Pasar al contenido principal

MATERIALES COMPUESTOS MULTIFUNCIONALES JERARQUICOS Y AUTOREPARABLES PARA EL SECTOR DEL TRANSPORTE Y ENERGIA

MAT2016-81138-R

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2016
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 20
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Epoxy Nanocomposites filled with Carbon Nanoparticles

  • Martin-Gallego, Mario
  • Yuste, Vanesa
  • Sánchez-Hidalgo, Rubén
  • Verdejo, Raquel
  • López-Manchado, Miguel A.
Dedicated to Prof. Eduardo Ruiz-Hitzky, a great scientist and a better person with whom we had the pleasure to work with., Over the past decades, the development of high performance lightweight polymer nanocomposites and, in particular, of epoxy nanocomposites has become one the greatest challenges in material science. The ultimate goal of epoxy nanocomposites is to extrapolate the exceptional intrinsic properties of the nanoparticles to the bulk matrix. However, in spite of the efforts, this objective is still to be attained at commercially attractive scales. Key aspects to achieve this are ultimately the full understanding of network structure, the dispersion degree of the nanoparticles, the interfacial adhesion at the phase boundaries and the control of the localization and orientation of the nanoparticles in the epoxy system. In this Personal Account, we critically discuss the state of the art and evaluate the strategies to overcome these barriers, The authors gratefully acknowledge the financial support of the State Secretariat for Research, Development and Innovation of the Spanish Ministry of Economía y Competitividad, through the project MAT2016-81138-R. RSH also thanks MINECO for a FPI fellowship BET-2014-070802., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A comparative study on the mechanical, electrical and piezoresistive properties of polymer composites using carbon nanostructures of different topology

  • Avilés, F.
  • May-Pat, A.
  • López-Manchado, Miguel A.
  • Verdejo, Raquel
  • Bachmatiuk, A.
  • Rümmeli, Mark H.
The mechanical properties, electrical conductivity and piezoresistive response of thermosetting polymer nanocomposites comprising carbon nanotubes (CNTs, one-dimensional topology, 1D), few-layer thermally reduced graphene oxide (FLG, two-dimensional topology, 2D), cubic-shaped few-layer graphene shells (CGSs, three-dimensional topology, 3D), and hybrid combinations of them (1D-2D and 1D-3D) are investigated. It is observed that the most electro-conductive materials are formed when CGSs, CNTs or a hybrid combination of both are used, likely because of the lower defect density of CGSs and the higher aspect ratio of CNTs. The mechanical properties and piezoresistive sensitivity are higher for composites comprising CNTs or a 1D-2D hybrid combination of CNTs and FLGs. While the increased mechanical properties for these two groups of composites are attributed to the higher aspect ratio/lateral size, higher number of dangling bonds and functionalities, and higher specific surface area (for the case of FLGs) of their fillers, the increased piezoresistive sensitivity is explained in terms of their higher excluded volume within the composite., This work was supported by CONACYT grant number 220513 under the direction of Dr. FA. Support of the infrastructure (Raman-AFM equipment) acquired through CONACYT project No. 268595 is also appreciated. MALM thanks support from the MINECO project MAT2016-81138-R. MHR thanks the National Science Foundation China (NSFC Project 51672181), the National Science Center (Poland) for the financial support within the frame of the Opus program (Grant agreement 2015/19/B/ST5/03399). The authors thank Santiago Duarte (CICY) for SEM imaging, Martín Baas and Dr. Daniela Pacheco from the CICY’s Energy department for the BET measurements. Technical assistance of Dr. Jesús Kú for sample preparation and testing at CICY is appreciated, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synthesis of fluorinated graphene oxide by using an easy one-pot deoxyfluorination reaction

