Pasar al contenido principal

NUEVAS TECNOLOGIAS DE ARRAY DE ANTENAS Y PROCESADO DIGITAL PARA LOS FUTUROS SISTEMAS INTEGRADOS RADIO DE ONDAS MILIMETRICAS TERRESTRES Y ESPACIALES

PID2020-112545RB-C51

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2020
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD POLITECNICA DE MADRID

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Robust design of 3D-printed W-band bandpass filters using gap waveguide technology

  • Santiago Arriazu, David
  • Tamayo-Domínguez, Adrián
  • Gómez Laso, Miguel Ángel
  • Lopetegui Beregaña, José María
  • Fernández-González, José Manuel
  • Martínez, Ramón
  • Arregui Padilla, Iván
In this paper, a W-band 3D-printed bandpass filter is proposed. The use of higher-order TE10n modes in groove gap waveguide (GGW) technology is evaluated in order to alleviate the manufacturing requirements. In addition to the use of higher-order modes, the coupling between them is analyzed in detail to improve the overall fabrication robustness of the component. This allows the implementation of narrow-band filters operating at millimeter-wave frequency bands (or above), which usually demand complex manufacturing techniques to provide the high accuracy required for this kind of devices. In order to show the applicability of the proposed method, a narrow-band 5th-order Chebyshev bandpass filter centered at 94 GHz, which can be easily fabricated by state-of-the-art stereolithographic (SLA) 3D-printing techniques followed by silver coating, is shown. Excellent measured performance has been obtained., Open Access funding provided by Universidad Pública de Navarra. This work was funded by the Spanish Ministerio de Ciencia e Innovación –Agencia Estatal de Investigación (MCIN/AEI/1010.13039/501100011033) under Projects TEC2017-85529-C3-1-R and TEC2017-85529-C3-2-R (co-funded by FEDER “A way to make Europe”) and Projects PID2020-112545RB-C51 and PID2020-112545RB-C53.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Robust filter design built in a contactless metallic multilayer waveguide at W-band

  • Garcia-Martinez, Sergio (0000-0002-2427-8264)
  • Santiago Arriazu, David
  • Tamayo-Domínguez, Adrián
  • Sánchez-Olivares, Pablo
  • Arregui Padilla, Iván
  • Lopetegui Beregaña, José María
  • Gómez Laso, Miguel Ángel
  • Fernández-González, José Manuel
This article presents the design and experimental validation of a W-band waveguide cavity filter operating around 91 GHz, using a periodic electromagnetic bandgap (EBG) structure with glide symmetry to implement the filter in a stack of multiple thin metallic sheets without electric contact between them. The filter is based on vertically stacked cavities that use the TE103 mode, which offers increased robustness to manufacturing and assembly errors due to the large dimensions of the cavity. The glide-symmetric circular hole EBG structure is analyzed and integrated to suppress unwanted field leakage between the metallic layers with a broad stopband. The proposed filter maintains effective operation in the 88–94-GHz frequency range, even with gap variations between layers of up to 20 µm. The filter is fabricated using laser cutting, achieving a low surface roughness and high dimensional accuracy. Experimental measurements show excellent agreement with the simulations, with a return loss greater than 20 dB and an insertion loss below 0.5 dB. These results demonstrate the possibility to achieve high performance filters at millimeter-wave frequencies while maintaining low fabrication complexity and cost using the multilayer waveguide technology., This work was supported in part by Spanish Government, Ministerio de Ciencia, Innovación y Universidades, through the Projects New Array Antenna Technologies and Digital Processing for the Future Integrated Terrestrial and Space-Based Millimeter Wave Radio Systems UPM-InTerSpaCE under Grant PID2020-112545RB-C51; in part by the Filters and Passive Components for Future Integrated Terrestrial and Space-based Millimeter Wave Radio Systems UPNA-InTerSpaCE under Grant PID2020-112545RB-C53; and in part by the Sub-Terahertz Antenna Technologies for Communications In the Road to 6G UPM -STAIRto6G funded by MICIU/AEI/10.13039/501100011033 and FEDER, UE, under Grant PID2023-151385OA-I00. The work of Sergio Garcia-Martinez was supported by the Universidad Politécnica de Madrid, Programa Propio.