Pasar al contenido principal

MEDIDA Y CARACTERIZACION DE CANAL DE RADIO PROPAGACION PARA EL FUTURO ECOSISTEMA DE COMUNICACIONES MAS ALLA DE 5G

PID2020-112545RB-C52

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2020
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE VIGO

Resultados relacionados

Resultados totales (Incluyendo duplicados): 14
Encontrada(s) 1 página(s)

Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Impact of Limiting PAPR in 5G Uplink When Channel Estimation Is Not Accurate

  • Torio Gomez, Pablo
  • García Sánchez, Manuel
  • Lopez Valcarcel, Luis Antonio
In 5G Massive Multiple Input Multiple Output systems, the base station has to deal with a huge amount of high dimension channel matrices in order to estimate the channel response in a short time. That is because, ideally, the channel should be estimated from the evaluation of a different channel matrix at every subcarrier. However, it is possible to save matrices by assigning several subcarriers to the same channel matrix, assuming that they will behave similarly, provided that the subcarriers’ aggregated bandwidth does not exceed the channel coherence bandwidth. On the other hand, reducing the peak-to-average power ratio (PAPR) is an important issue in 5G terminals. Clipping the signal is an easy way to deal with PAPR, but it also produces distortion. We present a study of the combined effects of these two distortions in order to determine to what extent they can be tolerated and to what extent the distortion produced by inaccurate channel estimation can mask the distortion generated by moderate clipping. The study is carried out by simulating different scenarios with varying coherence bandwidth, 5G numerology, the number of subcarriers included within each channel matrix, and limiting PAPR by applying several degrees of clipping, Xunta de Galicia | Ref. ED431C 2019/26, Xunta de Galicia | Ref. ED481A-2020/049, Agencia Estatal de Investigación | Ref. PID2020-112545RB-C52
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

A wideband radio channel sounder for non-stationary channels: design, implementation and testing

  • Lopez Valcarcel, Luis Antonio
  • García Sánchez, Manuel
The increasing bandwidths and frequencies proposed for new mobile communications give rise to new challenges for system designers. Channel sounding and channel characterization are important tasks to provide useful information for the design of systems, protocols, and techniques to fight the propagation impairments. In this paper, we present a novel radio channel sounder capable of dealing with non-stationary channels. It can be operated in real-time and has a compact size to ease transport. For versatility and cost purposes, the core of the system is implemented in Field Programmable Gate Arrays (FPGAs). Three measurement campaigns have been conducted to illustrate the performance of the sounder in both static and non-static channels. In its current configuration, the sounder reaches an RF null-to-null bandwidth of 1 GHz, providing a delay resolution of 2 ns, a maximum measurable Doppler shift of 7.63 kHz, and 4.29 s of continuous acquisition time. A comparison with other channel sounders in the literature reveals that our proposal achieves a good combination of performance, cost, and size., Xunta de Galicia | Ref. ED481A-2020/049, Xunta de Galicia | Ref. ED431C 2019/26, Agencia Estatal de Investigación | Ref. PID2020-112545RB-C52, Agencia Estatal de Investigación | Ref. TEC2017-85529-C3-3R
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Analysis of selective surfaces characterization using free-space technique

  • Expósito Pérez, Isabel
  • Reis, João R.
  • Viegas, Samuel
  • Caldeirinha, Rafael F.S.
  • Cuiñas Gómez, Íñigo
  • García Sánchez, Manuel
The free-space technique is the leading method for experimentally evaluating selective surfaces, including frequency selective surfaces (FSS), energy selective surfaces (ESS), or polarization selective surfaces (PSS). These surfaces selectively transmit or block electromagnetic waves based on specific frequencies, energy levels, or polarizations. This paper thoroughly analyzes the most recent experiments using the free-space technique, examining key elements such as surface holders, dimensions, measurement distances, scenario configurations, and the use of calibration/correction methods. Despite the absence of a standardized procedure or universally adopted guidelines, this study not only presents diverse measurement approaches from the literature but also offers practical insights for applying the free-space technique. Additionally, the paper details the steps for uncertainty budget calculation in these measurements and provides quantitative values for an actual SS measurement., Agencia Estatal de Investigación | Ref. PID2020-112545RB-C52
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Unsupervised detection of offending radio transmissions by means of a deep learning autoencoder

