Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 88
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Generación automática de problemas de diseño de controladores para sistemas lineales autoevaluables con Doctus, Automated generation of control design benchmark problems for computer-assessed education with Doctus

  • Sánchez, C.
  • Muñoz de la Peña, D.
  • Gómez-Estern, F.
[ES] En este trabajo se presenta una aplicación que permite a un profesor generar de forma automática ejercicios de diseño de controladores para sistemas lineales para la plataforma de e-learning Doctus. Doctus es una aplicación que permite automatizar la recogida, almacenamiento y evaluación de ejercicios de contenido científico-técnico. En general, para utilizar Doctus es necesario escribir scripts de MATLAB, tanto para la evaluación automàtica de la respuesta de los alumnos como para la generación de enunciados personalizados. La aplicación que se presenta es una extensión de Doctus destinada a simplificar este trabajo, permitiendo generar ejercicios personalizados mediante la aplicación de un escalado temporal y de ganancia a partir de un problema semilla que proporciona el profesor. La aplicación presentada resuelve, por lo tanto, dos problemas: primero el de facilitar el uso de Doctus a profesores no expertos, y segundo el de proporcionar a cada estudiante un ejercicio individualizado, [EN] This paper presents an application that enables the teacher to automatically generate control design exercises for linear systems for the Doctus e-learning platform. Doctus is an application that automates the collection, storage and evaluation of scientific and technical education exercises. In general, the use of Doctus requires writing MATLAB scripts, both for the automatic evaluation of student responses and for the generation of personalized wordings. The application presented is an extension of Doctus designed to simplify this work, allowing the generation of personalized exercises by applying time and gain scalings based on a seed problem provided by the teacher. As a consequence, the application presented solves two problems: first, to facilitate the use of Doctus to non-expert teachers, and second, to provide each student with an individualized exercise with guaranteed solution and equal diffculty., Asimismo desean agradecer la ayuda otorgada por el Vicerrectorado de investigación de la Universidad Loyola Andalucía. Este trabajo se ha financiado parcialmente con los proyectos DPI2016-75294-C2-2-R y DPI2016-76493-C3-1-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Análisis y diseño de sistemas lineales con parámetros variantes utilizando LMIs, Analysis and design of linear parameter varying systems using LMIs

  • Rotondo, Damiano
  • Sánchez, Helem S.
  • Nejjari, Fatiha
  • Puig, Vicenç
[EN] This paper presents a tutorial on analysis and design of linear parameter varying (LPV) systems using linear matrix inequalities (LMIs). Several specifications, such as D-stability, guaranteed H∞ performance and guaranteed quadratic cost, as well as different control structures, such as state-feedback control, output-feedback control and observer-based control, are considered. A numerical example and a simplified model of a two-degrees-of-freedom helicopter (TRMS) are used to illustrate in a didactic manner the overall design methodology using LMIs., [ES] En este artículo se presenta un tutorial sobre análisis y diseño de sistemas lineales con parámetros variantes (LPV) utilizando las desigualdades lineales matriciales (LMIs). Varias especificaciones, tales como la D-estabilidad, el desempeño H∞ garantizado y el coste cuadrático garantizado, así como también diferentes estructuras de control, tales como el control por realimentación de estado, el control por realimentación de salida y el control basado en observador, han sido consideradas. Para ilustrar de forma didáctica el desarrollo completo del diseño mediante LMIs, se utilizan un ejemplo numérico y un modelo simplificado de un helicóptero de dos grados de libertad (TRMS)., Este trabajo ha sido realizado gracias al apoyo de la Agencia Estatal de Investigación (AEI) mediante el sello de excelencia científica María de Maetzu al IRI (ref. MDM-2016-0656),la ayuda Juan de la Cierva-Formación (ref. FJCI-2016-29019),y el apoyo de AEI y del Fondo Europeo de Desarrollo Regional (FEDER) a través de los proyectos DEOCS (ref. MINECO DPI2016-76493-C3-3-R) y SCAV (ref. MINECO DPI2017-88403-R).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A distributed predictive control approach for periodic flow-based networks: application to drinking water systems

  • Grosso, J. M.
  • Ocampo-Martínez, Carlos
  • Puig, Vicenç
This paper proposes a distributed model predictive control approach designed to work in a cooperative manner for controlling flow-based networks showing periodic behaviours. Under this distributed approach, local controllers cooperate in order to enhance the performance of the whole flow network avoiding the use of a coordination layer. Alternatively, controllers use both the monolithic model of the network and the given global cost function to optimise the control inputs of the local controllers but taking into account the effect of their decisions over the remainder subsystems conforming the entire network. In this sense, a global (all-to-all) communication strategy is considered. Although the Pareto optimality cannot be reached due to the existence of non-sparse coupling constraints, the asymptotic convergence to a Nash equilibrium is guaranteed. The resultant strategy is tested and its effectiveness is shown when applied to a large-scale complex flow-based network: the Barcelona drinking water supply system., This work has been partially funded by the Spanish Ministry of Science and Technology through the projects DEOCS (Ref. DPI2016-76493-C3-3-R) and HARCRICS (Ref. DPI2014-58104-R)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Non-centralized control for flow-based distribution networks: A game-theoretical insight

  • Barreiro-Gómez, Julian
  • Ocampo-Martínez, Carlos
  • Quijano, Nicanor
  • Maestre, Jose Maria
This paper solves a data-driven control problem for a flow-based distribution network with two objectives: a resource allocation and a fair distribution of costs. These objectives represent both cooperation and competition directions. It is proposed a solution that combines either a centralized or distributed cooperative game approach using the Shapley value to determine a proper partitioning of the system and a fair communication cost distribution. On the other hand, a decentralized noncooperative game approach computing the Nash equilibrium is used to achieve the control objective of the resource allocation under a non-complete information topology. Furthermore, an invariant-set property is presented and the closed-loop system stability is analyzed for the non-cooperative game approach. Another contribution regarding the cooperative game approach is an alternative way to compute the Shapley value for the proposed specific characteristic function. Unlike the classical cooperative-games approach, which has a limited application due to the combinatorial explosion issues, the alternative method allows calculating the Shapley value in polynomial time and hence can be applied to large-scale problems., Authors would like to thank COLCIENCIAS (grant 6172) and Agència de Gestió d’Ajust Universitaris i de Recerca AGAUR (FI 2014) for supporting J. Barreiro-Gomez. Authors also would like to thank the projects DEOCS (Ref. DPI2016-76493-C3-3-R), “Control Predictivo en Red” (Ref. DPI2008-05818) from the Spanish Ministry of Science and Education; and the European project FP7-ICT DYMASOS (grant agreement 611281), which have partially supported this work., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Sensor placement for classifier-based leak localization in water distribution networks using hybrid feature selection

  • Soldevila, Adrià
  • Blesa, Joaquim
  • Tornil-Sin, Sebastian
  • Fernández Cantí, Rosa M.
  • Puig, Vicenç
This paper presents a sensor placement approach for classifier-based leak localization in water distribution networks. The proposed method is based on a hybrid feature selection algorithm that combines the use of a filter based on relevancy and redundancy with a wrapper based on genetic algorithms. This algorithm is applied to data generated by hydraulic simulation of the considered water distribution network and it determines the optimal location of a prespecified number of pressure sensors to be used by a leak localization method based on pressure models and classifiers proposed in previous works by the authors. The method is applied to a small-size simplified network (Hanoi) to better analyze its computational performance and to a medium-size network (Limassol) to demonstrate its applicability to larger real-size networks., This work has been funded by the Ministerio de Economía, Industria y Competitividad (MEICOMP) of the Spanish Government through the project DEOCS (ref. DPI2016-76493), by MEICOMP and FEDER through the grant IJCI-2014-20801, and by the Catalan Agency for Management of University and Research Grants (AGAUR), the European Social Fund (ESF) and the Secretary of University and Research of the Department of Companies and Knowledge of the Government of Catalonia through the grant FI-DGR 2015 (ref. 2015 FI_B 00591)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Set-membership approach and Kalman observer based on zonotopes for discrete-time descriptor systems

  • Wang, Ye
  • Puig, Vicenç
  • Cembrano, Gabriela
This paper proposes a set-membership state estimator and a zonotopic Kalman observer for discrete-time descriptor systems. Both approaches are developed in a set-based context considering system disturbances, measurement noise, and unknown inputs. This set-membership state estimation approach determines the set of consistent states with the model and measurements by constructing a parameterized intersection zonotope. Two methods to minimize the size of this intersection zonotope are provided: one inspired by Kalman filtering and the other based on solving an optimization problem involving a series of linear matrix inequalities. Additionally, we propose a zonotopic Kalman observer for discrete-time descriptor systems. Moreover, the relationship between both approaches is discussed. In particular, it is proved that the zonotopic Kalman observer in the current estimation type is equivalent to the set-membership approach. Finally, a numerical example is used to illustrate and compare the effectiveness of the proposed approaches., This work was partially supported by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the projects ECOCIS (ref. DPI2013-48243-C2-1-R), DEOCS (ref. DPI2016-76493-C3-3-R) and HARCRICS (ref. DPI2014-58104-R), and the FPI grant (ref. BES-2014-068319)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Economic model predictive control with nonlinear constraint relaxation for the operational management of water distribution networks

  • Wang, Ye
  • Alamo, Teodoro
  • Puig, Vicenç
  • Cembrano, Gabriela
This paper presents the application of an economic model predictive control (MPC) for the operational management of water distribution networks (WDNs) with periodic operation and nonlinear constraint relaxation. In addition to minimizing operational costs, the proposed approach aims to reduce the computational load and to improve the implementation efficiency associated with the nonlinear nature of the MPC problem. The behavior of the WDN is characterized by a set of difference-algebraic equations, where the relation of hydraulic pressure/head and flow in interconnected pipes is nonlinear. Specifically, the considered WDN model includes two categories of nonlinear algebraic equations for unidirectional and bidirectional flows in pipes, respectively. In this paper, we propose an iterative algorithm to relax these nonlinear algebraic equations into a set of linear inequality constraints that will be implemented in the economic MPC design, which improves the implementation efficiency and meanwhile optimizes the economic performance. Finally, the proposed strategy is applied to a well-known benchmark of the Richmond WDN. The closed-loop simulation results are shown and the proposed strategy is also compared with a nonlinear economic MPC using several key performance indexes., This work was partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the project DEOCS (ref. DPI2016-76493), the María de Maeztu Seal of Excellence to IRI (ref. MDM-2016-0656) and the FPI grant (ref. BES-2014-068319), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Multi-model prediction for demand forecast in water distribution networks

  • López Farías, Rodrigo
  • Rodríguez-Rangel, Héctor
  • Puig, Vicenç
  • Flores, Juan J.
This paper presents a multi-model predictor called Qualitative Multi-Model Predictor Plus (QMMP+) for demand forecast in water distribution networks. QMMP+ is based on the decomposition of the quantitative and qualitative information of the time-series. The quantitative component (i.e., the daily consumption prediction) is forecasted and the pattern mode estimated using a Nearest Neighbor (NN) classifier and a Calendar. The patterns are updated via a simple Moving Average scheme. The NN classifier and the Calendar are executed simultaneously every period and the most suited model for prediction is selected using a probabilistic approach. The proposed solution for water demand forecast is compared against Radial Basis Function Artificial Neural Networks (RBF-ANN), the statistical Autoregressive Integrated Moving Average (ARIMA), and Double Seasonal Holt-Winters (DSHW) approaches, providing the best results when applied to real demand of the Barcelona Water Distribution Network. QMMP+ has demonstrated that the special modelling treatment of water consumption patterns improves the forecasting accuracy, This work has been partially funded by the Spanish Ministry of Economy and Competitiveness (MINECO) and the European Union through FEDER program through the projects DEOCS (ref. DPI2016-76493-C3-3-R) and HARCRICS (ref. DPI2014-58104-R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A game theoretical randomized method for large-scale systems partitioning

  • Muros, Francisco Javier
  • Maestre, Jose Maria
  • Ocampo-Martínez, Carlos
  • Algaba, Encarnación
  • Camacho, Eduardo F.
In this paper, a game theory-based partitioning algorithm for large-scale systems (LSS) is proposed. More specifically, a game over nodes is introduced in a model predictive control framework. The Shapley value of this game is used to rank the communication links of the control network based on their impact on the overall system performance. A randomized method to estimate the Shapley value of each node and also an efficient redistribution of the resulting value to the links involved are considered to relieve the combinatorial explosion issues related to LSS. Once the partitioning solution is obtained, a sensitivity analysis is proposed to give a measure of its performance. Likewise, a greedy fine tuning procedure is considered to increase the optimality of the partitioning results. The full Barcelona drinking water network is analyzed as a real LSS case study, showing the effectiveness of the proposed approach in comparison with other partitioning schemes available in the literature., This work was supported in part by the European Union Project FP7-ICT-ICT-2013.3.4-611281 (DYMASOS) and in part by the MINECO-Spain Projects DPI2016-78338-R (CONFIGURA), DPI2017-86918-R, ECO2015-68856-P, and DPI2016-76493-C3-3-R (DEOCS), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Atomicity and non-anonymity in population-like games for the energy efficiency of hybrid-power HetNets

  • Fletscher, Luis A.
  • Barreiro-Gómez, Julian
  • Ocampo-Martínez, Carlos
  • Valencia Peroni, Catalina
  • Maestre, Jose Maria
In this paper, the user–base station association problem is addressed to reduce grid consumption in heterogeneous cellular networks powered by hybrid energy sources (grid and renewable energy). This paper proposes a novel distributed control scheme inspired by population games and designed considering both atomicity and non-anonymity , i.e., describing the individual decisions of each agent. The controller performance is considered from an energy-efficiency perspective, which requires the guarantee of appropriate quality-of-service levels according to renewable energy availability. The efficiency of the proposed scheme is compared with other heuristic and optimal alternatives in two simulation scenarios. Simulation results show that the proposed approach inspired by population games reduces grid consumption by 12% when compared to the traditional best-signal-level association policy., This work was supported in part by the Colombian funding entity “Departamento Administrativo de Ciencia, Tecnolog´ıa e Innovacion - COLCIENCIAS” ´ for the Ph.D. scholarship number 6172. Also by DEOCS project (ref. DPI2016-76493-C3-3-R) from the Spanish Ministry of Culture and Sports and AGAUR - Agencia de Gesti ` o d’Ajuts Universitaris i de Recerca of ´ the Generalitat de Catalunya. Second author acknowledges U.S. Air Force Office of Scientific Research under grant number FA9550-17-1-0259. The work of C. Ocampo-Martinez is partially supported by the project DEOCS (Ref. DPI2016-76493-C3-3-R) from the Spanish MINECO/FEDER. Financial support by the Spanish MINECO project DPI2017-86918-R is gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Algebraic observer-based output-feedback controller design for a PEM fuel cell air-supply subsystem

