Pasar al contenido principal

DESARROLLO DE CONTROLADORES BASADOS EN MISIONES

DPI2011-28507-C02-01

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación Fundamental no Orientada
Convocatoria Proyectos I+D
Año convocatoria 2011
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Subdirección General de Proyectos de Investigación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA
Identificador persistente http://dx.doi.org/10.13039/501100004837

Resultados relacionados

Resultados totales (Incluyendo duplicados): 29
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Industrial Robot Programming and UPnP Services Orchestration for the Automation of Factories

  • Valera Fernández, Ángel|||0000-0001-6843-6394
  • Sánchez Salmerón, Antonio José|||0000-0003-1896-5356
  • Ricolfe Viala, Carlos|||0000-0002-2980-4569
  • Zotovic Stanisic, Ranko|||0000-0002-4746-2101
  • Vallés Miquel, Marina|||0000-0002-6396-0098
  • Gómez Moreno, Javier
The integration of equipment and other devices built into industrial robot cells with modern Ethernet interface technologies and low‐cost mass produced devices (such as vision systems, laser scanners, force torque‐sensors, PLCs and PDAs etc.) enables integrators to offer more powerful and smarter solutions. Nevertheless, the programming of all these devices efficiently requires very specific knowledge about them, such as their hardware architectures and specific programming languages as well as details about the system¿s low level communication protocols. To address these issues, this paper describes and analyses the Plug‐and‐Play architecture. This is one of the most interesting service‐oriented architectures (SOAs) available, which exhibits characteristics that are well adapted to industrial robotics cells. To validate their programming features and applicability, a test bed was specially designed. This provides a new graphical service orchestration which was implemented using Workflow Foundation 4 of .NET. The obtained results allowed us to verify that the use of integration schemes based on SOAs reduces the system integration time and is better adapted to industrial robotic cell system integrators., The authors wish to express their gratitude to the Plan Nacional de I+D (FEDER-CICYT, Spanish Government) and to the Universitat Politecnica de Valencia (Spain) for the financing of this work, which was made under the research projects DPI2010-20814-C02-02, DPI2011-28507-C02-01 and PAID/2011/039. In addition, they also want to acknowledge the assistance of Elena Ruiz Gomez for her help in the translation of the article.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Performance and Results of the Triple Buffering Built-In in a Raspberry PI to Optimize the Distribution of Information from a Smart Sensor

  • Jiménez García, José Luis
  • Baselga Masiá, David
  • Poza-Lujan, Jose-Luis|||0000-0003-2450-9920
  • Posadas-Yagüe, Juan-Luis|||0000-0002-5017-8689
  • Simó Ten, José Enrique|||0000-0003-4677-7627
Currently, 3D sensors can be considered an evolution of cameras by providing the image with its depth information. These sensors have a generic function and the programmer has to process the received information in order to be adapted and used in a specific environment. In robots navigation, the 3D information can be useful for basic behaviours such as obstacles avoidance or even more complex behaviours such as maps generation . In this article an image management system provided by the xTion intelligent sensor is presented. The xTion sensor provides a VGA image and a 3D depth, which allows it to be used for several purposes. In order to distribute the data, it is acquired, processed and sent to several clients with a triple buffer system modified to serve the most recent image to the client. The system is programmed in C for Linux and built-in in a Raspberry PI. The article exposes the performance and results from monitoring the frame's delay comparing it with a simple and a double buffer system widely used in this kind of systems., Coordinated project COBAMI: Mission-based Hierarchical Control. Education and Science Department, Spanish Government. CICYT: MICINN: DPI2011-28507-C02-01/02 and project “Real time distributed control systems” of the Support Program for Research and Development 2012 UPV (PAID-06-12).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Hybrid force/position control for a 3-DOF 1T2R parallel robot: Implementation, simulations and experiments

  • Cazalilla, J.
  • Vallés Miquel, Marina|||0000-0002-6396-0098
  • Valera Fernández, Ángel|||0000-0001-6843-6394
  • Mata Amela, Vicente|||0000-0003-2255-0567
  • Díaz-Rodríguez, Miguel Ángel|||0000-0001-7243-4957
[EN] A robot interacting with the environment requires that the end effector \hboxposition is tracked and that the forces of contact are kept below certain reference values. For instance, in a rehabilitation session using a robotic device, the contact forces are limited by the allowed strength of the human limbs and their complex-joints. In these cases, a control scheme which considers both position and force control is essential to avoid damage to either the end effector or the object interacting with the robot. This paper therefore develops a real-time force/position control scheme for a three-DOF parallel robot whose end effector holds a DOF one translation (1T) and two rotations (2R). The implemented hybrid force/position control considers, as a reference, the normal force on the mobile platform, which is measured by means of a load cell installed on the platform. The position control is designed to track the orientations of the robot either in joint or task space using a model-based control scheme with identified parameters. Moreover, the force control is based on a PD action. The control scheme is developed through simulations, before being applied to an actual parallel robot. The findings show that with the implemented controller, the actual robot accomplishes the reference values for the normal force on the mobile platform, while at the same time the platform accurately follows the required angular orientation., The authors wish to thank the Plan Nacional de I+D, Comision Interministerial de Ciencia y Tecnologia (FEDER-CICYT) for the partial funding of this study under the projects DPI2011-28507-C02-01 and DPI2013-44227-R. This work was also partially supported by the Fondo Nacional de Ciencia, Tecnologia e Innovacion (FONACIT-Venezuela).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