  • Torío Gómez, Pablo
  • García Sánchez, Manuel
  • Cuiñas Gómez, Íñigo
  • Santalla del Río, Maria Veronica
With the arrival of deep learning, it is possible for the authorities of each country to automate surveillance tasks in the use of the radio spectrum. We present a method for monitoring radio channels in time and frequency based on an autoencoder trained with sequences that are randomly generated as Rayleigh-distributed signals. A receiver with an omnidirectional antenna records electric field amplitude samples on a set of channels belonging to the terrestrial or maritime mobile service. The samples arefed into the autoencoder, generating a prediction. When the prediction differs greatly from the original samples, we infer that a radio emission has occurred. This method has been successfully used to detect unauthorized radio emissions., Xunta de Galicia | Ref. ED431C 2024/29, Agencia Estatal de Investigación | Ref. PID2020-112545RB-C52, Agencia Estatal de Investigación | Ref. TED2021-130056B-I00, Fondo Europeo de Desarrollo Regional
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Low-dimensional wideband channel descriptors for antenna-aware scenario classification at 28 GHz

  • Vázquez Alejos, Ana Maria
This letter investigates low-dimensional compact wideband channel descriptors for scenario classification at 27.5 28.5 GHz using omnidirectional, horn, and 1×8 beamformed measurements collected in three realistic environments: an empty room, a multipath-rich laboratory, and an outdoor corridor. A homogeneous processing chain is used to extract compact and physically interpretable descriptors from the measured channel responses. Principal component analysis reveals a low dimensional structure, while supervised learning achieves highly accurate three-scenario identification under grouped validation. The revised validation protocol controls class imbalance, receiver trajectory orientation, antenna observation mode, and spatially correlated samples. Position-grouped and spatial block-grouped validations achieve macro-F1 scores above 0.97 for SVM-RBF and Random Forest, confirming that the observed separability is not caused by antenna-level or spatial leakage. Antenna-specific ablations further show that the descriptors remain discriminative for omnidirectional, horn, and beamformed observations, although cross-antenna transfer is only partial. These findings support compact wideband descriptors as an effective low dimensional basis for measurement-based learning-oriented wireless channel characterization., Agencia Estatal de Investigación | Ref. PID2020-112545RB-C52, Universidade de Vigo/CISUG
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Dual-band single-layer fractal frequency selective surface for 5G applications

  • Decoster, Bram
  • Maes, Stephanie
  • Cuiñas Gómez, Íñigo
  • García Sánchez, Manuel
  • Caldeirinha, Rafael F. S.
  • Verhaevert, Jo
Due to the global growth in popularity of Fifth Generation (5G) cellular communications, the demand for shielding against it has risen for a variety of applications, mainly related to cybersecurity but also to isolation, calm areas and so on. This research paper aims to provide a suitable dual-band fractal FSS (Frequency Selective Surface) for the 5G lower band frequencies: 750 MHz and 3.5 GHz. The unit cell is in the shape of a bow tie, where each of the triangular parts are Sierpiński triangles. One major addition to the unit cell is a central metal strip to make the manufacturing of the FSS more feasible and to tune the operation frequencies and bandwidths. As with each different stage of a fractal antenna, the different stages of the fractal FSS design behave differently. For this application, stage 2 is sufficient, as we are able to cover frequency bands among those included in the FR1 5G spectrum. Some equations were derived using linear regression in order to provide specific design tools for building an FSS. These equations have high accuracy and can be used to adapt the proposed design to other frequencies. Some other parameters, which are not represented in the aforementioned equations, can also be adjusted for minor tweaking of the final design. This design performs well except under large incidence angles. This should be taken into account when proposing the installation of a structure based on it. A good agreement between simulation and measurement results is observed., Xunta de Galicia | Ref. ED431C 2019/26, Ministerio de Ciencia e Innovación | Ref. PID2020-112545RB-C52, Fundaçao para a Ciencia e Tecnologia | Ref. UIDB / EEA / 50008/2021
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Characterization, analysis, and modeling of the non-stationary V2I channel at 28-GHz on highways

  • Lopez Valcarcel, Luis Antonio
  • García Sánchez, Manuel
In this work, the 28 GHz V2I channel in highway scenarios is studied. For this purpose, we conducted measurement campaigns in two different settings and analyzed the results. We show how the propagation characteristics of these channels are highly dependent on the presence or absence of certain reflective elements in the environment. Consequently, we propose a very simple ray tracing model to analyze the multipath behavior of the channel. We also discuss the stationarity of the channel through the comparison of three state-of-the-art methods. Stationarity time values between 25 ms and 41 ms were obtained for a car moving slightly under the maximum allowed speed of 120 km/h. Taking stationarity into account, we computed the channel wideband parameters. Delay spread values of less than 10 ns were obtained when the link antennas were properly aligned. However, they can jump to more than 100 ns when a line-of-sight (LOS) component is not dominant due to the presence of discrete reflectors., Xunta de Galicia | Ref. ED431C-2024/29, Xunta de Galicia | Ref. ED481A-2020/049, European Regional Development Fund, Universidade de Vigo/CISUG, Agencia Estatal de Investigación | Ref. PID2020-112545RB-C52
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