  • Zakaria, Baroud
  • Noureddine, Gazzam
  • Atallah, Benalia
  • Ocampo-Martínez, Carlos
In this study, an algebraic-observer-based output-feedback controller is proposed for a proton exchange membrane fuel cell (PEMFC) air-supply subsystem, based on both algebraic differentiation and sliding-mode control approaches. The goal of the design is to regulate the oxygen excess ratio (OER) towards its optimal set point value in the PEMFC air-supply subsystem. Hence, an algebraic estimation approach is used to reconstruct the OER based on a robust differentiation method. The proposed observer is known for its finite-time convergence and low computational time compared to other observers presented in the literature. Then, a twisting controller is designed to control the OER by manipulating the compressor motor voltage. The parameters of the twisting controller have been calculated by means of an off-line tuning procedure. The performance of the proposed algebraic-observer-based output-feedback controller is analysed through simulations for different stack-current changes, for parameter uncertainties, and for noise rejection. Results show that the proposed approach properly estimates and regulates the OER in finite-time., This work was supported by Laboratoire d’Analyse et de Commande des Systèmes d’Énergies et Réseaux Électriques. Université Amar Telidji de Laghouat, Laghouat 03000, Algérie. The work of C. Ocampo-Martinez is partially supported by the project DEOCS (Ref. DPI2016-76493-C3-3-R) from the Spanish MINECO/FEDER, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A two-tank benchmark for detection and isolation of cyber attacks

  • Quevedo, Joseba
  • Sánchez, Helem Sabina
  • Rotondo, Damiano
  • Escobet, Teresa
  • Puig, Vicenç
This paper presents a benchmark for the detection and isolation of cyber attacks, which is a non-linear controlled interconnected system based on a two tank system. In this benchmark, a malicious attacker wants to remain hidden while stealing water by altering the signals of the sensors of the levels of the tanks. It is assumed that the attacker can steal water from the tanks using extraction pumps with pre-established flow rates and, depending on the theft and the type of sensor alteration, different attack scenarios are proposed., This work has been partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the projects DEOCS (ref. MINECO DPI2016-76493) and SCAV (ref. MINECO DPI2017-88403-R), by AGAUR of the Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (2017 SGR 482) and by the Agència de Gestió d’Ajuts Universitaris i de Recerca. This work has been also supported by the Spanish State Research Agency through the Maria de Maeztu Seal of Excellence to IRI (MDM-2016-0656) and the grant Juan de la Cierva -Formacion (FJCI-2016-29019), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Frequency-based detection of replay attacks: application to a multiple tank system

  • Sánchez, Helem Sabina
  • Rotondo, Damiano
  • Escobet, Teresa
  • Puig, Vicenç
  • Quevedo, Joseba
This paper presents a frequency-based method for detecting replay attacks and its application to a multiple tank system. This method introduces a sinusoidal signal with a time-varying frequency (authentication signature) into the closed-loop system and checks whether the output signal is compatible with the signature or not. The effectiveness of the method is illustrated through simulation scenarios using a 9-tank system under different situations., This work has been partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the projects DEOCS (ref. MINECO DPI2016-76493) and SCAV (ref. MINECO DPI2017-88403-R), by AGAUR of the Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (2017 SGR 482) and by the Agènda de Gestió d’Ajuts Universitaris i de Recerca. This work has been also supported by the Spanish State Research Agency through the Maria de Maeztu Seal of Excellence to IRI (MDM-2016-0656) and the grant Juan de la Cierva -Formacion (FJCI-2016-29019)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Health-aware LPV-MPC based on a reliability-based remaining useful life assessment

  • Karimi Pour, Fatemeh
  • Puig, Vicenç
  • Cembrano, Gabriela
One of the relevant information provided by the prognostics and health management algorithms is the estimation of the Remaining Useful Life (RUL). The prediction of the expected RUL is very useful to decrease maintenance cost, operational downtime and safety hazards. This paper proposes a new strategy of health-aware Model Predictive Control (MPC) for a Linear Parameter Varying (LPV) system that includes as an additional goal extending the system RUL via their estimation using reliability tools. In this approach, the RUL maximization is included in the objective function of the LPV-MPC controller. The RUL is included in the MPC model as an extra parameter varying equation that considers the control action as scheduling variable. The proposed control approach allows the controller to accommodate to the parameter changes. Through computing an estimation of the state variables during prediction, the MPC model can be modified to the estimated state evolution at each time instant. Moreover, for solving the optimization problem by using a series of Quadratic Programs (QP) in each time instant, a new iterative approach is exhibited, which improves the computational efficiency. A pasteurization plant control system is used as a case study to illustrate the performance of the proposed approach., This work has been partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the projects DEOCS (ref. MINECO DPI2016- 76493) and SCAV (ref. MINECO DPI2017-88403-R). This work has also been partially funded by AGAUR of Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (2017 SGR 482) and by Agencia de Gestio d’Ajuts Universitaris i de Recerca, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Interval observer fault detection ensuring detectability and isolability by using a set-invariance approach

  • Pourasghar, Masoud
  • Puig, Vicenç
  • Ocampo-Martínez, Carlos
This paper proposes the design of an interval observer-based Fault Detection and Isolation (FDI) algorithm using the set-invariance approach. Using this approach, both fault detectability and isolability properties of the proposed interval observer based FDI algorithm can be characterized in system steady-state operation. The effect of the uncertainty is taken into account using zonotopic-set representations. Finally, a simulation example based on a two-tanks system is employed to both illustrate and discuss the effectiveness of the proposed approach., This work has been partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the projects DEOCS (ref. MINECO DPI2016-76493) and SCAV (ref. MINECO DPI2017-88403-R). This work has also been partially funded by AGAUR of Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (2017 SGR 482) and by Agencia de Gestio d’Ajuts Universitaris i de Recerca., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Modelling uncertainty for leak localization in water networks

  • Blesa, Joaquim
  • Pérez, Ramon
The performance and success of model-based leak localization methods applied to water distribution networks (WDN) highly depends on the uncertainty of the system considered. This work proposes an original method of modeling the effect of uncertainties in these networks. The proposed method is based on the collection of real data in the water network in the absence of leaks. The discrepancy (residual) between the measured data and the one provided by a simulator of the network in normal operation is used to extrapolate the possible residuals in the different leak scenarios. In addition, indicators for assessing the effect of uncertainty in the performance of leak localization methods based on residual correlation analysis are provided. The error in terms of correlation intervals and leak localzation assessment between the proposed approximation and the real one is studied by means a simplified model of the WDN of Hanoi (Vietnam)., This work has been partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the projects DEOCS (ref. MINECO DPI2016-76493), SCAV (ref. MINECO DPI2017-88403-R) and through the grant IJCI-2014-20801. This work has also been partially funded by AGAUR of Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (2017 SGR 482)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Pumps condition assessment in water distribution networks

  • Soldevila, Adrià
  • Blesa, Joaquim
  • Fernández Cantí, Rosa M.
  • Tornil-Sin, Sebastian
  • Meseguer, Jordi
  • Puig, Vicenç
This paper presents a method for the detection of faults in electrical pumps. The method relies on the computation of two features, the pump efficiency and the hydraulic balance, that present reference values during healthy pump operation and change when the pump is affected by a fault. In this paper, the CUSUM Change Detection Test and the Mann-Whitney Change Point Method are proposed as change detection algorithms to process both features. The method has been applied to a real installation with several pumps and the results are reported in the paper., This work has been partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the projects DEOCS (ref. MINECO DPI2016-76493), SCAV (ref. MINECO DPI2017-88403-R) and through the grant IJCI-2014-20801. This work has also been partially funded by AGAUR of Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (2017 SGR 482) and by AGAUR and the European Social Fund (ESF) and the Secretary of University and Research of the Department of Companies and Knowledge of the Government of Catalonia through the grant FI-DGR 2015 (ref. 2015 FI_B 00591)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Robust periodic economic model predictive control using probabilistic set invariance for descriptor systems

  • Wang, Ye
  • Muñoz de la Peña, David
  • Puig, Vicenç
  • Puig, Vicenç
  • Cembrano, Gabriela
This paper proposes a robust periodic economic model predictive control (MPC) using probabilistic set invariance for discrete-time descriptor systems. The considered systems are affected by additive disturbances that are bounded and follow a zero-mean Gaussian distribution. To guarantee robustness of the proposed robust economic MPC, a probabilistic invariant set with a given probability is used to contract the state and input constraints. An auxiliary input variable is defined to satisfy algebraic equations from descriptor systems in presence of disturbances. Finally, an application of the proposed MPC strategy to a smart micro-grid is provided to illustrate the performance., This work has been partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the project DEOCS (ref. DPI2016-76493) and SCAV (ref. DPI2017-88403-R), the FPI grant (ref. BES-2014-068319), and by AGAUR of Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (ref. 2017-SGR-482)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Sensor fault diagnosis in inland navigation networks based on a grey-box model

  • Segovia Castillo, Pablo
  • Blesa, Joaquim
  • Duviella, Eric
  • Rajaoarisoa, Lala
  • Nejjari, Fatiha
  • Puig, Vicenç
Inland navigation networks are equipped with limnimeters to measure and record water level data for the control of water levels and the management of water resources. When faults occur on sensors, corrupted data can be considered as correct, leading to undesirable management actions. Therefore, it is necessary to detect and localize these faults. In this paper, the detection and localization of sensor faults is performed through the analysis of the parameters of a grey-box model, which are obtained from available real data. The parameters are determined with a sliding window, with the exception of the delays, which are considered known a priori. A fault is detected and then localized when there is a change in the value of the parameters. This approach is well suited for constant faults and particularly well adapted for intermittent faults. Data of an inland navigation reach located in the north of France are used to highlight the performance of the proposed approach., This work has been partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the projects DEOCS (ref. MINECO DPI2016- 76493), SCAV (ref. MINECO DPI2017-88403-R) and through the grant IJCI-2014-20801. This work has also been partially funded by AGAUR of Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (2017 SGR 482)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Zonotopic unknown input observer of discrete-time descriptor systems for state estimation and robust fault detection

  • Wang, Ye
  • Puig, Vicenç
  • Xu, Feng
  • Cembrano, Gabriela
This paper studies a set-based unknown input observer based on zonotopes for discrete-time descriptor systems affected by uncertainties with application to state estimation and robust fault detection. In this paper, two types of uncertainties are considered: (i) disturbances and noise both bounded by zonotopes; (ii) unknown inputs that can be decoupled. In terms of different applications, the observer gain for state estimation is designed to minimize the effects of unknown-but-bounded disturbances and noise as well as state estimation errors. On the other hand, for robust fault detection, in addition to attenuating uncertainties, the designed observer gain is also expected to be sensitive to faults. To achieve this goal, we propose an iterative algorithm to design the fault detection gain. Finally, some illustrative results in an application example show the effectiveness of the proposed algorithms., This work has been partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the project DEOCS (ref. DPI2016-76493) and SCAV (ref. DPI2017-88403-R), the FPI grant (ref. BES-2014-068319), and by AGAUR of Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (ref. 2017-SGR-482)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Multi-layer health-aware economic predictive control of a pasteurization pilot plant

  • Karimi Pour, Fatemeh
  • Puig, Vicenç
  • Ocampo-Martínez, Carlos
This paper proposes two different health-aware economic predictive control strategies that aim at minimizing the damage of components in a pasteurization plant. The damage is assessed with a rainflow-counting algorithm that allows estimating the components’ fatigue. By using the results obtained from this algorithm, a simplified model that characterizes the health of the system is developed and integrated into the predictive controller. The overall control objective is modified by adding an extra criterion that takes into account the accumulated damage. The first strategy is a single-layer predictive controller with an integral action to eliminate the steady-state error that appears when adding the extra criterion. In order to achieve the best minimal accumulated damage and operational costs, the single-layer approach is improved with a multi-layer control scheme, where the solution of the dynamic optimization problem is obtained from the model in two different time scales. Finally, to achieve the advisable trade-off between minimal accumulated damage and operational costs, both control strategies are compared in simulation over a utility-scale pasteurization plant., This work has been partially funded by the Spanish Government (MINECO) through the project DEOCS (DPI2016-76493-C3-3-R), and by MINECO and FEDER through the project HARCRICS (DPI2014-58104-R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Robust fault estimation based on zonotopic Kalman filter for discrete-time descriptor systems

  • Wang, Ye
  • Puig, Vicenç
  • Cembrano, Gabriela
This paper proposes a set‐based approach for robust fault estimation of discrete‐time descriptor systems. The considered descriptor systems are subject to unknown‐but‐bounded uncertainties (state disturbances and measurement noise) in predefined zonotopes and additive actuator faults. The zonotopic fault estimation filter for descriptor systems is built based on fault detectability indices and matrix to estimate fault magnitude in a deterministic set. The zonotopic fault estimation filter gain is designed in a parameterized form. Within a set‐based framework, following the zonotopic Kalman filter, the optimal filter gain is computed by minimizing the size of the corresponding zonotopes to achieve robustness against uncertainties and the identification of occurred actuator faults. Besides, boundedness of the proposed zonotopic fault estimation is analyzed, which proves that the size of obtained fault estimation bounds is not growing in time. Finally, the simulation results with two application examples are provided to show the effectiveness of the proposed approach., This research was supported by the Spanish State Research Agency (AEI)and the European Regional Development Fund (ERFD) through projects DEOCS (DPI2016-76493-C3-3-R) and SCAV(DPI2017-88403-R), through the Formación de Personal Investigador (FPI) grant (BES-2014-068319), and by AGAUR ofGeneralitat de Catalunya through the Advanced Control Systems (ACS) group grant (2017-SGR-482)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Fault detection and isolation using viability theory and interval observers

  • Zarch, Majid Ghaniee
  • Puig, Vicenç
  • Poshtan, Javad
  • Shoorehdeli, Mahdi Aliyari
This paper proposes the use of interval observers and viability theory in fault detection and isolation (FDI). Viability theory develops mathematical and algorithmic methods for investigating the viability constraints characterisation of dynamic evolutions of complex systems under uncertainty. These methods can be used for checking the consistency between observed and predicted behaviour by using simple sets that approximate the exact set of possible behaviour (in the parameter or state space). In this paper, FDI is based on checking for an inconsistency between the measured and predicted behaviours using viability theory concepts and sets. Finally, an example is provided in order to show the usefulness of the proposed approach., This work was partially supported by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the projects ECOCIS (ref. DPI2013-48243- C2-1-R), DEOCS (ref. DPI2016-76493-C3-3-R) and HAR- CRICS (ref. DPI2014-58104-R)., Postprint, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Actuator fault tolerance evaluation approach of nonlinear model predictive control systems using viability theory

