Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 23
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Reactive Sliding-Mode Algorithm for Collision Avoidance in Robotic Systems

  • Gracia Calandin, Luis Ignacio|||0000-0001-9258-9286
  • Sala, Antonio|||0000-0002-5691-8772
  • Garelli, Fabricio
This brief presents a reactive reference conditioning algorithm for robot collision avoidance based on geometric invariance and sliding-mode (SM) ideas. First, constraints are defined in terms of the measurements given by the robot s sensors in order to guarantee that collisions will not occur. Then, a supervisory loop ensures the fulfillment of the constraints modifying the reference trajectory as much as necessary by means of a discontinuous control law. The proposed algorithm activates only when the constraints are about to be violated and, thus, in contrast to conventional SM approaches, there exists no reaching mode to the limit surface of the constraints (sliding surface). The validity and effectiveness of the proposed approach is substantiated by simulation and experimental results using a mobile robot equipped with infrared sensors., This work was supported in part by research under Project DPI2011-27845-C02-01 (Spanish Government), Projects PAID-05-11-2640, and PAID-00-12-SP20120159, (Universitat Politecnica de Valencia, Spain), and Projects ANPCyT PICT-2011-0888, CONICET PIP 112-2011-00361, and UNLP I164 in Argentina. Recommended by Associate Editor M. Zefran.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Bionanocomposite films based on plasticized PLA PHB/cellulose nanocrystal blends

  • ARRIETA, Marina Patricia
  • Fortunati, E.
  • Dominici, F.
  • Kenny, J. M.
  • López-Martínez, Juan|||0000-0001-6904-2282
Optically transparent plasticized poly(lactic acid) (PLA) based bionanocomposite films intended for food packaging were prepared by melt blending. Materials were plasticized with 15 wt% of acetyl(tributyl citrate) (ATBC) to improve the material process ability and to obtain flexibile films. Poly(hydroxybutyrate) (PHB) was used to increase PLA crystallinity. The thermal stability of the PLA-PHB blends was improved by the addition of 5 wt% of cellulose nanocrystals (CNC) or modified cellulose nanocrystals (CNCs) synthesized from microcrystalline cellulose. The combination of ATBC and cellulose nanocrystals, mainly the better dispersed CNCs, improved the interaction between PLA and PHB. Thus, an improvement on the oxygen barrier and stretchability was achieved in PLA-PHB-CNCs-ATBC which also displayed somewhat UV light blocking effect. All bionanocomposite films presented appropriate disintegration in compost suggesting their possible applications as biodegradable packaging materials. (C) 2014 Elsevier Ltd. All rights reserved., Authors wish to acknowledge Spanish Ministry of Science and Innovation (MAT2011-28468-C02-01 and 02), Prof. A. Jimenez and Dr. Nuria Burgos (University of Alicante, Spain) for their assistance in OTR measurements and Gesenu S.p.a. for compost supply. M.P. Arrieta wishes to thank Generalitat Valenciana for Santiago Grisolia Fellowship (2011/007) and Universitat Politecnica de Valencia for the Development Support Programme PAID-00-12 (SP20120120).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Temporal evolution of some mortality indicators: Application to Spanish data

  • Debón, A.|||0000-0002-5116-289X
  • Martínez Ruiz, F
  • Montes, F
[EN] In Spain, as in other developed countries, significant changes in mortality patterns have occurred during the 20th and 21st centuries. One reflection of these changes is life expectancy, which has improved in this period, although the robustness of this indicator prevents these changes from being of the same order as those for the probability of death. If, moreover, we bear in mind that life expectancy offers no information as to whether this improvement is the same for different age groups, it is important and necessary to turn to other mortality indicators whose past and future evolution in Spain we are going to study. These indicators are applied to Spanish mortality data for the period 1981–2008, for the age range 0–99. To study its future evolution, the mortality ratios have to be projected using an adequate methodology, namely, the Lee-Carter model. Con- fidence intervals for these predictions can be calculated using the methodology that Lee and Carter apply in their original article for expected lifetime confidence intervals, but they take into account only the error in the prediction of the mortality index obtained from the ARIMA model adjusted to its temporal series, excluding other sources of error such as that introduced by estimations of the other parameters in the model. That is why bootstrap procedures are preferred, permitting the combination of all sources of uncertainty., Support for the research presented in this paper was provided by a grants from MeyC (Ministerio de Educacio´n y Ciencia, Spain), projects MTM2010-14961 and MTM2008-05152. This article was finished in two research stays at Cass Business School (London) funded by ‘‘Jose´ Castillejo’’ Program, Universitat Polite`cnica de Vale`ncia (PAID-00-12) and the Faculty de Administracio´n y Direccio´n de Empresas. We appreciate this funding and the opportunity to discuss our ideas with faculty and doctoral students Cass Business School.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Spring Establishment of Four Warm Season Turfgrasses After Fall Indaziflam Applications