  • Aguilar-Bolados, H.
  • Contreras-Cid, A.
  • Yazdani-Pedram, Mehrdad
  • Acosta-Villavicencio, G.
  • Flores, M.
  • Fuentealba, Pablo
  • Neira-Carrillo, A.
  • Verdejo, Raquel
  • López-Manchado, Miguel A.
The fluorination of two types of graphene oxides conducted by an easy and scalable deoxyfluorination reaction is reported. This reaction was carried out using diethylaminodifluorosulfinium tetrafluoroborate, a stable compound and an efficient reagent for replacing oxygenated functional groups of graphene oxide by fluoride. The graphene oxide produced by the Hummers’ method (GOH) showed lower reactivity than that produced by the Brodie's method (GOB). X-ray photoelectron spectroscopy indicated that the highest fluorination degree achieved was 4.7 at.% when GOB was used, and the C–F character corresponds to semi-ionic bonds. Additionally, a partial reduction of GO was concomitant with the functionalization reaction. The deoxyfluorination reaction changed the crystalline structure of GO, favoring the reconstruction of Csp structure of the graphene lattice and reducing the number of stacked layers. The fluorination led to the modification of the electronic band structure of this material, increasing the band gap from 2.05 eV for GOB to 3.88 eV for fluorinated GOB, while for GOH the low flurionation led to a slight increase of the band gap, from 3.48 eV to 3.57 eV., This research was supported by National Commission for Scientific and Technological Research (CONICYT), Chile, under Postdoctoral fellowship N 3170104 granted to H. Aguilar-Bolados, Vice Presidency of Research and Development (VID), Universidad de Chile, Chile, under project Enlaces NENL010/2017 granted to M. Yazdani-Pedram and Spanish Ministry of Science and Innovation (MICINN), Spain, under project MAT2016-81138-R., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nitrile butadiene rubber composites reinforced with reduced graphene oxide and carbon nanotubes show superior mechanical, electrical and icephobic properties

  • Valentini, L.
  • Bittolo Bon, S.
  • Hernández, Marianella
  • López-Manchado, Miguel A.
  • Pugno, N. M.
In this article, we examine the effects of two different nanostructured carbons when they are incorporated in a rubber matrix in terms of mechanical and electrical properties as well as the icephobic behaviour of the nanocomposites when swollen. Nitrile butadiene rubber composites reinforced with thermally reduced graphene oxide or multiwalled carbon nanotubes or both of them were prepared and characterized. At a particular hybrid filler loading, tensile and electrical tests showed a significant improvement of the composite. From the swelling studies, after the immersion, the nanocomposites experienced a reduction of the cross-link density that promotes weakening of ice adhesion, being this effect more evident for those samples prepared with hybrid fillers. In view of the composite formulations, that utilize commercially available elastomers and fillers, these findings would be applicable to the automotive and aviation sectors, where the demand for multifunctional rubbers is increasing., N.M.P. is supported by the European Commission H2020 under the Graphene Flagship Core 1 No. 696656 (WP14 00Polymer composites>) and FET Proactive >Neurofibres> grant No. 732344. M.A.L.M. thanks the support from the MINECO project MAT2016- 81138-R. SERMS srl (Terni - Italy) is kindly aknowledged for aging the composites in climatic chamber, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synergistic icephobic behaviour of swollen nitrile butadiene rubber graphene and/or carbon nanotube composites

  • Valentini, L.
  • Bittolo Bon, S.
  • Pugno, N. M.
  • Hernández, Marianella
  • López-Manchado, Miguel A.
  • Giorgi, G.
Spontaneous change of adhesion of solidifying liquid on surfaces is of significant importance in materials technology where it finds applications such as anti-icing components operating in extreme environments like those of seals. In this work, nitrile butadiene rubber (NBR) composites reinforced with graphene, carbon nanotubes, and a mix of them after immersion in several fluids, experienced both a swelling and a reduction of the cross-link density that reduces ice adhesion, being this effect more evident for graphene containing samples. These results have been rationalized via a first principles atomistic modellization of interfaces formed by ice water of increasing thickness and graphene and scaling laws from fracture mechanics, revealing a clear synergy between swelling and nanocarbon phase in the icephobic nature of the composite, dictated by a competition between elastic modulus and adsorption energy. These findings could find an upscale in component validation readily applied to different areas where de-icing demands handling of large amount of environmental harmful agents., GG wants to thank CINECA [grant number HP10CN7DI0] and acknowledge PRACE for awarding us access to resource Marconi based in Italy at CINECA [Grant number Pra14_3664]. G.G. is similarly grateful to CARIT [grant number FCARITR17FR]” for supporting this research. MALM thanks the support from the MINECO [grant number MAT2016- 81138-R]. NMP is supported by the European Commission under the Graphene Flagship Core2 [WP14 “Composites” grant number 785219] and FET Proactive “Neurofibres” [grant number 732344]. NMP is supported by theItalian Ministry of Education, University and Research (MIUR) under the “Departments of Excellence” grant L.232/2016. LV is supported by the European Commission under the Graphene Flagship Core2 [WP14 “Composites” grant number 785219]. LV and GG rea supported by the Italian Ministry of Education, University and Research (MIUR) under the “Departments of Excellence” grant L.232/2016, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Structural characterization and thermal degradation of poly(methylmethacrylate)/zinc oxide nanocomposites

