Pasar al contenido principal

CATALIZADORES Y ELECTRODOS AVANZADOS BASADOS EN MATERIAS PRIMAS NO CRITICAS PARA PILAS DE COMBUSTIBLE, ELECTROLIZADORES Y BATERIAS METAL-AIRE

PID2020-115848RB-C21

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2020
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 26
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Transformation of CoFe2O4 spinel structure into active and robust CoFe alloy/N-doped carbon electrocatalyst for oxygen evolution reaction

  • Gebreslase, Gebrehiwet Abrham
  • Martínez Huerta, M. Victoria
  • Sebastián del Río, David
  • Lázaro Elorri, María Jesús
11 figures, 2 tables.-- Supplementary information available., Electrochemical water splitting is an environmentally benign technology employed for H2 production; however, it is critically hampered by the sluggish kinetics of the oxygen evolution reaction (OER) at the positive electrode. In this work, nitrogen-doped carbon-coated CoFe electrocatalysts were synthesized via a three-step route comprising (1) hydrothermal reaction, (2) in-situ polymerization of dopamine and (3) carbonization. The effect of carbonized polydopamine on the overall physicochemical properties and electrochemical activity of CoFe catalysts was systematically studied. By controlling and optimizing the ratio of CoFe2O4 and dopamine contents, a transformation of the CoFe2O4 structure to CoFe alloy was observed. It was found that CoFe/NC30% (prepared with 30% dopamine) exhibits an excellent catalytic activity towards OER. A small overpotential of 340 mV was required to generate a current density of 10 mA cm-2 in a 1.0 M KOH electrolyte. More importantly, the CoFe/NC30% catalyst reflected exceptional durability for at least 24 h. This research sheds light on the development of affordable, highly efficient, and durable electrocatalysts for OER., Financial support from the European Union's Horizon 2020 Research and Innovation programme under the Marie Skłodowska-Curie Actions-Innovative Training Networks (MSCA-ITN) Grant Agreement 813748 are gratefully acknowledged. The authors wish to acknowledge the grants PID2020-115848RB-C21 and PID2020-115848RB-C22 funded by MCIN/AEI/10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Sulfur-doped carbon nanofibers as support for tantalum oxides bifunctional catalysts for the oxygen reduction and evolution reactions

  • Ruiz Cornejo, Juan Carlos
  • Sebastián del Río, David
  • Pardo, Juan Ignacio
  • Martínez Huerta, M. Victoria
  • Lázaro Elorri, María Jesús
10 figures, 7 tables.-- Supplementary information available., Highly efficient, low-cost and stable bifunctional catalysts for oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) are highly desirable for the development of green electrochemical energy storage and conversion devices. Here, we report the synthesis of sulfur-doped carbon nanofibers (CNF) as support for tantalum oxide nanoparticles. Carbon nanofibers and tantalum oxides represent a durable choice for oxygen electrocatalysis, but an improvement of catalytic activity is required. Upon doping, sulfur is found to be mainly bonded to carbon as C–S–C species (more than 80%). The results show that the effective incorporation of sulfur in the support has a clear positive effect on the electroactivity of the tantalum oxide catalysts. It causes a decrease of OER/ORR overpotential of 80 mV with respect to the undoped counterpart, with special improvement in the ORR. The new catalysts have shown an interesting bifunctional behavior for the OER and ORR, as well as a good stability through time., The authors wish to acknowledge the grants PID2020-115848RB-C21 and PID2020-115848RB-C22 funded by MCIN/AEI/10.13039/501100011033, and to the Gobierno de Aragón (DGA) for the funding to Grupo de Conversión de Combustibles (T06_17R). J.C. Ruiz-Cornejo acknowledges also DGA for his PhD grant., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

NiCoP/CoP sponge-like structure grown on stainless steel mesh as a high-performance electrocatalyst for hydrogen evolution reaction