  • Zarch, Majid Ghaniee
  • Puig, Vicenç
  • Poshtan, Javad
  • Shoorehdeli, Mahdi Aliyari
In this paper, an approach to evaluate the actuator fault tolerance of a nonlinear model predictive control (NMPC) system using viability theory is proposed. Viability theory provides several concepts formulated in a set form (viability kernel and capture basin) that are very useful to assess if after the fault the NMPC controller will be able to achieve their goal either using a reconfiguration or an accommodation strategy. By representing the nonlinear model of the system in a linear parameter varying (LPV) form and using zonotopes to evaluate viability sets, an algorithm is developed and implemented that is able to assess the tolerance of the NMPC controller. To illustrate the proposed approach two application examples based on well-known control problems (a pasteurization plant and a mobile robot) are used., This work has been funded by the Spanish Ministry of Economy and Competitiveness (MINECO) and FEDER through the projects ECOCIS (Ref. DPDEOCS (ref. DPI2016-76493) and SCAV (ref. DPI2017-88403-R), the FPI grant (ref. BES-2014-068319), the María de Maeztu Seal of Excellence to IRI (ref. MDM-2016-0656), and by AGAUR of Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (ref. 2017-SGR-482)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Economic model predictive control based on a periodicity constraint

  • Wang, Ye
  • Salvador, José Ramón
  • Muñoz de la Peña, David
  • Puig, Vicenç
  • Cembrano, Gabriela
This paper addresses a novel economic model predictive control (MPC) formulation based on a periodicity constraint to achieve an optimal periodic operation for discrete-time linear systems. The proposed control strategy does not rely on forcing the terminal state by means of a terminal equality constraint and hence it does not require a priori knowledge of a periodic steady trajectory. Instead, at each sampling time step the economic cost function is optimized based on a periodicity constraint over all the periodic trajectories that include the current state. The recursive feasibility and the closed-loop convergence to a periodic steady trajectory are discussed. Moreover, an optimality certificate of this steady trajectory is provided based on the Karush–Kuhn–Tucker (KKT) optimality conditions. Finally, an application to a well-known water distribution network benchmark is presented to demonstrate the proposed economic MPC in which the closed-loop simulation results obtained with a linear model and a virtual–reality simulator are both provided., This work was partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the projects DEOCS (ref. DPI2016-76493) and SCAV (ref. DPI2017-88403-R), the FPI Grant (ref. BES-2014-068319), and by AGAUR of Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (ref. 2017-SGR-482)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Formal controller synthesis for wastewater systems with signal temporal logic constraints: The Barcelona case study

  • Farahani, Samira S.
  • Zadeh Soudjani, Sadegh Esmaeil
  • Majumdar, Rupak
  • Ocampo-Martínez, Carlos
We present an approach for formal controller synthesis of the Barcelona wastewater system. The goal of the controller is to minimize overflow in the system and to reduce environmental contamination (pollution). Due to the influence of sudden and unpredictable weather changes within the Mediterranean climate, we propose robust model predictive control strategy. This approach synthesizes control inputs (i.e., flows through network actuators) that make the system robust to uncertainties in the weather forecast; control inputs are updated in an online fashion to incorporate the newly available measurements from the system and the disturbances. We employ signal temporal logic as a formal mechanism to express the desired behavior of the system. The quantitative semantics of the logic is then used to encode the desired behavior in both the set of constraints and the objective function of the optimization problem. We propose a solution approach for the obtained worst-case optimization, which is based on transforming the nonlinear dynamics of the system into a mixed logical dynamical model. Then, we employ Monte Carlo sampling and dual reformulation to get a mixed integer linear or quadratic programming problem.The proposed approach is applied to a catchment of the Barcelona wastewater system to illustrate its effectiveness., The work of C. Ocampo-Martinez is partially supported by the project DEOCS (Ref. DPI2016-76493-C3-3-R) from the Spanish MINECO/FEDER., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Análisis y Diseño de Sistemas Lineales con Parámetros Variantes Utilizando LMIs, Analysis and design of linear parameter varying systems using LMIs

  • Rotondo, Damiano
  • Sánchez, Helem Sabina
  • Nejjari, Fatiha
  • Puig, Vicenç
[ES] En este articulo se presenta un tutorial sobre análisis y diseño de sistemas lineales con parámetros variantes (LPV) utilizando las desigualdades lineales matriciales (LMIs). Varias especificaciones, tales como la D-estabilidad, el desempeño H1 garantizado y el coste cuadrático garantizado, as´ı como tambi´en diferentes estructuras de control, tales como el control por realimentacion de estado, el control por realimentacion de salida y el control basado en observador, han sido consideradas. Para ilustrar de forma didáctica el desarrollo completo del diseño mediante LMIs, se utilizan un ejemplo numérico y un modelo simplificado de un helicóptero de dos grados de libertad (TRMS)., [EN] This paper presents a tutorial on analysis and design of linear parameter varying (LPV) systems using linear matrix inequalities (LMIs). Several specifications, such as D-stability, guaranteed H1 performance and guaranteed quadratic cost, as well as dierent control structures, such as state-feedback control, output-feedback control and observer-based control, are considered. A numerical example and a simplified model of a two-degrees-of-freedom helicopter (TRMS) are used to illustrate in a didactic manner the overall design methodology using LMIs., Este trabajo ha sido realizado gracias al apoyo de la Agencia Estatal de Investigacion (AEI) mediante el sello de excelencia cientıfica Marıa de Maetzu al IRI (ref. MDM-2016-0656), la ayuda Juan de la Cierva-Formación (ref. FJCI-2016-29019), y el apoyo de AEI y del Fondo Europeo de Desarrollo Regional (FEDER) a través de los proyectos DEOCS (ref. MINECO DPI2016-76493-C3-3-R) y SCAV (ref. MINECO DPI2017-88403-R)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A virtual actuator approach for the secure control of networked LPV systems under pulse-width modulated DoS attacks

  • Rotondo, Damiano
  • Sánchez, Helem Sabina
  • Puig, Vicenç
  • Escobet, Teresa
  • Quevedo, Joseba
In this paper, we formulate and analyze the problem of secure control in the context of networked linear parameter varying (LPV) systems. We consider an energy-constrained, pulse-width modulated (PWM) jammer, which corrupts the control communication channel by performing a denial-of-service (DoS) attack. In particular, the malicious attacker is able to erase the data sent to one or more actuators. In order to achieve secure control, we propose a virtual actuator technique under the assumption that the behavior of the attacker has been identified. The main advantage brought by this technique is that the existing components in the control system can be maintained without need of retuning them, since the virtual actuator will perform a reconfiguration of the plant, hiding the attack from the controller point of view. Using Lyapunov-based results that take into account the possible behavior of the attacker, design conditions for calculating the virtual actuators gains are obtained. A numerical example is used to illustrate the proposed secure control strategy., This work has been partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the projects SCAV (ref. MINECO DPI2017-88403-R) and DEOCS (ref. MINECO DPI2016-76493). This work has been also supported by the AEI through the Maria de Maeztu Seal of Excellence to IRI (MDM-2016- 0656) and the grant Juan de la Cierva-Formacion (FJCI-2016-29019).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Bibliographical review on cyber attacks from a control oriented perspective

  • Sánchez, Helem Sabina
  • Rotondo, Damiano
  • Escobet, Teresa
  • Puig, Vicenç
  • Quevedo, Joseba
This paper presents a bibliographical review of definitions, classifications and applications concerning cyber attacks in networked control systems (NCSs) and cyber-physical systems (CPSs). This review tackles the topic from a control-oriented perspective, which is complementary to information or communication ones. After motivating the importance of developing new methods for attack detection and secure control, this review presents security objectives, attack modeling, and a characterization of considered attacks and threats presenting the detection mechanisms and remedial actions. In order to show the properties of each attack, as well as to provide some deeper insight into possible defense mechanisms, examples available in the literature are discussed. Finally, open research issues and paths are presented., This work has been partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the projects SCAV (ref. MINECO DPI2017-88403-R) and DEOCS (ref. MINECO DPI2016-76493), and also by AGAUR ACCIO RIS3CAT UTILITIES 4.0 P7 SECUTIL. This work has been also supported by the AEI through the Maria de Maeztu Seal of Excellence to IRI (MDM-2016-0656) and the grant Juan de la Cierva-Formacion (FJCI-2016-29019).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Combining set-theoretic UIO and invariant sets for optimal guaranteed robust fault detection and isolation

  • Xu, Feng
  • Tan, Junbo
  • Wang, Ye
  • Puig, Vicenç
  • Wang, Xueqian
This paper proposes an optimal guaranteed robust fault detection and isolation (FDI) method combing the set-theoretic unknown input observer (SUIO) and the robust positively invariant (RPI) sets for linear time-invariant (LTI) systems. The optimality of the proposed FDI method is achieved under a two-layer framework. The first layer allows to design a single optimal FDI-oriented SUIO with RPI set separation-based guaranteed FDI conditions to reduce the FDI conservatism of single observer. The second layer consists in designing an optimal observer configuration for a bank of optimal SUIOs to reduce the FDI conservatism of all the SUIOs together. Finally, the effectiveness of the proposed guaranteed robust FDI method is illustrated by using a four-tank system., This work was partially supported by the National Natural Science Foundation of China (No. U1813216), the Science and Technology Research Foundation of Shenzhen (No. JCYJ20170412171459177 and No. JCYJ20170817152701660), and the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the project DEOCS (ref. DPI2016-76493-C3-3-R).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Data-driven approach for leak localization in water distribution networks using pressure sensors and spatial interpolation

  • Soldevila, Adrià
  • Blesa, Joaquim
  • Fernández Cantí, Rosa M.
  • Tornil-Sin, Sebastian
  • Puig, Vicenç
This paper presents a new data-driven method for leak localization in water distribution networks. The proposed method relies on the use of available pressure measurements in some selected internal network nodes and on the estimation of the pressure at the remaining nodes using Kriging spatial interpolation. Online leak localization is attained by comparing current pressure values with their reference values. Supported by Kriging; this comparison can be performed for all the network nodes, not only for those equipped with pressure sensors. On the one hand, reference pressure values in all nodes are obtained by applying Kriging to measurement data previously recorded under network operation without leaks. On the other hand, current pressure values at all nodes are obtained by applying Kriging to the current measured pressure values. The node that presents the maximum difference (residual) between current and reference pressure values is proposed as a leaky node candidate. Thereafter, a time horizon computation based on Bayesian reasoning is applied to consider the residual time evolution, resulting in an improved leak localization accuracy. As a data-driven approach, the proposed method does not need a hydraulic model; only historical data from normal operation is required. This is an advantage with respect to most data-driven methods that need historical data for the considered leak scenarios. Since, in practice, the obtained leak localization results will strongly depend on the number of available pressure measurements and their location, an optimal sensor placement procedure is also proposed in the paper. Three different case studies illustrate the performance of the proposed methodologies., This work has been funded by the Ministerio de Economía, Industria y Competitividad (MEICOMP) of the Spanish Government and FEDER through the project DEOCS (ref. DPI2016-76493) and SCAV (ref. DPI2017-88403-R), by MEICOMP and FEDER through the grant IJCI-2014-20801, and by the Catalan Agency for Management of University and Research Grants (AGAUR), the European Social Fund (ESF) and the Secretary of University and Research of the Department of Companies and Knowledge of the Government of Catalonia through the grant FI-DGR 2015 (ref. 2015 FI B 00591) and the Advanced Control Systems (SAC) group grant (2017 SGR 482). The second author acknowledges the support from the Serra Húnter program.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Data-driven decentralized algorithm for wind farm control with population-games assistance

  • Barreiro-Gómez, Julian
  • Ocampo-Martínez, Carlos
  • Bianchi, Fernando D.
  • Quijano, Nicanor
In wind farms, the interaction between turbines that operate close by experience some problems in terms of their power generation. Wakes caused by upstream turbines are mainly responsible of these interactions, and the phenomena involved in this case is complex especially when the number of turbines is high. In order to deal with these issues, there is a need to develop control strategies that maximize the energy captured from a wind farm. In this work, an algorithm that uses multiple estimated gradients based on measurements that are classified by using a simple distributed population-games-based algorithm is proposed. The update in the decision variables is computed by making a superposition of the estimated gradients together with the classification of the measurements. In order to maximize the energy captured and maintain the individual power generation, several constraints are considered in the proposed algorithm. Basically, the proposed control scheme reduces the communications needed, which increases the reliability of the wind farm operation. The control scheme is validated in simulation in a benchmark corresponding to the Horns Rev wind farm., This work has been partially funded by the Spanish projects SCAV (Ref. DPI2017-88403-R) and DEOCS (Ref. DPI2016-76493-C3-3-R) and the Colombian project ISAGEN Solución Energética Piloto La Guajira. J. Barreiro-Gomez gratefully acknowledges support from U.S. Air Force Office of Scientific Research under grant number FA9550-17-1-0259.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Detection of replay attacks in cyber-physical systems using a frequency-based signature

  • Sánchez, Helem Sabina
  • Rotondo, Damiano
  • Escobet, Teresa
  • Puig, Vicenç
  • Saludes, Jordi
  • Quevedo, Joseba
This paper proposes a frequency-based approach for the detection of replay attacks affecting cyber-physical systems (CPS). In particular, the method employs a sinusoidal signal with a time-varying frequency (authentication signal) into the closed-loop system and checks whether the time profile of the frequency components in the output signal are compatible with the authentication signal or not. In order to carry out this target, the couplings between inputs and outputs are eliminated using a dynamic decoupling technique based on vector fitting. In this way, a signature introduced on a specific input channel will affect only the output that is selected to be associated with that input, which is a property that can be exploited to determine which channels are being affected. A bank of band-pass filters is used to generate signals whose energies can be compared to reconstruct an estimation of the time-varying frequency profile. By matching the known frequency profile with its estimation, the detector can provide the information about whether a replay attack is being carried out or not. The design of the signal generator and the detector are thoroughly discussed, and an example based on a quadruple-tank process is used to show the application and effectiveness of the proposed method., This work has been partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the projects DEOCS (ref. MINECO DPI2016-76493) and SCAV (ref. MINECO DPI2017-88403-R), by AGAUR of the Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (2017 SGR 482) and by the AEI through the Maria de Maeztu Seal of Excellence to IRI (MDM-2016-0656) and the grant Juan de la Cierva-Formacion (FJCI-2016-29019).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Economic health-aware LPV-MPC based on system reliability assessment for water transport network