  • Djahnit, L.
  • Sened, N.
  • El-Miloudi, K.
  • López-Manchado, Miguel A.
  • Haddaoui, N.
This work is based on the preparation of composites of poly(methylmethacrylate) with zinc oxide nanoparticles synthesized by solution casting method. Chloroform cast poly(methylmethacrylate) films containing different amounts of ZnO nanoparticles were characterized by XRD, SEM, UV-vis spectroscopy, FTIR spectroscopy and TGA. The results show that ZnO nanoparticles with a size of 24 nm were fairly dispersed in the polymer matrix. The obtained material had UV shielding capability with optical transparency. Thermal characterization shows that, the nanocomposites were more thermally stable than pure PMMA presenting three degradation steps. Apparent kinetic parameters were determined for each degradation step using peak fitting methodology. According to activation energies, ZnO particles affect simultaneously but oppositely the kinetics of underlying degradation reactions. Thermal stability of the PMMA/ZnO nanocomposites was the result of the overall balance in favor of the inhibiting effect of ZnO., The authors acknowledge the financial support of CNEPRU project N E00720140050. MALM thanks the support from the MINECO project MAT2016-81138-R. The authors appreciate the assistance of ICTP/ SCIC technical staff., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Preparation and Mechanical Properties of Graphene/Carbon Fiber-Reinforced Hierarchical Polymer Composites

  • Vázquez-Moreno, Jose M.
  • Sánchez-Hidalgo, Rubén
  • Sanz-Horcajo, Estela
  • Viña, Jaime
  • Verdejo, Raquel
  • López-Manchado, Miguel A.
Conventional carbon fiber-reinforced plastics (CFRP) have extensively been used as structural elements in a myriad of sectors due to their superior mechanical properties, low weight and ease of processing. However, the relatively weak compression and interlaminar properties of these composites limit their applications. Interest is, therefore, growing in the development of hierarchical or multiscale composites, in which, a nanoscale filler reinforcement is utilized to alleviate the existing limitations associated with the matrix-dominated properties. In this work, the fabrication and characterization of hierarchical composites are analyzed through the inclusion of graphene to conventional CFRP by vacuum-assisted resin infusion molding., This research was funded by the Spanish Ministerio de Economía y Competitividad (MINECO), grant number MAT2016-81138-R, We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Multifunctional Silicone Rubber Nanocomposites by Controlling the Structure and Morphology of Graphene Material

  • Sánchez-Hidalgo, Rubén
  • Blanco, Clara
  • Menéndez López, Rosa María
  • Verdejo, Raquel
  • López-Manchado, Miguel A.
Multifunctional elastomer nanocomposites have been applied in several high-tech fields. The design of materials with tailored properties capable of tuning their performance is a topical challenge. Here, we demonstrate that it is possible to modulate the mechanical and transport properties of silicone rubber nanocomposites by controlling the structure, chemical composition and morphology of the graphene material. Intrinsic graphene properties, such as remaining oxygen groups, specific surface area, and aspect ratio, among others, have a profound effect on the final properties of the nanocomposite. Thus, the thermal conductivity benefits from larger filler size and high aromatic restoration. Whereas mechanical properties and electrical conductivity require a proper balance between filler/polymer matrix interaction and a partial aromatic restoration., This research was funded by MINECO, grant number MAT2016-81138-R. R.S. thanks to MINECO for the Predoctoral grant BES-2014-070802, We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Transport properties of one-step compression molded epoxy nanocomposite foams

  • Martin-Gallego, Mario
  • López-Hernández, Emil
  • Pinto, Javier
  • Rodriguez-Perez, Miguel A.
  • López-Manchado, Miguel A.
  • Verdejo, Raquel
© The Author(s)., Owing to their high strength and stiffness, thermal and environmental stability, lower shrinkage, and water resistance, epoxy resins have been the preferred matrix for the development of syntactic foams using hollow glass microspheres. Although these foams are exploited in multiple applications, one of their issues is the possibility of breakage of the glass hollow microspheres during processing. Here, we present a straightforward and single-step foaming protocol using expandable polymeric microspheres based on the well-established compression molding process. We demonstrate the viability of the protocol producing two sets of nanocomposite foams filled with carbon-based nanoparticles with improved transport properties., The authors gratefully acknowledge the financial support of MINECO, through the project MAT2016-81138-R., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Removal of surfactant from nanocomposites films based on thermally reduced graphene oxide and natural rubber

