Pasar al contenido principal

SISTEMAS AVANZADOS DE SEGURIDAD INTEGRAL EN AUTOBUSES - SAFEBUS

IPT-2011-1165-370000

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Nacional de Cooperación Público-Privada
Subprograma Subprograma INNPACTO
Convocatoria INNPACTO
Año convocatoria 2011
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Subdirección General de Estrategias de Colaboracion Publico-Privada
Centro beneficiario COGNITIVE ROBOTS SL
Identificador persistente http://dx.doi.org/10.13039/501100004837

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Proyecto SAFEBUS: Sistemas Avanzados de Seguridad Integral en Autobuses, SAFEBUS Project: Advanced Safety Systems in Buses

  • Leopoldo Armesto|||0000-0003-0979-4428
  • Dols Ruiz, Juan Francisco|||0000-0003-1815-1360
  • Arnal-Benedicto, Laura
  • Girbés, Vicent
  • Peris, Juan Carlos
[EN] It is well known from previous studies, that accidents of buses in urban scenarios, with low speed profiles, make necessary to introduce driving assistance systems. In this sense, this paper describes the results of the SAFEBUS research project “Sistemas Avanzados de Seguridad Integral en Autobuses”. It focuses in safety aspects proposing a system valid at low speed profiles, basically at bus stops. Here, we describe the main ideas exploited in the project and their results, that is, a people detection system together with a driving assistance system with audiovisual and haptic feedback. We also show some experiments and validations carried out at the facilities of Castrosua S.A. company., [ES] Es bien conocido a partir de estudios previamente realizados, la elevada accidentabilidad de los autobuses urbanos en situaciones de baja velocidad que hacen más necesarios sistemas de asistencia a la conducción. En este sentido, el artículo describe los resultados obtenidos como consecuencia del desarrollo del proyecto Sistemas Avanzados de Seguridad Integral en Autobuses (SAFEBUS). Concretamente, se centra en los aspectos de seguridad exterior del autobús, proponiendo un sistema para las situaciones de baja velocidad, paradas o arrancadas del autobús. En él se describen las ideas conceptuales del proyecto y los subsistemas que lo conforman: sistema de detección de personas y sistema avanzado de asistencia al conductor, incluyendo el diseño de dispositivos de realimentación háptica y audio-visual. Así mismo, se detallan los experimentos y validaciones realizados tras la implantación del mismo en autobuses de la compañía Castrosua S.A., los cuales demuestran la capacidad de alertar al conductor y en caso necesario detenerlo en situaciones de peligro., Este art´ıculo ha sido financiado por el Ministerio de Ciencia e Innovacion espa ´ nol ˜ mediante el Proyecto Sistemas Avanzados de Seguridad Integral en Autobuses (SAFEBUS) (IPT2011-1165-370000). El proyecto fue desarrollado por un consorcio de empresas tecnologicas y universidades, coordinadas ´ por Cognitive Robots, S.L., y participado por la Universidad Politecnica de Valencia, Centro Zaragoza, Castrosua S.A. y el ´ Instituto de Biomecanica de Valencia. ´ Los autores quieren agradecer a Jose Lu ´ ´ıs Sanchez ´ Carrascosa por su inestimable dedicacion y entrega en el proyecto.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Haptic Feedback to Assist Bus Drivers for Pedestrian Safety at Low Speed

  • Girbés, Vicent
  • Leopoldo Armesto|||0000-0003-0979-4428
  • Dols Ruiz, Juan Francisco|||0000-0003-1815-1360
  • Tornero Montserrat, Josep|||0000-0003-1571-0251
Buses and coaches are massive Passenger Transportation Systems (PTS), because they represent more than half of land PTS in the European Union. Despite of that, bus accident figures are lower than other means of transport, but its size and weight increase the severity of accidents in which buses are involved, even at low speed. In urban scenarios, turnings and manoeuvres around bus stops are the main causes of accidents, mostly due to low visibility, blind spots or driver s distractions. Therefore, there is an increasing interest in developing driving assistance systems to avoid these situations, among others. However, even though there are some solutions on the market, they are not meant to work in urban areas at low speed and with the sole purpose of preventing collisions with pedestrians. In this sense, the paper proposes an active safety system for buses in manoeuvres at low speed. The safety system consists of haptic feedback devices together with collision avoidance and risk evaluation systems based on detected people nearby the bus. The performance of the active safety system has been validated in a simulated urban scenario. Our results show that driver s reaction time is reduced and time to collision increased due to the proposed low-speed active safety system. In particular, it is shown that there is a reduction in the number of high risk cases and collisions, which implies a considerable improvement in safety terms. In addition to this, a brief discussion about current regulations for innovative safety systems on a real vehicles is carried out., This paper has been funded by Ministerio de Ciencia e Innovacion (Spain) through the projects "Sistemas Avanzados de Seguridad Integral en Autobuses (SAFEBUS)" (IPT-2011-1165-370000) and "Sistemas de Conduccion Segura de Vehiculos de Transporte de Pasajeros y Materiales con Asistencia Haptica/Audiovisual e Interfaces Biomedicas (SAFETRANS)" (DPI2013-42302-R). This work was also supported by Programa VALi+d (Generalitat Valenciana). The authors wish to thank Jose Luis Sanchez Carrascosa for his dedication and commitment to the project and thank to Ana Isabel Sanchez Galdon for her valuable help regarding ANOVA analysis.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

