Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Reactive Sliding-Mode Algorithm for Collision Avoidance in Robotic Systems

  • Gracia Calandin, Luis Ignacio|||0000-0001-9258-9286
  • Sala, Antonio|||0000-0002-5691-8772
  • Garelli, Fabricio
This brief presents a reactive reference conditioning algorithm for robot collision avoidance based on geometric invariance and sliding-mode (SM) ideas. First, constraints are defined in terms of the measurements given by the robot s sensors in order to guarantee that collisions will not occur. Then, a supervisory loop ensures the fulfillment of the constraints modifying the reference trajectory as much as necessary by means of a discontinuous control law. The proposed algorithm activates only when the constraints are about to be violated and, thus, in contrast to conventional SM approaches, there exists no reaching mode to the limit surface of the constraints (sliding surface). The validity and effectiveness of the proposed approach is substantiated by simulation and experimental results using a mobile robot equipped with infrared sensors., This work was supported in part by research under Project DPI2011-27845-C02-01 (Spanish Government), Projects PAID-05-11-2640, and PAID-00-12-SP20120159, (Universitat Politecnica de Valencia, Spain), and Projects ANPCyT PICT-2011-0888, CONICET PIP 112-2011-00361, and UNLP I164 in Argentina. Recommended by Associate Editor M. Zefran.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Automated milling path tracking and CAM-ROB integration for industrial redundant manipulators

  • Gracia Calandin, Luis Ignacio|||0000-0001-9258-9286
  • Gracia Calandin, Carlos Pablo|||0000-0002-8589-2452
  • Andrés de la Esperanza, Francisco Javier
[EN] The present paper explores the industrial capabilities of a CAM¿]ROB system implementation based on a commercial CAD/CAM system (NXTM) for an industrial robotic workcell of eight joints, committed to the rapid prototyping of 3D CAD¿]defined models. The workcell consists of a KUKATM KR15/2 manipulator assembled on a linear track and synchronized with a rotary table. A redundancy resolution scheme is developed to deal with the redundancies due to the additional joints of the robot, plus the one from the symmetry axis of the milling tool. During the path tracking, the use of these redundancies is optimized by adjusting two performance criterion vectors related to singularity avoidance and maintenance of a preferred reference posture, as secondary tasks to be done. In addition, two suitable fuzzy inference engines adjust the weight of each joint in these tasks. The developed system is validated in a real prototyping of a carving., This research is partially supported by research project DPI2009-14744-C03-01 of the Spanish Government, project PROMETEO 2009/063 of Generalitat Valenciana, and research projects PAID-05-11-2640 and PAID-00-12-SP20120159 of the Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Integrated sliding-mode algorithms in robot tracking applications

  • Gracia Calandin, Luis Ignacio|||0000-0001-9258-9286
  • Sala, Antonio|||0000-0002-5691-8772
  • Garelli, Fabricio
An integrated solution based on sliding mode ideas is proposed for robotic trajectory tracking. The proposal includes three sliding-mode algorithms for speed auto-regulation, path conditioning and redundancy resolution in order to fulfill velocity, workspace and C-space constraints, respectively. The proposed method only requires a few program lines and simplifies the robot user interface since it directly deals with the fulfillment of the constraints to find a feasible solution for the robot trajectory tracking in a short computation time. The proposed approach is evaluated in simulation on the freely accessible 6R robot model PUMA-560, for which the main features of the method are illustrated., This research is partially supported by research project DPI2011-27845-C02-01 of the Spanish Government (Spain), research projects PAID-05-11-2640 and PAID-00-12-SP20120159 of the Universitat Polit'ecnica de Val'encia (Spain), and research projects ANPCyT PICT-2011-0888, CONICET PIP 112-2011-00361, and UNLP 1164 (Argentina).