  • Aguilar Bolados, H.
  • Contreras-Cid, A.
  • Neira-Carrillo, A.
  • López-Manchado, Miguel A.
  • Yazdani-Pedram, Mehrdad
© The Author(s)., Electrically conducting elastomer composites based on natural rubber and reduced graphene oxide (rGO) is reported. These composites were prepared by a latex method and an easy washing process. The latex method consists of the mixing of an aqueous suspension of rGO, stabilized by sodium dodecyl sulfate and pre-vulcanized natural rubber, followed by solvent casting. The percolation threshold of composites was estimated at 1.54 wt.% of rGO. The washing process allowed elimination of the surfactant completely from nanocomposites. The absence of surfactant in nanocomposites was demonstrated by Raman spectroscopy and dynamo-mechanical analysis. The surfactant-free nanocomposites showed improved mechanical and electrical properties., Miguel Lopez-Manchado thanks the support from MINECO (grant number MAT2016-81138-R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A Methodology Towards Mechanical Properties Optimization of Three-Component Polymers by the Gradual Variation of Feed Composition in Semi-Continuous Emulsion-Free Radical Polymerization

  • Rivera-Gálvez, Francisco J.
  • González-Ortiz, Luis J.
  • López-Manchado, Miguel A.
  • Hernández-Hernández, María E.
  • Jasso-Gastinel, Carlos F.
© 2019 by the authors., In this work, a new methodology for the synthesis of three-component polymers (TCPs) was developed using a seeded, semi-continuous free-radical emulsion polymerization towards the optimization of the moduli–ultimate deformation performance and energy dissipation capacity for a styrene (S), n-butyl acrylate (BA), and 4-vinylbenzyl chloride (VBC) system. The three components were sequentially fed in pairs, varying feed composition along the conversion using S as the common monomer. To prepare a reference material, an industrial method was utilized with those monomers, using an equivalent global composition in a two-stage batch process (TS). Nanophase formation in the particles was observed by transmission electron microscopy (TEM), while the separation of the phases in the solid samples was observed by atomic force microscopy (AFM). The changes in glass transition temperature were determined by differential scanning calorimetry (DSC) and dynamic mechanical analysis (DMA). The latter was primarily used to compare mechanodynamic properties as a function of temperature for the two synthesis methods used. Thus, the higher toughness of the forced composition three-component polymeric materials was evaluated by means of their energy dissipation capacity, toughness, and stress–strain measurements at several temperatures., The authors thank the Universidad de Guadalajara, CONACyT and ICTP for financial support and to MINECO’s support (project MAT2016-81138-R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

El futuro del sector transporte: materiales compuestos auto-reparables

  • Peñas-Caballero, Mónica
  • Araujo-Morera, Javier
  • Hernández, Marianella
  • Verdejo, Raquel
  • López-Manchado, Miguel A.
La auto-reparación, es la capacidad de un material, de repararse de forma autónoma, tras sufrir un daño por su uso, agresiones externas, etc. Este comportamiento es una alternativa eficiente para aumentar la vida útil de un material. En este trabajo, se analiza la capacidad auto-reparadora de matrices termoestables y elastómeros, materiales ampliamente usados en el sector transporte. Los resultados preliminares revelan una capacidad de reparación del 50 %. Estos resultados marcan el inicio en el desarrollo de materiales innovadores, que reducirán los contenidos de residuos y permitirán su reutilización, todo ello englobado dentro de los principios de economía circular., Se agradece al Ministerio de Ciencia, Innovación y Universidades (MICINN) por la financiación recibida (MAT2016-81138-R, MAT2015-73392-JIN) y a Signus por proveer el neumático fuera de uso empleado. Mónica Peñas Caballero agradece al MICINN por la beca FPI (Formación del Personal Investigador)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Materiales compuestos jerárquicos

