Pasar al contenido principal

DESARROLLO DE METODOLOGIAS DE RECOMPOSICION AUTOMATICA DE FRAGMENTOS BASADAS EN TECNICAS DE ADQUISICION, ANALISIS Y PROTOTIPADO 3D

HAR2012-38391-C02-02

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación Fundamental no Orientada
Convocatoria Proyectos I+D
Año convocatoria 2012
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Secretaría de Estado de Investigación, Desarrollo e Innovación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Creación de implantes 3D en procesos de conservación y restauración de vidrio arqueológico, Making 3D implants for conservation and restoration of archaeological glass

  • Díaz-Marín, Carmen
  • Aura-Castro, Elvira|||0000-0003-4932-1094
[EN] This article describes the restoration of a glass bowl from the 16th-17thcentury by creating its three-dimensional (3D)model. The final purpose is to work with this model in order to avoid damaging situations that are associated with the manipulation of fragile objects. The gap areas, those corresponding to the missing fragments not found in the excavation, were carried out by constructing digital implants. A restricted area of the 3D model has been duplicated in order to accommodate it to confined intervals of the gap. The final implants were printed with acrylonitrile butadiene styrene (ABS) filament. These implants replace the lost areas and give stability back to the item by recovering the original morphology. The result can be compared with the outcome obtained by a traditional process, but differs due to the fact that requires minimum manipulation of the item, so it can contribute to preserve and safeguard the restored object. This is a non-invasive method which is offered as an alternative treatment, where the archaeological object is replaced by its virtual model in the steps of the process after 3D data acquisition. Significant differences have not been found in the 3D printing results obtained with the two types of filaments tested (white and clear)., [ES] En este artículo se restaura un cuenco de vidrio del siglo XVI-XVII mediante la creación de su modelo tridimensional (3D)con el fin de operar con él y eliminar el riesgo que entraña la manipulación de objetos frágiles. La áreas faltantes, correspondientes a los fragmentos de vidrio no encontrados en la excavación, se han llevado a cabo mediante la construcción digital de implantes. Para elaborar los implantes se ha duplicado un volumen del modelo 3D del cuenco adaptándolo al espacio confinado en las áreas vacías. La impresión de los implantes se ha hecho con filamento acrilonitrilo butadieno estireno(ABS). Estos implantes, que sustituyen a las zonas perdidas, han devuelto la estabilidad a la pieza y han permitido recrear la morfología original. El resultado puede ser comparado al obtenido por métodos tradicionales,pero difiere en que requiereuna mínimamanipulación del objeto, contribuyendo así, a la preservación y salvaguarda del objeto restaurado. Este método no invasivo se ofrece como un tratamiento alternativo,donde el objeto arqueológico es sustituido por su modelo virtual en todas las fases del procesoposteriores a la captura de datos 3D. No se han encontrado diferencias significativas en cuanto a los resultados obtenidos de impresión 3D con los dos tipos de filamentos ensayados(blanco y translúcido)., El trabajo se ha desarrollado gracias al Programa del Plan Nacional de I+D+i 2008-2011 del Ministerio de Economía y Competitividad de España, Proyectos HAR2012-38391-C02-01 y HAR2012-38391-C02-02. También se ha desarrollado a través del Programa Estatal de Investigación, Desarrollo e Innovación Orientada a los Retos de la Sociedad en el marco del Plan Estatal de Investigación Científica y Técnica y de Innovación 2013-2016 del Ministerio de Economía y Competitividad de España con cofinanciación del Fondo Europeo de Desarrollo Regional (FEDER), Proyecto HAR2015-69408-R (MINECO/FEDER). Los autores quieren agradecer la colaboración del Museo de Cerámica de Manises y especialmente a su directora Dña. Sara Blanes Ibáñez, por proporcionar la pieza usada para ilustrar la técnica propuesta
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

GEMA2:Geometrical matching analytical algorithm for fast mobile robots global self-localization

  • Sánchez Belenguer, Carlos
  • Soriano Vigueras, Ángel
  • Vallés Miquel, Marina|||0000-0002-6396-0098
  • Vendrell Vidal, Eduardo|||0000-0001-7945-1418
  • Valera Fernández, Ángel|||0000-0001-6843-6394
[EN] This paper presents a new algorithm for fast mobile robot self-localization in structured indoor environments based on geometrical and analytical matching, GEMA(2). The proposed method takes advantage of the available structural information to perform a geometrical matching with the environment information provided by measurements collected by a laser range finder. In contrast to other global self-localization algorithms like Monte Carlo or SLAM, GEMA(2) provides a linear cost with respect the number of measures collected, making it suitable for resource-constrained embedded systems. The proposed approach has been implemented and tested in a mobile robot with limited computational resources showing a fast converge from global self-localization. (C) 2014 Elsevier B.V. All rights reserved., This work has been partially funded by FEDER-CICYT projects with references DPI2011-28507-C02-01 and HAR2012-38391-C02-02 financed by Ministerio de Ciencia e Innovacion and Ministerio de Economia y Competitividad (Spain).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A Discrete Approach for Pairwise Matching of Archaeological Fragments

