Pasar al contenido principal

CAUCHO NITRILO AUTORREPARABLE PARA APLICACIONES RESISTENTES A LA ABRASION

PID2019-107501RB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2019
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 23
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

An effective and sustainable approach for achieving self-healing in nitrile rubber

  • Utrera-Barrios, Saúl
  • Araujo-Morera, Javier
  • Pulido de Los Reyes, L.
  • Verdugo Manzanares, Reyes
  • Verdejo, Raquel
  • López-Manchado, Miguel A.
  • Hernández, Marianella
Nitrile rubber is considered the workhorse of the automotive rubber industry, thanks to its chemical resistance and mechanical performance. However, applications such as hoses, seals or gaskets are prone to damage, limiting their lifetime. In this work, carboxylated nitrile rubber (XNBR) was ionically crosslinked with zinc oxide (ZnO), forming ionic domains grouped into ionic clusters. These clusters have the advantage of being reversible under the application of an external stimulus such as temperature, conferring the material a certain self-healing capability and enabling a lifecycle extension. Ground tire rubber selectively modified by grafting of poly(acrylic acid) (gGTR), was added to XNBR-ZnO compounds with the aim of improving the healing properties of the rubber matrix. The incorporation of acid groups contributed to the formation of additional ionic clusters during the crosslinking process, resulting in a notorious increase in healing efficiency from 15% for the XNBR-ZnO to 70% for the XNBR-ZnO-gGTR compound. Chemical and mechanical resistance were also evaluated, showing that the addition of a waste material like gGTR keeps mechanical strength suitable for many applications; meanwhile, it does not deteriorate its resistance to aliphatic solvents such as motor oil and gasoline. These promising results open the path for developing sustainable rubber products with extended lifetime and applicable within the automotive industry., The authors acknowledge the Ministry of Science, Innovation and Universities of Spain for a research contract (PID2019-107501RB-I00) and M. Hernández Santana for a Ramón y Cajal contract (RYC-2017- 22837). S. Utrera-Barrios acknowledges the Spanish National Research Council (CSIC) for a predoctoral contract (PIE-202060E183). Reyes Verdugo Manzanares acknowledges the Community of Madrid for a research assistant contract (PEJ-2019-AI/IND-1635). All the authors also acknowledge Arlanxeo and Signus Ecovalor for kindly providing the XNBR and ground tire rubber, respectivel, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

La autorreparación: estrategia clave en el modelo de economía circular de los neumáticos

  • Araujo-Morera, Javier
  • Verdejo, Raquel
  • López-Manchado, Miguel A.
  • Hernández, Marianella
El modelo de economía circular (EC) tiene como objetivo alargar la vida útil de los recursos mediante su uso racional y eficiente, con el fin de generar valor de forma repetida, reduciendo costes y residuos. Los principios de la EC (Rediseñar, Renovar, Reducir, Reutilizar, Reparar, Recuperar y Reciclar) pueden aplicarse a los neumáticos durante todo su ciclo de vida, que abarca desde el proceso de producción hasta la etapa de post-consumo. Dentro del contexto de Reparar, la autorreparación, cuyo objetivo es recuperar propiedades después de sufrir un daño, sigue siendo una tecnología incipiente en cuanto a neumáticos se refiere. Sin embargo, los esfuerzos actuales llevados a cabo por la industria y por el sector académico sin duda conducirán a la mejora y desarrollo de una sociedad donde la movilidad sea realmente sostenible gracias a la aplicación de la estrategia de autorreparación., Los autores agradecen al Ministerio de Ciencia e Innovación del Gobierno de España por la financiación recibida a través del contrato (PID2019-107501RB-I00) y MHS por un contrato Ramón y Cajal (RYC-2017-22837)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Neumáticos fuera de uso: una carga sostenible para el desarrollo de nuevos elastómeros con capacidad autorreparadora

