Pasar al contenido principal

MATERIALES PARA EL FLUJO CIRCULAR DE LA ENERGIA: REDES CRISTALIGRAFICAS BASADAS EN NODOS METALICOS

MAT2016-76739-R

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2016
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DEL PAIS VASCO EUSKAL HERRIKO UNIBERTSITATEA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Combustion synthesis and characterization of Ln1−xMxCr0.9Ni0.1O3 (Ln = La and/or Nd; M = Sr and/or Ca; x ≤ 0.25) perovskites for SOFCs anodes

  • Ortega-San-Martín, L.
  • Morán-Ruiz, Aroa
  • Wain-Martin, A.
  • Vidal, Karmele
  • Larrañaga, Aitor
  • Laguna-Bercero, M. A.
  • Arriortua, María Isabel
A series of chromite perovskites with the general formula Ln1−xMxCr0.9Ni0.1O3 (Ln = La and/or Nd; M = Sr and/or Ca; x ≤ 0.25) has been prepared by three combustion synthesis routes using a different combustible substance each time: glycine, urea and sucrose. In order to isolate the effect of divalent dopant concentration from the A cation steric effects, the whole group has a fixed mean A cation radius, < rA> ≈ 1.22 Å, and cation size disorder, σ2(rA) ≈ 0.0001 Å2, but variable doping x. Their crystal structure, microstructure, electrical properties and expansion coefficients have been investigated on the basis of their possible use as anode materials for intermediate temperature solid oxide fuel cells (SOFC). Cell parameters, grain sizes, expansion coefficients and conductivities all are found to be dependent on x and the combustible substance used. The most interesting relationship is the negative dependence of the conductivity with x under H2 atmosphere: conductivity decreases with doping which is the opposite to the expected behavior for a p-type doped perovskites and has not been reported before., This research has been funded by the Ministerio de Economía y Competitividad (MAT2016-76739-R), the Feder program of the European Union and Dpto. Educación, Política Lingüística y Cultura of the Basque Government (IT-630-13). The authors thank for technical and human support provided by SGIker of UPV/EHU. L.Ortega-San-Martin acknowledges Departamento de Ciencias, PUCP (Peru), for funding two shorts stays at UPV/EHU., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synthesis of new Ln4(Al2O6F2)O2 (Ln = Sm, Eu, Gd) phases with a cuspidine-related structure

  • Morán-Ruiz, Aroa
  • Wain-Martin, A.
  • Orera, Alodia
  • Sanjuán, M. L.
  • Larrañaga, Aitor
  • Slater, P. R.
  • Arriortua, María Isabel
The first fluorination of the cuspidine-related phases of Ln4(Al2O7□)O2 (where Ln = Sm, Eu, Gd) is reported. A low-temperature reaction with poly(vinyl-idene difluoride) lead to the fluorine being substituted in place of oxygen and inserted into the vacant position between the dialuminate groups. X-ray photoelectron spectroscopy shows the presence of the F 1s photoelectron together with an increase in Al 2p and rare-earth 4d binding energies supporting F incorporation. Energy-dispersive X-ray spectroscopy analyses are consistent with the formula Ln4(Al2O6F2)O2, confirming that substitution of one oxygen by two fluoride atoms has been achieved. Rietveld refinements show an expansion in the cell upon fluorination and confirm that the incorporation of fluoride in the Ln4(Al2O7□)O2 structure results in changes in Al coordination from four to five. Thus, the isolated tetrahedral dialuminate Al2O7 groups are converted to chains of distorted square-based pyramids. These structural results are also discussed based on Raman spectra., This research was funded by the Ministerio de Economía, Industria y Competitividad (MAT2016-76739-R) (AEI/FEDER, UE), and Departamento de Educación of the Basque Government (IT-630–13). The authors thank SGIker of UPV/EHU for technical and personnel support. A. Mora´nRuiz thanks UPV/EHU for funding., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of the synthesis conditions on the properties of La0.15Sm0.35Sr0.08Ba0.42FeO3 − δ cathode material for SOFCs

