Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 11
Encontrada(s) 1 página(s)

Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Twisted One-Dimensional Charge Transfer and Related Y-Shaped Chromophores with a 4 H-Pyranylidene Donor: Synthesis and Optical Properties

  • Tejeda-Orusco, V.
  • Andreu, R.
  • Orduna, J.
  • Villacampa, B.
  • Franco, S.
  • Civera, A.
Three series of push-pull derivatives bearing 4H-pyranylidene as electron donor group and a variety of acceptors were designed. On one hand, one-dimensional chromophores with a thiophene ring (series 1H) or 5-dimethylaminothiophene moiety (series 1N) as an auxiliary donor, non-coplanar with the p-conjugated system, were synthesized. On the other hand, related two-dimensional (2D) Y-shaped chromophores (series 2) were also prepared to compare how the diverse architectures affect the electrochemical, linear, and second-order nonlinear optical (NLO) properties. The presence of the 5-dimethylaminothiophene moiety in the exocyclic C= C bond of the pyranylidene unit gives rise to oxidation potentials rarely low, and the protonation (with an excess of trifluoroacetic acid) of its derivatives results in the apparition of a new blue-shifted band in the UV-visible spectra. The analysis of the properties of derivatives with and without the additional thiophene ring shows that this auxiliary donor leads to a higher NLO response, accompanied by an enhanced transparency. Y-shaped chromophores of series 2 present a blue-shifted absorption, higher molar extinction coefficients, and higher Eox values compared to their linear twisted counterparts. As concerns NLO properties, 2D Y-shaped architecture gives rise to somewhat lower µß values (except for thiobarbiturate derivatives).
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

V-shaped pyranylidene/triphenylamine-based chromophores with enhanced photophysical, electrochemical and nonlinear optical properties

  • Gámez-Valenzuela S.
  • Neusser D.
  • Benitez-Martin C.
  • Najera F.
  • Guadix J.A.
  • Moreno-Yruela C.
  • Villacampa B.
  • Ponce Ortiz R.
  • Ludwigs S.
  • Andreu R.
  • Ruiz Delgado M.C.
We report the synthesis and comprehensive study of two chromophores based on 4H-pyranylidene moiety as a part of the p-conjugated spacer. Triphenylamine (TPA) acts as donor and tricarbonitrile-based electron-accepting groups complete these V-shaped D-A-D architectures (A, acceptor; D, donor). Their electrochemical, photophysical and nonlinear optical properties are analyzed in detail by using a joint experimental and theoretical approach. The two chromophores exhibit near-infrared fluorescence, large Stokes shift, enhanced emission in tetrahydrofuran/water mixtures and good photostability. Additionally, the dimerization of triphenylamine groups to tetraphenylbenzidine (TPB) takes place upon electrochemical and chemical oxidation showing their peculiar electrochemical behavior and film formation capabilities. Interestingly, high molecular first hyperpolarizabilities and two-photon absorption cross-sections were found, highlighting their potential applications in electro-optical devices. Overall, our work demonstrates that these near-infrared (NIR) fluorescent chromophores are versatile materials with a myriad of applications ranging from optoelectronics to biological applications. © 2021 The Royal Society of Chemistry.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Pyranylidene/trifluoromethylbenzoic acid-based chromophores for dye-sensitized solar cells

  • Royo Sánchez, R.
  • Domínguez Celorrio, A.
  • Franco Ontaneda, S.
  • Andreu Solano, R.
  • Orduna, J.
The synthesis and photovoltaic study of five dyes based on 4H-pyranylidene moiety as donor moiety is reported. A thiophene unit conjugated with/without an ethynyl bond acts as the p-relay and benzoic acid as the anchor group with/without a trifluoromethyl group. Their electrochemical and optical properties are analyzed by using a joint experimental and theoretical approach. The presence of the trifluoromethyl group leads to an enhancement of the molar extinction coefficient, being slightly when a hexyl chain is introduced in the thiophene ring, but does not modify the oxidation potential. For the preparation of derived solar cells an antiaggregant is essential in all cases. The photovoltaic performance is sensitive to the structural modification of the dye: the CF3 group and the hexyl chain of the thiophene spacer were shown to improve the efficiency. The lack of a triple bond in the p-spacer involves a lower photovoltaic efficiency, and the trifluoromethyl group leads to a lower dye-load, but a decrease of the recombination processes. These results are in accordance with the electrochemistry impedance spectroscopy studies carried out. Moreover, the organic dyes have been also tested with a fluorescent lamp (indoor conditions), leading to an increase of the efficiency, reaching a 36% for the best dye. © 2022 The Authors
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Stability of a pyrimidine-based dye-sensitized TiO2 photoanode in sacrificial electrolytes