  • Utrera-Barrios, Saúl
  • Pulido de Los Reyes, L.
  • Verdugo Manzanares, Reyes
  • Araujo-Morera, Javier
  • Verdejo, Raquel
  • Hernández, Marianella
La revalorización de los residuos plásticos, y en concreto de los residuos de neumáticos, supone generar un nuevo ciclo de vida útil a estos materiales reduciendo así la generación de desechos. Dicha revalorización ha supuesto, generalmente, el desarrollo de materiales de bajo valor añadido y poco atractivos comercialmente. En este trabajo, por el contrario, se busca aportar un alto valor añadido a dichos residuos mediante su empleo en elastómeros inteligentes con capacidad autorreparadora. La funcionalización e incorporación de polvo de neumático fuera de uso (GTR) ha permitido aumentar la capacidad de reparación de un caucho nitrilo carboxilado de un 20 a un 70% mediante la formación de entrecruzamientos iónicos reversibles., Los autores agradecen al Ministerio de Ciencia, Innovación y Universidades del Gobierno de España por el contrato de investigación (Los autores agradecen al Ministerio de Ciencia, Innovación y Universidades del Gobierno de España por el contrato de investigación (PID2019-107501RB-I00), M. Hernández Santana por un contrato Ramón y Cajal (RYC2017-22837) y S. Utrera-Barrios por un contrato predoctoral (PIE-202060E183). R. Verdugo Manzanares agradece a la Comunidad de Madrid por un contrato como ayudante de investigación (PEJ 2019-AI/IND-1635). Los autores agradecen a Arlanxeo por proporcionar el XNBR y a Signus Ecovalor por el GTR.), M. Hernández Santana por un contrato Ramón y Cajal (RYC2017-22837) y S. Utrera-Barrios por un contrato predoctoral (PIE-202060E183). R. Verdugo Manzanares agradece a la Comunidad de Madrid por un contrato como ayudante de investigación (PEJ 2019-AI/IND-1635). Los autores agradecen a Arlanxeo por proporcionar el XNBR y a Signus Ecovalor por el GTR., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Sustainable mobility: The route of tires through the circular economy model

  • Araujo-Morera, Javier
  • Verdejo, Raquel
  • López-Manchado, Miguel A.
  • Hernández, Marianella
Until nowadays, the concept of the 3Rs (Reduce, Reuse, Recycle) has tried to develop responsible consumption habits. Nonetheless, the rise of ecological thinking has generated the appearance of four new Rs in addition to these basic 3Rs; the currently 7Rs (Reduce, Reuse, Recycle, Redesign, Renew, Repair and Recover) which refer to the actions necessary to achieve the change towards a circular economy (CE) model. This model aims at extending the lifetime of the resources through their rational and efficient use to generate value repeatedly, reducing costs and waste. In this review, we examine the route followed by tires from the CE perspective, analyzing end-of-life strategies that aim to improve the circular flow of tire rubber materials. We discuss the most relevant studies on the ‘‘7Rs” concepts applied to tires, comparing different scientific approaches, as well as their industrial and commercial implementation. We also illustrate the drawbacks and feasibility of each of the R-hierarchy strategies. From the early stages of production to the post-consumption step, the path that tires trail within this CE model evidences the commitment and efforts towards the development of effective management schemes for achieving a real sustainable mobility., The authors acknowledge the State Research Agency of Spain (AEI) for a research contract (PID2019-107501RB-I00) and M. Hernández Santana for a Ramón y Cajal contract (RYC-2017- 22837)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of terbium(III) species on the structure and physical properties of polyurethane (TPU)

  • Villagra, D.
  • Fuentealba, Pablo
  • Spodine, E.
  • Vega, A.
  • Costa de Santana, R.
  • Verdejo, Raquel
  • López-Manchado, Miguel A.
  • Aguilar-Bolados, H.
Herein, a study is presented, addressed to understand the influence of the terbium (III) species contained in a thermoplastic polyurethane (TPU) matrix. The studied terbium (III) species were terbium (III) nitrate, Tb(NO)·5HO, and a terbium (III) complex, [TbL (NO)](NO) (HO), where L is a macrocyclic ligand derived from 2,6-pyridinedicarboxyaldehyde and ethylenediamine. SEM-EDXS showed that in both films the terbium (III) species were homogeneously distributed in the polymer matrix. The film doped with the nitrate salt displayed different physical properties, in comparison to the pristine TPU and the film containing the terbium (III) complex. Both TPU/Tb films, exhibiting a green color emission, with a G/B ratio being temperature independent. By comparison of the emission of both films containing terbium (III) species, the TPU/Tb complex film presented a more intense luminescence due to the antenna effect. TPU doped with the nitrate salt showed weak emission, indicating the lack of sensitizing groups., H.A.B. and P.F. thank to the projects ANID FONDECYT Iniciación 11200437 and ANID FONDECYT Iniciación 11200919, respectively, for the financial support. E.S., A.V. and D.V. thank Financiamiento Basal, AFB 180001 Project (CEDENNA). E.S., A.V., D.V. and P.F. acknowledge financial support from FONDECYT 1200033 Project. The authors also acknowledge the support from Brazilian agencies, CNPq and FAPEG and the State Research Agency of Spain (AEI) for a research contract (PID2019-107501RB-I00), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Understanding the molecular dynamics of dual crosslinked networks by dielectric spectroscopy