  • Gebreslase, Gebrehiwet Abrham
  • Martínez Huerta, M. Victoria
  • Sebastián del Río, David
  • Lázaro Elorri, María Jesús
8 figures, 2 tables.-- Supplementary information available., The stainless steel mesh (SSM) has received remarkable attention for hydrogen and oxygen evolution reactions. It was demonstrated that the SSM exhibits admirable performance towards oxygen evolution reaction (OER) electrocatalysis, while its catalytic activity for hydrogen evolution reaction (HER) remains quite low. This obstructs the utilization of SSM-based catalysts for sustainable complete water electrolysis. In this study, a facile hydrothermal route followed by a phosphorization process was adopted to transform commercially available SSM materials into high-performance and stable electrocatalysts for alkaline HER. We report an interconnected NiCoP-CoP sponge-like structure on SSM substrate without polymer binder. Benefiting from the 3D construction with high exposed surface area, close contact between electroactive species and conductive surface, and facilitated infiltration of electrolyte, the as-prepared NiCoP@SSM electrocatalyst brought an improved catalytic activity for HER, required a low overpotential of 138 mV to derive a current density of 10 mAcm−2 in 1.0 M KOH aqueous solution. The high performance of the NiCoP@SSM catalyst has also unveiled fast reaction kinetics (presents a small Tafel slope of 74 mV/dec), a relatively large electrochemical active surface area (ECSA), and small charge transfer resistance. Furthermore, the NiCoP@SSM electrode also presented excellent stability during long-term measurements, making it one of the most encouraging HER electrodes to date. This research study paves the way for the development of HER-active electrocatalysts made from SSMs that are commercially available, low-cost, and highly active., The authors wish to acknowledge the grants PID2020-115848RB-C21 and PID2020-115848RB-C22 funded by MCIN/AEI/10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Bifunctional oxygen electrocatalysts based on non-critical raw materials: Carbon nanostructures and iron-doped manganese oxide nanowires

  • Villanueva, Nicolás
  • Alegre Gresa, Cinthia
  • Martínez-Visus, Iñigo
  • Lázaro Elorri, María Jesús
10 figures, 6 tables.-- Supplementary information available., Alkaline metal-air batteries are unique systems for energy storage. These devices require a bifunctional catalyst in the positive electrode that must perform both the oxygen evolution and reduction reactions (OER and ORR, respectively). Generally, cobalt-based oxides are employed as air electrodes; however, cobalt is a critical raw material. Future battery devices will mandatorily need non-critical raw materials based on highly abundant metals. Here we investigate the feasibility of iron-doped manganese oxide in the form of nanowires (Fe-MONW) combined with carbon nanofibers. MnO2 is known for being active for the ORR, however its activity towards the OER is not yet fully understood. Carbon nanofibers (CNF) on the other hand, provide the necessary electrical conductivity to the catalytic system. Simple methods and economic materials are employed to synthesize the Fe-MONW/CNF composites. Our results show that there is a synergistic effect between CNF and MONW, especially for the ORR, which manifests in an increase in the number of exchanged electrons– from 2.9 to 3.5 – and a shift in the onset potential of 70 mV. Doping MONW with iron further enhances the catalytic activity, for both the ORR and OER. Fe ions generate defects in the manganese oxide structure, favoring the adsorption of oxygen and eventually enhancing the catalytic activity. Fe-doped-MONW shows onset potentials for OER comparable to the benchmark catalyst, IrO2. The improvement on the catalytic activity is particularly evident in terms of the reversibility gap, ΔE. ΔE is the difference between the potential when the current density is 10 mA cm−2 in OER and the half-wave potential for the ORR, being a fundamental parameter to assess the performance of metal-air batteries. The reversibility gap for the best catalyst, 5Fe-MONW/CNF, is ΔE = 922 mV (140 mV lower than non-doped MONW/CNF and between 160 and 320 mV lower than the individual components, MONW and CNF). Endurance tests show remarkable stability of the iron-doped MONW/CNF, with a stable potential and an even lower ΔE of 800 mV for ca. 20 h of operation (charge-discharge cycles at ± 10 mA cm−2)., The authors wish to acknowledge the grant PID2020-115848RB-C21 funded by MCIN/AEI/10.13039/501100011033. Authors also acknowledge Gobierno de Aragón (DGA) for the financial support to Grupo de Conversión de Combustibles (T06_20R). N. Villanueva-Martínez also acknowledges DGA for his pre-doctoral contract., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