  • Ansón-Casaos, A.
  • Martínez-Barón, C.
  • Angoy-Benabarre, S.
  • Hernández-Ferrer, J.
  • Benito, A.M.
  • Maser, W.K.
  • Blesa, M.J.
Dye sensitization of semiconductor metal oxides aims to extend the light absorption range into the visible region, of particular interest for their use as photoanodes in photoelectrochemical (PEC) water splitting. Organic dyes, however, suffer from limited chemical stability when they are exposed to constant potential and irradiation in aqueous media. Thus, in this work, we evaluate a novel metal-free donor-π-acceptor (D-π-A) dye (AT-Pyri), demonstrating significant sensitization of film photoanodes based on TiO2 nanoparticles. Among a series of tested sacrificial agents, the addition of triethanolamine (TEOA) to the sodium sulphate electrolyte prevents the degradation of AT-Pyri even after several hours of operation. Combining two sacrificial agents (methanol and TEOA) results in a synergetic improvement of the PEC water-splitting activity. Notably, the stabilization of the AT-Pyri photoanode is accompanied by a substantial increase in the photocurrent over the reference TiO2 photoanode, while the associated spikes in transient photocurrent measurements disappear.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

The effect of sintering temperature on the properties of the BiOCl films for potential application in DSSC

  • Pizarro-Castillo, L.
  • Mera, Adriana C.
  • Cabello-Guzmán, G.
  • Bernal, C.
  • Bizarro, M.
  • Carrasco, C.
  • Blesa, María-Jesús
  • Rodríguez, C.A.
In this work, BiOCl films were obtained by tape casting using BiOCl powders synthesized by the co-precipitation method. The effect of the film's sintering temperature (300 °C–600 °C) on the morphology, chemical composition, crystalline phases and optical characteristics was studied. The obtained BiOCl powders showed a flake-like morphology, a tetragonal crystalline structure without secondary phases and a wide band gap of 3.53 eV. For BiOCl films, results indicated that as the sintering temperature increased the flake-like shaped particles changed to rectangular ones while the amount of chlorine in the films decreased. A phase transition from tetragonal BiOCl to monoclinic Bi24O31Cl10 was also observed as the sintering temperature increased. Consequently, optical studies revealed that the band gap of BiOCl films decreased from 3.03 eV to 2.82 eV. FTIR analysis demonstrated that the organic groups were removed from the films only for sintering temperatures above 400 °C. The Rhodamine B dye adsorption capacity of BiOCl films decreased with increasing sintering temperature. The results obtained allow us to conclude that BiOCl films are suitable for use in DSSC when the sintering temperature is in the range of 400–500 °C.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Highly Efficient Photoninitiators Based on 4H-Pyranylidene Derivatives for Two-Photon Laser Printing