  • Utrera-Barrios, Saúl
  • Verdugo Manzanares, Reyes
  • Araujo-Morera, Javier
  • González Tomé, Sergio
  • Verdejo, Raquel
  • López-Manchado, Miguel A.
  • Hernández, Marianella
The combination of vulcanizing agents is an adequate strategy to develop multiple networks that consolidate the best of different systems. In this research, sulfur (S), and zinc oxide (ZnO) were combined as vulcanizing agents in a matrix of carboxylated nitrile rubber (XNBR). The resulting dual network improved the abrasion resistance of up to ~15% compared to a pure ionically crosslinked network, and up to ~115% compared to a pure sulfur-based covalent network. Addition-ally, the already good chemical resistance of XNBR in non-polar fluids, such as toluene and gasoline, was further improved with a reduction of up to ~26% of the solvent uptake. A comprehensive study of the molecular dynamics was performed by means of broadband dielectric spectroscopy (BDS) to complete the existing knowledge on dual networks in XNBR. Such analysis showed that the synergistic behavior that prevails over purely ionic vulcanization networks is related to the restricted motions of rubber chain segments, as well as of the trapped chains within the ionic clusters that converts the vulcanizate into a stiffer and less solvent-penetrable material, improving abrasion resistance and chemical resistance, respectively. This combined network strategy will enable the production of elastomeric materials with improved performance and properties on demand., This research was funded by the State Research Agency of Spain (AEI), Grant No. PID2019-107501RB-I00 and RYC-2017-22837; the Spanish National Research Council, Grant No. PIE-202060E183; the Community of Madrid, Grant No. PEJ-2019-AI/IND-1635 and the Ministry of Economy, Industry and Competitiveness, Grant No. PEJ2018-002334-A
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Use of novel non-toxic bismuth catalyst for the preparation of flexible polyurethane foam

  • El Khezraji, Said
  • Thakur, Suman
  • Raihane, M.
  • López-Manchado, Miguel A.
  • Belachemi, L.
  • Verdejo, Raquel
  • Lahcini, M.
Foam products are one of the largest markets for polyurethane (PU) and are heavily used in many sectors. However, current PU formulations use highly toxic and environmentally unfriendly production processes. Meanwhile, the increasing environmental concerns and regulations are intensifying the research into green and non-toxic products. In this study, we synthesized flexible polyurethane foam (PUF) using different weight percentages (0.025%, 0.05% and 0.1%) of a non-toxic bismuth catalyst. The bismuth-catalyzed foams presented a well evolved cellular structure with an open cell morphology. The properties of the bismuth-catalyzed flexible PUF, such as the mechanical, morphological, kinetic and thermal behaviors, were optimized and compared with a conventional tin-catalyzed PUF. The bismuth-catalyst revealed a higher isocyanate conversion efficiency than the stannous octoate catalyst. When comparing samples with similar densities, the bismuth-catalyzed foams present better mechanical behavior than the tin-catalyzed sample with similar thermal stability. The high solubility of bismuth triflate in water, together with its high Lewis acidity, have been shown to benefit the production of PU foams., This research was funded by the State Research Agency of Spain (AEI) through grant PID2019-107501RB-I00
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Unravelling the effect of healing conditions and vulcanizing additives on the healing performance of rubber networks

  • Araujo-Morera, Javier
  • López-Manchado, Miguel A.
  • Verdejo, Raquel
  • Hernández, Marianella
Self-healing rubbers have steadily been growing during the last decades. Various strategies have been studied to transform the vulcanized rubber into a reversible cross-linked network with multiple repair cycles. However, a detailed description on how the chemical constituents of a rubber formulation affect the healing properties of the vulcanizate is unknown and has not been reported until now. In this research, the individual effects of both the curing agent (sulfur and peroxide) and the activating complex (zinc oxide and stearic acid) have been assessed on the healing capability of a styrene-butadiene rubber (SBR) compound. The analysis of different healing conditions revealed that pristine materials should be subjected to the same thermal treatment as the healed samples to obtain scientifically sound values of the healing efficiency. Results also showed that each component affected the healing at different time scales, with the activating complex being responsible for the initial physical healing stage. Meanwhile, sulfur would act at later stages as dynamic healing moiety, enabling disulfide exchange reactions. In conclusion, the mechanical recovery of a rubber network can be potentially tailored depending on the relation between the chemical components of the rubber formulation., he authors acknowledge the State Research Agency of Spain (AEI) for a research contract (PID2019-107501RB-I00) and M. Hernández Santana for a Ramón y Cajal contract (RYC-2017-22837), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The Final Frontier of Sustainable Materials: Current Developments in Self-Healing Elastomers