  • Gómez De Barreda, Diego
  • Reed, Thomas V.
  • Yu, Jialin
  • McCullough, Patrick E.
[ES] Indaziflam es un herbicida PRE efectivo para el control de Poa annua, pero los efectos residuales en el suelo en áreas tratadas podrían inhibir el establecimiento del césped en la primavera. Para evaluar esta hipótesis, se realizaron experimentos de campo para evaluar el establecimiento de los céspedes Cynodon dactylon x C. transvaalensis (bermuda), Eremochloa ophiuroides (centipede), Stenotaphrum secundatum (St. Augustine), y Zoysia matrella (zoysia) después de aplicaciones de indaziflam en el otoño anterior. En el verano, el crecimiento lateral a partir de los estolones sembrados generalmente no tuvo diferencias importantes producto de los tratamientos. Sin embargo, las dosis altas de indaziflam (70 y 140 g ai ha−1) tuvieron aproximadamente dos veces más estolones sin enraizar que el testigo sin tratar, mientras que las dosis bajas (17.5 y 35 g ha−1), oxadiazon a 3360 g ai ha−1, y prodiamine a 840 g ai ha−1 fueron similares al testigo sin tratar. Las aplicaciones de indaziflam a 70 g ha−1 y prodiamine en el otoño redujeron el establecimiento de los estolones recién sembrados de las cuatro especies de césped en comparación con el control no tratado, pero oxadiazon y las dosis bajas de indaziflam fueron similares. El establecimiento del césped bermuda a partir de semilla fue reducido significativamente (20 a 50%) por indaziflam a 35 y 140 g ha−1, prodiamine, y oxadiazon, en varias fechas, pero la dosis baja de indaziflam fue similar el testigo sin tratar a 10 semanas después de la siembra. En general, las aplicaciones de indaziflam en el otoño a 17.5 a 35 g ha−1 parecen seguras para el establecimiento vegetativo en la primavera de cuatro especies de césped de clima cálido, pero el césped bermuda de resiembra en áreas tratadas con dosis >17.5 g ha−1 podría causar retrasos inaceptables en el crecimiento., [EN] Indaziflam is an effective PRE herbicide for annual bluegrass control, but soil residual effects could inhibit spring turf establishment in treated areas. To test this hypothesis, field experiments were conducted to evaluate establishment of bermudagrass, centipedegrass, St. Augustinegrass, and zoysiagrass after fall indaziflam applications. Lateral spread of turfgrasses from plugs in summer generally had no meaningful differences from treatments. However, high indaziflam rates (70 and 140 g ai ha(-1)) had approximately two-fold more nonrooted stolons than the nontreated control while low rates (17.5 and 35 g ha(-1)), oxadiazon at 3360 g ai ha(-1), and prodiamine at 840 g ai ha(-1) were similar to the nontreated. Indaziflam at 70 g ha(-1) and prodiamine applications in fall reduced sprig establishment of the four turf species from the nontreated control, but oxadiazon and low rates of indaziflam were similar. Bermudagrass establishment from seed was significantly reduced (20 to 50%) by indaziflam at 35 to 140 g ha(-1), prodiamine, and oxadiazon, on several dates, but the low rate of indaziflam was similar to the nontreated at 10 wk after seeding. Overall, fall indaziflam applications at 17.5 to 35 g ha(-1) appear safe on vegetative establishment of four warm-season turfgrasses in spring but reseeding bermudagrass in areas treated with rates > 17.5 g ha(-1) may cause unacceptable delays in growth., The authors would like to thank Bill Nutt, Seth Williams, Bob Perry, Silent Penn, Robin Landry, and Jeff Rutan for technical support and Bayer for partial support of this research. We would also like to thank the PAID-00-12, I + D Programe from the Universitat Politecnica de Valencia for supporting the sabbatical work of Diego Gomez de Barreda at the University of Georgia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Multifunctional PLA PHB/cellulose nanocrystal films: Processing, structural and thermal properties

  • ARRIETA, Marina Patricia
  • Fortunati, E.
  • Dominici, F.
  • Kenny, J. M.
  • E. Rayón|||0000-0002-0653-2046
  • López-Martínez, Juan|||0000-0001-6904-2282
Cellulose nanocrystals (CNCs) synthesized from microcrystalline cellulose by acid hydrolysis were added into poly(lactic acid)-poly(hydroxybutyrate) (PLA-PHB) blends to improve the final properties of the multifunctional systems. CNC were also modified with a surfactant (CNCs) to increase the interfacial adhesion in the systems maintaining the thermal stability. Firstly, masterbatch pellets were obtained for each formulation to improve the dispersion of the cellulose structures in the PLA-PHB and then nanocomposite films were processed. The thermal stability as well as the morphological and structural properties of nanocomposites was investigated. While PHB increased the PLA crystallinity due to its nucleation effect, well dispersed CNC and CNCs not only increased the crystallinity but also improved the processability, the thermal stability and the interaction between both polymers especially in the case of the modified CNCs based PLA-PHB formulation. Likewise, CNCs were better dispersed in PLA-CNCs and PLA-PHB-CNCs, than CNC. (C) 2014 Elsevier Ltd. All rights reserved., This research was supported by the Ministry of Science and Innovation of Spain (MAT2011-28468-C02-01 and MAT201128468-0O2-02). M.P. Arrieta thanks Generalitat Valenciana (Spain) for Santiago Grisolia Fellowship (GRISOLIA/2011/007) and Universitat Politecnica de Valencia for the Development Support Programme PAID-00-12 (SP20120120).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