  • Royo, Raquel
  • Mainik, Philipp
  • Benitez-Martin, Carlos
  • Andreu, Raquel
  • Blasco, Eva
  • Najera, Francisco
  • Villacampa, Belén
A series of four donor–acceptor–donor derivatives bearing 4H-pyranylidene and 4-methylcyclohexan-1-one units as donor and acceptor groups respectively is designed, synthesized, and photophysically characterized. Both experimental and theoretical studies reveal good two-photon absorption (2PA) properties for these systems. Decoration of the exocyclic position of the 4H-pyranylidene moiety with a thiophene ring results in high 2PA cross-section values (σ2PA) ≈700 nm, and remarkably, in the region between 900 and 1000 nm. Furthermore, all chromophores are evaluated as photoinitiators (PIs) for two-photon-laser printing at 780 nm, showing superior performance compared to the commonly used commercially available PI, phenylbis(2,4,6-trimethylbenzoyl)phosphine oxide. Among the studied PIs, the ones equipped with a thiophene unit at the exocyclic position of the 4H-pyranylidene moiety exhibit the highest efficiency, enabling fast printing using low laser powers with even lower concentrations of PI. Overall, this study shows the great potential of this new class of PIs for application in the field of 3D nanoprinting.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Novel spiro-core dopant-free hole transporting material for planar inverted Perovskite solar cells

  • Royo, Raquel
  • Sánchez, José G.
  • Li, Wenhui
  • Martinez-Ferrero, Eugenia
  • Palomares, Emilio
  • Andreu, Raquel
  • Franco, Santiago
Hole-transporting materials (HTMs) have demonstrated their crucial role in promoting charge extraction, interface recombination, and device stability in perovskite solar cells (PSCs). Herein, we present the synthesis of a novel dopant-free spiro-type fluorine core-based HTM with four ethoxytriisopropylsilane groups (Syl-SC) for inverted planar perovskite solar cells (iPSCs). The thickness of the Syl-SC influences the performance of iPSCs. The best-performing iPSC is achieved with a 0.8 mg/mL Syl-SC solution (ca. 15 nm thick) and exhibits a power conversion efficiency (PCE) of 15.77%, with Jsc = 20.00 mA/cm2, Voc = 1.006 V, and FF = 80.10%. As compared to devices based on PEDOT:PSS, the iPSCs based on Syl-SC exhibit a higher Voc, leading to a higher PCE. Additionally, it has been found that Syl-SC can more effectively suppress charge interfacial recombination in comparison to PEDOT:PSS, which results in an improvement in fill factor. Therefore, Syl-SC, a facilely processed and efficient hole-transporting material, presents a promising cost-effective alternative for inverted perovskite solar cells.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Modelling TiO2 photoanodes for PEC water splitting: Decoupling the influence of intrinsic material properties and film thickness

  • Ansón-Casaos, A.
  • Ciria, J.C.
  • Martínez Barón, C.
  • Villacampa, B.
  • Benito, A.M.
  • Maser, W.K.
Semiconductor metal oxides are intensively studied in electrodes for photoelectrochemical (PEC) water splitting. On a series of nanoparticulate TiO2 photoanodes, we analyze specific fabrication variables by means of data fitting. First, the experimental outcome is gathered using PEC characterization techniques, mostly cyclic voltammetry and transient photocurrent measurements. Subsequently, we apply models to gain insights into the involved charge trapping and transfer phenomena. We find that capacitance coefficients and the switch-on transient kinetics depend on the TiO2 layer thickness, respectively indicating surface mechanisms and stationary regimes that are mediated by light accessibility. On the contrary, exponential factors of capacitance are independent of thickness, but reflect changes in the density of electron states with different sintering atmospheres. Also, the transfer resistance in the electrolyte side is indirectly influenced by sintering. Through meticulous quantitative analysis of trends, we stablish simple mathematical relationships that connect thickness-dependent parameters. This knowledge delves into fundamental mechanisms governing the TiO2 photoelectrode behaviour, and aims to facilitate further improvements in the efficiency of materials and electrodes for green hydrogen production.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Enhancing the temporal stability of DSSCs with novel vinylpyrimidine anchoring and accepting group

