Pasar al contenido principal

NUEVOS MATERIALES NANOESTRUCTURADOS DE CARBON PARA APLICACIONES MEDIOAMBIENTALES

MAT2016-80285-P

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D (Excelencia / Generación de Conocimiento)
Año convocatoria 2016
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE ALICANTE

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Well-defined meso/macroporous materials as a host structure for methane hydrate formation: Organic versus carbon xerogels

  • Cuadrado-Collados, C.
  • Farrando-Pérez, Judit
  • Martínez-Escandell, M.
  • Ramírez Montoya, Luis Adrián
  • Menéndez Díaz, José Ángel
  • Arenillas de la Puente, Ana
  • Montes Morán, Miguel Ángel
  • Silvestre-Albero, J.
A series of xerogels with a properly designed porous structure and surface chemistry have been synthesized and evaluated as a host structure to promote the nucleation and growth of methane hydrates. Organic xerogels (OGs) have been synthesized from resorcinol-formaldehyde mixtures using a sol-gel approach and microwave heating. These xerogels are hydrophilic in nature and possess designed meso/macrocavities in the pore size range 5–55 nm. Carbon xerogels (CGs) have been synthesized from their organic counterparts after a carbonization treatment at high temperature. Interestingly, the carbonization process does not alter/modify substantially the porous network of the parent xerogels, while developing new micropores. Under water-supplying conditions, the two types of xerogels exhibit a large improvement in the methane adsorption capacity compared to the pure physisorption process taking place in dry conditions (up to 200% improvement), and associated with a significant hysteresis loop. These excellent values must be associated with the promoting effect of these xerogels in the water-to-hydrate conversion process. The comparison of OGs and CGs as a host structure anticipates that surface chemistry, total pore volume and pore size are critical parameters defining the extent and yield of the methane hydrate formation process., Authors would like to acknowledge financial support from the MINECO (projects MAT2016-80285-p and CTQ2017-87820-R). Principado de Asturias-FICYT-FEDER (Project PCTI-Asturias IDI/2018/000118) is also acknowledged. L.A. Ramírez-Montoya thanks CONACyT, México, for a post-doctoral grant (CVU No 330625, 2017)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Micropore Filling and Multilayer Formation in Stöber Spheres upon Water Adsorption

  • Gallego-Gómez, Francisco
  • Farrando-Pérez, Judit
  • López, Cefe
  • Silvestre-Albero, Joaquín
The presence of porosity critically affects the performance of solid systems. The pore accessibility to adsorbate molecules and the corresponding adsorption/desorption behavior are crucial aspects to understand the properties of porous materials but are difficult to address, principally when dealing with narrow micropores. A prominent example is colloidal silica (Stöber) spheres whose microporosity, inaccessible for some adsorbates, can be readily filled by water molecules to a large extent but exhibiting a complex adsorption behavior with unexpected hystereses. Here, we perform water adsorption isotherms on Stöber spheres at different temperatures using an original analysis of the Dubinin-Radushkevich representation to examine both the accessibility to the microporosity and the formation of water multilayers on the outer sphere surface. The micropore filling (and emptying) is found to be limited by the kinetic energy of the water molecules, causing low-pressure hysteresis. We further discover that the (temperature-dependent) completion of the micropore filling delays the onset of multilayer adsorption, leading to hysteresis at a high relative pressure. The number of adsorbed water layers is determined, and the adsorption-induced swelling of the spheres is discussed., This work was funded by Spanish MINECO projects MAT2014-58731-JIN and MAT2016-80285-p, and Spanish MCIU project RTI2018-093921-B-C41.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Structural deterioration of well‐faceted MOFs upon H2S exposure and its effect in the adsorption performance

  • Reljic, Snezana
  • Broto-Ribas, Anna
  • Cuadrado‐Collados, Carlos
  • Jardim, Erika O.
  • Maspoch, Daniel
  • Imaz, Inhar
  • Silvestre‐Albero, Joaquín
The structural deterioration of archetypical, well‐faceted metal–organic frameworks (MOFs) has been evaluated upon exposure to an acidic environment (H2S). Experimental results show that the structural damage highly depends on the nature of the hybrid network (e.g., softness of the metal ions, hydrophilic properties, among others) and the crystallographic orientation of the exposed facets. Microscopy images show that HKUST‐1 with well‐defined octahedral (111) facets is completely deteriorated, ZIF‐8 with preferentially exposed (110) facets exhibits a large external deterioration with the development of holes or cavities in the mesoporous range, whereas UiO‐66‐NH2 with (111) exposed facets, and PCN‐250 with (100) facets does not reflect any sign of surface damage. Despite the selectivity in the external deterioration, X‐ray diffraction and gas adsorption measurements confirm that indeed all MOFs suffer an important internal deterioration, these effects being more severe for MOFs based on softer cations (e.g., Cu‐based HKUST‐1 and Fe‐based PCN‐250). These structural changes have inevitable important effects in the final adsorption performance for CO2 and CH4 at low and high pressures., JSA would like to acknowledge financial support from the MINECO (Project MAT2016‐80285‐p). I.I. and D.M. would like to acknowledge financial support from the Spanish MINECO (Project RTI2018‐095622‐B‐100), and Catalan AGAUR (Project 2017 SGR 238), the ERC, under the EU‐FP7 (ERC‐Co 615954) and the CERCA Program/Generalitat de Catalunya. ICN2 is supported by the Severo Ochoa Program from the Spanish MINECO (Grant No. SEV‐2017‐0706)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Guaiacol hydrotreatment in an integrated APR-HDO process: Exploring the promoting effect of platinum on Ni–Pt catalysts and assessing methanol and glycerol as hydrogen sources

