Pasar al contenido principal

DISEÑO DE UN VEHICULO DE INSPECCION SUBMARINA AUTONOMA PARA MISIONES OCEANOGRAFICAS: GRUPO DE INVESTIGACION IDF-UPV

DPI2009-14744-C03-01

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación Fundamental no Orientada
Convocatoria Proyectos I+D
Año convocatoria 2009
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Subdirección General de Proyectos de Investigación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA
Identificador persistente http://dx.doi.org/10.13039/501100004837

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Implementation and testing of a CAM postprocessor for an industrial redundant workcell with evaluation of several fuzzified Redundancy Resolution Schemes

  • Andrés de la Esperanza, Francisco Javier
  • Gracia Calandin, Luis Ignacio|||0000-0001-9258-9286
  • Tornero Montserrat, Josep|||0000-0003-1571-0251
This paper describes the implementation of a postprocessor to adapt the toolpath generated by a CAM system (NXTM) to a complex workcell of eight joints (namely, a KUKA KR15/2 manipulator mounted on a linear track and synchronized with a rotary table), devoted to the rapid prototyping of 3D CAD-defined products. Previously, it evaluates several Redundancy Resolution Schemes at the joint-rate level for the configuration of the postprocessor, dealing not only with the additional joints but also with the redundancy due to the symmetry on the milling tool. The use of these redundancies is optimized by adjusting two performance criterion vectors related to both singularity avoidance and maintenance of a preferred reference posture, as secondary tasks to be done during the path tracking. In addition, two proper fuzzy inference engines actively adjust the weight of each joint in these tasks. The postprocessor is validated in a real prototyping of a Valencian Falla., This research is partially supported by the Technical University of Valencia (PAID-00-09), project PROMETEO 2009/063 of Generalitat Valenciana and research project DPI2009-14744-C03-01 of the Spanish Government.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

CAM-Rob postprocessor based on a fuzzified redundancy resolution scheme

  • Andrés de la Esperanza, Francisco Javier
  • Gracia Calandin, Luis Ignacio|||0000-0001-9258-9286
  • Tornero Montserrat, Josep|||0000-0003-1571-0251
This work highlights the applicability of different redundancy resolution schemes to the postprocessing stage from a computer-aided manufacturing (CAM) system to an industrial redundant workcell. The inverse kinematic problem for redundant manipulators is not straightforward and, therefore, it is commonly solved using an iteratively approach based on redundant resolution schemes at the velocity level. In this work, two conceptions of redundancy resolution schemes are evaluated and a novel fuzzy inference system is developed to improve the performance during the toolpath tracking in order to avoid singularities and to maintain a preferred reference posture. For this purpose, the fuzzy inference engine properly adjusts the weight of each joint in the calculation of the performance criterion vectors. The proposed approach is validated in the real prototyping of a windmill blademold using a KUKA KR15/2manipulator mounted on a linear track and synchronized with a rotary table. To the authors knowledge, the proposed method and the results shown are novel in the context of postprocessing techniques from CAM systems to industrial robots devoted to milling works. With the same guidelines, the postprocessor programmed inside the CAM system is expected to be easily applicable not only to other industrial robots, but also for different applications such as welding or painting labors., This research is partially supported by the Technical University of Valencia (PAID-00-09-3092, PAID-05-11-2640), project PROMETEO 2009/063 of Generalitat Valenciana and research project DPI2009-14744-C03-01 of the Spanish Government.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

On improving robot image-based visual servoing based on dual-rate reference filtering control strategy

  • Solanes, J. Ernesto|||0000-0001-5011-4872
  • Muñoz-Benavent, Pau|||0000-0003-4681-183X
  • Leopoldo Armesto|||0000-0003-0979-4428
  • Tornero Montserrat, Josep|||0000-0003-1571-0251
  • Girbés, Vicent
It is well known that the use of multi-rate control techniques have improved the performance of many systems in general, and robotic systems, in particular. The main contribution of this paper is the generalization of the Reference Filtering control strategy from a dual-rate point of view, improving its inherent properties by overcoming the problem of sensor latency. In the paper, we discuss and analyze the improvements introduced by the novel dual-rate reference filtering control strategy in terms of convergence time, reachability and robustness. More specifically, we discuss the capability to solve positioning tasks, when hardware limitations are present with large sampling rates. In addition, a comparison is made between the single-rate and the proposed dual-rate control strategies to prove the advantages of the latter approach. A complete set-up has been prepared for validation, including a six degree of freedom (DOF) industrial manipulator, a smart camera and embedded hardware used as a high level controller., This work was supported by VALi+d Program (Generalitat Valenciana), DIVISAMOS Project (Spanish Ministry, DPI-2009-14744-C03-01), PROMETEO Program (Conselleria d'Educacio, Generalitat Valenciana) and SAFEBUS: Ministry of Economy and Competitivity, IPT-2011-1165-370000).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Automated milling path tracking and CAM-ROB integration for industrial redundant manipulators