  • Karimi Pour, Fatemeh
  • Puig, Vicenç
  • Cembrano, Gabriela
This paper proposes a health-aware control approach for drinking water transport networks. This approach is based on an economic model predictive control (MPC) that considers an additional goal with the aim of extending the components and system reliability. The components and system reliability are incorporated into the MPC model using a Linear Parameter Varying (LPV) modeling approach. The MPC controller uses additionally an economic objective function that determines the optimal filling/emptying sequence of the tanks considering that electricity price varies between day and night and that the demand also follows a 24-h repetitive pattern. The proposed LPV-MPC control approach allows considering the model nonlinearities by embedding them in the parameters. The values of these varying parameters are updated at each iteration taking into account the new values of the scheduling variables. In this way, the optimization problem associated with the MPC problem is solved by means of Quadratic Programming (QP) to avoid the use of nonlinear programming. This iterative approach reduces the computational load compared to the solution of a nonlinear optimization problem. A case study based on the Barcelona water transport network is used for assessing the proposed approach performance., This work has been partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the projects SCAV (ref. MINECO DPI2017-88403-R) and DEOCS (ref. MINECO DPI2016-76493). This work has been also supported by the AEI through the Maria de Maeztu Seal of Excellence to IRI (MDM-2016-0656).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

FD-ZKF: A Zonotopic Kalman Filter optimizing fault detection rather than state estimation

  • Pourasghar, Masoud
  • Combastel, Christophe
  • Puig, Vicenç
  • Ocampo-Martínez, Carlos
Enhancing the sensitivity to faults with respect to disturbances, rather than optimizing the precision of the state estimation using Kalman Filters (KF) is the subject of this paper. The stochastic paradigm (KF) is based on minimizing the trace of the state estimation error covariance. In the context of the bounded-error paradigm using Zonotopic Kalman Filters (ZKF), this is analog to minimize the covariation trace. From this analogy and keeping a similar observer-based structure as in ZKF, a criterion jointly inspired by set-membership approaches and approximate decoupling techniques coming from parity-space residual generation is proposed. Its on-line maximization provides an optimal time-varying observer gain leading to the so-called FD-ZKF filter that allows enhancing the fault detection properties. The characterization of minimum detectable fault magnitude is done based on a sensitivity analysis. The effect of the uncertainty is addressed using a set-membership approach and a zonotopic representation reducing set operations to simple matrix calculations. A case study based on a quadruple-tank system is used both to illustrate and compare the effectiveness of the results obtained from the FD-ZKF approach compared to a pure ZKF approach., This work has been partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the projects DEOCS (ref. MINECO DPI2016-76493) and SCAV (ref. MINECO DPI2017-88403-R). This work has also been partially funded by AGAUR of Generalitat de Catalunya through the Advanced Control Systems (SAC) group Grant (2017 SGR 482) and by Agència de Gestió d’Ajuts Universitaris i de Recerca. Furthermore, the authors would like to thank Prof. A. Zolghadri for insightful discussions on ZKF extensions and applications within SysNum cluster activities (Idex Bordeaux, France).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Interval observer versus set-membership approaches for fault detection in uncertain systems using zonotopes

  • Pourasghar, Masoud
  • Puig, Vicenç
  • Ocampo-Martínez, Carlos
This paper presents both analysis and comparison of the interval observer–based and set-membership approaches for the state estimation and fault detection (FD) in uncertain linear systems. The considered approaches assume that both state disturbance and measurement noise are modeled in a deterministic context following the unknown but bounded approach. The propagation of uncertainty in the state estimation is bounded through a zonotopic set representation. Both approaches have been mathematically related and compared when used for state estimation and FD. A case study based on a two-tanks system is employed for showing the relationship between both approaches while comparing their performance., Spanish State Research Agency (AEI)through the María de Maeztu Seal ofExcellence to IRI, Grant/Award Number:MDM-2016-0656; European RegionalDevelopment Fund (ERFD); DEOCS,Grant/Award Number: MINECO DPI2016-76493; SCAV, Grant/AwardNumber: MINECO DPI2017-88403-R;AGAUR of Generalitat de Catalunyathrough the Advanced Control Systems(SAC) group, Grant/Award Number: 2017SGR 482; Agència de Gestió d'AjutsUniversitaris i de Recerca
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Model predictive control and moving horizon estimation for water level regulation in inland waterways

  • Segovia Castillo, Pablo
  • Rajaoarisoa, Lala
  • Nejjari, Fatiha
  • Duviella, Eric
  • Puig, Vicenç
This work regards the design of optimization techniques for the purposes of state estimation and control in the framework of inland waterways, often characterized by negligible bottom slopes and large time delays. The derived control-oriented model allows these issues to be handled in a suitable manner. Then, the analogous moving horizon estimation and model predictive control techniques are applied in a centralized manner to estimate the unmeasurable states and fulfill the operational goals, respectively. Finally, the performance of the methodology is tested in simulation by means of a realistic case study based on part of the inland waterways in the north of France. The results show that the proposed methodology is able to guarantee the navigability condition, as well as the other operational goals., This work has been partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the projects DEOCS (ref. MINECO DPI2016-76493) and SCAV (ref. MINECO DPI2017-88403-R). This work has also been partially funded by AGAUR of Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (2017 SGR 482).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Optimal state observation using quadratic boundedness: Application to UAV disturbance estimation

  • Cayero, Julián
  • Rotondo, Damiano
  • Morcego, Bernardo
  • Puig, Vicenç
This paper presents the design of a state observer which guarantees quadratic boundedness of the estimation error. By using quadratic Lyapunov stability analysis, the convergence rate and the ultimate (steady-state) error bounding ellipsoid are identified as the parameters that define the behaviour of the estimation. Then, it is shown that these objectives can be merged in a scalarised objective function with one design parameter, making the design problem convex. In the second part of the article, a UAV model is presented which can be made linear by considering a particular state and frame of reference. The UAV model is extended to incorporate a disturbance model of variable size. The joint model matches the structure required to derive an observer, following the lines of the proposed design approach. An observer for disturbances acting on the UAV is derived and the analysis of the performances with respect to the design parameters is presented. The effectiveness and main characteristics of the proposed approach are shown using simulation results., This work has been partially funded by the Spanish Government and FEDER through the projects CICYT DEOCS and SCAV (refs. MINECO DPI2016-76493, DPI2017-88403-R). It has also been partially funded by AGAUR of Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (2017 SGR 482), and by AGAUR and the Spanish Research Agency through the Maria de Maetzu Seal of Excellence to IRI (MDM-2016-0656). Julian Cayero is also supported by Secretaria d’Universitats i Recerca del Departament d’Empresa i Coneixement de la Generalitat de Catalunya, the European Social Fund (ESF) and the Agency for Management of University and Research Grants (AGAUR) under an FI-DGR grant (ref. 2016FI_B1 00024). Damiano Rotondo is also supported by a Juan de la Cierva-Formacion grant (FJCI-2016-29019).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Reachability and stabilization of scheduled steady-states for LPV single-input systems

  • Corona, Darío
  • Cristofaro, Andrea
  • Rotondo, Damiano
The aim of this work is characterizing the class of LPV systems that admit steady-state trajectories depending exclusively on the scheduling parameter. In particular, it will be shown that only certain parameter dependent steady-state profiles are admissible and can be reached by means of a suitable control input. Furthermore, the asymptotic stability and the stabilization of such steady-states is investigated using Lyapunov-based techniques. Extensive numerical simulations illustrate and corroborate the theoretical results., This work has been partially funded by the Spanish Government and FEDER through the project CICYT DEOCS (ref. DPI2016-76493-C3-3-R), by AGAUR of the Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (2017 SGR 482), and by the Spanish State Research Agency through the Maria de Maeztu Seal of Excellence to IRI (MDM-2016-0656) and the grant Juan de la Cierva-Formacion (FJCI-2016-29019).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Robust economic model predictive control based on a periodicity constraint

  • Wang, Ye
  • Muñoz de la Peña, David
  • Puig, Vicenç
  • Cembrano, Gabriela
This paper proposes robust economic model predictive control based on a periodicity constraint for linear systems subject to unknown-but-bounded additive disturbances. In this economic MPC design, a periodic steady-state trajectory is not required and thus assumed unknown, which precludes the use of enforcing terminal state constraints as in other standard economic formulations. Instead, based on the desired periodicity of system operation, we optimize the economic performance over a set of periodic trajectories that include the current state. To achieve robust constraint satisfaction, we use a tube-based technique in the economic MPC formulation. The mismatches between the nominal model and the closed-loop system with perturbations are limited using a local control law. With the proposed robust tube-based strategy, recursive feasibility is guaranteed. Moreover, under a convexity assumption, the closed-loop convergence of the closed-loop system is analyzed, and an optimality certificate is provided to check if the closed-loop trajectory reaches a neighborhood of the optimal nominal periodic steady trajectory using Karush-Kuhn-Tucker optimality conditions. Finally, through numerical examples, we show the effectiveness of the proposed approach., This work was supported in part by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through projects DEOCS (DPI2016‐76493‐C3) and SCAV (DPI2017‐88403‐R), the FPI grant (BES‐2014‐068319), and in part by AGAUR of Generalitat de Catalunya through the Advanced Control Systems (SAC) group under grant (2017‐SGR‐482).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Robust fault and icing diagnosis in unmanned aerial vehicles using LPV interval observers

  • Rotondo, Damiano
  • Cristofaro, Andrea
  • Arne Johansen, Tor
  • Nejjari, Fatiha
  • Puig, Vicenç
This paper proposes a linear parameter varying (LPV) interval unknown input observer for the robust fault diagnosis of actuator faults and ice accretion in unmanned aerial vehicles (UAVs) described by an uncertain model. The proposed interval observer evaluates the set of values for the state, which are compatible with the nominal fault-free and icing-free operation and can be designed in such a way that some information about the nature of the unknown inputs affecting the system can be obtained, thus allowing the diagnosis to be performed. The proposed strategy has several advantages. First, the LPV paradigm allows taking into account operating point variations. Second, the noise rejection properties are enhanced by the presence of the integral term. Third, the interval estimation property guarantees the absence of false alarms. Linear matrix inequality–based conditions for the analysis/design of these observers are provided in order to guarantee the interval estimation of the state and the boundedness of the estimation. The developed theory is supported by simulation results, obtained with the uncertain model of a Zagi Flying Wing UAV, which illustrate the strong appeal of the methodology for identifying correctly unexpected changes in the system dynamics due to actuator faults or icing., EEA Financial Mechanism by a grantfrom Iceland, Liechtenstein, and Norway;Universidad Complutense de Madrid,Grant/Award Number:006-ABEL-IM-2014B; Spanish StateResearch Agency (AEI) and the EuropeanRegional Development Fund (ERFD),Grant/Award Numbers: CICYT DEOCSDPI2016-76493 and CICYT SCAVDPI2017-88403-R; DGR of the Generalitatde Catalunya, Grant/Award Number:2017/SGR/482; Spanish State ResearchAgency through the María de Maeztu Sealof Excellence to IRI, Grant/AwardNumber: MDM-2016-0656; Juan de laCierva Formación, Grant/Award Number:FJCI-2016-29019; Research Council ofNorway through the Centres of Excellencefunding scheme, Grant/Award Number:223254-AMOS; ERCIM Alain BensoussanFellowship programme
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Robust fault detection and isolation based on zonotopic unknown input observers for discrete-time descriptor systems

  • Wang, Ye
  • Puig, Vicenç
  • Xu, Feng
  • Cembrano, Gabriela
In this paper, we propose a robust fault detection and isolation (FDI) strategy based on zonotopic unknown input observers (UIOs) for discrete-time descriptor linear time-varying (LTV) systems subject to uncertainties and additive actuator faults. System uncertainties including state disturbances and measurement noise are unknown but bounded by predefined zonotopes. The uncertain state estimations and constructed residuals for robust FDI are propagated in a sequence of zonotopes. Based on a defined performance criterion, the fault detection (FD) observer gain is designed to be robust against uncertainties and meanwhile sensitive to faults. The explicit computational method for the FD observer gain is derived. In addition to include fault isolation, a bank of zonotopic UIOs are employed. Finally, we apply the proposed method into two case studies to show its effectiveness., This work was partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the project DEOCS (ref. DPI2016-76493-C3-3-R) and the FPI grant (ref. BES-2014-068319), and by the Basic Research Project of Shenzhen under the grant (ref. JCYJ20170412171459177).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Set-invariance characterizations of discrete-time descriptor systems with application to active mode detection

  • Wang, Ye
  • Olaru, Sorin
  • Valmorbida, Giorgio
  • Puig, Vicenç
  • Cembrano, Gabriela
In this paper, we study robust invariant set characterizations of discrete-time descriptor systems and propose an active mode detection mechanism for discrete-time descriptor systems considering multiple modes of operation. The considered class of descriptor systems assumes regularity, stability and is affected by unknown-but-bounded disturbances. As a first theoretical result, we establish a general framework for robust invariant sets for discrete-time descriptor systems in both causal and non-causal cases. Particular transformations are subsequently proposed for handling causal and non-causal descriptor systems and will be used to characterize the effects of disturbances. Based on these set-theoretic notions and a designed input signal for active set separations, we propose an active mode detection mechanism by exploiting the strong invariance properties., This work was partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the project DEOCS (ref. DPI2016-76493-C3-3-R), the FPI grant (ref. BES-2014-068319), the FPI mobility grants (ref. EEBB-I-17-12257 and EEBB-I-18-12900), and by a grant of Ministry of Research and Innovation, CNCS - UEFISCDI, Romania project number PN-III-P1-1.1-TE-2016-0862, MOSCBIOS, within PNCDI III.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Time-varying partitioning for predictive control design: Density-games approach

  • Barreiro-Gómez, Julian
  • Ocampo-Martínez, Carlos
  • Quijano, Nicanor
The design of distributed optimization-based controllers for large-scale systems (LSSs) implies every time new challenges. The fact that LSSs are generally located throughout large geographical areas makes difficult the recollection of measurements and their transmission. In this regard, the communication network that is required for a centralized control approach might have high associated economic costs. Furthermore, the computation of a large amount of data implies a high computational burden to manage, process and use them in order to make decisions over the system operation. A plausible solution to mitigate the aforementioned issues associated with the control of LSSs consists in dividing this type of systems into smaller sub-systems able to be handled by independent local controllers. This paper studies two fundamental components of the design of distributed optimization-based controllers for LSSs, i.e., the system partitioning and distributed optimization algorithms. The design of distributed model predictive control (DMPC) strategies with a system partitioning and by using density-dependent population games (DDPG) is presented., Julian Barreiro-Gomez gratefully acknowledges support from U.S. Air Force Office of Scientific Research under grant number FA9550-17-1-0259. The work of Carlos Ocampo-Martinez is partially supported by the project DEOCS (Ref. DPI2016-76493-C3-3-R) from the Spanish MINECO/FEDER. Authors also thank the second stage of the project Pavco-Mexichem-Colciencias.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Zonotopic set-membership state estimation for discrete-time descriptor LPV systems