The interoperability force in the ERP field

  • Boza, Andres|||0000-0002-5429-0416
  • Cuenca, L.|||0000-0003-3589-4182
  • Poler, R.|||0000-0003-4475-6371
  • Michaelides, Zenon
Enterprise resource planning (ERP) systems participate in interoperability projects and this participation sometimes leads to new proposals for the ERP field. The aim of this paper is to identify the role that interoperability plays in the evolution of ERP systems. To go about this, ERP systems have been first identified within interoperability frameworks. Second, the initiatives in the ERP field driven by interoperability requirements have been identified from two perspectives: technological and business. The ERP field is evolving from classical ERP as information system integrators to a new generation of fully interoperable ERP. Interoperability is changing the way of running business, and ERP systems are changing to adapt to the current stream of interoperability., This research has been carried out in the framework of the "Programa de Apoyo a la Investigacion y Desarrollo (PAID-00-12)' from the Universitat Politecnica de Valencia (Spain).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Dithiopyr Controls Common Lespedeza (Kummerowia striata) in Bermudagrass

  • Gómez De Barreda, Diego
  • Singh, Rashmi
  • Sidhu, Sudeep S.
  • McCullough, Patrick E.
[EN] Common lespedeza is a problematic summer annual weed in bermudagrass lawns, with limited PRE herbicides available for control. Dithiopyr is a pyridine herbicide primarily used for PRE grassy weed control but has shown potential efficacy for controlling annual legumes. The objectives of this research were to evaluate efficacy and behavior of dithiopyr in common lespedeza. In a 3-yr field experiment, sequential dithiopyr applications at 0.42 or 0.56 kg ai ha(-1) beginning in late winter and single applications of dithiopyr at 0.56 kg ai ha(-1) in spring controlled common lespedeza >= 88%. Single and sequential applications of indaziflam at 0.035 and 0.053 kg ai ha(-1) provided poor control (< 70%) of common lespedeza by late summer. In laboratory experiments, bermudagrass and common lespedeza had similar foliar absorption of C-14-dithiopyr, averaging 10% of the C-14 applied, and both species retained > 80% of C-14 in the treated leaf at 72 h after treatment (HAT). Common lespedeza translocated 6 times more root-absorbed C-14 to shoots than bermudagrass and had 2.8 times greater absorption (Bq mg(-1)) at 72 HAT. In metabolism experiments, parent herbicide levels measured >= 84% of extracted C-14 in both species at 1, 3, and 7 d after treatment. Overall, dithiopyr effectively controls common lespedeza in bermudagrass as a PRE treatment in spring. Susceptibility of common lespedeza to dithiopyr is associated with acropetal translocation and greater herbicide concentrations compared with a tolerant species, bermudagrass., The authors thank Seth Williams for technical assistance with this research, and Anita Alexander from Dow Agrosciences for support with field experiments and providing radiolabeled dithiopyr. We also thank the PAID-00-12, I + D Programe from the Universitat Politecnica de Valencia for supporting the sabbatical work of D.G. at the University of Georgia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Composition of antioxidants and amino acids in stevia leaf infusions

  • Periche Santamaría, Angela
  • Koutsidis, Georgios
  • Escriche Roberto, Mª Isabel|||0000-0003-0180-0360
Stevia, a non-caloric natural sweetener with beneficial properties and considerable antioxidants and amino acids, is increasingly consumed as an infusion. This work evaluates the influence of the conditions (temperature: 50, 70 or 90 A degrees C and time: 1, 5, 20 or 40 min) applied to obtain Stevia infusions, on antioxidants (total phenols, flavonoids and antioxidant activity) and amino acids. The total concentration of the eleven amino acids found was 11.70 mg/g in dried leaves and from 6.84 to 9.11 mg/g per gram of Stevia in infusions. However, infusions showed higher levels of certain amino acids (alanine, asparagine, leucine and proline), and greater values of the three antioxidant parameters in comparison with dry leaves. Temperature had more influence (minimum values at 50 A degrees C and maximum at 90 A degrees C) than time in the case of antioxidants. At 90 A degrees C there were no important increases in the extraction of antioxidant compounds after 5 min; each gram of Stevia had 117 mg trolox (total antioxidant activity), 90 mg gallic acid (total phenols) and 56 mg catechin equivalents (flavonoids). Varying the temperature and time conditions no notable differences were observed in the concentrations of the majority of amino acids. However, the infusion treatment at 90 A degrees C for 5 min was the best, as it gave the highest yield of 8 of the 11 amino acids. Therefore, with respect to the compounds analyzed in this study, the best way to obtain Stevia leaf infusions is the same as the domestic process, almost boiling water for a short time., The authors thank the Research and Development Support Program, "Ayuda a Estancias de personal docente e investigador de la UPV en Centros de Investigacion de Prestigio (PAID-00-12)" of the Universidad Politecnica de Valencia (Spain).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Development and validation of a weather-based model for predicting infection of loquat fruit by Fusicladium eriobotryae