GEMA2:Geometrical matching analytical algorithm for fast mobile robots global self-localization

  • Sánchez Belenguer, Carlos
  • Soriano Vigueras, Ángel
  • Vallés Miquel, Marina|||0000-0002-6396-0098
  • Vendrell Vidal, Eduardo|||0000-0001-7945-1418
  • Valera Fernández, Ángel|||0000-0001-6843-6394
[EN] This paper presents a new algorithm for fast mobile robot self-localization in structured indoor environments based on geometrical and analytical matching, GEMA(2). The proposed method takes advantage of the available structural information to perform a geometrical matching with the environment information provided by measurements collected by a laser range finder. In contrast to other global self-localization algorithms like Monte Carlo or SLAM, GEMA(2) provides a linear cost with respect the number of measures collected, making it suitable for resource-constrained embedded systems. The proposed approach has been implemented and tested in a mobile robot with limited computational resources showing a fast converge from global self-localization. (C) 2014 Elsevier B.V. All rights reserved., This work has been partially funded by FEDER-CICYT projects with references DPI2011-28507-C02-01 and HAR2012-38391-C02-02 financed by Ministerio de Ciencia e Innovacion and Ministerio de Economia y Competitividad (Spain).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A 3-PRS parallel manipulator for ankle rehabilitation: towards a low-cost robotic rehabilitation

  • Vallés Miquel, Marina|||0000-0002-6396-0098
  • Valera Fernández, Ángel|||0000-0001-6843-6394
  • Mata Amela, Vicente|||0000-0003-2255-0567
  • Page Del Pozo, Alvaro Felipe|||0000-0002-5432-310X
  • Díaz-Rodríguez, Miguel Ángel|||0000-0001-7243-4957
  • Cazalilla, J.
This paper presents the design, kinematics, dynamics and control of a low-cost parallel rehabilitation robot developed at the Universitat Polit`ecnica de Valencia. Several position and force controllers have been tested to ensure accurate tracking performances. An orthopedic boot, equipped with a force sensor, has been placed over the platform of the parallel robot to perform exercises for injured ankles. Passive, active-assistive and active-resistive exercises have been implemented to train dorsi/plantar flexion, inversion and eversion ankle movements. In order to implement the controllers, the component-based middleware Orocos has been used with the advantage over other solutions that the whole scheme control can be implemented modularly. These modules are independent and can be configured and reconfigured in both configuration and runtime. This means that no specific knowledge is needed by medical staff, for example, to carry out rehabilitation exercises using this low-cost parallel robot. The integration between Orocos and ROS, with a CAD model displaying the actual position of the rehabilitation robot in real time, makes it possible to develop a teleoperation application. In addition, a teleoperated rehabilitation exercise can be performed by a specialist using a Wiimote (or any other Bluetooth device)., This work was partially financed by Plan Nacional de I+D, Comision Interministerial de Ciencia y Tecnologia (FEDER-CICYT) under the projects DPI2011-28507-C02-01 and DPI2013-44227-R. This research was also partially funded by the CDCHT-ULA Grant I-1377-13-02-F.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Linear matrix inequalities in multirate control over networks

  • Cuenca, Ángel|||0000-0003-4466-2666
  • Salt Llobregat, Julián José|||0000-0002-9640-2658
  • Sala, Antonio|||0000-0002-5691-8772
  • Pizá, Ricardo
This paper faces two of the main drawbacks in networked control systems: bandwidth constraints and timevarying delays. The bandwidth limitations are solved by using multirate control techniques. The resultant multirate controller must ensure closed-loop stability in the presence of time-varying delays. Some stability conditions and a state feedback controller design are formulated in terms of linear matrix inequalities. The theoretical proposal is validated in two different experimental environments: a crane-based test-bed over Ethernet, and a maglev based platform over Profibus. © 2012 Ángel Cuenca et al., The authors A. Cuenca, R. Piza, and J. Salt are grateful to the Spanish Ministry of Education research Grants DPI2011-28507-C02-01 and DPI2009-14744-C03-03, and Generalitat Valenciana Grant GV/2010/018. A. Sala is grateful to the financial support of Spanish Ministry of Economy research Grant DPI2011-27845-C02-01, and Generalitat Valenciana Grant PROMETEO/2008/088.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A Multirate Control Strategy to the Slow Sensors Problem: An Interactive Simulation Tool for Controller Assisted Design