  • Utrera-Barrios, Saúl
  • Verdejo, Raquel
  • López-Manchado, Miguel A.
  • Hernández, Marianella
It is impossible to describe the recent progress of our society without considering the role of polymers; however, for a broad audience, “polymer” is usually related to environmental pollution. The poor disposal and management of polymeric waste has led to an important environmental crisis, and, within polymers, plastics have attracted bad press despite being easily reprocessable. Nonetheless, there is a group of polymeric materials that is particularly more complex to reprocess, rubbers. These macromolecules are formed by irreversible crosslinked networks that give them their characteristic elastic behavior, but at the same time avoid their reprocessing. Conferring them a self-healing capacity stands out as a decisive approach for overcoming this limitation. By this mean, rubbers would be able to repair or restore their damage automatically, autonomously, or by applying an external stimulus, increasing their lifetime, and making them compatible with the circular economy model. Spain is a reference country in the implementation of this strategy in rubbery materials, achieving successful self-healable elastomers with high healing efficiency and outstanding mechanical performance. This article presents an exhaustive summary of the developments reported in the previous 10 years, which demonstrates that this property is the last frontier in search of truly sustainable materials., This research was funded by the State Research Agency of Spain (AEI), grant numbers PID2019-107501RB-I00 and RYC-2017-22837, and by the Spanish National Research Council (CSIC), grant number PIE-202060E183.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

SELF-HEALING STRATEGIES IN RUBBER COMPOSITES

  • Utrera-Barrios, Saúl
  • Araujo-Morera, Javier
  • Verdugo Manzanares, Reyes
  • Verdejo, Raquel
  • López-Manchado, Miguel A.
  • Hernández, Marianella
Inspired by some of the mechanisms that occur in nature, self-healing materials are characterized by the ability to recover, partially or totally, their initial properties after suffering damage. These materials constitute an efficient alternative for extending the lifecycle of products, as well as for reducing the amount of waste generated. At the same time, they reduce maintenance and repair costs. In this work, examples of recent developments in the field of elastomeric composite materials are presented, studying different matrices, natural rubber (NR), epoxidized natural rubber (ENR), styrene-butadiene rubber (SBR) and nitrile rubber (NBR), and using diverse repair strategies, hydrogen bonds, disulfide exchange reactions, Diels-Alder chemistry and ionic interactions. The effect of adding carbon-derived reinforcing fillers (graphene oxide) and sustainable alternative fillers (ground tire rubber) is also analyzed. It is studied how the presence and type of filler influences the healing capacity of elastomeric matrices, reaching repair efficiencies of up to ~80%, without detriment to their mechanical performance., Los autores agradecen a la Agencia Estatal de Investigación (AEI) por la financiación otorgada (PID2019-107501RB-I00, RYC- 2017-22837); al Consejo Superior de Investigaciones Científicas (CSIC) (PIE-202060E183); y a la Comunidad de Madrid (PEJ 2019- AI/IND-1635)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Development of Sustainable, Mechanically Strong, and Self-Healing Bio-Thermoplastic Elastomers Reinforced with Alginates

  • Utrera-Barrios, Saúl
  • Ricciardi, Ornella
  • González Tomé, Sergio
  • Verdejo, Raquel
  • López-Manchado, Miguel A.
  • Hernández, Marianella
New bio-thermoplastic elastomer composites with self-healing capacities based on epoxidized natural rubber and polycaprolactone blends reinforced with alginates were developed. This group of salts act as natural reinforcing fillers, increasing the tensile strength of the unfilled rubber from 5.6 MPa to 11.5 MPa without affecting the elongation at break (~1000% strain). In addition, the presence of ionic interactions and hydrogen bonds between the components provides the material with a thermally assisted self-healing capacity, as it is able to restore its catastrophic damages and recover diverse mechanical properties up to ~100%. With the results of this research, an important and definitive step is planned toward the circularity of elastomeric materials., This research was funded by the State Research Agency of Spain (AEI), grant numbers PID2019-107501RB-I00/AEI/10.13039/501100011033 and RYC-2017-2283, and the Spanish National Research Council, grant numbers LINKA20325 and PIE-202060E183., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Solving the Dichotomy between Self-Healing and Mechanical Properties in Rubber Composites by Combining Reinforcing and Sustainable Fillers

  • Araujo-Morera, Javier
  • Utrera-Barrios, Saúl
  • Doral Olivares, R.
  • Verdugo Manzanares, Reyes
  • López-Manchado, Miguel A.
  • Verdejo, Raquel
  • Hernández, Marianella
The dichotomy between mechanical performance and repairability is a well-known fact in the self-healing field. One alternative to overcome this trade-off is the inclusion of reinforcing fillers. In this research, hybrid reinforced self-healing styrene-butadiene rubber (SBR) composites are developed by combining mechano-chemically modified ground tire rubber (mGTR) with carbon black (CB). The SBR matrix is systematically analyzed by means of dynamic mechanical analysis and broadband dielectric spectroscopy. The SBR composite reinforced with 20 phr mGTR and 20 phr CB maintains the healing efficiency of the unfilled SBR (80%) and improves its tensile strength by 300%, balancing perfectly well both properties. The healing efficiency is determined at different damage levels. The damage at the microscopic scale is easier to recover and does not depend on the presence of fillers, while the recovery at the macroscopic level clearly relies on the addition of filler, with more demanding healing conditions., This work was supported by the State Research Agency of Spain (AEI) [grant numbers PID2019-107501RB-I00, RYC-2017-22837]; the Spanish National Research Council (CSIC) [grant number PIE-202060E183]; and the Community of Madrid [grant number PEJ 2019-AI/IND-14635].
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Poly(methyl methacrylate) as Healing Agent for Carbon Fibre Reinforced Epoxy Composites