  • González Domínguez, Elisa
  • Rossi, Vittorio
  • Armengol Fortí, Josep|||0000-0003-3815-8578
A mechanistic, dynamic model was developed to predict infection of loquat fruit by conidia of Fusicladium eriobotryae, the causal agent of loquat scab. The model simulates scab infection periods and their severity through the sub-processes of spore dispersal, infection, and latency (i.e., the state variables); change from one state to the following one depends on environmental conditions and on processes described by mathematical equations. Equations were developed using published data on F. eriobotryae mycelium growth, conidial germination, infection, and conidial dispersion pattern. The model was then validated by comparing model output with three independent data sets. The model accurately predicts the occurrence and severity of infection periods as well as the progress of loquat scab incidence on fruit (with concordance correlation coefficients .0.95). Model output agreed with expert assessment of the disease severity in seven loquatgrowing seasons. Use of the model for scheduling fungicide applications in loquat orchards may help optimise scab management and reduce fungicide applications., This work was funded by Cooperativa Agricola de Callosa d'En Sarria (Alicante, Spain). Three months' stay of E. Gonzalez-Dominguez at the Universita Cattolica del Sacro Cuore (Piacenza, Italy) was supported by the Programa de Apoyo a la Investigacion y Desarrollo (PAID-00-12) de la Universidad Politecnica de Valencia. The funders had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Automated milling path tracking and CAM-ROB integration for industrial redundant manipulators

  • Gracia Calandin, Luis Ignacio|||0000-0001-9258-9286
  • Gracia Calandin, Carlos Pablo|||0000-0002-8589-2452
  • Andrés de la Esperanza, Francisco Javier
[EN] The present paper explores the industrial capabilities of a CAM¿]ROB system implementation based on a commercial CAD/CAM system (NXTM) for an industrial robotic workcell of eight joints, committed to the rapid prototyping of 3D CAD¿]defined models. The workcell consists of a KUKATM KR15/2 manipulator assembled on a linear track and synchronized with a rotary table. A redundancy resolution scheme is developed to deal with the redundancies due to the additional joints of the robot, plus the one from the symmetry axis of the milling tool. During the path tracking, the use of these redundancies is optimized by adjusting two performance criterion vectors related to singularity avoidance and maintenance of a preferred reference posture, as secondary tasks to be done. In addition, two suitable fuzzy inference engines adjust the weight of each joint in these tasks. The developed system is validated in a real prototyping of a carving., This research is partially supported by research project DPI2009-14744-C03-01 of the Spanish Government, project PROMETEO 2009/063 of Generalitat Valenciana, and research projects PAID-05-11-2640 and PAID-00-12-SP20120159 of the Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Seedling Tolerance of Cool-Season Turfgrasses to Metamifop

  • Gómez De Barreda, Diego
  • Yu, Jialin
  • McCullough, Patrick E.
[EN] Grassy weeds may reduce cool-season turfgrass establishment after seeding and herbicide use is often warranted. Field experiments were conducted to evaluate the tolerance of creeping bentgrass (Agrostis stolonifera L.), perennial ryegrass (Lolium perenne L.), and tall fescue (Festuca arundinacea Schreb.) to fenoxaprop and metamifop applications at 1, 2, 3, or 4 weeks after seeding (WAS). Creeping bentgrass groundcover was reduced from 34% to 71% at 8 WAS from the nontreated by fenoxaprop at 50 g a.i./ha and metamifop at 400 and 800 g a.i./ha at all application timings. Metamifop at 200 g·haL1 reduced creeping bentgrass cover 10% to 18% from the nontreated at 8 WAS when applied 1, 2, or 3 WAS, but treatments at 4 WAS did not reduce cover. Perennial ryegrass treated with fenoxaprop and metamifop at 800 g·haL1 at 1 WAS had cover reduced from the nontreated on two and one dates, respectively, whereas tall fescue cover was never reduced greater than 5% from the nontreated. Results suggest applications to creeping bentgrass should be delayed greater than 4 WAS for fenoxaprop at 50 g·haL1 , greater than 4 WAS for metamifop at 400 and 800 g·haL1 , and 3 WAS for metamifop at 200 g·haL1 . Additionally, fenoxaprop applications should be delayed 2 WAS for perennial ryegrass and tall fescue, whereas metamifop could be safely applied at all rates at 1 WAS., We thank Bill Nutt, Seth Williams, and Bob Perry for technical support with this research. We also thank the PAID-00-12, I + D Programe from the Universitat Politecnica de Valencia for supporting the sabbatical work of Diego Gomez de Barreda at the University of Georgia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