  • Salt Llobregat, Julián José|||0000-0002-9640-2658
  • Cuenca, Ángel|||0000-0003-4466-2666
  • Palau, Francisco
  • Dormido, Sebastian
[EN] In many control applications, the sensor technology used for the measurement of the variable to be controlled is not able to maintain a restricted sampling period. In this context, the assumption of regular and uniform sampling pattern is questionable. Moreover, if the control action updating can be faster than the output measurement frequency in order to fulfill the proposed closed loop behavior, the solution is usually a multirate controller. There are some known aspects to be careful of when a multirate system (MR) is going to be designed. The proper multiplicity between input-output sampling periods, the proper controller structure, the existence of ripples and others issues need to be considered. A useful way to save time and achieve good results is to have an assisted computer design tool. An interactive simulation tool to deal with MR seems to be the right solution. In this paper this kind of simulation application is presented. It allows an easy understanding of the performance degrading or improvement when changing the multirate sampling pattern parameters. The tool was developed using Sysquake, a Matlab-like language with fast execution and powerful graphic facilities. It can be delivered as an executable. In the paper a detailed explanation of MR treatment is also included and the design of four different MR controllers with flexible structure to be adapted to different schemes will also be presented. The Smith's predictor in these MR schemes is also explained, justified and used when time delays appear. Finally some interesting observations achieved using this interactive tool are included., This work was supported in part by the Spanish Ministry of Economy and Competitiveness under Project DPI2012-31303. The authors J. Salt, A. Cuenca, are grateful to Grant TEC2012-31506, from the Spanish Ministry of Education. The work of A. Cuenca was supported in part by the Spanish Ministerio de Economia under Grant DPI2011-28507-C02-01.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Distributed sensor architecture for intelligent control that supports quality of control and quality of service

  • Poza-Lujan, Jose-Luis|||0000-0003-2450-9920
  • Posadas-Yagüe, Juan-Luis|||0000-0002-5017-8689
  • Simó Ten, José Enrique|||0000-0003-4677-7627
  • Simarro Fernández, Raúl|||0000-0002-7311-2025
  • Benet Gilabert, Ginés|||0000-0003-3856-5501
This paper is part of a study of intelligent architectures for distributed control and communications systems. The study focuses on optimizing control systems by evaluating the performance of middleware through quality of service (QoS) parameters and the optimization of control using Quality of Control (QoC) parameters. The main aim of this work is to study, design, develop, and evaluate a distributed control architecture based on the Data-Distribution Service for Real-Time Systems (DDS) communication standard as proposed by the Object Management Group (OMG). As a result of the study, an architecture called Frame-Sensor-Adapter to Control (FSACtrl) has been developed. FSACtrl provides a model to implement an intelligent distributed Event-Based Control (EBC) system with support to measure QoS and QoC parameters. The novelty consists of using, simultaneously, the measured QoS and QoC parameters to make decisions about the control action with a new method called Event Based Quality Integral Cycle. To validate the architecture, the first five Braitenberg vehicles have been implemented using the FSACtrl architecture. The experimental outcomes, demonstrate the convenience of using jointly QoS and QoC parameters in distributed control systems., The study described in this paper is a part of the coordinated project COBAMI: Mission-based Hierarchical Control. Education and Science Department Spanish Government. CICYT: MICINN: DPI2011-28507-C02-01/02 and project "Real time distributed control systems" of the Support Program for Research and Development 2012 UPV (PAID-06-12).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A reliability-based particle filter for humanoid robot self-localization in Robocup Standard Platform League

  • Munera Sánchez, Eduardo
  • Muñoz Alcobendas, Manuel
  • Blanes Noguera, Francisco|||0000-0002-9234-5377
  • Benet Gilabert, Ginés|||0000-0003-3856-5501
  • Simó Ten, José Enrique|||0000-0003-4677-7627
This paper deals with the problem of humanoid robot localization and proposes a new method for position estimation that has been developed for the RoboCup Standard Platform League environment. Firstly, a complete vision system has been implemented in the Nao robot platform that enables the detection of relevant field markers. The detection of field markers provides some estimation of distances for the current robot position. To reduce errors in these distance measurements, extrinsic and intrinsic camera calibration procedures have been developed and described. To validate the localization algorithm, experiments covering many of the typical situations that arise during RoboCup games have been developed: ranging from degradation in position estimation to total loss of position (due to falls, 'kidnapped robot', or penalization). The self-localization method developed is based on the classical particle filter algorithm. The main contribution of this work is a new particle selection strategy. Our approach reduces the CPU computing time required for each iteration and so eases the limited resource availability problem that is common in robot platforms such as Nao. The experimental results show the quality of the new algorithm in terms of localization and CPU time consumption., This work has been supported by the Spanish Science and Innovation Ministry (MICINN) under the CICYT project COBAMI: DPI2011-28507-C02-01/02. The responsibility for the content remains with the authors.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Optimizations on semantic environment management: an application for humanoid robot home assistance