  • Vidal, Karmele
  • Larrañaga, Aitor
  • Morán-Ruiz, Aroa
  • Laguna-Bercero, M. A.
  • Baker, Robert T.
  • Arriortua, María Isabel
The perovskite La0.15Sm0.35Sr0.08Ba0.42FeO3 − δ has been prepared by the glycine nitrate (GNC) route, varying the fuel/oxidizer ratio (glycine/nitrate, G/N = 1 and 2) and cooling rate (slow cooling and air-quenched), in order to study the influence of sample preparation on the materials' properties, in the context of their application as a cathode material for SOFCs. For this, the performance of the prepared mixed ion and electron conducting perovskite oxides is dictated by their structure, oxygen stoichiometry (3 − δ), chemical composition and thermal expansion properties. High-resolution Synchrotron X-ray powder diffraction patterns were collected at room temperature and at 700 and 800 °C. It was found that the materials had a cubic crystal structure at these temperatures. As expected, 3 − δ decreased as temperature increased, and was slightly smaller for the quenched sample. Higher electrical conductivity values were obtained for the sample with G/N = 1 (air-quenched) in the cooling rate. At 700 and 800 °C the cathode synthesized with G/N = 1 and air-quenched showed the smallest polarization resistance values in impedance spectroscopy studies. Therefore, the physicochemical and electrochemical characterization clearly demonstrated the influence of the synthetic conditions on the cathode performance., This research has been funded by the Ministerio de Economía, Industria y Competitividad (MAT2016-76739-R (AEI/FEDER, UE) and MAT2015-86078-R), and Departamento de Educación of the Basque Government (IT-630-13). The authors thank SGIker of UPV/EHU for technical and personnel support. This work was benefited from the BL04-MSPD beamline at ALBA. The authors thank Dr. Francois Fauth of the Experiments Division of ALBA for his assistance in situ synchrotron measurements. K. Vidal thanks UPV/EHU for funding., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Scalable synthetic method for SOFC compounds

  • Wain-Martin, A.
  • Morán-Ruiz, Aroa
  • Vidal, Karmele
  • Larrañaga, Aitor
  • Laguna-Bercero, M. A.
  • Arriortua, María Isabel
Although economically competitive SOFC systems seems to be ready for commercialization, a broad inventory of key starting materials and fabrication processes are needed to enhance systems and reduce costs. These necessities are raised by the demands for large scale SOFC industrial production. Taking into account these reasons, we have synthesized the mean components of a fuel cell, on a large scale, by the glycine nitrate combustion method. The synthesized different components of SOFC have been the interconnector protective coating (MnCo1.9Fe0.1O4), contact layer (LaNi0.6Fe0.4O3), cathode (La0.6Sr0.4FeO3), interlayer (Sm0.2Ce0.8O1.9), electrolyte (ZrO2)0.92(Y2O3)0.08 and anode (Ni0.3O-(ZrO2)0.92(Y2O3)0.08) material, obtaining reproducible pure samples and amounts up to 12 g for each batch, being able to increase easily this amount to lots of hundred of grams. The obtained materials have been characterized by inductively coupled plasma atomic emission spectroscopy (ICP-AES) and X-ray fluorescence (XRF), X-ray diffraction (XRD), dilatometry, scanning electron microscopy (SEM), particle size distribution and conductivity measurements., This research has been funded by the Ministerio de Economía, Industria y Competitividad (MAT2016-76739-R) (AEI/FEDER, UE) and (MAT2015-2015-86078-R) and Dpto. Educación of the Basque Goverment (IT-630-13). The authors thanks the support received by the European Regional Development Fund (ERDF). SGIker of UPV/EHU technical support is gratefully acknowledged. A. Wain-Martin thanks Ministerio de Economía y Competitividad for funding his work (BES-2014-068433)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

SOFC cathodic layers using wet powder spraying technique with self synthesized nanopowders

  • Wain-Martin, A.
  • Morán-Ruiz, Aroa
  • Laguna-Bercero, M. A.
  • Campana, Roberto
  • Larrañaga, Aitor
  • Slater, P. R.
  • Arriortua, María Isabel
In this work, a wet powder spraying method has been investigated as a facile low cost route to deposit electrode layer on SOFC electrolyte support. A particular focus has been examining the interfacial stability of the deposited layers, and determining the influence of the thickness of the different layers, as well as the ball milling regime used to produce the electrode inks. The developed system consist of an yttria stabilized zirconia electrolyte support, a La0.6Sr0.4FeO3 (LSF) cathode, a Sm0.2Ce0.8O1.9 (SDC) barrier layer between the electrolyte and the cathode, and LaNi0.6Fe0.4O3 (LNF) as a contact layer, for a future integration with the SOFC interconnector. The electrolyte supports (300 μm thickness and 9 mm diameter) supports were prepared by uniaxial pressing, while the deposition of thin barrier layers, cathode and contact layer were carried out by manual spray coating., This research has been funded by the Ministerio de Economía, Industria y Competitividad [MAT2016-76739-R and MAT2015-68078-R] [AEI/FEDER, UE] and Dpto. Educación of the Basque Government [IT-630-13]. The authors thanks the support received by the European Regional Development Fund (ERDF). The technical support of SGIker of UPV/EHU is gratefully acknowledged. A. Wain-Martin thanks Ministerio de Economía y Competitividad for funding his work [BES-2014-068433]., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Synthesis of new Ln4(Al2O6F2)O2 (Ln = Sm, Eu, Gd) phases with a cuspidine-related structure