PLA-PHB/cellulose based films: Mechanical, barrier and disintegration properties

  • Arrieta, Marina Patricia
  • Fortunati, E.
  • Dominici, F.
  • Kenny, J. M.
  • E. Rayón|||0000-0002-0653-2046
  • López-Martínez, Juan|||0000-0001-6904-2282
Nanocomposite films based on poly(lactic acid)-poly(hydroxybutyrate) (PLA-PHB) blends and synthesized cellulose nanocrystals (CNC) or surfactant modified cellulose nanocrystals (CNCs), as bio-based reinforcement, were prepared by melt extrusion followed by film forming. The obtained nanocomposites are intended for short-term food packaging. Thus, the mechanical, optical, barrier and wettability properties were studied. Functionalized CNCs contribute to enhance the interfacial adhesion between PLA and PHB, leading to improved mechanical stiffness and increased film stretchability. The synergic effects of the PHB and CNCs on the PLA barrier properties were confirmed by increases in oxygen barrier properties and reductions in surface wettability of the nanocomposites. In addition, the measurements of the viscosity molecular weight for ternary systems showed practically no degradation of PLA and smaller degradation of PHB during processing due to nanocrystal presence. The disintegration process in composting conditions of PLA was delayed by the addition of PHB, while CNC speeded it up. PLA-PHB-CNCs formulations showed enhanced mechanical performance, improved water resistance, reduced oxygen and UV-light transmission, as well as appropriate disintegration in compost suggesting possible applications as packaging materials. (C) 2014 Elsevier Ltd. All rights reserved., This research was supported by the Ministry of Science and Innovation of Spain (MAT2011-28468-C02-01 and MAT2011-28468-C02-02). M.P. Arrieta thanks Generalitat Valenciana (Spain) for Santiago Grisolia Fellowship (GRISOLIA/2011/007) and Universitat Politecnica de Valencia for the Development Support Programme PAID-00-12 (SP20120120). The Authors acknowledge Gesenu S.p.a. for compost supply. Authors gratefully thank Prof. Alfonso Jimenez (University of Alicante, Spain) and Prof. Maria Dolores Salvador Moya (Universitat Politecnica de Valencia) for their assistance with OTR measurements and optical microscope-EDF measurements, respectively.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A non-uniform multi-rate control strategy for a Markov chain-driven Networked Control System

  • Cuenca, Ángel|||0000-0003-4466-2666
  • Salt Llobregat, Julián José|||0000-0002-9640-2658
  • Ojha, Unnati
  • Chow, Mo-Yuen
[EN] In this work, a non-uniform multi-rate control strategy is applied to a kind of Networked Control System (NCS) where a wireless path tracking control for an Unmanned Ground Vehicle (UGV) is carried out. The main aims of the proposed strategy are to face time-varying network-induced delays and to avoid packet disorder. A Markov chain-driven NCS scenario will be considered, where different network load situations, and consequently, different probability density functions for the network delay are assumed. In order to assure mean-square stability for the considered NCS, a decay-rate based sufficient condition is enunciated in terms of probabilistic Linear Matrix Inequalities (LMIs). Simulation results show better control performance, and more accurate path tracking, for the scheduled (delay-dependent) controller than for the non-scheduled one (i.e. the nominal controller when delays appear). Finally, the control strategy is validated on an experimental test-bed., This work was supported in part by Grants TEC2012-31506 from the Spanish Ministry of Education, DPI2011-28507-C02-01 by the Spanish Ministry of Economy, and PAID-00-12 from Technical University of Valencia (Spain). In addition, this research work has been developed as a result of a mobility stay funded by the Erasmus Mundus Programme of the European Commission under the Transatlantic Partnership for Excellence in Engineering (TEE Project).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Integrated sliding-mode algorithms in robot tracking applications

  • Gracia Calandin, Luis Ignacio|||0000-0001-9258-9286
  • Sala, Antonio|||0000-0002-5691-8772
  • Garelli, Fabricio
An integrated solution based on sliding mode ideas is proposed for robotic trajectory tracking. The proposal includes three sliding-mode algorithms for speed auto-regulation, path conditioning and redundancy resolution in order to fulfill velocity, workspace and C-space constraints, respectively. The proposed method only requires a few program lines and simplifies the robot user interface since it directly deals with the fulfillment of the constraints to find a feasible solution for the robot trajectory tracking in a short computation time. The proposed approach is evaluated in simulation on the freely accessible 6R robot model PUMA-560, for which the main features of the method are illustrated., This research is partially supported by research project DPI2011-27845-C02-01 of the Spanish Government (Spain), research projects PAID-05-11-2640 and PAID-00-12-SP20120159 of the Universitat Polit'ecnica de Val'encia (Spain), and research projects ANPCyT PICT-2011-0888, CONICET PIP 112-2011-00361, and UNLP 1164 (Argentina).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Discrete time analysis of cognitive radio networks with imperfect sensing and saturated source of secondary users, Computer Communications

