Pasar al contenido principal

MODELIZACION MULTIESCALA Y SIMULACION NUMERICA DIRECTA DE FLUJOS MULTIFASICOS GAS LIQUIDO EN BURBUJAS, PELICULAS Y ESPRAYS.

ENE2015-70672-P

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D (Excelencia / Generación de Conocimiento)
Año convocatoria 2015
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario UNIVERSITAT POLITECNICA DE CATALUNYA
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

On the implementation of flux limiters in algebraic frameworks

  • Valle Marchante, Nicolás|||0000-0003-2140-041X
  • Álvarez Farré, Xavier|||0000-0002-1684-7658
  • Gorobets, Andrei
  • Castro González, Jesús|||0000-0002-8943-2402
  • Oliva Llena, Asensio|||0000-0002-2805-4794
  • Trias Miquel, Francesc Xavier|||0000-0002-5966-0703
The use of flux limiters is widespread within the scientific computing community to capture shock dis- continuities and are of paramount importance for the temporal integration of high-speed aerodynamics, multiphase flows and hyperbolic equations in general. Meanwhile, the breakthrough of new computing architectures and the hybridization of supercomputer systems pose a huge portability challenge, particularly for legacy codes, since the computing subroutines that form the algorithms, the so-called kernels, must be adapted to various complex parallel program- ming paradigms. From this perspective, the development of innovative implementations relying on a minimalist set of kernels simplifies the deployment of scientific computing software on state-of-the-art supercomputers, while it requires the reformulation of algorithms, such as the aforementioned flux lim- iters. Equipped with basic algebraic topology and graph theory underlying the classical mesh concept, a new flux limiter formulation is presented based on the adoption of algebraic data structures and kernels. As a result, traditional flux limiters are cast into a stream of only two types of computing kernels: sparse matrix-vector multiplication and generalized pointwise binary operators. The newly proposed formulation eases the deployment of such a numerical technique in massively parallel, potentially hybrid, computing systems and is demonstrated for a canonical advection problem., The work of N. V. and X. Á. F. has been supported by the Government of Catalonia, FI AGAUR predoctoral grants 2019FI_B2_ 000104 and 2019FI_B2_00076. N. V., X. Á. F., J. C., A. O. and F. X. T. have been funded by the Spanish Research Agency, ANUMESOL project ENE2017-88697-R. J. C. has also been funded by Spanish Research Agency, GALIFLOW project ENE2015-70662-P. The studies of this work have been carried out using the MareNostrum 4 supercomputer of the Barcelona Supercomput- ing Center, projects IM-2019-3-0026 and IM-2020-1-0006; the TSUBAME3.0 supercomputer of the Global Scientific Information and Computing Center at Tokyo Institute of Technology; the Lomonosov-2 supercomputer of the shared research facilities of HPC computing resources at Lomonosov Moscow State University; the K-60 hybrid cluster of the collective use center of the Keldysh Institute of Applied Mathematics; the JFF cluster of the Heat and Mass Transfer Technological Center at Technical University of Cat- alonia. The authors thankfully acknowledge these institutions for the compute time and technical support., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Numerical study of an impulse wave generated by a sliding mass

  • Schillaci, Eugenio|||0000-0002-6690-6871
  • Favre Samarra, Federico|||0000-0001-7307-6194
  • Antepara Zambrano, Óscar|||0000-0002-4596-0289
  • Balcázar Arciniega, Néstor|||0000-0003-0776-2086
  • Oliva Llena, Asensio|||0000-0002-2805-4794
© 2018 WIT Press, In this work, a numerical framework for the direct numerical simulation of tsunami waves generated by landslide events is proposed. The method, implemented on the TermoFluids numerical platform, adopts a free surface model for the simulation of momentum equations; thus, considering the effect of air on the flow physics negligible. The effect of the solid motion on the flow is taken into account by means of a direct forcing immersed boundary method (IBM). The method is available for 3-D unstructured meshes; however, it can be integrated with an adaptive mesh refinement (AMR) tool to dynamically increase the local definition of the mesh in the vicinity of the interfaces, which separate the phases or in the presence of vortical structures. The method is firstly validated by simulating the entrance of objects into still water surfaces for 2-D and 3-D configurations. Next, the case of tsunami generation from a subaerial landslide is studied and the results are validated by comparison to experimental and numerical measurements. Overall, the model demonstrates its efficiency in the simulation of this type of physics, and a wide versatility in the choice of the domain discretization., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