  • Peñas-Caballero, Mónica
  • Chemello, Enrico
  • Grande, Antonio M.
  • Hernández, Marianella
  • Verdejo, Raquel
  • López-Manchado, Miguel A.
Self-healing materials offer a potential solution to the problem of damage to fibre-reinforced plastics (FRPs) by allowing for the in-service repair of composite materials at a lower cost, in less time, and with improved mechanical properties compared to traditional repair methods. This study investigates for the first time the use of poly(methyl methacrylate) (PMMA) as a self-healing agent in FRPs and evaluates its effectiveness both when blended with the matrix and when applied as a coating to carbon fibres. The self-healing properties of the material are evaluated using double cantilever beam (DCB) tests for up to three healing cycles. The blending strategy does not impart a healing capacity to the FRP due to its discrete and confined morphology; meanwhile, coating the fibres with the PMMA results in healing efficiencies of up to 53% in terms of fracture toughness recovery. This efficiency remains constant, with a slight decrease over three subsequent healing cycles. It has been demonstrated that spray coating is a simple and scalable method of incorporating a thermoplastic agent into an FRP. This study also compares the healing efficiency of specimens with and without a transesterification catalyst and finds that the catalyst does not increase the healing efficiency, but it does improve the interlaminar properties of the material., This research was funded by the State Research Agency of Spain (AEI), under grant number PID2019-107501RB-I00/AEI/10.13039/501100011033, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Corrosion control by autonomous self-healing epoxy coatings based on superabsorbent healing agents

  • Peñas-Caballero, Mónica
  • Martín Cordón, Jesús
  • Barranco, Violeta
  • Galván Sierra, Juan Carlos
  • Hernández, Marianella
  • López-Manchado, Miguel A.
  • Verdejo, Raquel
Metallic corrosion is an all-time dangerous and extremely expensive problem. Here, we present an autonomous self-healing polymer coating based on an epoxy resin and superabsorbent polymer (SAP) blend as an anticorrosion coating. Tailor-made coatings were manufactured by controlling the location of the SAP on the surface, middle, and bottom of the coating. The corrosion behavior and self-healing process of the coatings were analyzed at the macro, micro, and sub-micro scales using Electrochemical Impedance Spectroscopy (EIS). The SAP preferentially located at the bottom showed coating resistance values higher than 1 × 10 Ωcm over 10 days of immersion with 3-point defects. This configuration provided the best anticorrosion performance, preventing coating delamination, and protecting the metal from corrosion after surface damage, indicating better barrier properties. The SAP enabled local repair of the crack when in contact with water, minimizing the diffusion of oxygen and electroactive species, which are responsible for the corrosion of a metal., This research was funded by the Spanish Research Agency, grant numbers PID2019-107501RB-I00/AEI/10.13039/501100011033, and RYC-2017-22837. MPC acknowledges grant BES-2017-079899 funded by MCIN/AEI/10.13039/501100011033. VB would like to acknowledge financial support through the PID2019-104717RB-I00 project from the Spanish Ministry of Science and Innovation (MICI), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Poly(ethylene-co-methacrylic acid) coated carbon fiber for self-healing composites

  • Peñas-Caballero, Mónica
  • Chemello, Enrico
  • Grande, Antonio M.
  • Hernández, Marianella
  • Verdejo, Raquel
  • López-Manchado, Miguel A.
We describe a simple and scalable method for incorporating thermoplastic agents into fiber reinforced polymers (FRPs). Poly(ethylene-co-methacrylic acid) (EMAA) nanoparticles were successfully deposited on the surface of carbon fibers via spray coating. EMAA was finely distributed and exhibited strong adhesion to the fibers. The EMAA-coated carbon fibers improved the fracture toughness and provided the FRPs with self-healing ability. The resulting healing efficiency, based on the recovery of the interlaminar fracture toughness, was above 40 % and gradually decreased after three repair cycles. The repair mechanism of the system involves the inherent flow capacity of the thermoplastic and formation of interfacial bridging between the two damaged interphases. This methodology allows pure resin to be used without any chemical modification or adverse effects on its viscosity, and the coated fiber can be stored until use., This research was funded by the Spanish Research Agency, grant numbers PID2019-107501RB-I00/AEI/10.13039/501100011033 and RYC-2017-22837. Monica ´ Penas-Caballero ˜ thanks a Predoctoral contract (BES-2017-079899, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Self-Healing Elastomers: A sustainable solution for automotive applications

