  • Chacón Sombría, Jesús
  • Dormido, S.
In this work, we consider a dual-rate scenario with slow input and fast output. Our objective is the maximization of the decay rate of the system through the suitable choice of the n-input signals between two measures (periodic sampling) and their times of application. The optimization algorithm is extended for time-varying delays in order to make possible its implementation in networked control systems. We provide experimental results in an air levitation system to verify the validity of the algorithm in a real plant.