N-doped carbon xerogels from urea-resorcinol-formaldehyde as carbon matrix for Fe-N-C catalysts for oxygen reduction in fuel cells

  • Álvarez Manuel, Laura
  • Alegre Gresa, Cinthia
  • Sebastián del Río, David
  • Eizaguirre, Alberto
  • Napal, Pedro F.
  • Lázaro Elorri, María Jesús
9 figures, 5 tables. Supplementary material available., Platinum group metal-free catalysts have been intensively investigated in the last decades as an alternative to platinum with the aim of lowering the cost of polymer electrolyte fuel cells. In particular, iron-nitrogen-carbon (Fe-N-C) has proved to be the most active towards the oxygen reduction reaction. For practical application, a hierarchical pore structure is required, with micropores favouring the creation of active sites and larger pores (meso- and macropores) facilitating the mass transport. In this work, carbon xerogels are investigated to hosting iron and nitrogen species obtained by a template-free method. The introduction of nitrogen in a one-step polymerization of urea with resorcinol and formaldehyde is investigated for the first time in this field by varying the relative content of reactants. The urea/resorcinol ratio greatly influences the pore structure of the Fe-N-C catalyst and the ORR electrocatalytic activity thereof. The ORR activity is favored for a balanced urea/resorcinol ratio where porosity is well developed and relatively high iron and nitrogen contents are incorporated to the carbon xerogel. In acid (0.5 M H2SO4), the onset potential is 0.82 V vs. RHE, with a number of exchanged electrons very close to 4 (i.e. full conversion to water) and low Tafel slope of 71 mV dec−1, for the most active catalyst of the series, possessing the best compromise of iron and nitrogen active sites. Fuel cell tests corroborate that the catalyst with the most developed porous structure shows the best performance., The authors wish to acknowledge the grant PID2020-115848RB-C21 funded by MCIN/AEI/10.13039/501100011033. Authors also acknowledge Gobierno de Aragón (DGA) for the financial support to Grupo de Conversión de Combustibles (T06_20R). L. Álvarez acknowledges also DGA for her pre-doctoral contract., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Carbonized polydopamine-based nanocomposites: The effect of transition metals on the oxygen electrocatalytic activity

  • Cebollada Borao, Jesús
  • Sebastián del Río, David
  • Lázaro Elorri, María Jesús
  • Martínez Huerta, M. Victoria
12 figues, 2 tables.-- Supplementary information available.-- This article belongs to the Special Issue Application of Porous Nanomaterials in Energy Storage and Catalysis, The electrochemical oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) are the most critical processes in renewable energy-related technologies, such as fuel cells, water electrolyzers, and unitized regenerative fuel cells. N-doped carbon composites have been demonstrated to be promising ORR/OER catalyst candidates because of their excellent electrical properties, tunable pore structure, and environmental compatibility. In this study, we prepared porous N-doped carbon nanocomposites (NC) by combining mussel-inspired polydopamine (PDA) chemistry and transition metals using a solvothermal carbonization strategy. The complexation between dopamine catechol groups and transition metal ions (Fe, Ni, Co, Zn, Mn, Cu, and Ti) results in hybrid structures with embedded metal nanoparticles converted to metal–NC composites after the carbonization process. The influence of the transition metals on the structural, morphological, and electrochemical properties was analyzed in detail. Among them, Cu, Co, Mn, and Fe N-doped carbon nanocomposites exhibit efficient catalytic activity and excellent stability toward ORR. This method improves the homogeneous distribution of the catalytically active sites. The metal nanoparticles in reduced (MnO, Fe3C) or metallic (Cu, Co) oxidation states are protected by the N-doped carbon layers, thus further enhancing the ORR performance of the composites. Still, only Co nanocomposite is also effective toward OER with a potential bifunctional gap (ΔE) of 0.867 V. The formation of Co-N active sites during the carbonization process, and the strong coupling between Co nanoparticles and the N-doped carbon layer could promote the formation of defects and the interfacial electron transfer between the catalyst surface, and the reaction intermediates, increasing the bifunctional ORR/OER performance., This research was funded by MCIN/AEI/10.13039/501100011033, grant number PID2020-115848RB-C21 and PID2020-115848RB-C22., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Organic xerogels combined with iron and nitrogen as PGM-free catalysts for the oxygen reduction reaction