  • Munera Sánchez, Eduardo
  • Posadas-Yagüe, Juan-Luis|||0000-0002-5017-8689
  • Poza-Lujan, Jose-Luis|||0000-0003-2450-9920
  • Blanes Noguera, Francisco|||0000-0002-9234-5377
  • Simó Ten, José Enrique|||0000-0003-4677-7627
This article introduces some optimization mechanisms focused on environment management, object recognition, and environment interaction. Although the generality of the presented system, this work will be focused on its application on home assistance humanoid robots. For this purpose, a generic environment formalization procedure for semantic scenery description is introduced. As the main contribution of this work, some techniques for a more efficient use of the environment knowledge are proposed. That way, the application of an areabased discrimination mechanism will avoid to process large amounts of data, useless in the current context, improving the object recognition, and characterizing the available interactions in the current area. Finally, the formalized description, and the optimization procedure, will be tested and verified on a specific home scenario using a humanoid robot, This work has been supported by the Spanish Science and Innovation Ministry MICINN under the CICYT project COBAMI: DPI2011-28507-C02-01/02. The responsibility for the content remains with the authors.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

A Hierarchical Hybrid Architecture for Mission-Oriented Robot Control

  • Muñoz Alcobendas, Manuel
  • Munera Sánchez, Eduardo
  • Blanes Noguera, Francisco|||0000-0002-9234-5377
  • Simó Ten, José Enrique|||0000-0003-4677-7627
In this work is presented a general architecture for a multi physical agent network system based on the coordination and the behaviour management. The system is organised in a hierarchical structure where are distinguished the individual agent actions and the collective ones linked to the whole agent network. Individual actions are also organised in a hybrid layered system that take advantages from reactive and deliberative control. Sensing system is involved as well in the behaviour architecture improving the information acquisition performance., This work has been partially supported by the Spanish Ministry of Economy and Competitiveness under the CICYT project Mission Based Control (COBAMI): DPI2011-28507-C02-02, under coordinated project High Integrity Partitioned Embedded Systems (Hi-PartES): TIN2011-28567-C03-03, and under the collaborative research project supported by the European Union MultiPARTES Project: FP7-ICT 287702. 2011-14.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Robust tuning of a generalized predictor-based controller for integrating and unstable systems with long time-delay

  • García Gil, Pedro José|||0000-0002-1202-1269
  • Albertos Pérez, Pedro
In this work, a general structure to control long time-delay plants is proposed and an easy methodology to tune the control parameters is outlined. All the sensitivity transfer functions are delay free. The proposed scheme is equivalent to the Smith predictor but able to cope with any kind of systems, including nonminimum phase, unstable and integrating plants. The controllers are designed based on the delay free model. Contrary to other approaches, other than for the digital implementation, no delay approximation is used. A tuning parameter is provided in order to reach an intuitive tradeoff between performance and robust stability. A comparative analysis with respect to recently successful proposals shows a substantial improvement in the performance/robustness tradeoff as well as in the tuning process., This work has been partially granted by the Spanish Ministry of Education research Grants DPI2011-28507-C02-01 and PAID-06-12. The authors are also grateful to the Associate Editor and anonymous reviewers for their valuable feedback and comments.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Distributed System for Intelligent Management of Lost or Abandoned Pets

  • Garrote Hildebrand, Daniel
  • Jiménez García, José Luis
  • Poza-Lujan, Jose-Luis|||0000-0003-2450-9920
  • Posadas-Yagüe, Juan-Luis|||0000-0002-5017-8689
  • Simó Ten, José Enrique|||0000-0003-4677-7627
[EN] This paper presents the architecture of a mobile-based distributed system which aims to minimize the social impact of abandoned or lost animals. To reach this purpose the distributed system has two main goals: to obtain the best pets quality information and to optimize the reporting process that allows their rescue. The distributed system is based on the client-server paradigm. By using smart mobile devices clients may provide message warnings of animals localized. In order to enter data such as photographs, audio and artificial images, this system uses different mobile device interfaces. Messages with the pet information are stored in a server database to be processed intelligently. Data processing consists mainly in matching localized animals with lost animals, assigning abandoned animals to shelters and generating notifications for animal shelters or authorities. This matching uses an efficient selection algorithm based on common meta-information to each image. This efficient selection facilitates selective notification deliveries avoiding redundancy. This article shows the architecture details, as well as the first achieved results with prototypes and real data., The study described in this paper is a part of the coordinated project COBAMI: Mission-based Hierarchical Control. Education and Science Department, Spanish Government. CICYT: MICINN: DPI2011-28507-C02-01/02 and the project "Real time distributed control systems" of the Support Program for Research and Development 2012 UPV (PAID-06-12)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Event Management Proposal for Distribution Data Service Standard

  • Poza-Lujan, Jose-Luis|||0000-0003-2450-9920
  • Posadas-Yagüe, Juan-Luis|||0000-0002-5017-8689
  • Simó Ten, José Enrique|||0000-0003-4677-7627
This paper presents a proposal to extend the event management subsystem of the Distribution Data Service standard (DDS). The proposal allows user to optimize the use of DDS in networked control systems (NCS). DDS offers a simple event management system based on message filtering. The aim of the proposal is to improve the event management with three main elements: Events, Conditions and Actions. Actions are the new element proposed. Actions perform basic operations in the middleware, discharging the process load of control elements. The proposal is fully compatible with the standard and can be easily added to an existing system. Proposal has been tested in a distributed mobile robot navigation system with interesting results., The study described in this paper is a part of the coordinated project COBAMI: Mission-based Hierarchical Control. Education and Science Department, Spanish Government. CICYT: MICINN: DP1201 1-28507-C02-01/02.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Experimental application of Takagi-Sugeno observers and controllers in a nonlinear electromechanical system