  • Morán-Ruiz, A.
  • Wain-Martin, A.
  • Orer, A.
  • Sanjuán, M.L.
  • Larrañaga, A.
  • Slater, P.R.
  • Arriortua, M.
The first fluorination of the cuspidine-related phases of Ln4(Al2O7¿)O2 (where Ln = Sm, Eu, Gd) is reported. A low-temperature reaction with poly(vinyl­idene difluoride) lead to the fluorine being substituted in place of oxygen and inserted into the vacant position between the dialuminate groups. X-ray photoelectron spectroscopy shows the presence of the F 1s photoelectron together with an increase in Al 2p and rare-earth 4d binding energies supporting F incorporation. Energy-dispersive X-ray spectroscopy analyses are consistent with the formula Ln4(Al2O6F2)O2, confirming that substitution of one oxygen by two fluoride atoms has been achieved. Rietveld refinements show an expansion in the cell upon fluorination and confirm that the incorporation of fluoride in the Ln4(Al2O7¿)O2 structure results in changes in Al coordination from four to five. Thus, the isolated tetrahedral dialuminate Al2O7 groups are converted to chains of distorted square-based pyramids. These structural results are also discussed based on Raman spectra.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Combustion synthesis and characterization of Ln1-xMxCr0.9Ni0.1O3 (Ln = La and/or Nd; M = Sr and/or Ca; x = 0.25) perovskites for SOFCs anodes

  • Ortega-San-Martín, L.
  • Morán-Ruiz, A.
  • Wain-Martin, A.
  • Vidal, K.
  • Larrañaga, A.
  • Laguna-Bercero, M.A.
  • Arriortua, M.I.
A series of chromite perovskites with the general formula Ln1-xMxCr0.9Ni0.1O3 (Ln = La and/or Nd; M = Sr and/or Ca; x = 0.25) has been prepared by three combustion synthesis routes using a different combustible substance each time: glycine, urea and sucrose. In order to isolate the effect of divalent dopant concentration from the A cation steric effects, the whole group has a fixed mean A cation radius, < rA> ˜ 1.22 Å and cation size disorder, s2(rA) ˜ 0.0001 Å2, but variable doping x. Their crystal structure, microstructure, electrical properties and expansion coefficients have been investigated on the basis of their possible use as anode materials for intermediate temperature solid oxide fuel cells (SOFC). Cell parameters, grain sizes, expansion coefficients and conductivities all are found to be dependent on x and the combustible substance used. The most interesting relationship is the negative dependence of the conductivity with x under H2 atmosphere: conductivity decreases with doping which is the opposite to the expected behavior for a p-type doped perovskites and has not been reported before.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

SOFC cathodic layers using wet powder spraying technique with self synthesized nanopowders

  • Wain-Martin, A.
  • Morán-Ruiz, A.
  • Laguna-Bercero, M.A.
  • Campana, R.
  • Larrañaga, A.
  • Slater, P.R.
  • Arriortua, M.I.
In this work, a wet powder spraying method has been investigated as a facile low cost route to deposit electrode layer on SOFC electrolyte support. A particular focus has been examining the interfacial stability of the deposited layers, and determining the influence of the thickness of the different layers, as well as the ball milling regime used to produce the electrode inks. The developed system consist of an yttria stabilized zirconia electrolyte support, a La 0.6 Sr 0.4 FeO 3 (LSF) cathode, a Sm 0.2 Ce 0.8 O 1.9 (SDC) barrier layer between the electrolyte and the cathode, and LaNi 0.6 Fe 0.4 O 3 (LNF) as a contact layer, for a future integration with the SOFC interconnector. The electrolyte supports (300 µm thickness and 9 mm diameter) supports were prepared by uniaxial pressing, while the deposition of thin barrier layers, cathode and contact layer were carried out by manual spray coating.