  • Utrera-Barrios, Saúl
  • Verdejo, Raquel
  • López-Manchado, Miguel A.
  • Hernández, Marianella
Among the most fruitful material-industry relationships is that of rubber and the automotive industry. Tires, seals, gaskets, hoses, tubes, soft, and damping parts are common applications in an industry that consumes more than 75 % of world rubber production. However, this relationship faces significant challenges. The difficulty of reprocessing rubbers due to their irreversible crosslinked network that ensures thermal stability, mechanical robustness and chemical resistance, makes them incompatible with the Circular Economy model. Numerous efforts are coordinated daily to overcome the Linear Economy model and achieve more environmentally friendly rubbers. Strategies like devulcanization, recycling, and self-healing are already being considered by several researchers and industries. Thanks to self-healing, a tire will be able to seal damage due to punctures or cracks. Thanks to self-healing, materials will be able to live longer and thus have an extended lifetime. This review delves into the key concepts of self-healing in the most commonly used elastomeric matrices in the automotive industry. While a more application-oriented approach is still necessary, the first steps have been taken towards future scalability in the sector. By analyzing the state-of-the-art taking into consideration the nature of the elastomeric matrix (natural or synthetic), as well as the different healing mechanisms (extrinsic, intrinsic and combinations), the chemistry behind them, and the mechanical performance, this review highlights the potential transformative impact of these concepts to revolutionize the industry and pave the way for a more sustainable future., The authors acknowledge the State Research Agency of Spain (AEI) for research funding (PID2019-107501RB-I00/AEI/10.13039/ 501100011033) and M. Hernandez ´ Santana for a Ramon ´ y Cajal contract (RYC-2017-22837). S. Utrera-Barrios acknowledges the Spanish National Research Council (CSIC) for a predoctoral contract (PIE202060E183). The authors would like to thank the PTI + SusPlast from CSIC for their support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Life cycle assessment applied to a self-healing elastomer filled with ground tire rubber

  • Alonso Pastor, L. E.
  • Nuñez Carrero, K. C.
  • González, M.
  • Araujo-Morera, J.
  • Peters, G.
  • Pastor, J. M.
  • Hernández, Marianella
In this study, we present the first life cycle assessment (LCA) of a self-healing styrene-butadiene rubber (SBR) used in the production of marine fenders. Results show that a rubber with healing capabilities is not environmentally attractive if it cannot last for the same lifetime as a conventional product due to its lower mechanical performance and higher energy consumption. To overcome these constraints, we added a sustainable filler, ground tire rubber, which improved the mechanical properties of the self-healing SBR (x6 increase in tensile strength). Although this addition involved additional sub-processes, the additional environmental impacts were outweighed by the benefits achieved through improved material performance (28% decrease in global warming potential - GWP and 26% in primary energy demand - PED). This study used primary data on experimental healing efficiencies and healing cycles rather than conservative assumptions, which provides a more representative and trustworthy LCA of self-healing rubbers. Our findings have significant implications for the rubber industry, as self-healing rubbers offer a promising avenue for reducing the environmental impact of synthetic materials., The authors are grateful to the Spanish Research Agency (AEI) for the financial support (PID2019-107501RB-I00/AEI/10.13039/ 501100011033) and to the Spanish National Research Council (CSIC) for the funding (LINKA20325). Authors also acknowledges the Univer- sity of Valladolid for the Postdoctoral Contract CONVOCATORIA 2020 (K.C.N.C), the Spanish Research Agency (AEI) for a Ramón y Cajal contract (RYC-2017-22837) (M.H.S.) and PRE2018-084732 (L.E.A.P.). Finally, the authors would also like to thank the Recovery and Resilience Mechanism Funds -Next Generation EU Funds- and the Community of Castilla y León Funds. Complementary Research and Development Plans with the Autonomous Communities in R&D&I actions, of the Compo- nent 17. Investment 1., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Evolution of self-healing elastomers, from extrinsic to combined intrinsic mechanisms: a review

  • Utrera-Barrios, Saul
  • Verdejo, Raquel
  • López-Manchado, Miguel A.
  • Hernández, Marianella
The evolution of self-healing polymers has resulted in a myriad of healing designs that have given way to complex systems capable of supporting multiple cycles, among other features. This progression enables us to propose the implementation of a timeline that classifies self-healing polymers in generations based on the healing mechanism, and correlated with historical development. The first generation employed the encapsulation of external healing agents; the second one, based on intrinsic mechanisms, applied reversible chemistries; and the third generation was inspired by natural examples such as plants and human skin, in which the healing agent is embedded in vascular networks. Despite great efforts and, with a few exceptions, polymers with high healing efficiency and high mechanical performance are not common. To improve this situation, a combination of different mechanisms is currently emerging, giving birth to the fourth generation of self-healing materials. This article, focused on self-healing elastomers, provides a rigorous overview of this new generation, in which the combination of covalent bonds and non-covalent interactions provides an optimal balance between mechanical performance and repairability. The implementation of this concept leads to materials with real commercial potential in functional applications, such as coatings, sensors, actuators, controlled release of drugs, seals, gaskets, hoses, and even high-performance applications such as tires and railway components., The authors acknowledge the Ministry of Science and Innova- tion of Spain for a research contracts (MAT2015-73392-JIN and PID2019-107501RB-I00) and M. Hernández Santana for a Ramón y Cajal contract (RYC-2017-22837), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

