Pasar al contenido principal

DESARROLLO DE UN SISTEMA INTEGRAL PARA LA ELIMINACION DE LOS CONTAMINANTES GENERADOS POR LOS NUEVOS MOTORES A GASOLINA ALTAMENTE EFICIENTES

PID2019-105542RB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2019
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE ALICANTE

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Exploring the potential of copper-based catalysts for use IN CO OXIDATION reactions IN OXY-FUEL combustion engines

  • Díaz-Verde, A.
  • Martínez-Munuera, J. C.
  • García-García, A.
  • Sanchis, Enrique José|||0000-0002-6856-8992
  • Piqueras, P.|||0000-0002-3767-0839
[EN] Copper/ceria-zirconia (Cu/Ce0.8Zr0.2O2) and copper/perovskite (Cu/BaMnO3) based catalysts have emerged as potential materials to be included in the formulation of oxidation catalysts for automotive applications, due to their tuneable redox properties, their high oxygen storage capacity and a favourable interaction between CuO and the corresponding supports. In this work, these formulations have been synthesised and tested as catalysts for CO oxidation reactions in different oxy-fuel combustion exhaust conditions. Their catalytic performances were compared with those obtained under conventional combustion conditions. The results showed that the copper/ ceria-zirconia catalysts exhibited better catalytic performances than the perovskite-based ones in both exhaust conditions, which also promoted a high resistance to inhibition by the presence of CO2. Furthermore, Cu(6 %)/Ce0.8Zr0.2O2 exhibited the best catalytic performance in all the cases studied, showing an even better behaviour than the noble metal reference Pt(1 %)/Al2O3 under selected boundary conditions lambda = 1., This study was funded by the Spanish Agencia Estatal de Investigacion (MCIN/AEI/10.13039/501100011033) and by European Union NextGenerationEU/PRTR through Grants PDC2021-120821-I00 and PID2019-105542RB-I00 and by Generalitat Valenciana (PROMETEO CIPROM/2021/070 project) . The authors acknowledge Veronica Torregrosa-Rivero for supplying the perovskite-based catalyst and some of its characterization data.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Electrical conduction mechanism in carbon-ceramic composites

  • Alcañiz Monge, Juan
  • Gil-Muñoz, Gema
  • Trautwein, Guido
  • Reinoso, Santiago
Carbon-ceramic composites (C/Cer) have been prepared by chemical vapor deposition of coal tar pitch onto clay substrates and characterized by thermogravimetric analyses, powder X-ray diffraction, Raman spectroscopy, and scanning and transmission electron microscopies (SEM and TEM). The study of the dc electrical conductivity, together with the determination of the Hall voltage sign, proves that such C/Cer composites are n-type semiconductors. Our results demonstrate that: 1) the mechanism of electrical conduction of C/Cer semiconductors proceeds through the pathways expected for amorphous solids (ie. variable-range hopping and heat-activated pathways at low and high temperatures, respectively); and 2) their transport properties are strongly dependent on the clay components, as evidenced by microscopy experiments., The authors would like to thank the financial support from Ministerio de Ciencia e Innovación (grant No. PID2019-105542RB-I00/AEI/10.13039/501100011033 ), the European Union (FEDER Funds), and Generalitat Valenciana (grant No. PROMETEO CIPROM/2021/70 ).
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Unraveling the nature of active sites onto copper/ceria-zirconia catalysts for low temperature CO oxidation

