Pasar al contenido principal

PRODUCCION DE GRAFENOS DE DISTINTAS CARACTERISTICAS A TRAVES DE OXIDO DE GRAFITO PARA NANOCOMPOSITES DE BASE POLIMERICA

MAT2013-48107-C3-1-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2013
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Outstanding electrochemical performance of a graphene-modified graphite felt for vanadium redox flow battery application

  • González Arias, Zoraida
  • Flox, Cristina
  • Blanco Rodríguez, Clara
  • Granda Ferreira, Marcos
  • Morante, Joan Ramón
  • Menéndez López, Rosa María
  • Santamaría Ramírez, Ricardo
The development of more efficient electrode materials is essential to obtain vanadium redox flow batteries (VRFBs) with enhanced energy densities and to make these electrochemical energy storage devices more competitive. A graphene-modified graphite felt synthesized from a raw graphite felt and a graphene oxide water suspension by means of electrophoretic deposition (EPD) is investigated as a suitable electrode material in the positive side of a VRFB cell by means of cyclic voltammetry, impedance spectroscopy and charge/discharge experiments. The remarkably enhanced performance of the resultant hybrid material, in terms of electrochemical activity and kinetic reversibility towards the VO2+/VO2+, and mainly the markedly high energy efficiency of the VRFB cell (c.a. 95.8% at 25 mA cm−2) can be ascribed to the exceptional morphological and chemical characteristics of this tailored material. The 3D-architecture consisting of fibers interconnected by graphene-like sheets positively contributes to the proper development of the vanadium redox reactions and so represents a significant advance in the design of effective electrode materials., The authors thank MINECO (projects MAT2013-48107-C3-1-R, INNPACTO IPT-2011- 1690-920000 and NANO-EN-ESTO MAT2010-2015), Principado de Asturias (Fondo Europeo de Desarrollo Regional: GRUPIN 14-118) and the European Regional Development Funds (ERDF, FEDER Programa Competitivitat de Catalunya 2007-2013) for their financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Graphene patterning by nanosecond laser ablation: the effect of the substrate interaction with graphene

  • Pérez Mas, Ana Matilde
  • Álvarez Rodríguez, Patricia
  • Campos, Nuria
  • Gómez, David
  • Menéndez López, Rosa María
This paper focuses on the development of patterned graphene/substrate by means of green nanosecond pulse laser irradiation. Monolayer graphene samples supported on a Si/SiO2 substrate were patterned using 532 nm laser irradiation under fluence conditions ranging from 31 mJ/cm2 and to 4240 mJ/cm2. Raman spectroscopy was used to investigate the effect of laser irradiation on the graphene. It was found that at 356 mJ/cm2 selective ablation of the graphene occurs. However, at fluence values above 1030 mJ/cm2 (when damage to the substrate is observed) no ablation of the graphene takes place. In contrast, its graphenic structure was found to have been modified. Only at fluence values where the ablation of the substrate occurs, is graphene eliminated in an area almost equivalent to that of the ablated substrate. In this case, additional damage to the graphene sheet edges is produced. The increment in the number of oxygenated functional groups in these regions, as measured by XPS spectroscopy, suggests that this damage is probably caused by thermal phenomena during the ablation of the substrate., The research leading to these results has received funding from the European Union’s Research Fund for Coal and Steel research program under Grant Agreement number RFCR-CT-2013-00006 and the European Union Seventh Framework Programme (FP7/ 2007-2013) under grant agreement nº 600849 (INSIDDE Project). Assistance from the Spanish MINECO (project ref: MAT2013-48107-C3-1-R) and the Principado de Asturias-PCTI (Ramon y Cajal research contract [GRUPINN 14-118] of Dr. P. Álvarez and Severo Ochoa pre-doctoral grant of AM. P. Mas) is also acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Multifunctional Silicone Rubber Nanocomposites by Controlling the Structure and Morphology of Graphene Material

  • Sánchez-Hidalgo, Rubén
  • Blanco, Clara
  • Menéndez López, Rosa María
  • Verdejo, Raquel
  • López-Manchado, Miguel A.
Multifunctional elastomer nanocomposites have been applied in several high-tech fields. The design of materials with tailored properties capable of tuning their performance is a topical challenge. Here, we demonstrate that it is possible to modulate the mechanical and transport properties of silicone rubber nanocomposites by controlling the structure, chemical composition and morphology of the graphene material. Intrinsic graphene properties, such as remaining oxygen groups, specific surface area, and aspect ratio, among others, have a profound effect on the final properties of the nanocomposite. Thus, the thermal conductivity benefits from larger filler size and high aromatic restoration. Whereas mechanical properties and electrical conductivity require a proper balance between filler/polymer matrix interaction and a partial aromatic restoration., This research was funded by MINECO, grant number MAT2016-81138-R. R.S. thanks to MINECO for the Predoctoral grant BES-2014-070802, We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI), Peer reviewed