  • Álvarez Manuel, Laura
  • Alegre Gresa, Cinthia
  • Sebastián del Río, David
  • Lázaro Elorri, María Jesús
6 figures, 11 tables.-- Supplementary information available., Platinum-group-metal free catalysts have been widely studied in the last decade as an alternative to Pt, employed in fuel cells. Several carbon precursors have been investigated as carbon matrix for iron-nitrogen-carbon (Fe–N–C) catalysts, characterized by a large amount of micropores, fundamental to create Fe-Nx-C active sites. Nonetheless, it is also acknowledged that wider pores are needed to facilitate mass transfer of oxygen/water (reagent/product of fuel cells) towards/from the active sites. Organic xerogels are known as easily tunable materials, that allow doping with a variety of heteroatoms. The present manuscript presents an investigation on the use of organic xerogels combined with iron and nitrogen in a single-step to obtain Fe–N-CXG electro-catalysts for the oxygen reduction reaction (ORR) of proton exchange membrane fuel cells. Several features of both organic xerogels and catalysts on the ORR activity are assessed: the textural properties of the organic xerogel, the iron loading of the Fe–N–C catalysts and the effect of acid-leaching of the catalysts. The present study proves the feasibility of using organic xerogels as carbon precursor to obtain PGM-free catalysts in an easy manner and scalable single-step synthesis. Catalysts obtained from organic xerogels synthesized at mildly acid pHs (5.8 and 6), with a nominal iron loading of 2 wt%, and subjected to two sets of acid leaching/thermal treatments, present enhanced catalytic activity towards the ORR., The authors wish to acknowledge the grant PID2020-115848RB-C21 funded by MCIN/AEI/10.13039/501100011033. Authors also acknowledge Gobierno de Aragón (DGA) for the financial support to Grupo de Conversión de Combustibles (T06_20R). L. Álvarez acknowledges also DGA for her pre-doctoral contract., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Investigation of the properties influencing the deactivation of iron electrodes in iron-air batteries

  • Villanueva, Nicolás
  • Alegre Gresa, Cinthia
  • Rubín, Javier
  • McKerracher, Rachel
  • Ponce de León, Carlos
  • Figueredo-Rodríguez, H. A.
  • Lázaro Elorri, María Jesús
8 figures, 6 tables.-- Supplementary information available., Iron-air batteries hold the potential to be a key technology for energy storage, thanks to their energy density, low cost, safety and abundance of their materials. In order to scale the technology up and optimize the cell formulations, it is key to obtain a clear understanding of how the physical-chemical properties of the electrode influence their electrochemical behaviour, in particular, the capacity loss. In this work, we propose for the first time mathematical correlations between textural and crystallographic properties of iron electrodes and their electrochemical stability. By adjusting synthesis parameters, we were able to tune pore size and volume, surface area and crystal size of iron oxides, and found that stability is highly correlated to both surface area and pore size. Large surface area and small average pore size provide electrodes with enhanced stability. We hypothesize that the cause for deactivation is the passivation of the electrodes ascribed to the formation of a non-conductive, non-reactive iron (II) hydroxide layer during discharge, which then cannot be reduced to iron again. We validate this hypothesis with electrochemical impedance spectroscopy studies, which show that, in the more stable electrodes, the charge transfer resistance in the Fe(OH)2 to Fe reduction does not significantly change after cycling, contrary to the behaviour of the less stable electrodes, corroborating our hypothesis. Furthermore, the electrode with the best properties was cycled 100 times, retaining almost 75% of its initial capacity at the end of the 100 cycles. These results are highly relevant for the future design and operation of iron-air batteries., The authors wish to acknowledge Ministerio de Ciencia e Innovación and Agencia Estatal de Investigación (MCIN/AEI/10.13039/501100011033) for the PID2020-115848RB-C21 grant. The authors also thank the European Union and the NextGeneration EU program for the funding on grant TED2021-130279A-I00. Authors also acknowledge Gobierno de Aragón (DGA) for the financial support to Grupo de Conversión de Combustibles (T06_20R). N. Villanueva acknowledges also DGA for his pre-doctoral contract., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