  • Lendek, Zsofia
  • Sanchis Llopis, Roberto
  • Sala, Antonio|||0000-0002-5691-8772
  • García Gil, Pedro José|||0000-0002-1202-1269
[EN] In this paper, a systematic methodology to design fuzzy Takagi-Sugeno observers and controllers will be used to estimate the angular positions and speeds, as well as to stabilise an experimental mechanical system with 3 degrees of freedom (fixed quadrotor). Takagi-Sugeno observers and controllers are compared to observers and controllers based on the linearized model, both designed with the same optimization criteria and design parameters. Experimental results confirm that Takagi-Sugeno models and observers behave similarly to linear ones around the linearization point, but have a better performance over a larger operating range, as intuitively expected., The work of Zs. Lendek was supported by a grant of the Romanian National Authority for Scientific Research, CNCS UEFISCDI, project number PN-II-RU-TE-2011-3-0043, contract number 74/05.10.2011. Spanish authors are grateful to grants DPI2011-27845-C02-01 (A. Sala), DPI2011-27845-C02-02 (R. Sanchis), DPI2011-28507-C02-01 (P. Garcia) from Spanish Government, and PROMETEOII/2013/004 (A. Sala, P. Garcia) from Generalitat Valenciana.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A non-uniform multi-rate control strategy for a Markov chain-driven Networked Control System

  • Cuenca, Ángel|||0000-0003-4466-2666
  • Salt Llobregat, Julián José|||0000-0002-9640-2658
  • Ojha, Unnati
  • Chow, Mo-Yuen
[EN] In this work, a non-uniform multi-rate control strategy is applied to a kind of Networked Control System (NCS) where a wireless path tracking control for an Unmanned Ground Vehicle (UGV) is carried out. The main aims of the proposed strategy are to face time-varying network-induced delays and to avoid packet disorder. A Markov chain-driven NCS scenario will be considered, where different network load situations, and consequently, different probability density functions for the network delay are assumed. In order to assure mean-square stability for the considered NCS, a decay-rate based sufficient condition is enunciated in terms of probabilistic Linear Matrix Inequalities (LMIs). Simulation results show better control performance, and more accurate path tracking, for the scheduled (delay-dependent) controller than for the non-scheduled one (i.e. the nominal controller when delays appear). Finally, the control strategy is validated on an experimental test-bed., This work was supported in part by Grants TEC2012-31506 from the Spanish Ministry of Education, DPI2011-28507-C02-01 by the Spanish Ministry of Economy, and PAID-00-12 from Technical University of Valencia (Spain). In addition, this research work has been developed as a result of a mobility stay funded by the Erasmus Mundus Programme of the European Commission under the Transatlantic Partnership for Excellence in Engineering (TEE Project).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Distance computation between non-holonomic motions with constant accelerations

  • Bernabeu Soler, Enrique Jorge|||0000-0002-9866-8468
  • Valera Fernández, Ángel|||0000-0001-6843-6394
  • Gómez Moreno, Javier
A method for computing the distance between two moving robots or between a mobile robot and a dynamic obstacle with linear or arc-like motions and with constant accelerations is presented in this paper. This distance is obtained without stepping or discretizing the motions of the robots or obstacles. The robots and obstacles are modelled by convex hulls. This technique obtains the future instant in time when two moving objects will be at their minimum translational distance - i.e., at their minimum separation or maximum penetration (if they will collide). This distance and the future instant in time are computed in parallel. This method is intended to be run each time new information from the world is received and, consequently, it can be used for generating collision-free trajectories for non-holonomic mobile robots., This work was partially funded by the Spanish government CICYT projects: DPI2010-20814-C02-02, and DPI2011-28507-C02-01.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Hierarchical Triple-Maglev Dual-Rate Control Over a Profibus-DP Network

  • Pizá, Ricardo
  • Salt Llobregat, Julián José|||0000-0002-9640-2658
  • Sala, Antonio|||0000-0002-5691-8772
  • Cuenca, Ángel|||0000-0003-4466-2666
This paper addresses a networked control system application on an unstable triple-magnetic-levitation setup. A hierarchical dual-rate control using a Profibus-decentralized peripherals network has been used to stabilize a triangular platform composed of three maglevs. The difficulty in control is increased by time-varying network-induced delays. To solve this issue, a local decentralized H∞ control action is complemented by means of a lower rate output feedback controller on the remote side. Experimental results show good stabilization and reference position accuracy under disturbances., Manuscript received October 24, 2011; revised July 30, 2012; accepted September 9, 2012. Manuscript received in final form October 2, 2012. Date of publication November 12, 2012; date of current version December 17, 2013. The work of R. Piza, J. Salt, and A. Cuenca was supported in part by the Spanish Ministerio de Economia under Grant DPI2011-28507-C02-01, Grant DPI2009-14744-C03-03, and Grant ENE2010-21711-C02-01 and the Generalitat Valenciana Grant GV/2010/018. The work of A. Sala was supported in part by the Spanish Ministerio de Economia under Grant DPI2011-27845-C02-01 and the Generalitat Valenciana Grant PROMETEO/2008/088. Recommended by Associate Editor C. De Persis.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