New recyclable and self-healing elastomer composites using waste from toner cartridges

  • Utrera-Barrios, Saúl
  • Martinez, M. F.
  • Mas-Giner, I.
  • Verdejo, Raquel
  • López-Manchado, Miguel A.
  • Hernández, Marianella
Product recycling reintroduces what is discarded as waste and minimizes the environmental impact on our society. Among the different types of waste from electrical and electronic equipment, toner recycling often falls short, downcycling plastic components. This study introduces an innovative approach in which waste parts from toner cartridges are valorized to develop (recyclable and) self-healing elastomeric composite materials. The synergy between carboxylated nitrile rubber (XNBR) as the elastomeric phase and high-impact poly (styrene) (HIPS) as the thermoplastic phase derived from toner cartridge waste was explored and optimized. This combination resulted in the creation of a thermoplastic elastomer exhibiting robust mechanical properties and self-healing capabilities with a tensile strength of 6.6 ± 0.2 MPa and a temperature-driven mechanical recovery of 100%. Furthermore, the capacity of toner powder, an integral component of waste, to act as a reinforcing filler was confirmed, with a 50% increase in mechanical strength compared with the unfilled composite. Moreover, an increase in toner content (up to 20 phr) resulted in an optimal balance between tensile strength and self-healing capacity, surpassing the traditional antagonism between these properties. As a result, this research opens a new pathway in the field of self-healing composites and suggests a practical and environmentally friendly approach for managing electronic waste, effectively supporting the principles of Circular Economy., he authors acknowledge the State Research Agency of Spain (AEI) for a research contract (PID2019-107501RB-I00/AEI/10.13039/ 501100011033) and M. Hernández Santana for a Ramón y Cajal con- tract (RYC-2017-22837). S. Utrera-Barrios acknowledges the Spanish National Research Council (CSIC) for a predoctoral contract (PIE- 202060E183). I. Mas-Giner acknowledges the Community of Madrid for a research assistant contract (PEJ-2021-AI/IND-21419). All authors acknowledge Arlanxeo for kindly providing XNBR and PTI + SusPlast from CSIC for their support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Unlocking the potential of self-healing and recyclable ionic elastomers for soft robotics applications

  • Utrera-Barrios, S.
  • Steenackers, N.
  • Terryn, S.
  • Ferrentino, P.
  • Verdejo, Raquel
  • Van Asche, G.
  • López-Manchado, Miguel A.
  • Brancart, J.
  • Hernández, Marianella
Celebrating 10 Years of Materials Horizons: 10th Anniversary Collection, In the field of soft robotics, current materials face challenges related to their load capacity, durability, and sustainability. Innova tive solutions are required to address these problems beyond conventional strategies, which often lack long-term ecological viability. This study aims to overcome these limitations using mechanically robust, self-healing, and recyclable ionic elastomers based on carboxylated nitrile rubber (XNBR). The designed materials exhibited excellent mechanical properties, including tensile strengths (TS) exceeding 19 MPa and remarkable deformability, with maximum elongations (EB) over 650%. Moreover, these materials showed high self-healing capabilities, with 100% recovery efficiency of TS and EB at 110 8C after 3 to 5 h, and full recyclability, preserving their mechanical performance even after three recycling cycles. Furthermore, they were also moldable and readily scalable. Tendon-driven soft robotic grippers were successfully developed out of ionic elastomers, illustrating the potential of self-healing and recyclability in the field of soft robotics to reduce maintenance costs, increase material durability, and improve sustainability., The authors acknowledge the State Research Agency of Spain (AEI) for the research contract (PID2019-107501RB-I00/AEI/ 10.13039/501100011033) and M. Hernández Santana for Ramón y Cajal contract (RYC-2017-22837). The authors acknowledge the Spanish National Research Council (CSIC) for the iLink+ contract (LINKA20325) and S. Utrera-Barrios for the predoctoral contract (PIE-202060E183). The authors acknow ledge the Fonds Wetenschappelijk Onderzoek (FWO) for the personal grants of S. Terryn (1100416N) and J. Brancart (12E1123N). All authors also acknowledge Arlanxeo for kindly providing XNBR and the PTI+ SusPlast from CSIC for their support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

New insights into the molecular structure and dynamics of a recyclable and ionically crosslinked carboxylated nitrile rubber (XNBR)