On the effect of the nature of carbon nanostructures on the activity of bifunctional catalysts based on manganese oxide nanowires

  • Villanueva, Nicolás
  • Alegre Gresa, Cinthia
  • Sebastián del Río, David
  • Orozco, Nataly
  • Lázaro Elorri, María Jesús
Manganese oxide nanowires (MONW) combined with carbon nanostructures were synthesized using three different carbon materials, and their effect on the activity towards Oxygen Reduction Reaction (ORR) and Oxygen Evolution Reaction (OER) was investigated in alkaline electrolytes. The carbon structures were carbon nanofibers (CNF), multiwall carbon nanotubes (CNT) and reduced graphene oxide (rGO). Both MONW and carbon nanostructures were characterized by X-ray diffraction, scanning and transmission electron microscopy, N2 physisorption and X-ray photoelectron spectroscopy. The electrochemical activity was assessed in a three-electrode cell. Composite MONW/CNF showed the best activity towards ORR, and MONW/rGO exhibited the highest activity towards OER of the series. The addition of the carbon nanostructures to MONW increased the number of electrons transferred in the ORR, indicating a synergistic effect between the carbon and manganese oxide structures due to changes in the reaction pathway. The analysis of Tafel slopes and electrochemical impedance spectroscopies showed that carbons and MONW catalyze different steps of the reactions, which explains the better activity of the composites. This led us to synthesize a MONW/rGO-CNF composite, where rGO-CNF is a hybrid carbon material. Composite MONW/rGO-CNF showed an improved activity towards ORR, close to the benchmark Pt/C catalyst, and activity towards OER, close to MONW/rGO, and better than the benchmark IrO2 catalyst. It also showed remarkable stability in challenging operation conditions., The authors wish to acknowledge Ministerio de Ciencia e Innovación and Agencia Estatal de Investigación (MCIN/AEI/10.13039/501100011033) for the PID2020-115848RB-C21 grant. The authors also thank the European Union and the NextGeneration EU program for the funding of grant TED2021-130279A-I00. The authors also acknowledge Gobierno de Aragón (DGA) for the financial support to Grupo de Conversión de Combustibles (T06_20R). N. Villanueva also acknowledges DGA for his pre-doctoral contract., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Single atom Cu-N-C catalysts for the electro-reduction of CO2 to CO assessed by rotating ring-disc electrode