On improving robot image-based visual servoing based on dual-rate reference filtering control strategy

  • Solanes, J. Ernesto|||0000-0001-5011-4872
  • Muñoz-Benavent, Pau|||0000-0003-4681-183X
  • Leopoldo Armesto|||0000-0003-0979-4428
  • Tornero Montserrat, Josep|||0000-0003-1571-0251
  • Girbés, Vicent
It is well known that the use of multi-rate control techniques have improved the performance of many systems in general, and robotic systems, in particular. The main contribution of this paper is the generalization of the Reference Filtering control strategy from a dual-rate point of view, improving its inherent properties by overcoming the problem of sensor latency. In the paper, we discuss and analyze the improvements introduced by the novel dual-rate reference filtering control strategy in terms of convergence time, reachability and robustness. More specifically, we discuss the capability to solve positioning tasks, when hardware limitations are present with large sampling rates. In addition, a comparison is made between the single-rate and the proposed dual-rate control strategies to prove the advantages of the latter approach. A complete set-up has been prepared for validation, including a six degree of freedom (DOF) industrial manipulator, a smart camera and embedded hardware used as a high level controller., This work was supported by VALi+d Program (Generalitat Valenciana), DIVISAMOS Project (Spanish Ministry, DPI-2009-14744-C03-01), PROMETEO Program (Conselleria d'Educacio, Generalitat Valenciana) and SAFEBUS: Ministry of Economy and Competitivity, IPT-2011-1165-370000).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

An Active Safety System for Low-Speed Bus Braking Assistance

  • Girbés, Vicent
  • Leopoldo Armesto|||0000-0003-0979-4428
  • Dols Ruiz, Juan Francisco|||0000-0003-1815-1360
  • Tornero Montserrat, Josep|||0000-0003-1571-0251
Accidents in which buses or coaches are involved cause thousands of injuries and fatalities every year. To reduce their number and severity, the paper describes an Advanced Driver Assistance Systems (ADAS) based on a haptic throttle pedal and emergency braking. It also proposes a computationally efficient algorithm with a methodology based on three main concepts: a simplified but accurate vehicle model; an efficient collision detection system considering driver's intention and pedestrians wandering around the vehicle; and a risk evaluation system to generate warnings and emergency braking signals. Finally, the performance of the proposed ADAS is validated using a driving simulation cabin with a very realistic urban scenario and original elements from real buses. The results show a statistically significant improvement in safety, as the number of collisions and high risk situations are clearly minimized, reaction time to press the brake pedal is improved and time to collision increased in emergency situations. Implementation of the proposed ADAS into city buses would potentially improve safety, reducing the frequency and severity of accidents with pedestrians., This work was supported in part by Ministry of Science and Innovation of Spain through the SAFEBUS Project "Sistemas Avanzados de Seguridad Integral en Autobuses" under Grant IPT-2011-1165-370000 and the SAFETRANS Project "Sistemas de Conduccion Segura de Vehiculos de Transporte de Pasajeros y Materiales con Asistencia Haptica/Audiovisual e Interfaces Biomedicas" under Grant DPI2013-42302-R and in part by the Generalitat Valenciana, Programa VALi+d (ACIF/2010/206). The Associate Editor for this paper was E. Kosmatopoulos.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Path following hybrid control for vehicle stability applied to industrial forklifts

  • Girbés, Vicent
  • Leopoldo Armesto|||0000-0003-0979-4428
  • Tornero Montserrat, Josep|||0000-0003-1571-0251
The paper focuses on a closed-loop hybrid controller (kinematic and dynamic) for path following approaches with industrial forklifts carrying heavy loads at high speeds, where aspects such as vehicle stability, safety, slippage and comfort are considered. The paper first describes a method for generating Double Continuous Curvature (DCC) paths for non-holonomic wheeled mobile robots, which is the basis of the proposed kinematic controller. The kinematic controller generates a speed profile, based on slow-in and fast-out policy, and a curvature profile recomputing DCC paths in closed-loop. The dynamic controller determines maximum values for decelerations and curvatures, as well as bounded sharpness so that instantaneous vehicle stability conditions can be guaranteed against lateral and frontal tip-overs. One of the advantages of the proposed method, with respect to full dynamic controllers, is that it does not require dynamic parameters to be estimated for modelling, which in general can be a difficult task. The proposed kinematic dynamic controller is afterwards compared with a classic kinematic controller like Pure-Pursuit. For that purpose, in our hybrid control structure we have just replaced the proposed kinematic controller with Pure-Pursuit. Several metrics, such as settling time, overshoot, safety and comfort have been analysed., This work was supported by VALi+d and PROMETEO Programs (Conselleria d'Educacio, Generalitat Valenciana), DIVISAMOS (DPI-2009-14744-C03-01) and SAFEBUS (IPT-2011-1165-370000): Ministry of Economy and Competitivity.