  • Utrera-Barrios, Saul
  • Verdugo Manzanares, Reyes
  • Grande, Antonio Mattia
  • Verdejo, Raquel
  • López-Manchado, Miguel Ángel
  • Hernández, Marianella
Ionic crosslinking offers a route to rubber reprocessability due to ion pairs’ dynamism, with recent studies focusing on tensile properties recovery. However, this research aims to provide, for the first time, a comprehensive overview of the recyclability of carboxylated nitrile rubber (XNBR), spotlighting changes in molecular dynamics through multiple recycling cycles beyond tensile tests. A uniquely recyclable XNBR, incorporating ZnO as a multifunctional additive, was designed alongside a simple, scalable, two-step recycling process. Evidence of the delicate balance between crosslink density and molecular entanglements that affects the dynamics of the recycled material was found. Recycling also restricts the molecular dynamics near ionic domains; attributed to a higher crosslink density (from 3.69×10<sup>-5</sup> mol cm<sup>−3</sup> in the pristine sample to 6.00×10<sup>-5</sup> mol cm<sup>−3</sup> after the third cycle), caused by a decreased ionic clusters size (aggregation number drops from 12.2 to 6.9). Remarkably, negligible differences (<10%) in compressive fatigue behavior and an enhanced chemical resistance in different solvents (up to 350% increase in motor oil) were also observed, ensuring suitable performance in conditions closer to service. Overall, this study demonstrates the feasibility of XNBR recycling and provides a broad understanding of this material at the molecular level., The authors acknowledge the State Research Agency of Spain (AEI) for a research contract (PID2019-107501RB-I00/AEI/10.13039/ 501100011033) and M. Hernández Santana for a Ramón y Cajal contract (RYC-2017-22837). S. Utrera-Barrios acknowledges the Spanish National Research Council (CSIC) for a predoctoral contract (PIE- 202060E183). R. Verdugo Manzanares acknowledges the Community of Madrid for a research assistant contract (PEJ-2019-AI/IND-1635). All authors also acknowledge Arlanxeo for kindly providing XNBR and PTI +SusPlast from CSIC for their support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Measuring self-healing in epoxy matrices: The need for standard conditions

  • Peñas-Caballero, Mónica
  • Hernández, Marianella
  • Verdejo, Raquel
  • López-Manchado, Miguel A.
Self-healing polymers are currently receiving widespread attention as a strategy to extend the product's lifetime. Thermosetting polymers, particularly epoxies, are the most studied materials due to their uses as coatings, adhesives, or structural elements, among others. Scarcely noticed studies have reported the inherent healing capacity in arrested cracks of unmodified epoxy resins. Here, we present that healing can also occur in non-arrested cracks and its mechanism is a combination of an already described physical phenomenon and a chemical phenomenon, due to the formation of reversible hydrogen bonds. Here, we exemplify the need for fixing a set of standard testing conditions and propose they require complete and non-arrested cracks to do so., This research was funded by the Agencia Estatal de la Investigación, grant number PID2019-107501RB-I00 and MAT2016-81138-R. Mónica Peñas-Caballero thanks a Predoctoral contract (BES-2017-079899), and M. Hernández Santana for a Ramón y Cajal contract (RYC-2017-22837), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Polymer blends as an effective strategy to designing self-healing epoxy resin

  • Peñas-Caballero, Mónica
  • Hernández, Marianella
  • Verdejo, Raquel
  • López-Manchado, Miguel A.
The role of miscibility in the design of self-healing thermosets remains debated. While miscibility is often associated with better dispersion and mechanical reinforcement, effective healing requires not only phase integration but also thermoplastic mobility and interfacial reactivity. This study critically examines that assumption by comparing two thermoplastic agents, poly(ethylene-co-methacrylic acid) (EMAA), an immiscible but chemically reactive copolymer, and poly(methyl methacrylate) (PMMA), a partially miscible yet inert polymer, blended into epoxy systems. Using thermal analysis, spectroscopy, and mechanical testing, we assess each system’s ability to recover mechanical performance following catastrophic fracture. PMMA, despite its homogeneous dispersion and minimal disruption to matrix stiffness, failed to promote healing due to its limited mobility and lack of interfacial reactivity. In contrast, EMAA enabled up to 45 % recovery in tensile strength through a combination of melt flow and covalent bond formation at the interface, as evidenced by in-situ FTIR. These findings demonstrate that miscibility alone does not determine healing capability. Instead, effective repair depends on a thermoplastic’s ability to mobilize under thermal stimulus and chemically interact with the matrix. This work provides a functional framework for designing self-healing thermoset systems based on reactivity and mobility rather than miscibility alone., This research was funded by the Spanish Research Agency, grant numbers PID2019-107501RB-I00/AEI/10.13039/501100011033., Peer reviewed