Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Model-based control of a 3-DOF parallel robot based on identified relevant parameters

  • Díaz-Rodríguez, Miguel
  • Valera Fernández, Ángel|||0000-0001-6843-6394
  • Mata Amela, Vicente|||0000-0003-2255-0567
  • Vallés Miquel, Marina|||0000-0002-6396-0098
This paper presents in detail how to model, identify, and control a 3-DOF prismatics-revolute-spherical parallel manipulator in terms of relevant parameters. A reduced model based on a set of relevant parameters is obtained following a novel approach that considers a simplified dynamic model with a physically feasible set of parameters. The proposed control system is compared with the response of a model-based control that considers the complete identification of the rigid-body dynamic parameters, friction at joints, and the inertia of the actuators. The control systems are implemented on a virtual and an actual prototype. The results show that the control scheme based on the reduced model improves the trajectory tracking precision when comparing with the control scheme based on the complete set of dynamic parameters. Moreover, the reduced model shows a significant reduction in the computational burden, allowing real-time control., This work was supported in part by the Spanish Government under Grant DPI2010-20814-C02-01 (IDEMOV) and in part by the Consejo de Desarrollo Cientifico, Humanistico y Tecnologico de la Universidad de Los Andes (CDCHT-ULA) under Grant I-1286-11-02-B.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Mechatronic development and dynamic control of a 3-DOF parallel manipulator

  • Vallés Miquel, Marina|||0000-0002-6396-0098
  • Valera Fernández, Ángel|||0000-0001-6843-6394
  • Mata Amela, Vicente|||0000-0003-2255-0567
  • Page Del Pozo, Alvaro Felipe|||0000-0002-5432-310X
  • Díaz-Rodríguez, Miguel
The aim of this article is to develop, from the mechatronic point of view, a low-cost parallel manipulator (PM) with 3-degrees of freedom (DOF). The robot has to be able to generate and control one translational motion (heave) and two rotary motions (rolling and pitching). Applications for this kind of parallel manipulator can be found at least in driving-motion simulation and in the biomechanical field. An open control architecture has been developed for this manipulator, which allows implementing and testing different dynamic control schemes for a PM with 3-DOF. Thus, the robot developed can be used as a test bench where control schemes can be tested. In this article, several control schemes are proposed and the tracking control responses are compared. The schemes considered are based on passivity-based control and inverse dynamic control. The control algorithm considers point-to-point control or tracking control. When the controller considers the system dynamics, an identified model has been used. The control schemes have been tested on a virtual robot and on the actual prototype. © 2012 Taylor & Francis Group, LLC., The authors wish to express their gratitude to the Plan Nacional de I+D, Comision Interministerial de Ciencia y Tecnologia (FEDER-CICYT) for the partial financing of this study under the projects DPI2009-13830-C02-01 and DPI2010-20814-C02-(01, 02). This work was also supported in part by the CDCHT-ULA Grant I-1286-11-02-B.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Adaptive control of a 3-DOF parallel manipulator considering payload handling and relevant parameter models

  • Cazalilla, J.
  • Vallés Miquel, Marina|||0000-0002-6396-0098
  • Mata Amela, Vicente|||0000-0003-2255-0567
  • Díaz-Rodríguez, Miguel Ángel|||0000-0001-7243-4957
  • Valera Fernández, Ángel|||0000-0001-6843-6394
Model-based control improves robot performance provided that the dynamics parameters are estimated accurately. However, some of the model parameters change with time, e.g. friction parameters and unknown payload. Particularly, off-line identification approaches omit the payload estimation (due to practical reasons). Adaptive control copes with some of these structural uncertainties. Thus, this work implements an adaptive control scheme for a 3-DOF parallel manipulator. The controller relies on a novel relevant-parameter dynamic model that permits to study the cases in where the uncertainties affect: (1) rigid body parameters, (2) friction parameters, (3) actuator dynamics, and (4) a combination of the former cases. The simulations and experiments verify the performance of the proposed controller. The control scheme is implemented on the modular programming environment Open Robot Control Software (OROCOS). Finally, an experimental setup evaluates the controller performance when the robot handles a payload., This work was partially financed by Fondo Nacional de Ciencia y Tecnologia e Innovacion (FONACIT, Venezuela), CDCHT-ULA Grant I-1286-11-02-B and Plan Nacional de I+D, Comision Interministerial de Ciencia y Tecnologia (FEDER-CICYT, Spain) under the research projects DPI2011-28507-C02-01 and DPI2010-20814-C02-02.