A low-dissipation convection scheme for the stable discretization of turbulent interfacial flow

  • Schillaci, Eugenio|||0000-0002-6690-6871
  • Jofre Cruanyes, Lluís|||0000-0003-2437-259X
  • Balcázar Arciniega, Néstor|||0000-0003-0776-2086
  • Antepara Zambrano, Óscar|||0000-0002-4596-0289
  • Oliva Llena, Asensio|||0000-0002-2805-4794
© 2017. This version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, This paper analyzes a low-dissipation discretization for the resolution of immiscible, incompressible multiphase flow by means of interface-capturing schemes. The discretization is built on a three-dimensional, unstructured finite-volume framework and aims at minimizing the differences in kinetic energy preservation with respect to the continuous governing equations. This property plays a fundamental role in the case of flows presenting significant levels of turbulence. At the same time, the hybrid form of the convective operator proposed in this work incorporates localized low-dispersion characteristics to limit the growth of spurious flow solutions. The low-dissipation discrete framework is presented in detail and, in order to expose the advantages with respect to commonly used methodologies, its conservation properties and accuracy are extensively studied, both theoretically and numerically. Numerical tests are performed by considering a three-dimensional vortex, an exact sinusoidal function, and a spherical drop subjected to surface tension forces in equilibrium and immersed in a swirling velocity field. Finally, the turbulent atomization of a liquid-gas jet is numerically analyzed to further assess the capabilities of the method., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Numerical study of droplet deformation in shear flow using a conservative level-set method

  • Amani, Ahmad|||0000-0001-5197-2879
  • Balcázar Arciniega, Néstor|||0000-0003-0776-2086
  • Castro González, Jesús|||0000-0002-8943-2402
  • Oliva Llena, Asensio|||0000-0002-2805-4794
This paper is concerned with a numerical study on the behavior of a single Newtonian droplet suspended in another Newtonian fluid, all subjected to a simple shear flow. Conservative finite-volume approximation on a collocated three-dimensional grid along with a conservative Level-set method are used to solve the governing equations. Four parameters of capillary number (Ca), Viscosity ratio (), Reynolds number (Re) and walls confinement ratio are used to physically define the problem. The main focus of the current study is to investigate the effect of viscosity on walls critical confinement ratio. In this paper, the phrase critical is used to specify a state of governing parameters in which divides the parameter space into the subcritical and supercritical regions where droplets attain a steady shape or breakup, respectively. To do so, first, we validate the ability of proposed method on capturing the physics of droplet deformation including: steady-state subcritical deformation of non-confined droplet, breakup of supercritical conditioned droplet, steady-state deformation of moderate confined droplet, subcritical oscillation of highly-confined droplet, and the effect of viscosity ratio on deformation of the droplet. The extracted results are compared with available experimental, analytical and numerical data from the literature. Afterward, for a constant capillary number of 0.3 and a low Reynolds number of 1.0, subcritical (steady-state) and supercritical (breakup) deformations of the droplet for a wide range of walls confinement in different viscosity ratios are studied. The results indicate the existence of two steady-state regions in a viscosity ratio-walls confinement ratio graph which are separated by a breakup region., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

On the solution of the problem of a drop falling against a plane by using a level set-moving mesh-immersed boundary method