  • Pérez Rodríguez, Sara
  • Gutiérrez Roa, Manuel
  • Giménez Rubio, Ana Cristina
  • Ríos Ruiz, D.
  • Arévalo Cid, Pablo
  • Martínez Huerta, M. Victoria
  • Zitolo, Andrea
  • Lázaro Elorri, María Jesús
  • Sebastián del Río, David
11 figures, 1 table.-- Supplementary information available., The electrochemical CO2 reduction reaction (CO2RR) to controllable chemicals is considered as a promising pathway to store intermittent renewable energy. Herein, a set of catalysts based on copper-nitrogen-doped carbon xerogel (Cu-N-C) are successfully developed varying the copper amount and the nature of the copper precursor, for the efficient CO2RR. The electrocatalytic performance of Cu-N-C materials is assessed by a rotating ring-disc electrode (RRDE), technique still rarely explored for CO2RR. For comparison, products are also characterized by online gas chromatography in a H-cell. The as-synthesized Cu-N-C catalysts are found to be active and highly CO selective at low overpotentials (from −0.6 to −0.8 V vs. RHE) in 0.1 M KHCO3, while H2 from the competitive water reduction appears at larger overpotentials (−0.9 V vs. RHE). The optimum copper acetate-derived catalyst containing Cu-N4 moieties exhibits a CO2-to-CO turnover frequency of 997 h−1 at −0.9 V vs. RHE with a H2/CO ratio of 1.8. These results demonstrate that RRDE configuration can be used as a feasible approach for identifying electrolysis products from CO2RR., Authors acknowledge Grant PID2020-115848RB-C21 “STORELEC” project, and TED2021-129694B-C22 “DEFY-CO2” project funded by MCIN/AEI/10.13039/501100011033. They also acknowledge LMP253_21 project funded by Gobierno de Aragón. Sara Pérez-Rodríguez thanks Grant IJC2019-041874-I funded by the MCIN/AEI/10.13039/501100011033. Ana Cristina Giménez thanks CSIC for her JAE Intro ICU 2021-ICB-04 grant. David Ríos-Ruiz acknowledges the Y2020/EMT-6419 “CEOTRES” project funded by the Comunidad Autonoma de Madrid., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Bifunctional TiCo electrocatalysts based on N-doped graphene cryogels for the oxygen evolution and reduction reactions

  • Luque-Centeno, José Manuel
  • Martínez Huerta, M. Victoria
  • Sebastián del Río, David
  • Baglio, Vincenzo
  • Lázaro Elorri, María Jesús
10 figures, 5 tables., Three-dimensional N-doped graphene cryogels (NGC) modified with Ti and Co nanoparticles are investigated as bifunctional oxygen electrocatalysts for potential application in unitized regenerative fuel cells (URFCs). These composites have been successfully produced via a combined solvothermal, freeze-drying, and thermal treatment procedure. Crystallographic structure, surface properties, and morphology are analyzed to study the influence of each metal and the bimetallic combination in forming active sites for oxygen reduction (ORR) and oxygen evolution (OER) reactions. The intrinsic catalytic activity of the composites was determined by rotating disk electrode and further assessed in a gas diffusion electrode to test them in more realistic conditions for URFCs in 6 M KOH. Results revealed the remarkable bifunctional activity of Co/NGC and bimetallic TiCo/NGC composites. The synergistic effect of the metallic cobalt and surface atomic composition of Co3O4 distributed on the N-doped graphene cryogel in Co/NGC is responsible for the high bifunctional performance. Moreover, the partial substitution of cobalt for a less critical raw material, such as titanium, allows the electrocatalyst to maintain great bifunctional activity and stability. The nitrogen doping of the graphene cryogel structure can influence the anatase/rutile titania ratio that forms during pyrolysis. As a result, defects, oxygen vacancies, and Ti3+ species are formed, which, when combined with Co nanoparticles, contribute to the outstanding performance and stability of the TiCo/NGC composite. The excellent performance of N-doped graphene cryogel-based electrocatalysts in GDE conditions indicates their potential use in electrochemical processes, which involve gas-phase reactions., The authors wish to acknowledge the grants PID2020-115848RB-C21 and PID2020-115848RB-C22 funded by MCIN/AEI/10.13039/501100011033, and the Spanish National Research Council (CSIC) through the i-LINK + Programme (i-LINK1106)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of carbon xerogel activation on Fe−N−C catalyst activity in fuel cells