  • Vendrell Vidal, Eduardo|||0000-0001-7945-1418
  • Sánchez Belenguer, Carlos
This article addresses the problem of automatic reconstruction of ancient artifacts from archaeological fragments. The technique described here focuses on pairwise matching of flat fragments (typically fresco fragments), and it is intended to be the core of a larger system for artifact reconstruction. Global registration techniques are challenging due to the combinatory explosion that happens in the solution space: the goal is to find the best alignment among all possible ones without an initialization. This fact defines the duality between performance and correction that we face in this work. The proposed technique defines a cost function to evaluate the quality of an alignment based on a discrete sampling of the fragments that ensures data alignment. Starting from an exhaustive search strategy, the technique progressively incorporates new features that lead to a hierarchical search strategy. Convergence and correction of the resulting technique are ensured using an optimistic cost function. Internal search calculations are optimized so the only operations performed are additions, subtractions, and comparisons over aligned data. All heavy geometric operations are carried out by the GPU on a preprocessing stage that only happens once per fragment., This work is supported by the Programa de Ayudas de Investigacion y Desarrollo (PAID) of the Universitat Politecnica de Valencia and the "Plan Nacional de I+D+i 2008-2011" from the Ministerio de Economia y Competitividad of Spain, Project ID: HAR2012-38391-C02-02.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Cyclododecane as opcifier for digitalization of archaeological glass

  • Díaz Marín, María del Carmen
  • Sánchez Belenguer, Carlos
  • Aura-Castro, Elvira|||0000-0003-4932-1094
  • Vendrell Vidal, Eduardo|||0000-0001-7945-1418
[EN] This paper faces the problem of acquiring archaeological artifacts using triangulation based 3D laser scanners and focusing on reflective/refractive surfaces. This kind of artifacts are mostly made of glass or polished metal, and the properties of their surfaces violate most of the fundamental assumptions made by vision algorithms. Also, the unique and fragile nature of archaeological artifacts adds an extra constraint to the acquisition process: the use of industrial whitening sprays has to be avoided, due to the physicochemical processes required to clean the surface after scanning and because the chemical properties of these sprays may damage the original object. As an alternative to them, a new way to use a common conservation material is proposed: the use of cyclododecane as a whitening spray. Thanks to its chemical stability and to the fact that it sublimes at room temperature, together with its good filmforming capabilities, a set of evaluation tests is presented to prove thatthe error introduced by the opaque thin layer created on the surface of the artifact is smaller than the accuracy of the 3D scanner and, thus, no acquisition errors are introduced. A comparison with general-purpose industrial whitening sprays is also presented, and achieved results show no significant differences in the quality of the resulting 3D models., This work is supported by the "Programa de Ayudas de Investigacion y Desarrollo (PAID)" of the Universitat Politecnica de Valencia and the "Plan Nacional de I+D+i 2008-2011" from the Ministerio de Economia y Competitividad of Spain, Projects ID: HAR2012-38391-C02-01 and HAR2012-38391-C02-02.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Automatic production of tailored packaging for fragile archaeological artifacts

  • Sánchez Belenguer, Carlos
  • Sánchez López, Miguel
  • Díaz Marín, María del Carmen
  • Vendrell Vidal, Eduardo|||0000-0001-7945-1418
  • Aura-Castro, Elvira|||0000-0003-4932-1094
[EN] This article deals with storage and transportation of fragile heritage objets. The main goal is to create an ad hoc packaging software solution by combining the use of 3D scanning and 3D milling technologies. Traditionally, packaging for this kind of object is made manually, creating custom supports and boxes adapted to the specific needs and particularities of each case. This process is time consuming and fully depends on the conservator's skills. On the other hand, the proposed solution provides a faster execution and a standard solution adapted to every object. The process starts with the acquisition of 3D digital models of the original artifacts and uses an interactive GPU-accelerated algorithm to assist the conservator in the construction of the package. The final result is a CNC program that is sent to a low-cost milling machine to produce the housing for the selected artifact. Unlike 3D printers, milling machines allow working with lots of different materials, which is a key aspect for this kind of package: chemical stability and shock absorption are mandatory. Given that during the design process original artifacts are only manipulated in the acquisition stage, risks of damaging them are also reduced. Since the whole process is considered in the same application, intermediate calculations are performed considering manufacturing and user-defined restrictions. This way, together with a GPU implementation, achieved results are very fast, providing a real-time application with visual feedback., This work is supported by the Plan Nacional de I+D+i 2008-2011 from the Ministerio de Econom´ıa y Competitividad of Spain, projects HAR2012-38391-C02-01 and HAR2012-38391-C02-02, and the Programa de Ayudas de Investigacion y Desarrollo ´ (PAID) of the Universitat Politecnica de València.