An MTI-like approach for interference mitigation in FMCW radar systems

  • Lopez Valcarcel, Luis Antonio
  • García Sánchez, Manuel
  • Fioranelli, Francesco
  • Krasnov, Oleg A.
Mutual interference between automotive frequency-modulated continuous-wave (FMCW) radar systems has been a concern over recent years. Several interference mitigation (IM) techniques have been proposed to mitigate this phenomenon, which is deemed to grow in severity as more systems are deployed on the road. In this article, an inexpensive technique, based on well-known moving target indicator (MTI) processing, is proposed to separate interference from target signals. It exploits the contrast after stretch processing between uncorrelated FMCW interference (sparse and chirp-like) and beat signals (stable sinusoids). The interference is therefore marked and subtracted. This eliminates interference at the cost of introducing a distortion dependent on the relative radial velocity of the targets. To validate the proposed approach, called MTI-IM, numerical simulations and experiments with commercial-grade radars have been performed, with comparisons between MTI-IM and other IM techniques. Results show good capabilities to fight the uncorrelated interference coming from more than one interfering radar. This is achieved at reduced computational cost, which is a key limiting factor in automotive systems., Agencia Estatal de Investigación | Ref. PID2020-112545RB-C52, Xunta de Galicia | Ref. ED431C2019/26, Xunta de Galicia | Ref. ED481A-2020/049, Universidade de Vigo/CISUG
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Car bumper effects in ADAS sensors at automotive radar frequencies

  • Expósito Pérez, Isabel
  • Chin, Ingo
  • García Sánchez, Manuel
  • Cuiñas Gómez, Íñigo
  • Verhaevert, Jo
Radars in the W-band are being integrated into car bumpers for functionalities such as adaptive cruise control, collision avoidance, or lane-keeping. These Advanced Driving Assistance Systems (ADAS) enhance traffic security in coordination with Intelligent Transport Systems (ITS). This paper analyzes the attenuation effect that car bumpers cause on the signals passing through them. Using the free-space transmission technique inside an anechoic chamber, we measured the attenuation caused by car bumper samples with different material compositions. The results show level drops lower than 1.25 dB in all the samples analyzed. The signal attenuation triggered by the bumpers decreases with the frequency, with differences ranging from 0.55 dB to 0.86 dB when comparing the end frequencies within the radar band. Among the analyzed bumper samples, those with a thicker varnish layer or with talc in the composition seem to attenuate more. We also provide an estimation of the measurement uncertainty for the validation of the obtained results. Uncertainty analysis yields values below 0.21 dB with a 95% coverage interval in the measured frequency band. When comparing the measured value with its uncertainty, i.e., the relative uncertainty, the lower the frequency in the measured band, the more accurate the measurements seem to be., Xunta de Galicia | Ref. ED431C 2019/26, Ministerio de Universidades | Ref. 33.50.460A.752, Agencia Estatal de Investigación | Ref. PID2020-112545RB-C52
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Interference free multiuser modulation for mmWave radio links

  • Torio Gomez, Pablo
  • Sánchez, Manuel G.
  • Lopez Valcarcel, Luis Antonio
Radiocommunications in the mmWave band present strong free-space attenuation, which requires power maximization at the receiver. A code division multiple access (CDMA) modulation system increases the receiver’s ability to detect the transmitted signal by means of spectrum spreading. The main benefit of direct sequence spread spectrum for mmWaves is the increase in coverage due to the process gain. The main drawback of its use in high-speed communications is bandwidth reduction. Fortunately, this can be compensated for by the huge bandwidth available at mmWave frequencies. However, most of the codes available for CDMA have mutual interference. The zero correlation zone (ZCZ) codes are orthogonal to each other, but only under the condition that no multipath far echoes are received. This condition is fulfilled in mmWave radio communications, owing to strong propagation attenuation and also because of the beamforming that radio links usually do at this frequency. In this study, a field experiment is carried out consisting of data reception at 28 GHz from many different users who are simultaneously transmitting using CDMA on BPSK modulation and then comparing the performance of conventional maximal pseudorandom (PR) codes versus ZCZ codes. It is verified that the latter are received with the same process gain but no mutual interference, approximately resulting in a 12 dB improvement on the modulation error ratio (MER), Agencia Estatal de Investigación | Ref. PID2020-112545RB-C52, Xunta de Galicia | Ref. ED431C 2019/26, Xunta de Galicia | Ref. ED481A-2020/049
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Multipath detection and mitigation of random noise signals propagated through naturally lossy dispersive media for radar applications