  • Gracia Calandin, Luis Ignacio|||0000-0001-9258-9286
  • Gracia Calandin, Carlos Pablo|||0000-0002-8589-2452
  • Andrés de la Esperanza, Francisco Javier
[EN] The present paper explores the industrial capabilities of a CAM¿]ROB system implementation based on a commercial CAD/CAM system (NXTM) for an industrial robotic workcell of eight joints, committed to the rapid prototyping of 3D CAD¿]defined models. The workcell consists of a KUKATM KR15/2 manipulator assembled on a linear track and synchronized with a rotary table. A redundancy resolution scheme is developed to deal with the redundancies due to the additional joints of the robot, plus the one from the symmetry axis of the milling tool. During the path tracking, the use of these redundancies is optimized by adjusting two performance criterion vectors related to singularity avoidance and maintenance of a preferred reference posture, as secondary tasks to be done. In addition, two suitable fuzzy inference engines adjust the weight of each joint in these tasks. The developed system is validated in a real prototyping of a carving., This research is partially supported by research project DPI2009-14744-C03-01 of the Spanish Government, project PROMETEO 2009/063 of Generalitat Valenciana, and research projects PAID-05-11-2640 and PAID-00-12-SP20120159 of the Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Path following hybrid control for vehicle stability applied to industrial forklifts

  • Girbés, Vicent
  • Leopoldo Armesto|||0000-0003-0979-4428
  • Tornero Montserrat, Josep|||0000-0003-1571-0251
The paper focuses on a closed-loop hybrid controller (kinematic and dynamic) for path following approaches with industrial forklifts carrying heavy loads at high speeds, where aspects such as vehicle stability, safety, slippage and comfort are considered. The paper first describes a method for generating Double Continuous Curvature (DCC) paths for non-holonomic wheeled mobile robots, which is the basis of the proposed kinematic controller. The kinematic controller generates a speed profile, based on slow-in and fast-out policy, and a curvature profile recomputing DCC paths in closed-loop. The dynamic controller determines maximum values for decelerations and curvatures, as well as bounded sharpness so that instantaneous vehicle stability conditions can be guaranteed against lateral and frontal tip-overs. One of the advantages of the proposed method, with respect to full dynamic controllers, is that it does not require dynamic parameters to be estimated for modelling, which in general can be a difficult task. The proposed kinematic dynamic controller is afterwards compared with a classic kinematic controller like Pure-Pursuit. For that purpose, in our hybrid control structure we have just replaced the proposed kinematic controller with Pure-Pursuit. Several metrics, such as settling time, overshoot, safety and comfort have been analysed., This work was supported by VALi+d and PROMETEO Programs (Conselleria d'Educacio, Generalitat Valenciana), DIVISAMOS (DPI-2009-14744-C03-01) and SAFEBUS (IPT-2011-1165-370000): Ministry of Economy and Competitivity.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Hydrodynamic Force calculation over an axisymmetric auv with constant ocean currents at large range of angles of attack

  • Aguirre Gomez, Fredy Alexander
  • Vargas, S.
  • Tornero Montserrat, Josep|||0000-0003-1571-0251
[EN] Mobile robotics has allowed remote exploration of terrestrial, aerial and aquatic environments; environments that present conditions where human could not bear; e.g., extreme temperatures, extremely low or high-pressure and perform surveillance without being detected among others. The incorporation of robots in these activities reduces the risk to which a human would be exposed in these environments. In aquatic environments, specifically in ocean, there are currents that interfere in the development of missions such as data acquisition and structures overhaul, these streams affect robot activities making difficult to maintain a specific position to develop the mission accurately. The application of a control strategy that allows keeping the robot in a specific position requires of the Hydrodynamic Force generated by the marine currents. On the other hand, as the robot moves it is necessary to know the magnitude of the Hydrodynamic Force changes in the new positions. This work was performed on a symmetric Autonomous Underwater Vehicle (AUV) Hull in the X-Y and X-Z planes in a range of attack angles from 0o to 180º. In this article, a series of simulations was developed through Computer Fluid Dynamics (CFD). This method allowed to observe three zones in the graph of the hydrodynamic coefficient (CH) according to the angle of attack (0o ¿ ¿ ¿ 25º, 20o < ¿ ¿ 90º y 90o < ¿ ¿ 180º), for each of these zones a correlation was proposed empirical polynomial of third order to obtain the magnitude of the Hydrodynamic Force (fH). The simulations were performed for a Reynolds number of 1.8 x 106 , based on the diameter of the Hull. This methodology is proposed as a solution to evaluate in an agile and satisfactory way the Hydrodynamic Force for different orientations between the vehicle studied and the flow.