RST controller design for a non-uniform multi-rate control system

  • Cuenca, Ángel|||0000-0003-4466-2666
  • Salt Llobregat, Julián José|||0000-0002-9640-2658
In this work, a non-uniform multi-rate controller which includes an RST control stage is introduced. Due to several issues, in some systems the use of non-uniform (irregular) multi-rate sampling becomes inevitable. When using a uniform (regular) multi-rate controller in this kind of situations, control performance is usually degraded (if it is compared to that obtained in the nominal, uniform sampling context). Thus, the design of a non-uniform controller proper for this sampling scheme is needed to keep the performance. A sequence of different non-uniform sampling frames can be considered, and different controllers must be designed for each frame using appropriate methods. When switching among these controllers, stability problems can appear. So, the control system stability will be assured in terms of Linear Matrix Inequalities (LMIs). To achieve some advantages at the design step, the discrete-time input¿output representation will be used. But, since the classical, uniform z−i delay operator could not be able to represent non-uniform sampling situations, the so-called non-uniform operator will be required. Simulation results illustrate that this control proposal is able to keep control system performance and preserve stability., The authors A. Cuenca and J. Salt are grateful to the Spanish Ministry of Education research Grants DPI2011-28507-C02-01 and DPI2009-14744-C03-03. In addition, A. Cuenca is grateful to Generalitat Valenciana Grant GV/2010/018, and J. Salt to the financial support of the Spanish Ministry of Education, "Salvador de Madariaga" Program PR2010-0310.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Núcleo de Control: Controladores modulares en entornos distribuidos, Control kernel: Modular controllers in distributed environments

  • Simarro Fernández, Raúl|||0000-0002-7311-2025
  • Simó Ten, José Enrique|||0000-0003-4677-7627
  • Navarro Herrero, José Luís|||0000-0001-6544-9552
  • Poza-Lujan, Jose-Luis|||0000-0003-2450-9920
  • Posadas-Yagüe, Juan-Luis|||0000-0002-5017-8689
[ES] En este artículo se describe una estrategia de control distribuida, utilizando elementos empotrados, mediante un PLGGOHZDUH de control denominado núcleo de control, en el que se implementan controladores digitales de altas prestaciones, diseñados de forma modular, en sistemas con capacidad de cómputo limitada. Se presenta una metodología tanto para la obtención de una métrica que permita la comparación de los distintos modos de funcionamiento ante pérdidas de datos, como para la elección de los parámetros de los controladores a implementar en cada nodo del sistema distribuido de control. Se presentan varios modos de funcionamiento que permite adaptar el sistema desarrollado a distintas situaciones. El trabajo se completa con la implementación de la simulación del sistema distribuido y su prueba sobre un proceso real., [EN] In this paper a distributed control strategy described using embedded items, using a control middleware called control kernel, in which high performance digital controllers designed in a modular way, on systems with limited computational capabilities are implemented. A methodology is presented for both obtaining a metric that allows comparison of different modes of operation for any loss of data, and for the choice of parameters of the controllers implemented in each node of the distributed control system. Multi-mode which allows adapting the system developed at different situations arise. The work was completed with the implementation of distributed system simulation and test of a real process., Este trabajo ha sido parcialmente financiado por el proyecto CICYT COBAMI con referencia DPI 2011-28507-C02-01/02, del Ministerio de Educación y Ciencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Architecting centralized coordination of soccer robots based on principle solution

  • Guarnizo Marín, José Guillermo
  • Low, Cheng Yee
  • Mellado, Martin|||0000-0002-3429-5316
  • Blanes Noguera, Francisco|||0000-0002-9234-5377
Coordination strategy is a relevant topic in multi-robot systems, and robot soccer offers a suitable domain to conduct research in multi-robot coordination. Team strategy collects and uses environmental information to derive optimal team reactions, through cooperation among individual soccer robots. This paper presents a diagrammatic approach to architecting the coordination strategy of robot soccer teams by means of a principle solution. The proposed model focuses on robot soccer leagues that possess a central decision-making system, involving the dynamic selection of the roles and behaviors of the robot soccer players. The work sets out from the conceptual design phase, facilitating cross-domain development efforts, where different layers must be interconnected and coordinated to perform multiple tasks. The principle solution allows for intuitive design and the modeling of team strategies in a highly complex robot soccer environment with changing game conditions. Furthermore, such an approach enables systematic realization of collaborative behaviors among the teammates., This work was partially supported by the Spanish Ministry of Economy and Competitiveness (MINECO) under the CICYT project Mission Based Control (COBAMI): DPI2011-28507-C02-01/02. Jose G. Guarnizo was supported by a scholarship from the Administrative Department of Science, Technology and Innovation COLCIENCIAS, Colombia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Predictor-observer-based control of systems with multiple input/output delays