  • Gutiérrez, Enrique
  • Favre, F.
  • Balcázar Arciniega, Néstor|||0000-0003-0776-2086
  • Rigola Serrano, Joaquim|||0000-0002-6685-3677
© 2018 WIT Press, A coupled Conservative Level Set – Moving Mesh – Immersed Boundary method is formulated and validated against the three-dimensional gravity-driven falling drop problem. First, by employing Conservative Level-Set (CLS) method, the multiphase domain can be successfully handled, while the mass conservation is controlled. Then, by using an Arbitrary Lagrangian-Eulerian formulation (i.e. a moving mesh), the simulation domain can be optimized by reducing the domain size and by allowing an improved mesh, resulting in a computational resources saving. Finally, the use of an Immersed Boundary (IB) method allows to deal with intricate geometries. All these functionalities result in a versatile and robustness method to simulate bubbles/drops problems in complex geometries. The mentioned method was successfully used to thoroughly study the falling of a drop against a plane surface, providing detailed results including velocity evolution, mesh independence study, evolution of the vertical position of the drop, streamlines and vorticity fields, and profiles evolution., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Numerical study of an impulse wave generated by a sliding mass

  • Schillaci, Eugenio
  • Favre Samarra, Federico
  • Antepara Zambrano, Óscar
  • Balcázar Arciniega, Néstor
  • Oliva Llena, Asensio
© 2018 WIT Press, In this work, a numerical framework for the direct numerical simulation of tsunami waves generated by landslide events is proposed. The method, implemented on the TermoFluids numerical platform, adopts a free surface model for the simulation of momentum equations; thus, considering the effect of air on the flow physics negligible. The effect of the solid motion on the flow is taken into account by means of a direct forcing immersed boundary method (IBM). The method is available for 3-D unstructured meshes; however, it can be integrated with an adaptive mesh refinement (AMR) tool to dynamically increase the local definition of the mesh in the vicinity of the interfaces, which separate the phases or in the presence of vortical structures. The method is firstly validated by simulating the entrance of objects into still water surfaces for 2-D and 3-D configurations. Next, the case of tsunami generation from a subaerial landslide is studied and the results are validated by comparison to experimental and numerical measurements. Overall, the model demonstrates its efficiency in the simulation of this type of physics, and a wide versatility in the choice of the domain discretization., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A low-dissipation convection scheme for the stable discretization of turbulent interfacial flow

  • Schillaci, Eugenio
  • Jofre Cruanyes, Lluís
  • Balcázar Arciniega, Néstor
  • Antepara Zambrano, Óscar
  • Oliva Llena, Asensio
© 2017. This version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, This paper analyzes a low-dissipation discretization for the resolution of immiscible, incompressible multiphase flow by means of interface-capturing schemes. The discretization is built on a three-dimensional, unstructured finite-volume framework and aims at minimizing the differences in kinetic energy preservation with respect to the continuous governing equations. This property plays a fundamental role in the case of flows presenting significant levels of turbulence. At the same time, the hybrid form of the convective operator proposed in this work incorporates localized low-dispersion characteristics to limit the growth of spurious flow solutions. The low-dissipation discrete framework is presented in detail and, in order to expose the advantages with respect to commonly used methodologies, its conservation properties and accuracy are extensively studied, both theoretically and numerically. Numerical tests are performed by considering a three-dimensional vortex, an exact sinusoidal function, and a spherical drop subjected to surface tension forces in equilibrium and immersed in a swirling velocity field. Finally, the turbulent atomization of a liquid-gas jet is numerically analyzed to further assess the capabilities of the method., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Numerical study of droplet deformation in shear flow using a conservative level-set method

  • Amani, Ahmad
  • Balcázar Arciniega, Néstor
  • Castro González, Jesús
  • Oliva Llena, Asensio
This paper is concerned with a numerical study on the behavior of a single Newtonian droplet suspended in another Newtonian fluid, all subjected to a simple shear flow. Conservative finite-volume approximation on a collocated three-dimensional grid along with a conservative Level-set method are used to solve the governing equations. Four parameters of capillary number (Ca), Viscosity ratio (), Reynolds number (Re) and walls confinement ratio are used to physically define the problem. The main focus of the current study is to investigate the effect of viscosity on walls critical confinement ratio. In this paper, the phrase critical is used to specify a state of governing parameters in which divides the parameter space into the subcritical and supercritical regions where droplets attain a steady shape or breakup, respectively. To do so, first, we validate the ability of proposed method on capturing the physics of droplet deformation including: steady-state subcritical deformation of non-confined droplet, breakup of supercritical conditioned droplet, steady-state deformation of moderate confined droplet, subcritical oscillation of highly-confined droplet, and the effect of viscosity ratio on deformation of the droplet. The extracted results are compared with available experimental, analytical and numerical data from the literature. Afterward, for a constant capillary number of 0.3 and a low Reynolds number of 1.0, subcritical (steady-state) and supercritical (breakup) deformations of the droplet for a wide range of walls confinement in different viscosity ratios are studied. The results indicate the existence of two steady-state regions in a viscosity ratio-walls confinement ratio graph which are separated by a breakup region., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

