Pasar al contenido principal

SISTEMAS Y TECNOLOGIAS RADIO PARA COMUNICACIONES TERRESTRES Y ESPACIALES DE GRAN CAPACIDAD EN UN FUTURO HIPERCONECTADO

TEC2017-85529-C3-1-R

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2017
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD POLITECNICA DE MADRID

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

A wideband radio channel sounder for non-stationary channels: design, implementation and testing

  • Lopez Valcarcel, Luis Antonio
  • García Sánchez, Manuel
The increasing bandwidths and frequencies proposed for new mobile communications give rise to new challenges for system designers. Channel sounding and channel characterization are important tasks to provide useful information for the design of systems, protocols, and techniques to fight the propagation impairments. In this paper, we present a novel radio channel sounder capable of dealing with non-stationary channels. It can be operated in real-time and has a compact size to ease transport. For versatility and cost purposes, the core of the system is implemented in Field Programmable Gate Arrays (FPGAs). Three measurement campaigns have been conducted to illustrate the performance of the sounder in both static and non-static channels. In its current configuration, the sounder reaches an RF null-to-null bandwidth of 1 GHz, providing a delay resolution of 2 ns, a maximum measurable Doppler shift of 7.63 kHz, and 4.29 s of continuous acquisition time. A comparison with other channel sounders in the literature reveals that our proposal achieves a good combination of performance, cost, and size., Xunta de Galicia | Ref. ED481A-2020/049, Xunta de Galicia | Ref. ED431C 2019/26, Agencia Estatal de Investigación | Ref. PID2020-112545RB-C52, Agencia Estatal de Investigación | Ref. TEC2017-85529-C3-3R
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Robust design of 3D-printed W-band bandpass filters using gap waveguide technology

  • Santiago Arriazu, David
  • Tamayo-Domínguez, Adrián
  • Gómez Laso, Miguel Ángel
  • Lopetegui Beregaña, José María
  • Fernández-González, José Manuel
  • Martínez, Ramón
  • Arregui Padilla, Iván
In this paper, a W-band 3D-printed bandpass filter is proposed. The use of higher-order TE10n modes in groove gap waveguide (GGW) technology is evaluated in order to alleviate the manufacturing requirements. In addition to the use of higher-order modes, the coupling between them is analyzed in detail to improve the overall fabrication robustness of the component. This allows the implementation of narrow-band filters operating at millimeter-wave frequency bands (or above), which usually demand complex manufacturing techniques to provide the high accuracy required for this kind of devices. In order to show the applicability of the proposed method, a narrow-band 5th-order Chebyshev bandpass filter centered at 94 GHz, which can be easily fabricated by state-of-the-art stereolithographic (SLA) 3D-printing techniques followed by silver coating, is shown. Excellent measured performance has been obtained., Open Access funding provided by Universidad Pública de Navarra. This work was funded by the Spanish Ministerio de Ciencia e Innovación –Agencia Estatal de Investigación (MCIN/AEI/1010.13039/501100011033) under Projects TEC2017-85529-C3-1-R and TEC2017-85529-C3-2-R (co-funded by FEDER “A way to make Europe”) and Projects PID2020-112545RB-C51 and PID2020-112545RB-C53.