  • Wang, Ye
  • Wang, Zhenhua
  • Puig, Vicenç
  • Cembrano, Gabriela
This technical note proposes a novel set-membership state estimation approach based on zonotopes for discrete-time descriptor linear parameter-varying systems. The consistency test between the system model and measured outputs is implemented to construct a parameterized intersection zonotope with respect to a correction matrix. With a defined zonotope minimization criterion, we propose a novel offline optimization problem to obtain the optimal correction matrix. In addition, with the proposed approach, an adaptive bound of the radius of the intersection zonotope is also provided. Finally, a case study with a truck-trailer system is shown to illustrate the proposed approach., This work was partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the projects DEOCS (ref. DPI2016-76493-C3-3-R) and SCAV (ref. DPI2017-88403-R), the FPI grant (ref. BES-2014-068319). Z. Wang was supported by National Natural Science Foundation of China (Grant No. 61273162, 61403104).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Actuator and sensor fault estimation based on a proportional-integral quasi-LPV observer with inexact scheduling parameters

  • Gómez-Peñate, Samuel
  • López-Estrada, Francisco-Ronay
  • Valencia-Palomo, Guillermo
  • Rotondo, Damiano
Trabajo presentado en el 3rd IFAC Workshop on Linear Parameter-Varying Systems, celebrado en Eindhoven (Países Bajos), del 4 al 6 de noviembre de 2019, This paper presents a method for actuator and sensor fault estimation based on a proportional-integral observer (PIO) for a class of nonlinear system described by a polytopic quasi-linear parameter varying (qLPV) mathematical model. Contrarily to the traditional approach, which considers measurable or unmeasurable scheduling parameters, this work proposes a methodology that considers inexact scheduling parameters. This condition is present in many physical systems where the scheduling parameters can be affected by noise, offsets, calibration errors, and other factors that have a negative impact on the measurements. A H¿ performance criterion is considered in the design in order to guarantee robustness against sensor noise, disturbance, and inexact scheduling parameters. Then, a set of linear matrix inequalities (LMIs) is derived by the use of a quadratic Lyapunov function. The solution of the LMI guarantees asymptotic stability of the PIO. Finally, the performance and applicability of the proposed method are illustrated through a numerical experiment in a nonlinear system., This work is supported by Tecnologico Nacional de Mexico and the National Council of Science and Technology (CONACyT). The support is gratefully acknowledged. This work has been also partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the projects SCAV (ref. MINECO DPI2017-88403-R) and DEOCS (ref. MINECO DPI2016-76493), and by the AEI through the Maria de Maeztu Seal of Excellence to IRI (MDM-2016-0656) and the grant Juan de la Cierva-Formacion (FJCI-2016-29019).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A feedback simulation procedure for real-time control of urban drainage systems

  • Romero Ben, Luis
  • Sun, Congcong
  • Guasch Palma, Ramon
  • Joseph-Duran, Bernat
  • Meseguer, Jordi
  • Cembrano, Gabriela
  • Puig, Vicenç
Trabajo presentado en el 1st IFAC Workshop on Control Methods for Water Resource Systems CMWRS, celebrado en Delft (Países Bajos), los días 19 y 20 de septiembre de 2019, This paper presents a feedback simulation procedure for the real-time control (RTC) of urban drainage systems (UDS) with the aim of providing accurate state evolutions to the RTC optimizer as well as illustrating the optimization performance in a virtual reality. Model predictive control (MPC) has been implemented to generate optimal solutions for the multiple objectives of UDS using a simplified conceptual model. A high-fidelity simulator InfoWorks ICM is used to carry on the simulation based on a high level detailed model of a UDS. Communication between optimizer and simulator is realized in a feedback manner, from which both the state dynamics and the optimal solutions have been implemented through realistic demonstrations. In order to validate the proposed procedure, a real pilot based on Badalona UDS has been applied as the case study., The authors wish to thank the support by the European Commission research grant of project LIFE EFFIDRAIN (LIFE14 ENV/ES/000860), also thank the support from Spanish national project DEOCS (DPI2016-76493-C3-3-R). The authors also want to thank Aigües de Barcelona for the financial and technical support. This work is also supported by the Spanish State Research Agency through the María de Maeztu Seal of Excellence to IRI (MDM-2016-0656).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

An LMI-based heuristic algorithm for vertex reduction in LPV systems

  • Sanjuan, Adrián
  • Rotondo, Damiano
  • Nejjari, Fatiha
  • Sarrate, Ramon
The linear parameter varying (LPV) approach has proved to be suitable for controlling many non-linear systems. However, for those which are highly non-linear and complex, the number of scheduling variables increases rapidly. This fact makes the LPV controller implementation not feasible for many real systems due to memory constraints and computational burden. This paper considers the problem of reducing the total number of LPV controller gains by determining a heuristic methodology that combines two vertices of a polytopic LPV model such that the same gain can be used in both vertices. The proposed algorithm, based on the use of the Gershgorin circles, provides a combinability ranking for the different vertex pairs, which helps in solving the reduction problem in fewer attempts. Simulation examples are provided in order to illustrate the main characteristics of the proposed approach., This work has been funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the projects DEOCS (ref. MINECO DPI2016-76493) and SCAV (ref. MINECO DPI2017-88403-R), by AGAUR through the contract FI-AGAUR (ref. 2017FI-B00285) and by the DGR of Generalitat de Catalunya (SAC group Ref. 2017/SGR/482). This work has also been supported by the Spanish State Research Agency through the Maria de Maeztu Seal of Excellence to IRI (MDM-2016-0656) and the grant Juan de la Cierva—Formación (FJCI-2016-29019).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A review of convex approaches for control, observation and safety of linear parameter varying and Takagi-Sugeno systems

  • López-Estrada, Francisco-Ronay
  • Rotondo, Damiano
  • Valencia-Palomo, Guillermo
This paper provides a review about the concept of convex systems based on Takagi-Sugeno, linear parameter varying (LPV) and quasi-LPV modeling. These paradigms are capable of hiding the nonlinearities by means of an equivalent description which uses a set of linear models interpolated by appropriately defined weighing functions. Convex systems have become very popular since they allow applying extended linear techniques based on linear matrix inequalities (LMIs) to complex nonlinear systems. This survey aims at providing the reader with a significant overview of the existing LMI-based techniques for convex systems in the fields of control, observation and safety. Firstly, a detailed review of stability, feedback, tracking and model predictive control (MPC) convex controllers is considered. Secondly, the problem of state estimation is addressed through the design of proportional, proportional-integral, unknown input and descriptor observers. Finally, safety of convex systems is discussed by describing popular techniques for fault diagnosis and fault tolerant control (FTC)., This work has been supported by Tecnológico Nacional de México grants 6723.18-P and 5400.19-P, the Instituto de Ciencia Tecnológia e Innovación, Chiapas (ICTIECH) 1123/2019. This work has been partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the projects SCAV (ref. MINECO DPI2017-88403-R) and DEOCS (ref. MINECO DPI2016-76493), and also by AGAUR ACCIO RIS3CAT UTILITIES 4.0 – P7 SECUTIL. This work has been also supported by the AEI through the Maria de Maeztu Seal of Excellence to IRI (MDM-2016-0656) and the grant Juan de la Cierva-Formacion (FJCI-2016-29019).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Interval observer-based fault detectability analysis using mixed set-invariance theory and sensitivity analysis approach

  • Pourasghar, Masoud
  • Puig, Vicenç
  • Ocampo-Martínez, Carlos
This paper addresses the characterisation of the minimum detectable fault (MDF) by means of residual sensitivity integrated with the set-invariance theory when using an interval observer-based approach as a fault detection (FD) scheme. Uncertainties (disturbances and noise) are considered as of unknown but bounded nature (i.e. in the set-membership framework). A zonotopic-set representation towards reducing set operations to simple matrix calculations is utilised to bound the state/output estimations provided by the interval observer-based approach. In order to show the connection between sensitivity and set-invariance analyses, mathematical expressions of the MDF are derived when considering different types of faults. Finally, a simulation case study based on a quadruple-tank system is employed to both illustrate and discuss the effectiveness of the proposed approach. The interval observer-based FD scheme is used to test the MDF obtained from the integration of both residual sensitivity analysis and set-invariance theory in the considered case study., This work has been partially funded by the Spanish Government (MINECO) through the project DEOCS (ref. DPI2016-76493-C3-3-R), by MINECO and FEDER through the project HARCRICS (ref. DPI2014-58104-R) and by Ag`encia de Gesti´o d’Ajuts Universitaris i de Recerca.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Characterisation of interval-observer fault detection and isolation properties using the set-invariance approach

  • Pourasghar, Masoud
  • Puig, Vicenç
  • Ocampo-Martínez, Carlos
The aim of this paper is to provide a robust Fault Detection and Isolation (FDI) approach that combines the set-invariance approach with a zonotopic interval observer. The effect of the uncertainty is taken into account considering zonotopic-set representations in both the transient and steady states. The set-invariance approach is used to characterize the fault detectability and isolability properties in the steady-state operation of the system. In particular, the Minimum Detectable Fault (MDF) and the Minimum Isolable Fault (MIF) are characterized for several type of faults in separate formulations utilizing the integration of classical sensitivity analysis and set-invariance approaches. Finally, a simulation example based on a two-tanks system is employed to both illustrate and discuss the effectiveness of the proposed approach., This work has been partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the projects DEOCS (ref. MINECO DPI2016-76493) and SCAV (ref. MINECO DPI2017-88403-R). This work has also been partially funded by AGAUR of Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (2017 SGR 482) and by Agència de Gestió d’Ajuts Universitaris i de Recerca., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

On robust interval observer design for uncertain systems subject to both time-invariant and time-varying uncertainties

  • Pourasghar, Masoud
  • Puig, Vicenç
  • Ocampo-Martínez, Carlos
This paper proposes the design of an interval observer-based approach for linear dynamic systems affected by both time-invariant and time-varying uncertainties. First, different interval observer schemes are compared and analysed when dealing with the different types of uncertainties. Then, an integrated interval observer is proposed in order to overcome the drawbacks of using the set-based approach, i.e. the non-preservation of the parameter uncertainty time dependency and the wrapping effect. Furthermore, H∞ performance is considered in order to compute the observer gain by using an LMI technique. Finally, a numerical example and a real case study based on a two-tank system are employed for both illustrating and analysing the effectiveness of the proposed approach., This work has been partially funded by the Spanish Government (MINECO) through the project DEOCS (ref. DPI2016-76493-C3-3-R), by MINECO and FEDER through the project SCAV (ref. MINECO DPI2017-88403-R) and by Agència de Gestió d'Ajuts Universitaris i de Recerca., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Fault detection for uncertain LPV systems using probabilistic set-membership parity relation

  • Wan, Yiming
  • Puig, Vicenç
  • Ocampo-Martínez, Carlos
  • Wang, Ye
  • Harinath, Eranda
  • Braatz, Richard D.
This paper considers fault detection of uncertain linear parameter varying systems that have polynomial dependence on parametric uncertainties. A conventional set-membership (SM) approach is able to ensure zero false alarm rate (FAR) by using conservative threshold sets, but usually results in a high missed detection rate (MDR) due to equally treating all uncertainty realizations without distinguishing between high and low probability of occurrence. To address this limitation, a probabilistic SM parity relation approach is proposed to exploit probabilistic information on the parametric uncertainties, which results in a reduced MDR by admitting an acceptable FAR. The parity relation is first polynomially parameterized with respect to uncertain parameters. Then, Gaussian mixtures are adopted to efficiently compute uncertainty propagation from stochastic uncertainties to the residual distribution. To achieve an acceptable FAR, a non-convex confidence set of residuals – represented by a union of ellipsoids – is determined for the consistency test. The effectiveness of the proposed approach is illustrated using a continuous stirred tank reactor example including performance comparisons with a deterministic zonotope-based method., This work is supported by the National Natural Science Foundation of China, Grant No. 61803163 and No. 61603024. It is also partially supported by the Spanish project DEOCS (ref. MINECO DPI2016-76493).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Factors influencing the stormwater quality model of sewer networks and a case study of Louis Fargue urban catchment in Bordeaux, France

  • Sun, Congcong
  • Parellada, Benjamí
  • Feng, Jing
  • Puig, Vicenç
  • Cembrano, Gabriela
Pollution caused by combined sewer overflows has become a global threat to the environment. Under this challenge, quality-based real-time control (RTC) is considered as an effective approach to minimize pollution through generating optimal operation strategies for the sewer infrastructure. To suit the fast computation requirement of RTC implementation, simplified quality models are required. However, due to the hydrological complexity, it is not easy to develop simplified quality models which are amenable to be used in real-time computations. Under this context, this paper contributes a preliminary analysis of influencing factors for the quality models of sewer networks in order to give supportive knowledge for both model development and application. Conceptual quality models which were proposed previously by the authors, with total suspended solids (TSS) as quality indicator, are used in this study. A clustering algorithm is used for exploratory analysis. Further analysis about the correlations between different factors and model performance is also carried out. The study and analysis are demonstrated on a real pilot based on the Louis Fargue urban catchment in Bordeaux. Conclusive results about the influencing factors, flow rate, rain intensity and pipe length, as well as their correlations with the TSS models are elaborated., The authors wish to thank the support received by the European Commission research grant of project LIFE EFFIDRAIN (LIFE14 ENV/ES/000860), and the support from Spanish national project DEOCS (DPI2016-76493-C3-3-R). The authors also want to thank Bordeaux Metropole and Aigües de Barcelona for the financial and technical support. This work is also supported by the Spanish State Research Agency through the María de Maeztu Seal of Excellence to IRI (MDM-2016-0656), by the Institute of Robotics Industry through the TWINs project.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Health-aware control design based on remaining useful life estimation for autonomous racing vehicle