  • Albertos Pérez, Pedro
  • García Gil, Pedro José|||0000-0002-1202-1269
[EN] This paper deals with the control of single-input¿single-output linear time-delayed systems, when there are different delays in the output/input transfer function. The process can be disturbed and unstable. A new control structure is proposed, solving the problem in several steps. First, by using a stable predictor/observer the plant is stabilized, regardless the delays. On the stable plant, the multidelay plant model is considered as a single delay plant with additional disturbances. The problem of disturbance rejection is solved by using a disturbance observer approach. Finally, output tracking is achieved by a two degrees of freedom controller., This project has been partially granted by Conselleria de Educacion Valenciana under PROMETEO project number 2008-088 and CICYT Project DPI2011-28507-C02-01.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Multi sensor fusion framework for indoor-outdoor localization of limited resource mobile robots

  • Marín, Leonardo
  • Soriano Vigueras, Ángel
  • Vallés Miquel, Marina|||0000-0002-6396-0098
  • Valera Fernández, Ángel|||0000-0001-6843-6394
  • Albertos Pérez, Pedro
This paper presents a sensor fusion framework that improves the localization of mobile robots with limited computational resources. It employs an event based Kalman Filter to combine the measurements of a global sensor and an inertial measurement unit (IMU) on an event based schedule, using fewer resources (execution time and bandwidth) but with similar performance when compared to the traditional methods. The event is defined to reflect the necessity of the global information, when the estimation error covariance exceeds a predefined limit. The proposed experimental platforms are based on the LEGO Mindstorm NXT, and consist of a differential wheel mobile robot navigating indoors with a zenithal camera as global sensor, and an Ackermann steering mobile robot navigating outdoors with a SBG Systems GPS accessed through an IGEP board that also serves as datalogger. The IMU in both robots is built using the NXT motor encoders along with one gyroscope, one compass and two accelerometers from Hitecnic, placed according to a particle based dynamic model of the robots. The tests performed reflect the correct performance and low execution time of the proposed framework. The robustness and stability is observed during a long walk test in both indoors and outdoors environments., This work has been partially funded by FEDER-CICYT projects with references DPI2011-28507-C02-01 and DPI2010-20814-C02-02, financed by Ministerio de Ciencia e Innovacion (Spain). Also, the financial support from the University of Costa Rica is greatly appreciated.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Distributed Collision Avoidance Method based on Consensus among Mobile Robotic Agents

  • Soriano Vigueras, Ángel
  • Bernabeu Soler, Enrique Jorge|||0000-0002-9866-8468
  • Valera Fernández, Ángel|||0000-0001-6843-6394
  • Vallés Miquel, Marina|||0000-0002-6396-0098
[EN] This paper presents a new methodical approach to the problem of collision avoidance of mobile robots taking advantages of multi-agents systems to deliver solutions that benefit the whole system. The proposed method has the next phases: collision detection, obstacle identification, negotiation and collision avoidance. In addition of simulations with virtual robots in a 2D and 3D space, an implementation with real mobile robots has been developed in order to validate the proposed algorithm. The robots are based on Lego NXT, and they are equipped with a ring of proximity sensors for the collisions detections. The platform for the implementation and management of the multi-agent system is JADE., This work has been partially funded by the Ministerio de Ciencia e Innovación (Spain) under research projects DPI2011-28507-C02-01 and DPI2010-20814-C02-02
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Smart device definition and application on embedded system: performance and optimi-zation on a RGBD sensor

  • Jimenez-Garcia, Jose-Luis
  • Baselga-Masia, David
  • Munera Sánchez, Eduardo
  • Poza-Lujan, Jose-Luis
  • Posadas-Yagüe, Juan-Luis
  • Simó-Ten, José-Enrique
[EN] Embedded control systems usually are characterized by its limitations in terms of computational power and memory. Although this systems must deal with perpection and actuation signal adaptation and calculate control actions ensuring its reliability and providing a certain degree of fault tolerance. The allocation of these tasks between some different embedded nodes conforming a distributed control system allows to solve many of these issues. For that reason is proposed the application of smart devices aims to perform the data processing tasks related with the perception and actuation and offer a simple interface to be configured by other nodes in order to share processed information and raise QoS based alarms. In this work is introduced the procedure of implementing a smart device as a sensor as an embedded node in a distributed control system. In order to analyze its benefits an application based on a RGBD sensor implemented as a smart device is proposed., This work has been supported by the coordinated project COBAMI: Mission-based Hierarchical Control. Education and Science Department, Spanish Government. CICYT: MICINN:DPI2011-28507-C02-01/02 and project “Real time distributed control systems” of the Support Program for Research and Development 2012 UPV (PAID-06-12)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Mobile-Based Distributed System for Managing Abandoned or Lost Pets