  • Vázquez-Moreno, Jose M.
  • Sánchez-Hidalgo, Rubén
  • Sanz-Horcajo, Estela
  • Viña, J.
  • Verdejo, Raquel
  • López-Manchado, Miguel A.
Los plásticos reforzados con fibra continua (FRP) se utilizan extensamente como elementos estructurales en una gran variedad de sectores, como el civil, transporte, energía, o marina, entre otros, gracias a sus excelentes propiedades mecánicas y bajo peso. Sin embargo, su relativa debilidad a la compresión y propiedades interlaminares limita su campo de aplicación. Por ello, ha surgido un creciente interés en el desarrollo de materiales compuestos jerárquicos o multiescalares, en los que un refuerzo con dimensiones nanométricas se introduce en los FRP convencionales. La mayoría de los trabajos se han centrado en el uso de los nanotubos de carbono (CNTs) debido a sus extraordinarias propiedades intrínsecas. Además de sus buenas propiedades mecánicas, los CNTs poseen excelentes propiedades eléctricas y térmicas, lo que les convierte en un material atractivo como refuerzo de matrices poliméricas. Los CNTs proporcionan refuerzo intralaminar e interlaminar, mejorando así, la resistencia a la delaminación y las propiedades en dirección al espesor, sin por ello, comprometer las propiedades en la dirección al plano. En los últimos años, ha surgido un gran interés en el uso del grafeno como refuerzo de nanocompuestos poliméricos. Con respecto a los CNTs, el grafeno presenta ventajas como un menor coste, mayor área superficial y mayor facilidad de procesado. El grafeno se dispersa más fácilmente en la resina y provoca un menor aumento de la viscosidad, lo cual facilita la impregnación de las fibras. En este trabajo, se analiza la fabricación y caracterización de materiales compuestos jerárquicos de resina epoxi y fibra de carbono continua reforzado con grafeno como fase nanométrica, mediante el proceso de infusión de resina asistida por vacío.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Dielectric Properties of All-Organic Coatings: Comparison of PEDOT and PANI in Epoxy Matrices

  • Yuste, Vanesa
  • González González, Francisco José
  • Hoyos, Mario
  • López-Manchado, Miguel A.
  • Verdejo, Raquel
© 2020 by the authors., The technological demands imposed on dielectrics and electrical insulation materials are being increasing with the transition from traditional to smart grids. Epoxy resin/conductive polymer (CP) blends with high dielectric permittivity have been prepared by means of a straightforward methodology. Poly(3,4-ethylenedioxythiophene) (PEDOT) and polyaniline (PANI), doped with p-tosylate and ammonium peroxide sulfate (APS), respectively, were synthesized and blended with an epoxy matrix. The addition of 3 wt % of PEDOT and PANI results in permittivity values of 68.9 and 9.5, respectively at 0.1 Hz—1300 and 111 times higher than pure resin. Hence, PEDOT is more effective than PANI at improving the permittivity of the epoxy resin. Moreover, the material retains the electrical insulation of the resin and exhibits a slight increase in thermal conductivity., This research was funded by MINECO, grant number MAT2016-81138-R., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

SEBS-Grafted Itaconic Acid as Compatibilizer for Elastomer Nanocomposites Based on BaTiO3 Particles

  • Aguilar Bolados, H.
  • Quijada, Raúl
  • Yazdani-Pedram, Mehrdad
  • Maldonado-Magnere, Santiago
  • Verdejo, Raquel
  • López-Manchado, Miguel A.
© 2020 by the authors., Itaconic acid (IA) is an organic acid produced by the fermentation of sugars with aspergillus. It has been identified as one of the top 12 building-block chemicals. Here, we report the use of IA as a possible substitute to petroleum-based compatibilizers in polymer composite. We applied this study to thermoplastic elastomers based on styrene copolymers, since they are commonly used in blends and composites. Poly(styrene-b-ethylene-butylene-b-styrene) (SEBS) was grafted with 2.6 wt.% of itaconic acid (SEBS-g-IA) prepared by a reactive melt-mixing process, and was subsequently used to prepare composites filled with BaTiO3.). IA was successfully grafted as demonstrated by FTIR and XRD. SEBS-g-IA composites presented better mechanical properties, achieving an increase of Young modulus up to 80% compared with the neat polymer. This was ascribed to better dispersion and compatibility with the filler. Additionally, SEBS-g-IA showed increased dielectric permittivity, i.e., showed increased polarity, which indicates that it could potentially be used as a modifier for specialized polymers., This research was supported by National Commission for Scientific and Technological Research (CONICYT), Chile, under Postdoctoral fellowship FONDECYT N° 3,170,104 granted to H. Aguilar-Bolados. R. Quijada, H Aguilar-Bolados and M ¡ Yazdani-Pedram acknowledge the financial support from CONICYT (FONDECYT N° 1191642). R. Verdejo and M. A. Lopez-¡ Manchado acknowledge the financial support from the MINECO (grant number MAT2016-81138-R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Highly Deformable Porous Electromagnetic Wave Absorber Based on Ethylene–Propylene–Diene Monomer/Multiwall Carbon Nanotube Nanocomposites