  • Karimi Pour, Fatemeh
  • Theilliol, Didier
  • Puig, Vicenç
  • Cembrano, Gabriela
The accurate estimation of the State of Charge (SOC) and an acceptable prediction of the Remaining Useful Life (RUL) of batteries in autonomous vehicles are essential for safe and lifetime optimized operation. The estimation of the expected RUL is quite helpful to reduce maintenance cost, safety hazards, and operational downtime. This paper proposes an innovative health-aware control approach for autonomous racing vehicles to simultaneously control it to the driving limits and to follow the desired path based on maximization of the battery RUL. To deal with the non-linear behavior of the vehicle, a Linear Parameter Varying (LPV) model is developed. Based on this model, a robust controller is designed and synthesized by means of the Linear Matrix Inequality (LMI) approach, where the general objective is to maximize progress on the track subject to win racing and saving energy. The main contribution of the paper consists in preserving the lifetime of battery and optimizing a lap time to achieve the best path of a racing vehicle. The control design is divided into two layers with different time scale, path planner and controller. The first optimization problem is related to the path planner where the objective is to optimize the lap time and to maximize the battery RUL to obtain the best trajectory under the constraints of the circuit. The proposed approach is formulated as an optimal on-line robust LMI based Model Predictive Control (MPC) that steered from Lyapunov stability. The second part is focused on a controller gain synthesis solved by LPV based on Linear Quadratic Regulator (LPV-LQR) problem in LMI formulation with integral action for tracking the trajectory. The proposed approach is evaluated in simulation and results show the effectiveness of the proposed planner for optimizing the lap time and especially for maximizing the battery RUL., This work has been partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the projects DEOCS (ref. MINECO DPI2016-76493) and SCAV (ref. MINECO DPI2017-88403-R). This work has also been partially funded by AGAUR of Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (2017 SGR 482)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Integrated pollution-based real-time control of sanitation systems

  • Sun, Congcong
  • Romero Ben, Luis
  • Joseph-Duran, Bernat
  • Meseguer, Jordi
  • Muñoz, Eduard
  • Guasch Palma, Ramon
  • Martínez, Montse
  • Puig, Vicenç
  • Cembrano, Gabriela
An integrated pollution-based real-time control (RTC) approach is proposed for a sewer network (SN) integrated with wastewater treatment plants (WWTPs) in a sanitation system (SS) to mitigate the impacts of pollution from combined sewer overflows (CSOs) on ecosystems. To obtain the optimal solution for the SS while considering both quantity and quality dynamics for multiple objectives, model predictive control (MPC) is selected as the optimal control method. To integrate SN and WWTP management, a feedback coordination algorithm is developed. A closed-loop virtual-reality simulator is used to assess the results of the optimal management approach achieved by applying MPC. The Badalona SS (Spain) provides a pilot case study to assess the efficacy and applicability of the proposed approach. A comparison with local rule-based and volume-based control strategies currently in use indicates that the proposed integrated pollution-based RTC approach can reduce the pollutant loads released to the receiving environment., The authors wish to acknowledge the support from the European Commission research grant of project LIFE EFFIDRAIN (LIFE14 ENV/ES/000860), from Spanish national project DEOCS (MINECO DPI 2016-76493) and the internal project TWINs from the Spanish State Research Agency through the María de Maeztu Seal of Excellence to IRI (MDM-2016-0656). The authors also thank Aigües de Barcelona for their financial and technical support. Considering the fact that data, models and tools used in this research are confidential or commercial, we refer other researchers to contact SUEZ Spain Group (for access to detailed, simplified models; the Closed-loop Simulation Framework software; and the rain data) and Innovyze (for licenses to InfoWorks ICM).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Leak localization in water distribution networks using pressure and data-driven classifier approach

  • Sun, Congcong
  • Parellada, Benjamí
  • Puig, Vicenç
  • Cembrano, Gabriela
Leaks in water distribution networks (WDNs) are one of the main reasons for water loss during fluid transportation. Considering the worldwide problem of water scarcity, added to the challenges that a growing population brings, minimizing water losses through leak detection and localization, timely and effciently using advanced techniques is an urgent humanitarian need. There are numerous methods being used to localize water leaks in WDNs through constructing hydraulic models or analyzing flow/pressure deviations between the observed data and the estimated values. However, from the application perspective, it is very practical to implement an approach which does not rely too much on measurements and complex models with reasonable computation demand. Under this context, this paper presents a novel method for leak localization which uses a data-driven approach based on limit pressure measurements in WDNs with two stages included: (1) Two different machine learning classifiers based on linear discriminant analysis (LDA) and neural networks (NNET) are developed to determine the probabilities of each node having a leak inside a WDN; (2) Bayesian temporal reasoning is applied afterwards to rescale the probabilities of each possible leak location at each time step after a leak is detected, with the aim of improving the localization accuracy. As an initial illustration, the hypothetical benchmark Hanoi district metered area (DMA) is used as the case study to test the performance of the proposed approach. Using the fitting accuracy and average topological distance (ATD) as performance indicators, the preliminary results reaches more than 80% accuracy in the best cases., This work has been funded by the Ministerio de Economa, Industria y Competitividad (MEINCOP) of the Spanish Government through the project DEOCS (ref. DPI2016-76493) by MEICOMP and FEDER, through the grant IJCI-2014-20801 and by the Catalan Agency for Management of University and Research Grants (AGAUR), the European Social Fund (ESF) and the Secretary of University and Research of the Department of Companies and Knowledge of the Government of Catalonia through the grants FI-DGR 2015 (ref. 2015 FI_B 00591). Besides, this work has also been supported by the Spanish State Research Agency through the María de Maeztu Seal of Excellence to IRI (MDM-2016-0656).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Robust economic model predictive control based on a zonotope and local feedback controller for energy dispatch in smart-grids considering demand uncertainty

  • Nassourou, M.
  • Blesa, Joaquim
  • Puig, Vicenç
Electrical smart grids are complex MIMO systems whose operation can be noticeably affected by the presence of uncertainties such as load demand uncertainty. In this paper, based on a restricted representation of the demand uncertainty, we propose a robust economic model predictive control method that guarantees an optimal energy dispatch in a smart micro-grid. Load demands are uncertain, but viewed as bounded. The proposed method first decomposes control inputs into dependent and independent components, and then tackles the effect of demand uncertainty by tightening the system constraints as the uncertainty propagates along the prediction horizon using interval arithmetic and local state feedback control law. The tightened constraints’ upper and lower limits are computed off-line. The proposed method guarantees stability through a periodic terminal state constraint. The method is faster and simpler compared to other approaches based on Closed-loop min–max techniques. The applicability of the proposed approach is demonstrated using a smart micro-grid that comprises a wind generator, some photovoltaic (PV) panels, a diesel generator, a hydroelectric generator and some storage devices linked via two DC-buses, from which load demands can be adequately satisfied., This work has been partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the projects DEOCS (ref. MINECO DPI2016-76493) and SCAV (ref. MINECO DPI2017-88403-R). This work has also been partially funded by AGAUR of Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (2017 SGR 482). J. Blesa acknowledges the support from the Serra Húnter program.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

An integrated software architecture for the pollution-based real-time control of urban drainage systems

  • Romero Ben, Luis
  • Joseph-Duran, Bernat
  • Sun, Congcong
  • Meseguer, Jordi
  • Cembrano, Gabriela
  • Guasch Palma, Ramon
  • Martínez, Montse
  • Puig, Vicenç
This paper presents a complete methodology for the development of an integrated software architecture, which can achieve a closed-loop application between the integrated real-time control (RTC) and a virtual reality simulation for the urban drainage system (UDS). Quality measurements are considered during the simulation and optimization process. Model predictive control (MPC) and rule-based control (RBC) are the two main RTC methods embedded in this architecture. The proposed integration environment allows the different software components to efficiently and effectively communicate and work in a system-wide way, as well as to execute all the necessary steps regarding input parameter management, scenario configuration and results extraction. The proposed approaches are implemented into a pilot based on the Badalona UDS (Spain). Results from different scenarios with individual control approaches and rain episodes are evaluated and discussed., The authors want to thank the Spanish national project DEOCS (DPI2016-76493-C3-3-R) and the European Commission research grant of project LIFE EFFIDRAIN (LIFE14 ENV/ES/000860) for the received support. Besides, the authors are grateful for support from Aigües de Barcelona. This work is also supported by the Spanish State Research Agency through the María de Maeztu Seal of Excellence to IRI (MDM-2016-0656).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Control-oriented quality modelling approach of sewer networks

  • Sun, Congcong
  • Romero Ben, Luis
  • Joseph-Duran, Bernat
  • Meseguer, Jordi
  • Guasch Palma, Ramon
  • Martínez, Montse
  • Puig, Vicenç
  • Cembrano, Gabriela
A control-oriented quality modeling approach is proposed for sewer networks, which can represent quality dynamics using simple equations in order to optimize pollution load from combined sewer overflows in large scale sewer network in real time. Total suspended solid has been selected as the quality indicator, regarding it is easy to be estimated through measuring turbidity and correlated with other quality indicators. The model equations are independent for different elements in sewer network, which allows a scalable usage. In order to ensure accuracy of the proposed models, a calibration procedure and a sensitivity analysis have been presented using data generated by virtual reality simulation. Afterwards, a quality-based model predictive control has been developed based on the proposed models. To validate effectiveness and efficiency of the modelling and optimization approaches, a pilot case, based on the Badalona sewer network in Spain is used. Application results under different scenarios show that the control-oriented modelling approach works properly to cope with quality dynamics in sewers. The quality-based optimization approach can provide strategies in reducing pollution loads in real time., The authors wish to acknowledge the support from the European Commission research grant of project LIFE EFFIDRAIN (LIFE14 ENV/ES/000860), from Spanish national project DEOCS (DPI2016-76493-C3-3-R) and the internal project TWINs from the CISC (Spanish State Research Agency) through the María de Maeztu Seal of Excellence to IRI (MDM-2016-0656). The authors also thank Aigües de Barcelona for their financial and technical support. Considering the fact that data, models and tools used in this research are confidential or commercial, we refer other researchers to contact SUEZ Spain Group (for access to detailed, simplified models; the Closed-loop Simulation Framework software; and the rain data) and Innovyze (for licenses to InfoWorks ICM). Also appreciate for the support from NWO (Netherlands Organisation for Scientific Research) Sectorplan for Beta and Technology Programme in Wageningen University
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Distributed data-driven UAV formation control via evolutionary games: Experimental results

  • Barreiro-Gómez, Julian
  • Mas, Ignacio
  • Giribet, Juan Ignacio
  • Moreno, Patricio
  • Ocampo-Martínez, Carlos
  • Sánchez-Peña, Ricardo S.
  • Quijano, Nicanor
This work proposes a novel data-driven distributed formation-control approach based on multi-population evolutionary games, which is structured in a leader-follower scheme. The methodology considers a time-varying communication graph that describes how the multiple agents share information to each other. We present stability guarantees for configurations given by time-varying interaction networks, making the proposed method suitable for real-world problems where communication constraints change along the time. Additionally, the proposed formation controller allows for an agent to leave or enter the group without the need to modify the behaviors of other agents in the group. This game-theoretical approach is evaluated through numerical simulations and real outdoors experimental results using a fleet of aerial autonomous vehicles, showing the control performance., J. Barreiro-Gomez acknowledges support from U.S. Air Force Office of Scientific Research under grant number FA9550-17-1-0259, and from the Research Center on Stability, Instability and Turbulence (SITE). This material is based upon work supported by Tamkeen under the NYU Abu Dhabi Research Institute grant CG002. I. Mas, J. I. Giribet, P. Moreno and R. Sanchez-Peña acknowledge the support of the W911NF-14-1-0008 grant from the USAITC (RDECOM, USA), and PICT 2014-2055 and PICT 2016-2016 from FONCYT (Argentina). C. Ocampo-Martinez acknowledges the project DEOCS Ref. DPI2016-76493-C3-3-R from the Spanish Ministry of Science and Education for partially supporting this research. N. Quijano thanks support from Air Force Office of Scientific Research. This material is based upon work supported by the Air Force Office of Scientific Research under award number FA9550-19-1-0014.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Leak Localization Method for Water-Distribution Networks Using a Data-Driven Model and Dempster-Shafer Reasoning

  • Soldevila, Adrià
  • Blesa, Joaquim
  • Jensen, Tom Nørgaard
  • Tornil-Sin, Sebastian
  • Fernández Cantí, Rosa M.
  • Puig, Vicenç
This article presents a new data-driven method for leak localization in water-distribution networks (WDNs). The method uses the information provided by a set of pressure sensors installed in some internal network nodes in addition to flow and pressure measurements from inlet nodes. Pressure measurements are recorded under leak-free network operation, and a WDN data-driven model of the pressure at each sensed node is adjusted. The pressure estimation from this model is complemented by a Kriging spatial interpolation technique to estimate the pressure in the nodes that are not sensed, leading to a pressure reference map. Leak localization is based on the comparison of this reference pressure map with the current pressure map that is obtained by applying Kriging directly to the pressure measurements provided by sensors. The key element in this comparison is the use of the Dempster-Shafer theory for reasoning under uncertainty. The successful application of the proposed methodology to two real-data case studies is presented., This work has been funded by the Ministerio de Econom´ıa, Industria y Competitividad (MEICOMP) of the Spanish Government through the project DEOCS (ref. DPI2016-76493) and by the Catalan Agency for Management of University and Research Grants (AGAUR), the European Social Fund (ESF) and the Secretary of University and Research of the Department of Companies and Knowledge of the Government of Catalonia through the grant FI-DGR 2015 (ref. 2015 FI B 00591). J. Blesa acknowledges the support from the Serra Hunter program. The third author would like to acknowledge ´ the grant from the Innovation Fund Denmark (IFD) under File No. 6155-00002B.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Predictive management approach for the coordination of wind and water-based power supplies

  • Levieux, Luis Ignacio
  • Ocampo-Martínez, Carlos
  • Inthamoussou, Fernando A.
  • Battista, Hernán de
This paper addresses the coordinated operation between wind farms and reservoir hydropower plants in networks with weak transmission capacity. The joint operation of the energy sources is captured by a Virtual Power Plant (VPP) representation. With the aim of maximising renewable energy penetration while ensuring a suitable VPP integration, a supervisory controller for the energy dispatch layer is proposed. To deal with the variable nature of both resources, the controller has been designed into a model predictive control framework including mixed-integer quadratic programming (given the hybrid considered model) for solving the related optimisation problem, and complementary techniques as constraints softening and time-varying weighting. The results indicate that the predictive control approach achieves a better Independent System Operator (ISO) reference tracking that, together with reservoir management, are the most important factors to ensure a suitable VPP incorporation to the main grid. As a case study, a sub-network of the Argentinian power system is tackled. The controller performance is quantitatively and qualitatively assessed under uncertain conditions and compared with other approaches over a nine-year period. By means of the proposed power management policy, the ISO's effort to balance the sub-network is reduced 56% with regard to other approaches without any water spillage., This work was supported by Universidad Nacional de La Plata (UNLP) (Proyecto I216), CONICET (PIP 112-201501-00837) and MinCyT (PICT 2015–3586). The work of C. Ocampo-Martinez has been partially supported by the project DEOCS (Ref. DPI2016-76493-C3-3-R) from the Spanish Ministry of Economy and Competitiveness.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Economic model predictive control of nonlinear systems using a linear parameter varying approach