On the solution of the problem of a drop falling against a plane by using a level set-moving mesh-immersed boundary method

  • Gutiérrez, Enrique
  • Favre, F.
  • Balcázar Arciniega, Néstor
  • Rigola Serrano, Joaquim
© 2018 WIT Press, A coupled Conservative Level Set – Moving Mesh – Immersed Boundary method is formulated and validated against the three-dimensional gravity-driven falling drop problem. First, by employing Conservative Level-Set (CLS) method, the multiphase domain can be successfully handled, while the mass conservation is controlled. Then, by using an Arbitrary Lagrangian-Eulerian formulation (i.e. a moving mesh), the simulation domain can be optimized by reducing the domain size and by allowing an improved mesh, resulting in a computational resources saving. Finally, the use of an Immersed Boundary (IB) method allows to deal with intricate geometries. All these functionalities result in a versatile and robustness method to simulate bubbles/drops problems in complex geometries. The mentioned method was successfully used to thoroughly study the falling of a drop against a plane surface, providing detailed results including velocity evolution, mesh independence study, evolution of the vertical position of the drop, streamlines and vorticity fields, and profiles evolution., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

On the implementation of flux limiters in algebraic frameworks

  • Valle Marchante, Nicolás
  • Álvarez Farré, Xavier
  • Gorobets, Andrei
  • Castro González, Jesús
  • Oliva Llena, Asensio
  • Trias Miquel, Francesc Xavier
The use of flux limiters is widespread within the scientific computing community to capture shock dis- continuities and are of paramount importance for the temporal integration of high-speed aerodynamics, multiphase flows and hyperbolic equations in general. Meanwhile, the breakthrough of new computing architectures and the hybridization of supercomputer systems pose a huge portability challenge, particularly for legacy codes, since the computing subroutines that form the algorithms, the so-called kernels, must be adapted to various complex parallel program- ming paradigms. From this perspective, the development of innovative implementations relying on a minimalist set of kernels simplifies the deployment of scientific computing software on state-of-the-art supercomputers, while it requires the reformulation of algorithms, such as the aforementioned flux lim- iters. Equipped with basic algebraic topology and graph theory underlying the classical mesh concept, a new flux limiter formulation is presented based on the adoption of algebraic data structures and kernels. As a result, traditional flux limiters are cast into a stream of only two types of computing kernels: sparse matrix-vector multiplication and generalized pointwise binary operators. The newly proposed formulation eases the deployment of such a numerical technique in massively parallel, potentially hybrid, computing systems and is demonstrated for a canonical advection problem., The work of N. V. and X. Á. F. has been supported by the Government of Catalonia, FI AGAUR predoctoral grants 2019FI_B2_ 000104 and 2019FI_B2_00076. N. V., X. Á. F., J. C., A. O. and F. X. T. have been funded by the Spanish Research Agency, ANUMESOL project ENE2017-88697-R. J. C. has also been funded by Spanish Research Agency, GALIFLOW project ENE2015-70662-P. The studies of this work have been carried out using the MareNostrum 4 supercomputer of the Barcelona Supercomput- ing Center, projects IM-2019-3-0026 and IM-2020-1-0006; the TSUBAME3.0 supercomputer of the Global Scientific Information and Computing Center at Tokyo Institute of Technology; the Lomonosov-2 supercomputer of the shared research facilities of HPC computing resources at Lomonosov Moscow State University; the K-60 hybrid cluster of the collective use center of the Keldysh Institute of Applied Mathematics; the JFF cluster of the Heat and Mass Transfer Technological Center at Technical University of Cat- alonia. The authors thankfully acknowledge these institutions for the compute time and technical support., Peer Reviewed, Postprint (published version)