  • Álvarez Manuel, Laura
  • Alegre Gresa, Cinthia
  • Sebastián del Río, David
  • Napal, Pedro F.
  • Moreno Redondo, C.
  • Bailón García, Esther
  • Carrasco Marín, Francisco
  • Lázaro Elorri, María Jesús
6 figures, 7 tables.-- Supplementary information available., Fe−N−C catalysts are an interesting option for polymer electrolyte fuel cells due to their low cost and high activity towards the oxygen reduction reaction (ORR). Since Fe−N−C active sites are preferentially formed in the micropores of the carbon matrix, increasing the microporosity is highly appealing. In this work, carbon xerogels (CXG) were activated by physical and chemical methods to favor the formation of micropores, used as carbon matrices for Fe−N−C catalysts, and investigated for the ORR. The catalysts were characterized by solid-state techniques to determine chemical composition and pore structure. Physical activation increased microporosity up to 2-fold leading to catalysts with a larger density of active sites (more than twice iron and nitrogen uptake, pyridinic N and Nx−Fe). This entailed a higher ORR intrinsic activity determined in a 3-electrode cell (80 mV better half-wave potential). At the cathode of a fuel cell, the catalysts based on activated carbon materials showed 26 % lower power density ascribed to a more hydrophilic surface, causing a larger extent of flooding of the electrode that counterbalances the higher intrinsic activity. Interestingly, a more stable behavior was observed for the activated catalysts, with up to 2-fold better relative power density retention after 20-hour operation., The authors wish to acknowledge the grant PID2020-115848RB-C21 funded by MCIN/AEI/10.13039/501100011033. This research has received funding from the European Institute of Innovation and Technology (EIT) through project EIT RM – n. 18252. Authors also acknowledge Gobierno de Aragón (DGA) for the financial support to Grupo de Conversión de Combustibles (T06_23R). L. Álvarez acknowledges also DGA for her pre-doctoral contract., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tailored porous carbon xerogels for Fe-N-C catalysts in proton exchange membrane fuel cells

  • Álvarez Manuel, Laura
  • Alegre Gresa, Cinthia
  • Sebastián del Río, David
  • Napal, Pedro F.
  • Lázaro Elorri, María Jesús
8 figures, 8 tables.-- Supplementary information available., Atomically dispersed Fe-N-C catalysts for the oxygen reduction reaction (ORR) have been synthesized with a template-free method using carbon xerogels (CXG) as a porous matrix. The porosity of the CXGs is easily tunable through slight variations in the synthesis procedure. In this work, CXGs are prepared by formaldehyde and resorcinol polymerization, modifying the pH during the process. Materials with a broad range of porous structures are obtained: from non-porous to micro-/meso-/macroporous materials. The porous properties of CXG have a direct effect on Fe-N-CXG activity against ORR in an acidic medium (0.5 M H2SO4). Macropores and wide mesopores are vital to favor the mass transport of reagents to the active sites available in the micropores, while narrower mesopores can generate additional tortuosity. The role of microporosity is investigated by comparing two Fe-N-C catalysts using the same CXG as the matrix but following a different Fe and N doping procedure. In one case, the carbonization of CXG occurs rapidly and simultaneously with Fe and N doping, whereas in the other case it proceeds slowly, under controlled conditions and before the doping process, resulting in the formation of more micropores and active sites and achieving higher activity in a three-electrode cell and a better durability during fuel cell measurements. This work proves the feasibility of the template-free method using CXG as a carbon matrix for Fe-N-C catalysts, with the novelty of the controlled porous properties of the carbon material and its effect on the catalytic activity of the Fe-N-C catalyst. Moreover, the results obtained highlight the importance of the carbon matrix’s porous structure in influencing the activity of Fe-N-C catalysts against ORR., Authors acknowledge Grant PID2020-115848RB-C21 funded by MCIN/AEI/10.13039/501100011033 and Gobierno de Aragón (T06_23R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Materiales compuestos de carbono dopado con nitrógeno y cobalto y cobre como catalizadores bifuncionales