  • Garrote-Hildebrand, Daniel
  • Poza-Lujan, Jose-Luis|||0000-0003-2450-9920
  • Posadas-Yagüe, Juan-Luis|||0000-0002-5017-8689
  • Simó Ten, José Enrique|||0000-0003-4677-7627
This paper presents the work in progress of a mobile-based distributed system which aims to minimize the social impact of abandoned or lost animals. System is based on the use of smart mobile devices to provide message warnings of animals localized. Messages are stored in a database to be processed. In order to enter data such as photography, audio and artificial images, system uses different mobile device interfaces. Data processing consists mainly in matching localized animals with lost animals, assigning abandoned animals at shelters and generating notifications for animal shelters or authorities. Currently, the system is in the development phase. The technical challenges in which we are working are to optimize data and metadata matching, and the management of message warning., The study described in this paper is a part of the coordinated project COBAMI: Mission-based Hierarchical Control. Education and Science Department, Spanish Government. CICYT: MICINN: DP1201 1-28507-C02-01/02.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Adaptive control of a 3-DOF parallel manipulator considering payload handling and relevant parameter models

  • Cazalilla, J.
  • Vallés Miquel, Marina|||0000-0002-6396-0098
  • Mata Amela, Vicente|||0000-0003-2255-0567
  • Díaz-Rodríguez, Miguel Ángel|||0000-0001-7243-4957
  • Valera Fernández, Ángel|||0000-0001-6843-6394
Model-based control improves robot performance provided that the dynamics parameters are estimated accurately. However, some of the model parameters change with time, e.g. friction parameters and unknown payload. Particularly, off-line identification approaches omit the payload estimation (due to practical reasons). Adaptive control copes with some of these structural uncertainties. Thus, this work implements an adaptive control scheme for a 3-DOF parallel manipulator. The controller relies on a novel relevant-parameter dynamic model that permits to study the cases in where the uncertainties affect: (1) rigid body parameters, (2) friction parameters, (3) actuator dynamics, and (4) a combination of the former cases. The simulations and experiments verify the performance of the proposed controller. The control scheme is implemented on the modular programming environment Open Robot Control Software (OROCOS). Finally, an experimental setup evaluates the controller performance when the robot handles a payload., This work was partially financed by Fondo Nacional de Ciencia y Tecnologia e Innovacion (FONACIT, Venezuela), CDCHT-ULA Grant I-1286-11-02-B and Plan Nacional de I+D, Comision Interministerial de Ciencia y Tecnologia (FEDER-CICYT, Spain) under the research projects DPI2011-28507-C02-01 and DPI2010-20814-C02-02.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Control kernel based adaptive control implementation

  • Simarro Fernández, Raúl|||0000-0002-7311-2025
  • Albertos Pérez, Pedro
  • Simó Ten, José Enrique|||0000-0003-4677-7627
[EN] A control system with distributed computing resources always should guarantee the safe control of the plant. In this contribution, the concept of control kernel is used for that purpose. Two types of nodes with different resources are defined: the powerful server node and the resource-constrained light node. This architecture allows to split the control tasks into two blocks. Those demanding strong computing resources are allocated in the server nodes and those compelling tasks required to ensure the safety of the controlled plant are allocated in the light nodes. Resource limitations lead to control adaptation. Two simple applications illustrate some of the benefits of this architecture with one server node and one light node, even the architecture can be extended to several nodes. In the first case, an adaptive control is implemented in the server node, providing the control algorithm to the light node, which is also able to compute a local safe control action. In the second experiment, two different control tasks requiring different resources are implemented in a mobile robot control. To keep bounded the computing time at the local level, the supervisor decides the time allocated to each activity, providing the resulting controller to the light node., This work has been partially granted by Conselleria de Educación Generalitat Valenciana, under PROMETEO project number 2008-088, and Ministerio de Ciencia e Innovaci´on under COBAMI project DPI2011-28507-C02-01/02.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Event based localization in Ackermann steering limited resource mobile robots

  • Marín, Leonardo
  • Soriano Vigueras, Ángel
  • Vallés Miquel, Marina|||0000-0002-6396-0098
  • Valera Fernández, Ángel|||0000-0001-6843-6394
  • Albertos Pérez, Pedro
This paper presents a local sensor fusion technique with an event-based global position correction to improve the localization of a mobile robot with limited computational resources. The proposed algorithms use a modified Kalman filter and a new local dynamic model of an Ackermann steering mobile robot. It has a similar performance but faster execution when compared to more complex fusion schemes, allowing its implementation inside the robot. As a global sensor, an event-based position correction is implemented using the Kalman filter error covariance and the position measurement obtained from a zenithal camera. The solution is tested during a long walk with different trajectories using a LEGO Mindstorm NXT robot., This work was supported by FEDER-CICYT projects with references DPI2011-28507-C02-01 and DPI2010-20814-C02-02, financed by the Ministerio de Ciencia e Innovacion (Spain). This work was also supported by the University of Costa Rica.