  • Martínez-Munuera, J.C.
  • Serrano-Martínez, V.M.
  • Giménez-Mañogil, J.
  • Yeste Siguenza, María del Pilar
  • García-García, A.
The aim of this research is an attempt to shed some light on the understanding of the nature of the active sites and the generated synergies in the copper/ceria-zirconia formulations for low temperature CO oxidation by means of the creation of copper entities with different physico-chemical nature. For this reason, several CuOx/ceria-zirconia catalysts, with different Cu contents and different methods to incorporate copper species, were synthesized. Focus was specially put in this case trying to link the results of CO oxidation catalytic tests with the CO-temperature programmed reduction profiles/approximate estimations and selected characterization parameters in order to find out correlations among catalysts' properties/reducibility and catalytic behaviors, especially those corresponding to the nature and roles of the different CuOx species in contact with ceria-based support on catalytic activity. Results reveal a significant improvement in CO conversion compared to the ceria-zirconia support by adding a small amount of copper loading (as low as 0.5 %), emphasizing the paramount role of copper incorporated by the method of IWI. From 0.5 up to 2% of copper loading, an interesting increase gradual trend in activity and reducibility can be noted. It should be mentioned that all the catalysts obtained by this procedure are more catalytically active towards CO oxidation than 1%Pt/Al2O3 at low temperatures (T < 130 degrees C). CO-TPR results show that the reducibility of these catalysts is in line with their CO oxidation activity. The method of preparation has been revealed as a critical variable in the catalytic performance, and quite similar catalytic activities can be reached from different synthesis methods and different copper contents, due to the similar nature and type of CuOx species generated over the catalysts' surface, identified by the CO-TPR profiles and the rest of characterization data. Finally, IWI method seems to be the best one among those tested, thus combining superior areas of both alpha and beta contributions assigned on CO-TPR profiles, which seem to be critical in the interpretation of the catalytic behaviors.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

NO Oxidation on Lanthanum-Doped Ceria Nanoparticles with Controlled Morphology

  • Fernández García, Susana
  • Tinoco, Miguel
  • Hungría Hernández, Ana Belén
  • Chen, Xiaowei
  • Calvino Gámez, José Juan
  • Martínez Munuera, Juan Carlos
  • Giménez Mañogil, Javier
  • García García, Avelina
The present work aims to assess the impact of morphology and reducibility on lanthanum-doped ceria nanocatalysts with controlled morphology on the NO oxidation reaction. Specifically, samples were prepared using a hydrothermal method incorporating lanthanum at varying molar concentrations (0, 5, 10, and 15 mol.%) into ceria with a controlled morphology (nanocubes and nanorods). The structural, compositional, and redox characterization of these catalysts has been performed via scanning transmission electron microscopy (STEM), X-ray diffraction (XRD), X-ray energy dispersive spectroscopy (X-EDS), inductively coupled plasma (ICP), hydrogen temperature-programmed reduction (H2-TPR), and oxygen storage capacity (OSC). NO oxidation catalytic tests were conducted, and the results were compared with estimated curves (obtained by considering the proportions of the corresponding components), which revealed the presence of a synergistic effect between lanthanum and ceria. The degree of enhancement was found to depend on both the morphology and the amount of lanthanum incorporated into CeO2. These findings may facilitate the optimization of features concerning ceria-based nanocatalysts for the removal of NOx emissions from exhaust gases., 16 páginas
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

CO oxidation under lean and stoichiometric conditions over ceria-zirconia with very low metal contents (Cu, Co, Ag and Pt)

  • Martínez Munuera, Juan Carlos
  • Yeste Siguenza, María del Pilar
  • García García, A.
In this work, several ceria-zirconia based catalysts with very low (and equimolar) metal contents were prepared, characterised and tested for the CO oxidation reaction (under lean and stoichiometric conditions), trying to emulate those conditions found in a diesel oxidation catalyst (DOC) system from a diesel engine and those encountered under gasoline exhaust (l ¼ 1). The metals chosen are Cu, Co, Ag and Pt (as a reliable benchmark). The results reveal enormous differences among reducibility and catalytic activity despite quite similar structural and textural properties of the catalysts, showing differences among dispersion (Ag-catalyst seems to present a low level of dispersion). This catalyst seems to be characterised, as well, by a strong electronic interaction between Ce and Ag centres which is suggested to yield an improved reducibility under H2-TPR conditions. Nevertheless, the order in catalytic activity (Cu > Ag > Co zPt>>support) seems not to follow the order found in reducibility and the Cu-catalyst seems to be the most active independently on the reaction conditions, yielding nearly overlapped CO oxidation catalytic curves. Interestingly, a strong correlation between the catalytic activity under the two conditions tested and the OSC values of the Ce0.8Zr0.2O2-supported metal catalysts is found. Therefore, OSC parameter measured at 150 C can be used as a relevant descriptor to evaluate the CO oxidation activity at low and medium conversions for the investigated catalysts, much better than the H2-TPR measurements.