  • Alfa, A. S.
  • Pla, Vicent|||0000-0002-0894-9494
  • Martínez Bauset, Jorge|||0000-0003-3342-3037
  • Casares-Giner, Vicente|||0000-0002-6947-8470
Sensing is one of the most challenging issues in cognitive radio networks. Selection of sensing parameters raises several tradeoffs between spectral efficiency, energy efficiency and interference caused to primary users (PUs). In this paper we provide representative mathematical models that can be used to analyze sensing strategies under a wide range of conditions. The activity of PUs in a licensed channel is modeled as a sequence of busy and idle periods, which is represented as an alternating Markov phase renewal process. The representation of the secondary users (SUs) behavior is also largely general: the duration of transmissions, sensing periods and the intervals between consecutive sensing periods are modeled by phase type distributions, which constitute a very versatile class of distributions. Expressions for several key performance measures in cognitive radio networks are obtained from the analysis of the model. Most notably, we derive the distribution of the length of an effective white space; the distributions of the waiting times until the SU transmits a given amount of data, through several transmission epochs uninterruptedly; and the goodput when an interrupted SU transmission has to be restarted from the beginning due to the presence of a PU. (C) 2015 Elsevier B.V. All rights reserved., The research of A. S. Alfa was partially supported by the NSERC (Natural Sciences and Engineering Research Council) of Canada under Grant G00315156. Most of the contribution of V. Pla was done while visiting the University of Manitoba. This visit was supported by the Ministerio de Educacion of Spain under Grant PR2011-0055, and by the UPV through the Programa de Apoyo a la Investigacion y Desarrollo (PAID-00-12). The research of the authors from the Universitat Politecnica de Valencia was partially supported by the Ministry of Economy and Competitiveness of Spain under Grant TIN2013-47272-C2-1-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Do Different Models Induce Changes in Mortality Indicators? That Is a Key Question for Extending the Lee-Carter Model

  • Debón, A.|||0000-0002-5116-289X
  • Haberman, Steven
  • Montes Suay, Francisco
  • Otranto, Edoardo
[EN] The parametric model introduced by Lee and Carter in 1992 for modeling mortality rates in the USA was a seminal development in forecasting life expectancies and has been widely used since then. Different extensions of this model, using different hypotheses about the data, constraints on the parameters, and appropriate methods have led to improvements in the model's fit to historical data and the model's forecasting of the future. This paper's main objective is to evaluate if differences between models are reflected in different mortality indicators' forecasts. To this end, nine sets of indicator predictions were generated by crossing three models and three block-bootstrap samples with each of size fifty. Later the predicted mortality indicators were compared using functional ANOVA. Models and block bootstrap procedures are applied to Spanish mortality data. Results show model, block-bootstrap, and interaction effects for all mortality indicators. Although it was not our main objective, it is essential to point out that the sample effect should not be present since they must be realizations of the same population, and therefore the procedure should lead to samples that do not influence the results. Regarding significant model effect, it follows that, although the addition of terms improves the adjustment of probabilities and translates into an effect on mortality indicators, the model's predictions must be checked in terms of their probabilities and the mortality indicators of interest., This research was funded by "Jose Castillejo" Program from Ministerio de Educacion grant number JC2011-0169, by Universitat Politecnica de Valencia (PAID-00-12), and the Faculty of Business Administration
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Gravitational frequency shifts in transformation acoustics

  • Tung, Michael Ming-Sha|||0000-0002-8760-0927
  • Weinmüller, Ewa Barbara
In metamaterial acoustics, it is conceivable that any type of fine-tuned acoustic properties far beyond those found in nature may be transferred to an appropriate medium. Effective design and engineering of these modern acoustic metadevices poses one of the forefront challenges in this field. As a practical example of a new covariant approach for modelling acoustics on spacetime manifolds, we choose to implement the acoustic analogue of the frequency shift due to gravitational time dilation. In accordance with Einstein's equivalence principle, two different spacetimes, corresponding to uniform acceleration or uniform gravity, are considered. For wave propagation in a uniformly accelerating rigid frame, an acoustic event horizon arises. The discussion includes a detailed numerical analysis for both spacetime geometries. Copyright (c) EPLA, 2013, MMT wishes to thank MARKUS SCHOBINGER for an introduction to the SBVP MATLAB solver and acknowledges partial support by the Universidad Politecnica de Valencia (PAID-00-12) and the International Office of the Vienna University of Technology.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effect of environmental factors on mycelial growth and conidial germination of Fusicladium eriobotryae, and the infection of loquat leaves

  • González Domínguez, Elisa
  • Rossi, V.
  • García Jiménez, José
  • Armengol Fortí, Josep|||0000-0003-3815-8578
[EN] In Spain, loquat scab, caused by Fusicladium eriobotryae, is usually controlled by fungicides when there are favorable conditions for infection. Lacking specific data on the effect of weather conditions on infection by F. eriobotryae, infection periods are predicted based on the Mills table for apple scab. Experiments were conducted to determine the influence of temperature, wetness duration, relative humidity (RH), and dry periods on mycelial growth, conidial germination, and infection of loquat leaves by F. eriobotryae. F. eriobotryae was able to grow and the conidia to germinate in a wide range of temperatures, whereas no germination occurred at RH < 100%. Maximum conidial germination occurred with 24 h of wetness and germination was strongly reduced by >10 h of dryness interrupting the wetness period. Loquat infection occurred between 10 and 20°C, and disease incidence and severity increased as the duration of wetness period increased. The combined effect of temperature and wetness duration on conidial germination of F. eriobotryae and infection of leaves was described by combining β and Gompertz equations, while the effect of dry periods on reducing the conidial germination was described by a logarithmic equation. The equations developed in this work provided a reasonable fit of the biological processes investigated and could be used for better disease control; they could be further integrated in a disease prediction system for scheduling fungicide sprays against loquat scab., This work was funded by Cooperativa Agricola de Callosa d'En Sarria (Alicante, Spain). Financial support by the Programa de Apoyo a la Investigacion y Desarrollo (PAID-00-12) de la Universidad Politecnica de Valencia for E. Gonzalez-Dominguez during her 3 months' stay at the Universita Cattolica del Sacro Cuore (Piacenza, Italy) is gratefully acknowledged. We thank E. Soler for his technical assistance.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Dispersal of conidia of Fusicladium eriobotryae and spatial patterns of scab in loquat orchards in Spain