  • Karimi Pour, Fatemeh
  • Puig, Vicenç
  • Ocampo-Martínez, Carlos
This article proposes an economic model predictive control (EMPC) approach for linear parameter varying (LPV) systems. An efficient implementation of the associated MPC optimization problem is introduced based on transforming the LPV model into a linear time-varying one by using an estimation of the scheduling variables along the prediction horizon. This estimation is based on the optimal states/inputs determined from the solution of the previous optimization problem while running the receding horizon strategy. Using this approach, the solution of the proposed LPV-based EMPC scheme would be possible by solving a series of quadratic programming problems at each time instant. This approach allows reducing the computational burden compared with the solution of a nonlinear optimization problem that would result naturally from the LPV-based formulation. The stability of the proposed approach is guaranteed by forcing the terminal state to converge towards the optimal equilibrium/working point of the system. Moreover, the terminal constraint is relaxed by using a constraint set around the terminal state instead of a constraint value and adding a penalty on the terminal state into the cost function. Besides, strict dissipativity is established as a sufficient condition to prove stability. Finally, the effectiveness of the LPV-based EMPC strategy is shown by controlling a small-scale pasteurization system in simulation. The comparison between the proposed control approach and standard MPC approaches is performed. Results show the advantages of the proposed LPV-based EMPC controller in terms of economic cost minimization., This work has been partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the projects DEOCS (ref. MINECO DPI2016-76493) and SCAV (ref. MINECO DPI2017-88403-R).This work has also been partially funded by AGAUR of Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (2017 SGR 482).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Leak detection and localization in water distribution networks by combining expert knowledge and data-driven models

  • Soldevila, Adrià
  • Boracchi, Giacomo
  • Roveri, Manuel
  • Tornil-Sin, Sebastian
  • Puig, Vicenç
Leaks represent one of the most relevant faults in water distribution networks (WDN), resulting in severe losses. Despite the growing research interest in critical infrastructure monitoring, most of the solutions present in the literature cannot completely address the specific challenges characterizing WDNs, such as the low spatial resolution of measurements (flow and/or pressure recordings) and the scarcity of annotated data. We present a novel integrated solution that addresses these challenges and successfully detects and localizes leaks in WDNs. In particular, we detect leaks by a sequential monitoring algorithm that analyzes the inlet flow, and then we validate each detection by an ad hoc statistical test. We address leak localization as a classification problem, which we can simplify by a customized clustering scheme that gathers locations of the WDN where, due to the low number of sensors, it is not possible to accurately locate leaks. A relevant advantage of the proposed solution is that it exposes interpretable tuning parameters and can integrate knowledge from domain experts to cope with scarcity of annotated data. Experiments, performed on a real dataset of the Barcelona WDN with both real and simulated leaks, show that the proposed solution can improve the leak detection and localization performance with respect to methods proposed in the literature., This work has been funded by the Spanish Ministry of Economy and Competitiveness (MEINCOP), the Spanish State Research Agency (AEI) and by European Regional Development Fund (ERDF) through project DEOCS (ref. DPI2016-76493-C3-3-R) and through grant IJCI-2014-2081, by the European Commission through contract EFFINET (ref. FP7-ICT2011-8-318556), and by the Catalan Agency for Management of University and Research Grants (AGAUR), the European Social Fund (ESF) and the Secretary of University and Research of the Department of Companies and Knowledge of the Government of Catalonia through the grant FI-DGR 2015 (ref. 2015 FI_B 00591).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Leak Localization in Water Distribution Networks Using Data-Driven and Model-Based Approaches

  • Romero Ben, Luis
  • Alves, Débora
  • Blesa, Joaquim
  • Cembrano, Gabriela
  • Puig, Vicenç
  • Duviella, Eric
The detection and localization of leaks in water distribution networks (WDNs) is one of the major concerns of water utilities, due to the necessity of an efficient operation that satisfies the worldwide growing demand for water. There exists a wide range of methods, from equipment-based techniques that rely only on hardware devices to software-based methods that exploit models and algorithms as well. Model-based approaches provide an effective performance but rely on the availability of an hydraulic model of the WDN, while data-driven techniques only require measurements from the network operation but may produce less accurate results. This paper proposes two methodologies: a model-based approach that uses the hydraulic model of the network, as well as pressure and demand information; and a fully data-driven method based on graph interpolation and a new candidate selection criteria. Their complementary application was successfully applied to the Battle of the Leakage Detection and Isolation Methods (BattLeDIM) 2020 challenge, and the achieved results are presented in this paper to demonstrate the suitability of the methods., The authors want to thank the Spanish national project DEOCS (DPI2016-76493-C3-3-R) and L-BEST (Ref. PID2020-115905RB-C21), as well as the Spanish State Research Agency through the María de Maeztu Seal of Excellence to IRI (MDM-2016-0656).
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Modelling daily water consumption through potential curves. Disaggregating apparent and real losses

  • Grau Torrent, Sergi
  • Pérez Magrané, Ramon
This is an Accepted Manuscript of an article published by Taylor & Francis in Urban Water Journal on 18 May 2020, available online: http://www.tandfonline.com/10.1080/1573062X.2020.1764594, This paper presents a model, based on potential curves, that describes the behaviour of the inverse of the daily cumulated frequency of the flows provided to a District Metered Area (DMA). The model has two terms, the first corresponds to the variable consumption due to the aggregation of demand patterns of consumers. The evolution of this term presents periodic behaviours with annual and weekly frequency. An extreme drought episode that affected Catalunya, reduced this parameter 19%. A second term presents exponential behaviour in its evolution and includes the real leakage. The leakage disaggregation together with the billing information allows the estimation of the apparent loses, 14.89% in the case study. The difficulty of estimating the parameters in a potential model, a complex problem of optimization, is simplified by applying mathematical moments. Hence, daily parameters become a linear relation of the daily moments that allows their algebraic operation., This work has been partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the projects SCAV (ref. MINECO DPI2017-88403-R) and DEOCS (ref. MINECO DPI2016-76493) and AGAUR ACCIO RIS3CAT UTILITIES 4.0 – P4 MODEM. Data have been gently provided by the company Aigües de Manresa., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Data-driven decentralized algorithm for wind farm control with population-games assistance

  • Barreiro Gómez, Julián
  • Ocampo-Martínez, Carlos
  • Bianchi, Fernando Daniel
  • Quijano Silva, Nicanor
In wind farms, the interaction between turbines that operate close by experience some problems in terms of their power generation. Wakes caused by upstream turbines are mainly responsible of these interactions, and the phenomena involved in this case is complex especially when the number of turbines is high. In order to deal with these issues, there is a need to develop control strategies that maximize the energy captured from a wind farm. In this work, an algorithm that uses multiple estimated gradients based on measurements that are classified by using a simple distributed population-games-based algorithm is proposed. The update in the decision variables is computed by making a superposition of the estimated gradients together with the classification of the measurements. In order to maximize the energy captured and maintain the individual power generation, several constraints are considered in the proposed algorithm. Basically, the proposed control scheme reduces the communications needed, which increases the reliability of the wind farm operation. The control scheme is validated in simulation in a benchmark corresponding to the Horns Rev wind farm., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

An LMI–based heuristic algorithm for vertex reduction in LPV systems

  • Sanjuan Gómez, Adrián
  • Rotondo, Damiano
  • Nejjari Akhi-Elarab, Fatiha
  • Sarrate Estruch, Ramon
The linear parameter varying (LPV) approach has proved to be suitable for controlling many non-linear systems. However, for those which are highly non-linear and complex, the number of scheduling variables increases rapidly. This fact makes the LPV controller implementation not feasible for many real systems due to memory constraints and computational burden. This paper considers the problem of reducing the total number of LPV controller gains by determining a heuristic methodology that combines two vertices of a polytopic LPV model such that the same gain can be used in both vertices. The proposed algorithm, based on the use of the Gershgorin circles, provides a combinability ranking for the different vertex pairs, which helps in solving the reduction problem in fewer attempts. Simulation examples are provided in order to illustrate the main characteristics of the proposed approach., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Predictive management approach for the coordination of wind and water-based power supplies

  • Levieux, Luis Ignacio
  • Ocampo-Martínez, Carlos
  • Inthamoussou, Fernando A.
  • De Battista, Hernán
This paper addresses the coordinated operation between wind farms and reservoir hydropower plants in networks with weak transmission capacity. The joint operation of the energy sources is captured by a Virtual Power Plant (VPP) representation. With the aim of maximising renewable energy penetration while ensuring a suitable VPP integration, a supervisory controller for the energy dispatch layer is proposed. To deal with the variable nature of both resources, the controller has been designed into a model predictive control framework including mixed-integer quadratic programming (given the hybrid considered model) for solving the related optimisation problem, and complementary techniques as constraints softening and time-varying weighting. The results indicate that the predictive control approach achieves a better Independent System Operator (ISO) reference tracking that, together with reservoir management, are the most important factors to ensure a suitable VPP incorporation to the main grid. As a case study, a sub-network of the Argentinian power system is tackled. The controller performance is quantitatively and qualitatively assessed under uncertain conditions and compared with other approaches over a nine-year period. By means of the proposed power management policy, the ISO’s effort to balance the sub-network is reduced 56% with regard to other approaches without any water spillage., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Fault detection for uncertain LPV systems using probabilistic set-membership parity relation

  • Wan, Yiming
  • Puig Cayuela, Vicenç
  • Ocampo-Martínez, Carlos
  • Wang, Ye
  • Harinath, Eranda
  • Braatz, Richard D.
This paper considers fault detection of uncertain linear parameter varying systems that have polynomial dependence on parametric uncertainties. A conventional set-membership (SM) approach is able to ensure zero false alarm rate (FAR) by using conservative threshold sets, but usually results in a high missed detection rate (MDR) due to equally treating all uncertainty realizations without distinguishing between high and low probability of occurrence. To address this limitation, a probabilistic SM parity relation approach is proposed to exploit probabilistic information on the parametric uncertainties, which results in a reduced MDR by admitting an acceptable FAR. The parity relation is first polynomially parameterized with respect to uncertain parameters. Then, Gaussian mixtures are adopted to efficiently compute uncertainty propagation from stochastic uncertainties to the residual distribution. To achieve an acceptable FAR, a non-convex confidence set of residuals – represented by a union of ellipsoids – is determined for the consistency test. The effectiveness of the proposed approach is illustrated using a continuous stirred tank reactor example including performance comparisons with a deterministic zonotope-based method., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A game theoretical randomized method for large-scale systems partitioning

  • Muros Ponce, Francisco
  • Maestre Torreblanca, José María
  • Ocampo-Martínez, Carlos
  • Algaba Durán, Encarnación
  • Fernández Camacho, Eduardo
© 20xx IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., In this paper, a game theory-based partitioning algorithm for large-scale systems (LSS) is proposed. More specifically, a game over nodes is introduced in a model predictive control framework. The Shapley value of this game is used to rank the communication links of the control network based on their impact on the overall system performance. A randomized method to estimate the Shapley value of each node and also an efficient redistribution of the resulting value to the links involved are considered to relieve the combinatorial explosion issues related to LSS. Once the partitioning solution is obtained, a sensitivity analysis is proposed to give a measure of its performance. Likewise, a greedy fine tuning procedure is considered to increase the optimality of the partitioning results. The full Barcelona drinking water network (DWN) is analyzed as a real LSS case study showing the effectiveness of the proposed approach in comparison with other partitioning schemes available in the literature., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Robust economic model predictive control based on a periodicity constraint

  • Wang, Ye
  • Muñoz De la Peña, David
  • Puig Cayuela, Vicenç
  • Cembrano Gennari, Gabriela
This paper proposes robust economic model predictive control based on a periodicity constraint for linear systems subject to unknown-but-bounded additive disturbances. In this economic MPC design, a periodic steady-state trajectory is not required and thus assumed unknown, which precludes the use of enforcing terminal state constraints as in other standard economic formulations. Instead, based on the desired periodicity of system operation, we optimize the economic performance over a set of periodic trajectories that include the current state. To achieve robust constraint satisfaction, we use a tube-based technique in the economic MPC formulation. The mismatches between the nominal model and the closed-loop system with perturbations are limited using a local control law. With the proposed robust tube-based strategy, recursive feasibility is guaranteed. Moreover, under a convexity assumption, the closed-loop convergence of the closed-loop system is analyzed, and an optimality certificate is provided to check if the closed-loop trajectory reaches a neighborhood of the optimal nominal periodic steady trajectory using Karush-Kuhn-Tucker optimality conditions. Finally, through numerical examples, we show the effectiveness of the proposed approach., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A virtual actuator approach for the secure control of networked LPV systems under pulse-width modulated DoS attacks

  • Rotondo, Damiano
  • Sánchez, Helem Sabina
  • Puig Cayuela, Vicenç
  • Escobet Canal, Teresa
  • Quevedo Casín, Joseba Jokin
In this paper, we formulate and analyze the problem of secure control in the context of networked linear parameter varying (LPV) systems. We consider an energy-constrained, pulse-width modulated (PWM) jammer, which corrupts the control communication channel by performing a denial-of-service (DoS) attack. In particular, the malicious attacker is able to erase the data sent to one or more actuators. In order to achieve secure control, we propose a virtual actuator technique under the assumption that the behavior of the attacker has been identified. The main advantage brought by this technique is that the existing components in the control system can be maintained without need of retuning them, since the virtual actuator will perform a reconfiguration of the plant, hiding the attack from the controller point of view. Using Lyapunov-based results that take into account the possible behavior of the attacker, design conditions for calculating the virtual actuators gains are obtained. A numerical example is used to illustrate the proposed secure control strategy., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A review of convex approaches for control, observation and safety of linear parameter varying and Takagi-Sugeno systems

  • López Estrada, Francisco Ronay
  • Rotondo, Damiano
  • Valencia Palomo, Guillermo
This paper provides a review about the concept of convex systems based on Takagi-Sugeno, linear parameter varying (LPV) and quasi-LPV modeling. These paradigms are capable of hiding the nonlinearities by means of an equivalent description which uses a set of linear models interpolated by appropriately defined weighing functions. Convex systems have become very popular since they allow applying extended linear techniques based on linear matrix inequalities (LMIs) to complex nonlinear systems. This survey aims at providing the reader with a significant overview of the existing LMI-based techniques for convex systems in the fields of control, observation and safety. Firstly, a detailed review of stability, feedback, tracking and model predictive control (MPC) convex controllers is considered. Secondly, the problem of state estimation is addressed through the design of proportional, proportional-integral, unknown input and descriptor observers. Finally, safety of convex systems is discussed by describing popular techniques for fault diagnosis and fault tolerant control (FTC)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Detection of replay attacks in cyber-physical systems using a frequency-based signature