  • Bizhani, Hasti
  • Katbab, Ali Asghar
  • López-Hernández, Emil
  • Miranda, Jose Miguel
  • Verdejo, Raquel
© 2020 by the authors., The need for electromagnetic interference (EMI) shields has risen over the years as the result of our digitally and highly connected lifestyle. This work reports on the development of one such shield based on vulcanized rubber foams. Nanocomposites of ethylene–propylene–diene monomer (EPDM) rubber and multiwall carbon nanotubes (MWCNTs) were prepared via hot compression molding using a chemical blowing agent as foaming agent. MWCNTs accelerated the cure and led to high shear-thinning behavior, indicative of the formation of a 3D interconnected physical network. Foamed nanocomposites exhibited lower electrical percolation threshold than their solid counterparts. Above percolation, foamed nanocomposites displayed EMI absorption values of 28–45 dB in the frequency range of the X-band. The total EMI shielding efficiency of the foams was insignificantly affected by repeated bending with high recovery behavior. Our results highlight the potential of cross-linked EPDM/MWCNT foams as a lightweight EM wave absorber with high flexibility and deformability, This research was funded by MICIU, grant number MAT2016-81138-R., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Flexural electromechanical properties of multilayer graphene sheet/carbon nanotube/vinyl ester hybrid nanocomposites

  • Sierra-Chi, C. A.
  • Aguilar-Bolados, H.
  • López-Manchado, Miguel A.
  • Verdejo, Raquel
  • Cauich-Rodríguez, Juan V.
  • Avilés, F.
The electrical, mechanical and piezoresistive responses of vinyl ester nanocomposites made of two types of multilayer graphene sheets (GSs) and multiwall carbon nanotube hybrid fillers at different relative concentrations is presented. Two types of GSs are used in order to evaluate the role of their physicochemical properties. The best mechanical properties were achieved with hybrids at 75% relative concentration of GSs. Collaborative effects were also observed in the electrical conductivity of the hybrids at this relative concentration. The flexural piezoresistive response yielded low sensitivity (with both, positive and negative gage factors) at the compression side of the flexural coupon. On the contrary, the tensile side of the coupon always presented positive resistance changes and significantly higher piezoresistive sensitivity. The highest piezoresistive sensitivity was found for hybrid materials with 75% relative concentration of GSs, using the graphenic sheets with larger lateral dimensions and higher structural quality (lower Raman I/I ratio)., This work was sponsored by CONACYT project No. 2262. CS Acknowledges CONACYT scholarship 240300 for his Doctoral studies. Support of the infrastructure acquired through CONACYT project No. 268595 (CICY) as well as the LANNBIO facilities at CINVESTAV-M�erida under the supervision of Dr. Patricia Quintana are kindly acknowledged. Raquel Verdejo and Miguel Angel Lopez Manchado acknowledge the Ministry of Science, Innovation and Universities in Spain for project MAT2016-81138-R. Technical assistance of Dr. Alejandro May Pat is highly appreciated. Authors also wish to acknowledge assistance of Jorge Ocampo Bello for his dedicated contribution with the electrical instrumentation, as well as that of Santiago Duarte Aranda and Rossana Faride Vargas Coronado for SEM. Technical assistance of Jos�e M. Baas Lopez for BET measurements as well as facilities provided by Dr. Daniela Pacheco for using the adsorption isotherm equipment acquired through the SENER-CONACYT energetic sustainability project No. 254667 is also appreciated., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Structure, thermal and mechanical properties of poly (ε-caprolactone)/organomodified clay bionanocomposites prepared in open air by in situ polymerization