  • González Domínguez, Elisa
  • Rossi, Vittorio
  • Michereff, Sami Jorge
  • García Jiménez, José
  • Armengol Fortí, Josep|||0000-0003-3815-8578
[EN] Dispersal of conidia of Fusicladium eriobotryae, the causal agent of loquat scab, was investigated in two loquat orchards in Spain from 2010 to 2012. A volumetric spore sampler, horizontally and vertically orientated microscope slides, and rain collectors were placed in loquat fields to trap conidia of F. eriobotryae. No conidia were collected in the volumetric sampler, and highly variable numbers of conidia were collected in the rain gatherers. Large numbers of conidia were collected by microscope slides, particularly by those held in a horizontal orientation compared with those held in a vertical orientation. Approximately 90 % of the F. eriobotryae conidia were collected during rainy periods. Based on ROC and Bayesian analysis, using a parts per thousand yen 0.2 mm rainfall as a cut-off value resulted in a high probability of correctly predicting actual conidial dispersal, and had a low probability of failing to predict actual conidial dispersal. Based on the index of dispersion and the binary power law, the incidence of loquat scab on fruit was highly aggregated in space between and within trees, and aggregation was influenced by disease incidence. Our results demonstrate, for the first time, that F. eriobotryae is dispersed mainly in rain splash. The results will be integrated into a mechanistic, weather-driven, disease prediction model that should help growers to minimize fungicide application for the management of loquat scab., This work was funded by the Cooperativa Agricola de Callosa d'En Sarria (Alicante, Spain). Financial support by the Programa de Apoyo a la Investigacion y Desarrollo (PAID-00-12) de la Universidad Politecnica de Valencia for E. Gonzalez-Dominguez during her 3-month stay at the Universita Cattolica del Sacro Cuore (Piacenza, Italy) is gratefully acknowledged. We would like to thank E. Soler, A. Perez and J.J. Giner for their technical assistance.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Layer-by-Layer Modification of Cation Exchange Membranes Controls Ion Selectivity and Water Splitting

  • Abdu, Said
  • Wong, John Erik
  • Wessling, Matthias
  • Martí Calatayud, Manuel César|||0000-0002-0745-1918
  • García Gabaldón, Montserrat|||0000-0003-4254-6733
The present study investigates the possibility of inducing monovalent ion permselectivity on standard cation exchange membranes, by the layer-by-layer (LbL) assembly of poly(ethyleneimine) (PEI)/poly(styrenesulfonate) (PSS) polyelectrolyte multilayers. Coating of the (PEI/PSS)N LbL multilayers on the CMX membrane caused only moderate variation of the ohmic resistance of the membrane systems. Nonetheless, the polyelectrolyte multilayers had a substantial influence on the monovalent ion permselectivity of the membranes. Permselectivity comparable to that of a commercial monovalent-ion-permselective membrane was obtained with only six bilayers of polyelectrolytes, yet with significantly lower energy consumption per mole of Na+ ions transported through the membranes. The monovalent ion permselectivity stems from an increased Donnan exclusion for divalent ions and hydrophobization of the surface of the membranes concomitant to their modification. Double-layer capacitance obtained from impedance measurements shows a qualitative indication of the divalent ion repulsion of the membranes. At overlimiting current densities, water dissociation occurred at membranes with PEI-terminated layers and increased with the number of layers, while it was nearly absent for the PSS-terminated layers. Hence, LbL layers allow switching on and turning off water splitting at the surface of ion exchange membranes., The authors from Germany acknowledge support through the German Research Foundation (DFG) grant - SFB 985 "Functional Microgels and Microgel Systems". M.C. Marti-Calatayud is grateful to the Universitat Politecnica de Valencia for his postgraduate (Ref.: 2010-12) and visiting scientist grant (PAID-00-12). M. Wessling appreciates financial support from the Alexander-von-Humboldt Foundation.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Selectivity of Methiozolin for Annual Bluegrass (Poa annua) Control in Creeping Bentgrass as Influenced by Temperature and Application Timing