  • Duerto, I.
  • Sarasa, S.
  • Barrios, D.
  • Orduna, J.
  • Villacampa, B.
  • Blesa, M. -J
Three compounds based on aniline, thiophene and vinylpyrimidine as anchoring group have been prepared and studied as light harvesting units for dye-sensitized solar cells (DSSCs). They comprise thiophenyl p-spacer systems with one or two thiophenes (AT-Pyri, ATT-Pyri) and aniline as donor which is functionalized, in one case, with an hydroxyl group (HO-AT-Pyri). The bithiophene based dye (ATT-Pyri) shows higher extinction coefficients and smaller transition energy, as well as broader absorption spectrum. Thus, despite lower dye uptake, devices based on one thiophene and with the hydroxyl group (HO-AT-Pyri) have slightly higher power conversion efficiencies (¿) as compared with the analogous dye without this group (AT-Pyri). However, the best performing device is based on the dye with bithiophene bridge (ATT-Pyri) when a co-adsorbent is added to avoid the aggregation of the dye. The photovoltaic parameters of cells based on these vinylpyrimidine dyes are enhanced over 1000 h, especially for ATT-Pyri devices, which reach a ¿ = 6, 4%. © 2022 The Authors
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Waterborne graphene-and nanocellulose-based inks for functional conductive films and 3d structures

  • González-Domínguez J.M.
  • Baigorri A.
  • Álvarez-Sánchez M.Á.
  • Colom E.
  • Villacampa B.
  • Ansón-Casaos A.
  • García-Bordejé E.
  • Benito A.M.
  • Maser W.K.
In the vast field of conductive inks, graphene-based nanomaterials, including chemical derivatives such as graphene oxide as well as carbon nanotubes, offer important advantages as per their excellent physical properties. However, inks filled with carbon nanostructures are usually based on toxic and contaminating organic solvents or surfactants, posing serious health and environmental risks. Water is the most desirable medium for any envisioned application, thus, in this context, nanocellulose, an emerging nanomaterial, enables the dispersion of carbon nanomaterials in aqueous media within a sustainable and environmentally friendly scenario. In this work, we present the development of water-based inks made of a ternary system (graphene oxide, carbon nanotubes and nanocellulose) employing an autoclave method. Upon controlling the experimental variables, low-viscosity inks, high-viscosity pastes or self-standing hydrogels can be obtained in a tailored way. The resulting inks and pastes are further processed by spray-or rod-coating technologies into conductive films, and the hydrogels can be turned into aerogels by freeze-drying. The film properties, with respect to electrical surface resistance, surface morphology and robustness, present favorable opportunities as metal-free conductive layers in liquid-phase processed electronic device structures.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Optimizing electron injection in D-A'-π-a dye sensitized solar cells: The role of electrolyte modification

  • Duerto, Isolda
  • Orduna, Jesús
  • Villacampa, Belén
  • Blesa, María-Jesús
This study establishes a theoretical and technical pathway, based on electroanalytical methods, for an optimized design of DSSCs with balanced short-circuit current density (Jsc) and open-circuit voltage parameters (Voc). In this paper, isoindigo (iI) and benzothiadiazole (BTZ) are included as auxiliary acceptors in A-iI-Ph-SIL and A-BTZ-Ph-SIL dyes, respectively. The strength of auxiliary acceptors greatly influences the thermodynamic parameters governing the electron transfer process, as well as the proper distribution of electron density in orbitals. Theoretical calculations reveal that the isoindigo unit, in A-iI-Ph-SIL, exhibits a strong acceptor character that hinders charge transfer from the donor to the primary acceptor. However, in the A-BTZ-Ph-SIL, the moderate acceptor character of the benzothiadiazole unit allows charge movement across the molecule. Voltammetric analyses indicate that, in A-iI-Ph-SIL, the electron injection into the semiconductor is compromised because its excited state energy level is too close to the TiO2 conduction band edge. This fact limits the necessary driving force for efficient injection process. To overcome this, the influence of the iodide/triiodide electrolyte composition on the electrochemical properties is explored. A concentration of 0.1 M tert-butylpyridine yields the optimal efficiency in these devices. This particular concentration strikes the right balance between Jsc and Voc. Notably, this optimized concentration led to a significant 44 % improvement in DSSC efficiency compared to the conventional 0.5 M tert-butylpyridine concentration, achieving a maximum efficiency of 4.79 %. Electrochemical Impedance Spectroscopy indicates that better conversion efficiencies of the devices are linked to a high charge transfer resistance at the TiO₂/solvent interface.