Pasar al contenido principal

DESARROLLO DE MATERIALES AVANZADOS PARA LA GENERACION, ALMACENAMIENTO Y LIBERACION EFICIENTE DE ENERGIA

MAT2013-42092-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2013
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario UNIVERSIDAD DEL PAIS VASCO EUSKAL HERRIKO UNIBERTSITATEA
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of synthesis conditions on electrical and catalytical properties of perovskites with high value of A-site cation size mismatch

  • Vidal, Karmele
  • Larrañaga, Aitor
  • Morán-Ruiz, Aroa
  • Laguna-Bercero, M. A.
  • Arriortua, María Isabel
et al., The perovskite La0.15Sm0.35Sr0.08Ba0.42FeO3-δ has been prepared by the glycine nitrate route, varying the calcination temperature, fuel/oxidizer ratio and cooling rate, in order to study the sample preparation influence on the properties in the context of their application as a electrode material for SOFCs. The obtained materials have been characterized by X-ray diffraction, scanning electron microscopy, electrical and BET surface area measurements, and also the reaction between oxygen and CO, which can occur in SOFCs during the conversion of chemical energy into electrical energy. As overall results, all the samples present a phase segregation showing two perovskites with rhombohedral structure. SEM images show a well-necked morphology of the powders which are composed of nanosized particles and agglomerations of grains. The BET specific surface area of the samples decreases as calcination temperature increases, as well as for the quenched sample. The measured electronic conductivity values (<50 S/cm) are characteristic for samples with these high values of σ(r) (A cation size disorder). The catalytic activity tests for the CO oxidation reaction showed a T50% (“light-off temperature”, defined as the temperature at which 50% conversion of CO is achieved) value about 440°C–450 °C, CO conversion reaching 100% at approximately 600 °C for all the prepared perovskites. Then, for the La0.15Sm0.35Sr0.08Ba0.42FeO3-δ perovskite, CO conversion temperature is lower than usual SOFCs operating temperature. This points out to the technological interest of these materials in the framework of reducing the operating temperature of SOFCs., This research has been funded by the Ministerio de Ciencia e Innovación (CONSOLIDER-INGENIO 2010 CSD2009-00013), Ministerio de Economía y Competitividad (MAT2013-42092-R and MAT2012-30763), the Feder program of the Europen Union and Dpto. Educación, Política Lingüística y Cultura of the Basque Goverment (IT-630-13). The authors thank for technical and human support provided by SGIker of UPV/EHU. K. Vidal thanks UPV/EHU for funding., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Scalable synthetic method for SOFC compounds

  • Wain-Martin, A.
  • Morán-Ruiz, Aroa
  • Vidal, Karmele
  • Larrañaga, Aitor
  • Laguna-Bercero, M. A.
  • Arriortua, María Isabel
Although economically competitive SOFC systems seems to be ready for commercialization, a broad inventory of key starting materials and fabrication processes are needed to enhance systems and reduce costs. These necessities are raised by the demands for large scale SOFC industrial production. Taking into account these reasons, we have synthesized the mean components of a fuel cell, on a large scale, by the glycine nitrate combustion method. The synthesized different components of SOFC have been the interconnector protective coating (MnCo1.9Fe0.1O4), contact layer (LaNi0.6Fe0.4O3), cathode (La0.6Sr0.4FeO3), interlayer (Sm0.2Ce0.8O1.9), electrolyte (ZrO2)0.92(Y2O3)0.08 and anode (Ni0.3O-(ZrO2)0.92(Y2O3)0.08) material, obtaining reproducible pure samples and amounts up to 12 g for each batch, being able to increase easily this amount to lots of hundred of grams. The obtained materials have been characterized by inductively coupled plasma atomic emission spectroscopy (ICP-AES) and X-ray fluorescence (XRF), X-ray diffraction (XRD), dilatometry, scanning electron microscopy (SEM), particle size distribution and conductivity measurements., This research has been funded by the Ministerio de Economía, Industria y Competitividad (MAT2016-76739-R) (AEI/FEDER, UE) and (MAT2015-2015-86078-R) and Dpto. Educación of the Basque Goverment (IT-630-13). The authors thanks the support received by the European Regional Development Fund (ERDF). SGIker of UPV/EHU technical support is gratefully acknowledged. A. Wain-Martin thanks Ministerio de Economía y Competitividad for funding his work (BES-2014-068433)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Mixed Metal-Organic Framework as a Heterogeneous Catalyst

  • Larrea, Edurne S.
  • Fernández de Luis, Roberto
  • Orive, Joseba
  • Iglesias, Marta
  • Arriortua, María I.
The synthesis of a new mixed metal-organic framework (M′MOF) has been accomplished by the metalloligand approach. [NaCu(2,4-HPdc)(2,4-Pdc)] (2,4-H2Pdc = pyridine-2,4-dicarboxylic acid) has been obtained from the hydrothermal reaction of the metalloligand [Cu(2,4-HPdc)2(H2O)2] NaOH, and a transition metal salt. [NaCu(2,4-HPdc)(2,4-Pdc)] is isostructural to [CuMn(2,4-Pdc)2] and crystallizes in the triclinic space group P$\bar {1}$. The 3D structure is built up from [Cu(2,4-HPdc)2(H2O)2] metalloligands and [NaO6] octahedra in a pcu α-Po-like uninodal six-connected net. The compound is stable to 290 °C, and its crystal structure undergoes a 3 % volume expansion between room temperature and thermal decomposition. The unsaturated CuII centers at the surface act as a heterogeneous Lewis acid catalyst for the cyanosilylation of aldehydes and Knoevenagel C-C bond-forming reactions. The catalytic activity has been compared with those of other copper(II) porous metal-organic frameworks such as HKUST-1 and MOF-74., This work was financially supported by the Ministerio de Economía y Competitividad (MEC) (grant numbers MAT2013‐42092‐R, MAT2011‐29020‐C02‐02), the Gobierno Vasco (Basque University Research System Group) (IT‐630‐13), and University of the Basque Country (UPV/EHU) (UFI 11/15).