  • Jin, W.
  • Gándara-Loe,J.
  • Pastor-Pérez, L.
  • Villora-Picó, J. J.
  • Sepúlveda-Escribano, A.
  • Rinaldi, R.
  • Ramírez-Reina, Tomás
This study presents an integrated approach combining aqueous phase reforming (APR) and hydrodeoxygenation (HDO) for the hydrotreatment of guaiacol, a model compound representing lignin-derived phenols in pyrolysis bio-oils. The APR process enables in-situ H2 generation, eliminating the need for an external hydrogen source. We examine the interplay between metal species, the Pt-promoting effect on Ni–Pt catalyst supported on activated carbon (AC), and the choice of hydrogen source (methanol or glycerol). Amongst the monometallic catalysts, a 1% Pt/AC catalyst notably achieved over 96% guaiacol conversion at 300 °C with either hydrogen source. Interestingly, when 0.5–1% of the Ni loading is replaced with Pt, the resulting bimetallic Ni–Pt/AC catalysts demonstrate a significant improvement in guaiacol conversion, reaching 70% when methanol is employed as the hydrogen source. Surprisingly, no comparable enhancement in guaiacol conversion is observed when employing glycerol as the hydrogen source. This observation underlines one of the pivotal effects of the hydrogen source on catalyst performance. X-ray photoemission spectroscopy (XPS) pinpointed strong Ni–Pt interactions in the catalyst. It also revealed distinctive electronic features of Ni–Pt/AC, which are favourable for steering selectivity towards cyclohexanol rather than phenol when Pt loading is increased from 0.5 to 1%. Moreover, Pt enhanced catalyst stability by inhibiting the oxidation of Ni sites and mitigating Ni–Pt phase sintering. Overall, our findings offer important insights into integrating APR and HDO processes, the promotion effect of Pt, and the importance of hydrogen source selection in terms of guaiacol conversion and catalyst stability., Financial support for this work was provided by the Department of Chemical and Process Engineering at the University of Surrey and the EPSRC grant EP/R512904/1 as well as the Royal Society Research Grant RSGR1180353. Authors would also like to acknowledge Spanish Ministry of Science and Innovation through the projects MAT2016-80285-P, RYC2018-024387-I, JC2019-040560-I. RR acknowledges the financial support provided by the ERC Consolidator Grant (LIGNINFIRST, project number 725762). This work was also partially funded by the University W. Jin et al. Renewable Energy 215 (2023) 118907 11 of Seville via the VI PPIT grant scheme for talented researchers and the Junta de Andalucia PAIDI2020 programme through the CLEVER-BIO project P20_0066, Peer reviewed
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Structural deterioration of well-faceted MOFs upon H2S exposure and its effect in the adsorption performance

  • Reljic, Snezana
  • Broto-Ribas, Anna|||0000-0002-9672-4526
  • Cuadrado, Carlos|||0000-0002-4938-2228
  • Jardim, Erika|||0000-0001-6000-4925
  • Maspoch, Daniel|||0000-0003-1325-9161
  • Imaz, Inhar|||0000-0002-0278-1141
  • Silvestre-Albero, Joaquin|||0000-0002-0303-0817
The structural deterioration of archetypical, well-faceted metal-organic frameworks (MOFs) has been evaluated upon exposure to an acidic environment (HS). Experimental results show that the structural damage highly depends on the nature of the hybrid network (e.g., softness of the metal ions, hydrophilic properties, among others) and the crystallographic orientation of the exposed facets. Microscopy images show that HKUST-1 with well-defined octahedral (111) facets is completely deteriorated, ZIF-8 with preferentially exposed (110) facets exhibits a large external deterioration with the development of holes or cavities in the mesoporous range, whereas UiO-66-NH with (111) exposed facets, and PCN-250 with (100) facets does not reflect any sign of surface damage. Despite the selectivity in the external deterioration, X-ray diffraction and gas adsorption measurements confirm that indeed all MOFs suffer an important internal deterioration, these effects being more severe for MOFs based on softer cations (e.g., Cu-based HKUST-1 and Fe-based PCN-250). These structural changes have inevitable important effects in the final adsorption performance for CO and CH at low and high pressures.