  • Elghaoui, H.
  • Hrichi, S.
  • Raihane, M.
  • Arous, M.
  • Bouharras, F. Z.
  • Verdejo, Raquel
  • Beniazza, R.
  • Ilsouk, M.
  • López-Manchado, Miguel A.
  • Lahcini, M.
The first example of the usefulness of titanium (IV) butoxide, as initiators for open air in-situ intercalative polymerization of ε-caprolactone (ε-CL) in the presence of organoclay is herein reported. The bionanocomposites based on poly(ε-caprolactone) (PCL) were prepared by in-situ Ring Opening Polymerization (ROP) of ε-caprolactone in the presence of different organomodified montmorillonite clay (ODA-MMT) loading (1, 3 and wt%). Structural, thermal and mechanical characterizations of the resulting bionanocomposites were investigated. The presence of the nanoclay increased PCL crystallinity, melting temperature and thermal stability, whereas some decrease in T was observed. TEM analyses confirmed the good dispersion of ODA-MMT with 1 and 3 wt% content into the PCL polymer as already asserted by XRD diffraction. Finally, the Young's modulus of the PCL nanocomposites was higher compared to the neat PCL, while a decrease of stress and strain at break for materials with different filler content was observed., Financial support for cooperative research came from the Hassan II Academy of Science and Technology of Morocco/CSIC-Spain (Project AH11STC-nano 2011 – 2012 and 2010MA003), the MESRSFC and CNRST of Morocco (PPR program), and the bilateral scientific committee programs of collaboration between Morocco and Tunisia (n 17/TM/20), and the Spanish Ministry of Science and Innovation (MICINN) through the project MAT2016-81138-R., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synthesis of sustainable, lightweight and electrically conductive polymer brushes grafted multi-layer graphene oxide

  • Aguilar-Bolados, H.
  • Yazdani-Pedram, M.
  • Quinteros-Jara, E.
  • Cuenca-Bracamonte, Quimberly
  • Quijada, R.
  • Carretero-González, Javier
  • Avilés, F.
  • López-Manchado, Miguel A.
  • Verdejo, Raquel
This work reports the synthesis of poly (monomethyl itaconate) grafted multi-layer graphene oxide (PMMI-g-GO) by atom transfer radical polymerization using activators regenerated by electron transfer (ARGET-ATRP). PMMI-g-GO presents outstanding properties, such as a high electrical conductivity (5.04 S m), low number of stacked graphene layers (6) and I/I ratio of 2.05 estimated from Raman spectrum, which indicates the high quality of PMMI-g-GO as a graphenic material. In addition, polymer brushes based on PMMI represent a new green alternative for the development of polymer composite materials, since the monomer used for their production is obtained from a renewable source. Interestingly, the PMMI-g-GO nanomaterial is also capable of storing Li ions without the need of using electron conductive additives that are usually employed in the electrode's composition of conventional lithium ion batteries., his research was supported by the Chilean Agency for Research and Development (ANID) under Postdoctoral fellowship FONDECYT N◦3170104 granted to H. Aguilar-Bolados. H. Aguilar-Bolados also ac-knowledges to ANID the financial support under the grant FONDECYT project N◦1200437. M Yazdani-Pedram, R. Quijada and H. Aguilar- Bolados acknowledge financial support from ANID through grant FONDECYT projects N◦1191566 and 1191642. R. Verdejo and M. A. Lopez-Manchado acknowledge the financial support from the MICI (grant number MAT2016-81138-R). Javier Carretero Gonz ́alez ac-knowledges the Ramon y Cajal Fellow (RYC-2015-17722) from the MICI. The authors also thank Alejandro May-Pat for performing the AFM analysis. F. Avil ́es acknowledges the CONACYT infrastructure project N◦268595 for acquiring the AFM., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Measuring self-healing in epoxy matrices: The need for standard conditions

  • Peñas-Caballero, Mónica
  • Hernández, Marianella
  • Verdejo, Raquel
  • López-Manchado, Miguel A.
Self-healing polymers are currently receiving widespread attention as a strategy to extend the product's lifetime. Thermosetting polymers, particularly epoxies, are the most studied materials due to their uses as coatings, adhesives, or structural elements, among others. Scarcely noticed studies have reported the inherent healing capacity in arrested cracks of unmodified epoxy resins. Here, we present that healing can also occur in non-arrested cracks and its mechanism is a combination of an already described physical phenomenon and a chemical phenomenon, due to the formation of reversible hydrogen bonds. Here, we exemplify the need for fixing a set of standard testing conditions and propose they require complete and non-arrested cracks to do so., This research was funded by the Agencia Estatal de la Investigación, grant number PID2019-107501RB-I00 and MAT2016-81138-R. Mónica Peñas-Caballero thanks a Predoctoral contract (BES-2017-079899), and M. Hernández Santana for a Ramón y Cajal contract (RYC-2017-22837), Peer reviewed