  • Sánchez Corrales, Helem Sabina
  • Rotondo, Damiano
  • Escobet Canal, Teresa
  • Puig Cayuela, Vicenç
  • Saludes Closa, Jordi
  • Quevedo Casín, Joseba Jokin
This paper proposes a frequency-based approach for the detection of replay attacks affecting cyber-physical systems (CPS). In particular, the method employs a sinusoidal signal with a time-varying frequency (authentication signal) into the closed-loop system and checks whether the time profile of the frequency components in the output signal are compatible with the authentication signal or not. In order to carry out this target, the couplings between inputs and outputs are eliminated using a dynamic decoupling technique based on vector fitting. In this way, a signature introduced on a specific input channel will affect only the output that is selected to be associated with that input, which is a property that can be exploited to determine which channels are being affected. A bank of band-pass filters is used to generate signals whose energies can be compared to reconstruct an estimation of the time-varying frequency profile. By matching the known frequency profile with its estimation, the detector can provide the information about whether a replay attack is being carried out or not. The design of the signal generator and the detector are thoroughly discussed, and an example based on a quadruple-tank process is used to show the application and effectiveness of the proposed method., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Optimal state observation using quadratic boundedness: application to UAV disturbance estimation

  • Cayero Becerra, Julián Francisco
  • Rotondo, Damiano
  • Morcego Seix, Bernardo
  • Puig Cayuela, Vicenç
This paper presents the design of a state observer which guarantees quadratic boundedness of the estimation error. By using quadratic Lyapunov stability analysis, the convergence rate and the ultimate (steady-state) error bounding ellipsoid are identified as the parameters that define the behaviour of the estimation. Then, it is shown that these objectives can be merged in a scalarised objective function with one design parameter, making the design problem convex. In the second part of the article, a UAV model is presented which can be made linear by considering a particular state and frame of reference. The UAV model is extended to incorporate a disturbance model of variable size. The joint model matches the structure required to derive an observer, following the lines of the proposed design approach. An observer for disturbances acting on the UAV is derived and the analysis of the performances with respect to the design parameters is presented. The effectiveness and main characteristics of the proposed approach are shown using simulation results., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Economic health-aware LPV-MPC based on system reliability assessment for water transport network

  • Karimi Pour, Fatemeh
  • Puig Cayuela, Vicenç
  • Cembrano Gennari, Gabriela
This paper proposes a health-aware control approach for drinking water transport networks. This approach is based on an economic model predictive control (MPC) that considers an additional goal with the aim of extending the components and system reliability. The components and system reliability are incorporated into the MPC model using a Linear Parameter Varying (LPV) modeling approach. The MPC controller uses additionally an economic objective function that determines the optimal filling/emptying sequence of the tanks considering that electricity price varies between day and night and that the demand also follows a 24-h repetitive pattern. The proposed LPV-MPC control approach allows considering the model nonlinearities by embedding them in the parameters. The values of these varying parameters are updated at each iteration taking into account the new values of the scheduling variables. In this way, the optimization problem associated with the MPC problem is solved by means of Quadratic Programming (QP) to avoid the use of nonlinear programming. This iterative approach reduces the computational load compared to the solution of a nonlinear optimization problem. A case study based on the Barcelona water transport network is used for assessing the proposed approach performance., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Leak localization in water distribution networks using pressure and data-driven classifier approach

  • Sun, Congcong
  • Parellada Calderer, Benjamí
  • Puig Cayuela, Vicenç
  • Cembrano Gennari, Gabriela
Leaks in water distribution networks (WDNs) are one of the main reasons for water loss during fluid transportation. Considering the worldwide problem of water scarcity, added to the challenges that a growing population brings, minimizing water losses through leak detection and localization, timely and efficiently using advanced techniques is an urgent humanitarian need. There are numerous methods being used to localize water leaks in WDNs through constructing hydraulic models or analyzing flow/pressure deviations between the observed data and the estimated values. However, from the application perspective, it is very practical to implement an approach which does not rely too much on measurements and complex models with reasonable computation demand. Under this context, this paper presents a novel method for leak localization which uses a data-driven approach based on limit pressure measurements in WDNs with two stages included: (1) Two different machine learning classifiers based on linear discriminant analysis (LDA) and neural networks (NNET) are developed to determine the probabilities of each node having a leak inside a WDN; (2) Bayesian temporal reasoning is applied afterwards to rescale the probabilities of each possible leak location at each time step after a leak is detected, with the aim of improving the localization accuracy. As an initial illustration, the hypothetical benchmark Hanoi district metered area (DMA) is used as the case study to test the performance of the proposed approach. Using the fitting accuracy and average topological distance (ATD) as performance indicators, the preliminary results reaches more than 80% accuracy in the best cases., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Clustering-learning approach to the localization of leaks in water distribution networks

  • Romero Ben, Luis
  • Blesa Izquierdo, Joaquim
  • Puig Cayuela, Vicenç
  • Cembrano Gennari, Gabriela
Leak detection and localization in water distribution networks (WDNs) is of great significance for water utilities. This paper proposes a leak localization method that requires hydraulic measurements and structural information of the network. It is composed by an image encoding procedure and a recursive clustering/learning approach. Image encoding is carried out using Gramian Angular Field (GAF) on pressure measurements to obtain images for the learning phase (for all possible leak scenarios). The recursive clustering/learning approach divides the considered region of the network into two sets of nodes using Graph Agglomerative Clustering (GAC), and trains a deep neural network (DNN) to discern the location of each leak between the two possible clusters, using each one of them as inputs to future iterations of the process. The achieved set of DNNs is hierarchically organized to generate a classification tree. Actual measurements from a leak event occurred in a real network are used to assess the approach, comparing its performance with another state-of-the-art technique, and demonstrating the capability of the method to regulate the area of localization depending on the depth of the route through the tree., The authors want to thank the Spanish national project “DEOCS (DPI2016-76493-C3-3-R)” project (which is finished nowadays) by its continuation: “L-BEST Project (PID2020-115905RB-C21) funded by MCIN/ AEI /10.13039/501100011033” and the Spanish State Research Agency through the María de Maeztu Seal of Excellence to IRI (MDM-2016-0656). Joaquim Blesa acknowledges the support from the Serra Húnter program, Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Robust fault detection and isolation based on zonotopic unknown input observers for discrete-time descriptor systems

  • Wang, Ye
  • Puig Cayuela, Vicenç
  • Xu, Feng
  • Cembrano Gennari, Gabriela
In this paper, we propose a robust fault detection and isolation (FDI) strategy based on zonotopic unknown input observers (UIOs) for discrete-time descriptor linear time-varying (LTV) systems subject to uncertainties and additive actuator faults. System uncertainties including state disturbances and measurement noise are unknown but bounded by predefined zonotopes. The uncertain state estimations and constructed residuals for robust FDI are propagated in a sequence of zonotopes. Based on a defined performance criterion, the fault detection (FD) observer gain is designed to be robust against uncertainties and meanwhile sensitive to faults. The explicit computational method for the FD observer gain is derived. In addition to include fault isolation, a bank of zonotopic UIOs are employed. Finally, we apply the proposed method into two case studies to show its effectiveness., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

On robust interval observer design for uncertain systems subject to both time-invariant and time-varying uncertainties

  • Pourasgharlafmejani, Masoud
  • Puig Cayuela, Vicenç
  • Ocampo-Martínez, Carlos
This paper proposes the design of an interval observer-based approach for linear dynamic systems aected by both time-invariant and time-varying uncertainties. First, dierent interval observer schemes are compared and analyzed when dealing with the dierent type of uncertainties. Then, an integrated interval observer is proposed in order to overcome the drawbacks of using the set-based approach, i.e., the non-preservation of the parameter uncertainty time dependency and the wrapping effect. Furthermore, H 8 performance is considered in order to compute the observer gain by using an LMI technique. Finally, a numerical example and a real case study based on a two-tank system are employed for both illustrating and analyzing the effectiveness of the proposed approach., This work has been partially funded by the Spanish Government (MINECO) through the project DEOCS (ref. DPI2016-76493-C3-3-R), by MINECO and FEDER through the project SCAV (ref. MINECO DPI2017-88403-R) and by Agència de Gestió d'Ajuts Universitaris i de Recerca. Furthermore, the authors thank Brais Gonzàlez García for his contribution in designing the real experiments., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Bibliographical review on cyber attacks from a control oriented perspective

  • Sánchez Corrales, Helem Sabina
  • Rotondo, Damiano
  • Escobet Canal, Teresa
  • Puig Cayuela, Vicenç
  • Quevedo Casín, Joseba Jokin
This paper presents a bibliographical review of definitions, classifications and applications concerning cyber attacks in networked control systems (NCSs) and cyber-physical systems (CPSs). This review tackles the topic from a control-oriented perspective, which is complementary to information or communication ones. After motivating the importance of developing new methods for attack detection and secure control, this review presents security objectives, attack modeling, and a characterization of considered attacks and threats presenting the detection mechanisms and remedial actions. In order to show the properties of each attack, as well as to provide some deeper insight into possible defense mechanisms, examples available in the literature are discussed. Finally, open research issues and paths are presented., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Time-varying partitioning for predictive control design: density-games approach

  • Barreiro Gómez, Julián
  • Ocampo-Martínez, Carlos
  • Quijano Silva, Nicanor
The design of distributed optimization-based controllers for large-scale systems (LSSs) implies every time new challenges. The fact that LSSs are generally located throughout large geographical areas makes dicult the recollection of measurements and their transmission. In this regard, the communication network that is required for a centralized control approach might have high associated economic costs. Furthermore, the computation of a large amount of data implies a high computational burden to manage, process and use them in order to make decisions over the system operation. A plausible solution to mitigate the aforementioned issues associated with the control of LSSs consists in dividing this type of systems into smaller sub-systems able to be handled by independent local controllers. This paper studies two fundamental components of the design of distributed optimization-based controllers for LSSs, i.e., the system partitioning and distributed optimization algorithms. The design of distributed model predictive control (DMPC) strategies with a system partitioning and by using density-dependent population games (DDPG) is presented., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Set-invariance characterizations of discrete-time descriptor systems with application to active mode detection

  • Wang, Ye
  • Olaru, Sorin
  • Valmorbida, Giorgio
  • Puig Cayuela, Vicenç
  • Cembrano Gennari, Gabriela
© 2019. Elsevier, In this paper, we study robust invariant set characterizations of discrete-time descriptor systems and propose an active mode detection mechanism for discrete-time descriptor systems considering multiple modes of operation. The considered class of descriptor systems assumes regularity, stability and is affected by unknown-but-bounded disturbances. As a first theoretical result, we establish a general framework for robust invariant sets for discrete-time descriptor systems in both causal and non-causal cases. Particular transformations are subsequently proposed for handling causal and non-causal descriptor systems and will be used to characterize the effects of disturbances. Based on these set-theoretic notions and a designed input signal for active set separations, we propose an active mode detection mechanism by exploiting the strong invariance properties., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Reachability and stabilization of scheduled steady-states for LPV single-input systems

  • Corona, Dario
  • Cristofaro, Andrea
  • Rotondo, Damiano
The aim of this work is characterizing the class of LPV systems that admit steady-state trajectories depending exclusively on the scheduling parameter. In particular, it will be shown that only certain parameter dependent steady-state profiles are admissible and can be reached by means of a suitable control input. Furthermore, the asymptotic stability and the stabilization of such steady-states is investigated using Lyapunov-based techniques. Extensive numerical simulations illustrate and corroborate the theoretical results., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Integrated pollution-based real-time control of sanitation systems

  • Sun, Congcong
  • Romero Ben, Luis
  • Joseph Duran, Bernat
  • Meseguer, Jordi
  • Muñoz, Eduardo
  • Guasch Palma, Ramon
  • Martínez Puentes, Montse
  • Puig Cayuela, Vicenç
  • Cembrano Gennari, Gabriela
© 2020. Elsevier, An integrated pollution-based real-time control (RTC) approach is proposed for a sewer network (SN) integrated with wastewater treatment plants (WWTPs) in a sanitation system (SS) to mitigate the impacts of pollution from combined sewer overflows (CSOs) on ecosystems. To obtain the optimal solution for the SS while considering both quantity and quality dynamics for multiple objectives, model predictive control (MPC) is selected as the optimal control method. To integrate SN and WWTP management, a feedback coordination algorithm is developed. A closed-loop virtual-reality simulator is used to assess the results of the optimal management approach achieved by applying MPC. The Badalona SS (Spain) provides a pilot case study to assess the efficacy and applicability of the proposed approach. A comparison with local rule-based and volume-based control strategies currently in use indicates that the proposed integrated pollution-based RTC approach can reduce the pollutant loads released to the receiving environment., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Economic model predictive control of nonlinear systems using a linear parameter varying approach

  • Karimi Pour, Fatemeh
  • Puig Cayuela, Vicenç
  • Ocampo-Martínez, Carlos
This paper proposes an Economic Model Predictive Control (EMPC) approach for Linear Parameter Varying (LPV) systems. An efficient implementation of the associated MPC optimization problem is introduced based on transforming the LPV model into a linear time-varying one by using an estimation of the scheduling variables along the prediction horizon. This estimation is based on the optimal states/inputs determined from the solution of the previous optimization problem while running the receding horizon strategy. Using this approach, the solution of the proposed LPVbased EMPC scheme would be possible by solving a series of quadratic programming problems at each time instant. This approach allows reducing the computational burden compared to the solution of a nonlinear optimization problem that would result naturally from the LPV-based formulation. The stability of the proposed approach is guaranteed by forcing the terminal state to converge towards the optimal equilibrium/working point of the system. Moreover, the terminal constraint is relaxed by using a constraint set around the terminal state instead of a constraint value and adding a penalty on the terminal state into the cost function. Besides, strict dissipativity is established as a sufficient condition to prove stability. Finally, the effectiveness of the LPV-based EMPC strategy is shown by controlling a small-scale pasteurization system in simulation. The comparison between the proposed control approach and standard MPC approaches is performed. Results showthe advantages of the proposed LPV-based EMPC controller in terms of economic cost minimization., This work has been partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the projects DEOCS (ref. MINECO DPI2016-76493) and SCAV (ref. MINECO DPI2017-88403-R).This work has also been partially funded by AGAUR of Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (2017 SGR 482), Peer Reviewed, Postprint (published version)