  • Vázquez Alejos, Ana Maria
  • Dawood, Muhammad
This paper describes a methodological analysis of the Brillouin precursor formation to understand the impairments undergone by like-noise and random noise waveforms propagating through naturally dispersive media commonly found in radar applications. By means of a frequency-domain methodology based on considering the frequency response of the medium under study, the effect of these dispersive media on the evolution of an input signal can be seen as frequency filtering. The simulations were performed at a center frequency of 1.5 GHz and for a signal bandwidth of 3 GHz. Four random noise signals were considered: Barker codes, PRBS codes, Frank codes, Costas codes and additive white Gaussian noise. The experienced impairments were assessed in terms of cross-correlation function (CCF) degradation. The differences in the behavior of each type of phase and frequency coded signal to face the dispersive propagation have been demonstrated in terms of parameters used for information retrieval: peak amplitude decay, CCF secondary sidelobe level and multipath detectability. Finally, a frequency filtering approach is proposed to mitigate the impairments due to dispersive propagation under multipath conditions., Xunta de Galicia | Ref. ED431C 2019/26, Xunta de Galicia | Ref. ED431G 2019/08, Centro Singular de Investigación de Galicia, Agencia Estatal de Investigación | Ref. PID2020-112545RB-C52
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Building penetration losses at 3.5 GHz: dependence on polarization and incidence angle

  • García Sánchez, Manuel
  • Iglesias, Carlos
  • Cuiñas Gómez, Íñigo
  • Expósito Pérez, Isabel
We measured and analyzed the building penetration losses for four different kinds of facades as a function of the incidence angle and polarization at 3.5 GHz, which is a frequency of interest for fifth generation (5G) communication systems. Results show that the attenuation may vary up to 8 dB with the incidence angle, which justifies the need for an angular characterization of the penetration losses, going beyond the simpler characterization used for normal incidence. We also found that there is a relevant polarization dependence of this attenuation, as electromagnetic theory predicts for wave transmission across flat discontinuities and even across flat dielectric slabs. Results would be of interest for the network design of future 5G base stations using orthogonal polarizations., Xunta de Galicia | Ref. ED431C 2019/26, Ministerio de Ciencia e Innovación | Ref. PID2020-112545RB-C52, Fundação para a Ciência e a Tecnologia | Ref. UIDB/EEA/50008/2021
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Tolerance-aware design of frequency selective surfaces based on a scaling relationship

  • Villar, Maria
  • Cuiñas Gómez, Íñigo
The impact of manufacturing tolerances on the electromagnetic performance of frequency selective surfaces (FSS) is investigated through a physically grounded scaling-based framework. Fabrication tolerances T introduce independent variations in the outer dimensions and conductor width, producing non-uniform geometric perturbations that are amplified in the smallest regions of the unit cell. Since the resonant behavior of FSS structures is governed by these critical features, such perturbations lead to measurable shifts in the resonance frequency, expressed as a relative deviation Δf. A systematic set of full-wave simulations covering multiple FSS geometries, operating frequency bands, and tolerance levels was used to investigate the relationship between fabrication accuracy and resonance-frequency deviation. When analyzed in terms of the normalized parameter T/w, where w denotes the conductor width, results from different geometries and frequency bands collapse onto a linear trend. This behavior is described by the relationship Δf(%)≈ 40 ∙(T/w), obtained through regression analysis of the complete dataset, providing a compact tolerance-performance model that captures a common scaling trend across the analyzed FSS geometries. The proposed formulation links fabrication-induced geometric perturbations to RF performance and enables direct estimation of allowable manufacturing tolerances from performance specifications. The resulting framework supports tolerance-aware design and facilitates the selection of suitable manufacturing technologies based on fabrication capability and electromagnetic performance requirements., Agencia Estatal de Investigación | Ref. PID2020-112545RB-C52, Universidade de Vigo/CISUG
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Human exposure to EMF from 5G base stations: analysis, evaluation and comparison of different assessment methods

  • Expósito Pérez, Isabel
  • Hakizimali, Cedric
  • García Sánchez, Manuel
  • Cuiñas Gómez, Íñigo
  • Verhaevert, Jo
5G networks deployment poses new challenges when evaluating human exposure to electromagnetic fields. Fast variation of the user load and beamforming techniques may cause large fluctuations of 5G base stations field level. They may be underestimated, resulting in compliance of base stations not fitting the requirements. Apparently, broadband field meters would not be adequate for measuring such environments. However, we analyze the feasibility of confidently using broadband field meters and compare their performance with alternative equipment. Measurements based on the synchronization signals power level, using spectrum analyzers or drive test scanners, may be valid, if gain differences between the signaling and data radiation patterns are characterized. These methods lead to good results but require more time and knowledge. Nevertheless, using broadband field meters is still possible if the measurement results are corrected considering the base station load. Under specific conditions, explained here, fast assessment of 5G compliance could be provided., Agencia Estatal de Investigación | Ref. PID2020-112545RB-C52, Ministerio de Universidades, Universidade de Vigo/CISUG