  • McCullough, Patrick E.
  • Gómez De Barreda, Diego
  • Yu, Jialin
[EN] Methiozolin controls annual bluegrass in creeping bentgrass but application timing and temperature could influence efficacy in turf. In field experiments, sequential methiozolin applications totaling 3.36 kg ai ha(-1) provided excellent (> 90%) annual bluegrass control at 8 wk after initial treatment when treatments were initiated in February/March or May but programs totaling 0.84 and 1.68 kg ha(-1) provided poor control (< 70%) at both timings. Methiozolin at all rates caused minimal turf injury (< 8%) but creeping bentgrass was only injured from February/March applications. In growth chamber experiments, creeping bentgrass injury from methiozolin at 10 C was 2 and 4 times greater than at 20 C and 30 C, respectively, while annual bluegrass injury was similar across temperatures. In laboratory experiments, annual bluegrass had more foliar absorption of C-14-methiozolin than creeping bentgrass at 30/25 C (day/night), compared to 15/10 C, but translocation was similar at both temperatures as > 90% of absorbed C-14 remained in the treated leaf after 72 h. Annual bluegrass distributed and recovered more radioactivity to shoots from root-applied C-14-methiozolin than creeping bentgrass while both species had about 2 times more distribution to shoots at 30/25 C than 15/10 C. Metabolites were not detected in annual bluegrass or creeping bentgrass at 1, 3, or 7 d after treatment when grown at 15/10 C or 30/25 C suggesting uptake and translocation contributes to methiozolin selectivity in turfgrass, The authors would like to thank Bill Nutt, Seth Williams, Fred Brubaker, Harold Ammons, Dr. Qingguo Huang, Dr. Bill Vencill, and Dr. Tim Grey for technical support with this research and Dr. Suk-Jin Koo at Moghu Corp. for providing radiolabeled methiozolin and supporting the work. We would also like to thank the PAID-00-12, I + D Programe from the Universitat Politecnica de Valencia for supporting the sabbatical work of Diego Gomez de Barreda at the University of Georgia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effect of silane coupling agents on basalt fiber-epoxidized vegetable oil matrix composite materials analyzed by the single fiber fragmentation technique

  • Samper, María-Dolores|||0000-0002-5102-8412
  • Sanchez-Nacher, Lourdes|||0000-0002-8627-4576
  • Balart, Rafael|||0000-0001-5670-7126
  • Petrucci, R.
  • Kenny, J. M.
The fiber-matrix interfacial shear strength (IFSS) of biobased epoxy composites reinforced with basalt fiber was investigated by the fragmentation method. Basalt fibers were modified with four different silanes, (3-aminopropyl)trimethoxysilane, [3-(2-aminoethylamino)propyl]-trimethoxysilane, trimethoxy[2-(7-oxabicyclo[4.1.0]hept-3-yl)ethyl]silane and (3-glycidyloxypropyl)trimethoxysilane to improve the adhesion between the basalt fiber and the resin. The analysis of the fiber tensile strength results was performed in terms of statistical parameters. The tensile strength of silane-treated basalt fiber is higher than the tensile strength of the untreated basalt fiber; this behavior may be due to flaw healing effect on the defected fiber surfaces. The IFSS results on the composites confirm that the interaction between the fiber modified with coupling agents and the bio-based epoxy resin was much stronger than that with the untreated basalt fiber. POLYM. COMPOS., 36:1205-1212, 2015. (c) 2014 Society of Plastics Engineers, Contract grant sponsor: Programme Support Research and Development (Polytechnic University of Valencia); contract grant number: PAID-00-12.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Isothermal solid-phase recombinase polymerase amplification on microfluidic digital versatile discs (DVDs)

  • Tortajada-Genaro, Luis Antonio|||0000-0003-4021-5607
  • Maquieira, Angel|||0000-0003-4641-4957
  • Santiago Felipe, Sara
  • Amasia, Mary
  • Russom, Aman
[EN] A new advancement in massive DNA-based screening in limited-resource settings is demonstrated through the incorporation of easy-to-fabricate microfluidic chambers on digital versatile discs (DVDs) to perform isothermal recombinase polymerase amplification (RPA) in a microarray format. Standard un-modified DVD discs and commercial drives are used for the low-cost detection method. DNA primers were printed in a microarray format on the polycarbonate surfaces of DVDs with integrated control spots to guarantee the absence of false-negatives and false-positives. The solid-phase amplification assay, including the washing protocols and development reaction, was performed by the dispensation of solutions through the inlet and by controlling the flow-movement by DVD drive centrifugation. The final disc with reaction products was inserted into a DVD player and microarray images were captured and automatically processed. This simple approach was applied for the screening of genetically modified organisms (GMOs) in food samples. The limit of detection was 7 mu g g(-1), which is well below the EU regulation limit for GMOs in food products. Therefore, the only required materials for food safety monitoring were standard store-bought DVDs, plastic chambers, tips, pipettes, an oven, and a standard DVD drive. The proposed strategy allows an integrated microarray system with low manipulation, reduced sample volume, and portability, which are beneficial for low-resource settings., This research has been funded through the projects FP7 Digital sequencing (European Commission), PAID-00-12 (UPV, GVA), FEDER PrometeoII/2014/040 (GVA) and CTQ/2013/45875 R (MINECO). The Spanish Ministry of Education and Science provided S.S.F. with a grant for her PhD studies.