Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Reactive Sliding-Mode Algorithm for Collision Avoidance in Robotic Systems

  • Gracia Calandin, Luis Ignacio|||0000-0001-9258-9286
  • Sala, Antonio|||0000-0002-5691-8772
  • Garelli, Fabricio
This brief presents a reactive reference conditioning algorithm for robot collision avoidance based on geometric invariance and sliding-mode (SM) ideas. First, constraints are defined in terms of the measurements given by the robot s sensors in order to guarantee that collisions will not occur. Then, a supervisory loop ensures the fulfillment of the constraints modifying the reference trajectory as much as necessary by means of a discontinuous control law. The proposed algorithm activates only when the constraints are about to be violated and, thus, in contrast to conventional SM approaches, there exists no reaching mode to the limit surface of the constraints (sliding surface). The validity and effectiveness of the proposed approach is substantiated by simulation and experimental results using a mobile robot equipped with infrared sensors., This work was supported in part by research under Project DPI2011-27845-C02-01 (Spanish Government), Projects PAID-05-11-2640, and PAID-00-12-SP20120159, (Universitat Politecnica de Valencia, Spain), and Projects ANPCyT PICT-2011-0888, CONICET PIP 112-2011-00361, and UNLP I164 in Argentina. Recommended by Associate Editor M. Zefran.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

CAM-Rob postprocessor based on a fuzzified redundancy resolution scheme

  • Andrés de la Esperanza, Francisco Javier
  • Gracia Calandin, Luis Ignacio|||0000-0001-9258-9286
  • Tornero Montserrat, Josep|||0000-0003-1571-0251
This work highlights the applicability of different redundancy resolution schemes to the postprocessing stage from a computer-aided manufacturing (CAM) system to an industrial redundant workcell. The inverse kinematic problem for redundant manipulators is not straightforward and, therefore, it is commonly solved using an iteratively approach based on redundant resolution schemes at the velocity level. In this work, two conceptions of redundancy resolution schemes are evaluated and a novel fuzzy inference system is developed to improve the performance during the toolpath tracking in order to avoid singularities and to maintain a preferred reference posture. For this purpose, the fuzzy inference engine properly adjusts the weight of each joint in the calculation of the performance criterion vectors. The proposed approach is validated in the real prototyping of a windmill blademold using a KUKA KR15/2manipulator mounted on a linear track and synchronized with a rotary table. To the authors knowledge, the proposed method and the results shown are novel in the context of postprocessing techniques from CAM systems to industrial robots devoted to milling works. With the same guidelines, the postprocessor programmed inside the CAM system is expected to be easily applicable not only to other industrial robots, but also for different applications such as welding or painting labors., This research is partially supported by the Technical University of Valencia (PAID-00-09-3092, PAID-05-11-2640), project PROMETEO 2009/063 of Generalitat Valenciana and research project DPI2009-14744-C03-01 of the Spanish Government.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Automated milling path tracking and CAM-ROB integration for industrial redundant manipulators

  • Gracia Calandin, Luis Ignacio|||0000-0001-9258-9286
  • Gracia Calandin, Carlos Pablo|||0000-0002-8589-2452
  • Andrés de la Esperanza, Francisco Javier
[EN] The present paper explores the industrial capabilities of a CAM¿]ROB system implementation based on a commercial CAD/CAM system (NXTM) for an industrial robotic workcell of eight joints, committed to the rapid prototyping of 3D CAD¿]defined models. The workcell consists of a KUKATM KR15/2 manipulator assembled on a linear track and synchronized with a rotary table. A redundancy resolution scheme is developed to deal with the redundancies due to the additional joints of the robot, plus the one from the symmetry axis of the milling tool. During the path tracking, the use of these redundancies is optimized by adjusting two performance criterion vectors related to singularity avoidance and maintenance of a preferred reference posture, as secondary tasks to be done. In addition, two suitable fuzzy inference engines adjust the weight of each joint in these tasks. The developed system is validated in a real prototyping of a carving., This research is partially supported by research project DPI2009-14744-C03-01 of the Spanish Government, project PROMETEO 2009/063 of Generalitat Valenciana, and research projects PAID-05-11-2640 and PAID-00-12-SP20120159 of the Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Integrated sliding-mode algorithms in robot tracking applications

  • Gracia Calandin, Luis Ignacio|||0000-0001-9258-9286
  • Sala, Antonio|||0000-0002-5691-8772
  • Garelli, Fabricio
An integrated solution based on sliding mode ideas is proposed for robotic trajectory tracking. The proposal includes three sliding-mode algorithms for speed auto-regulation, path conditioning and redundancy resolution in order to fulfill velocity, workspace and C-space constraints, respectively. The proposed method only requires a few program lines and simplifies the robot user interface since it directly deals with the fulfillment of the constraints to find a feasible solution for the robot trajectory tracking in a short computation time. The proposed approach is evaluated in simulation on the freely accessible 6R robot model PUMA-560, for which the main features of the method are illustrated., This research is partially supported by research project DPI2011-27845-C02-01 of the Spanish Government (Spain), research projects PAID-05-11-2640 and PAID-00-12-SP20120159 of the Universitat Polit'ecnica de Val'encia (Spain), and research projects ANPCyT PICT-2011-0888, CONICET PIP 112-2011-00361, and UNLP 1164 (Argentina).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A path conditioning method with trap avoidance

  • Gracia Calandin, Luis Ignacio|||0000-0001-9258-9286
  • Sala, Antonio|||0000-0002-5691-8772
  • Garelli, Fabricio
This work presents a sliding-mode method for robotic path conditioning. The proposal includes a trap avoidance algorithm in order to escape from trap situations, which are analogous to local minima in potential field-based approaches. The sliding-mode algorithm activates when the desired path is about to violate the robot workspace constraints, modifying it as much as necessary in order to fulfill all the constraints and reaching their limit surface at low speed. The proposed path conditioning algorithm can be used on-line, since it does not require a priori knowledge of the desired path, and improves the conventional conservative potential field-based approach in the sense that it fully exploits the robot workspace. The proposed approach can be easily added as an auxiliary supervisory loop to conventional robotic planning algorithms and its implementation is very easy in a few program lines of a microprocessor. The proposed path conditioning is compared through simulation with the conventional potential field-based approach in order to show the benefits of the method. Moreover, the effectiveness of the proposed trap avoidance algorithm is evaluated by simulation for various trap situations., This research is partially supported by DISICOM project PROM-ETEO 2008/088 of Generalitat Valenciana (Spain), research project DPI2011-27845-C02-01 of the Spanish Government (Spain), research project PAID-05-11-2640 of the Technical University of Valencia (Spain), and the Argentinian Government (UNLP 11I127, CONICET PIP 112-200801-0, ANPCyT PICT 2007 00535).