  • Cebollada Borao, Jesús
  • Sebastián del Río, David
  • Lázaro Elorri, María Jesús
  • Martínez Huerta, M. Victoria
2 figuras.-- Abstract de la comunicación oral de Tecnologías para la generación sostenible de energía presentada en la XVI Reunión del Grupo Español del Carbón (Reunión GEC 2023), celebrada en Gijón del 22 al 25 de octubre de 2023., El hidrógeno es el vector energético que nos permitirá realizar la transición hacia nuevas energías limpias. Para ello es necesario encontrar catalizadores activos y de bajo coste para la producción y uso del hidrógeno en tecnologías, como las pilas de combustible regenerativas en una unidad (URFCs), evitando el uso de metales nobles (Pt, Ir, Ru). En este dispositivo, la reacción de reducción de oxígeno (ORR) y la reacción de evolución de oxígeno (OER) desempeñan roles vitales en el electrodo de oxígeno [1]. Se ha realizado un estudio de materiales compuestos basados en combinaciones de Cu y Co con una matriz de carbono dopada con nitrógeno como catalizadores bifuncionales activos para OER y ORR para su uso en URFC [2]. El objetivo de este trabajo ha sido optimizar la cantidad de metales en los composites manteniendo la misma actividad y estabilidad de los electrocatalizadores., Los autores desean agradecer al Ministerio de Ciencia e Innovación y a la Agencia Estatal de Investigación (MCIN/AEI/10.13039/501100011033) la financiación recibida con los proyectos de investigación PID2020- 115848RB-C21 y PID2020-115848RB-C22 y al Gobierno de Aragón la financiación al grupo T0620R. Además J. Cebollada quiere agradecer la ayuda PRE2018-084842 financiada por MCIN/AEI/10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electro-reducción de CO2 en catalizadores Cu-N-C. Detección de productos mediante electrodo rotatorio de disco anillo

  • Gutiérrez Roa, Manuel
  • Pérez Rodríguez, Sara
  • Giménez Rubio, Ana Cristina
  • Ríos Ruiz, D.
  • Arévalo-Cid, Pablo
  • Martínez Huerta, M. Victoria
  • Zitolo, Andrea
  • Lázaro Elorri, María Jesús
  • Sebastián del Río, David
1 figura.-- Abstract de la comunicación oral presentada en la XVI REUNIÓN GEC 2023 en la sección Aplicaciones catalíticas, medioambientales y biosanitarias, Gijón (España), celebrada del 22 al 25 de octubre de 2023., La reducción electroquímica de CO2 (CO2RR) destaca como una solución prometedora para la mitigación del cambio climático. Sin embargo, esta reacción presenta desafíos debido a la alta estabilidad de la molécula de CO2 y la difícil selectividad hacia diferentes productos, así como la competencia con la reacción de evolución de hidrógeno, haciendo necesario el desarrollo de catalizadores activos y selectivos. Actualmente, los catalizadores atómicamente dispersos se posicionan como una solución prometedora para modular la selectividad de esta reacción hacia CO. Entre ellos, los catalizadores M-N-C presentan sitios activos basados en átomos de un metal de transición coordinado con nitrógeno en una matriz carbonosa, lo que permite obtener catalizadores con alta porosidad, buena conductividad eléctrica y bajo coste. En cuanto a la identificación de los productos, si bien técnicas exsitu (cromatografía, espectrometría de masas), son comúnmente utilizadas, estas presentan ciertas limitaciones en términos de desfase temporal y detección de productos en concentraciones muy bajas. Para abordar este inconveniente, el uso de un electrodo rotatorio de disco anillo (RRDE) se propone como una alternativa rápida y factible para la identificación de los productos generados durante la CO2RR. En este método, los catalizadores se depositan en el disco del electrodo, donde tiene lugar la CO2RR, mientras que los productos generados son simultáneamente oxidados en el anillo. Este trabajo presenta el estudio de catalizadores Cu-N-C basados en una matriz carbonosa de xerogel de carbono dopado con nitrógeno. Se analizó la influencia del precursor de cobre y de la concentración de metal durante la síntesis de los catalizadores en su comportamiento electroquímico para la CO2RR mediante el uso de RRDE., Los autores desean agradecer al Ministerio de Ciencia e Innovación y a la Agencia Estatal de Investigación (MCIN/AEI/10.13039/501100011033) la financiación recibida con el proyecto de referencia PID2020- 115848RB-C21 y al Gobierno de Aragón la financiación al grupo T06-20R y al proyecto LMP253_21. S. Pérez- Rodríguez agradece también al MCIN/AEI por la concesión de su contrato Juan de la Cierva-Incorporación (IJC2019-041874-I)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Building robust copper nanostructures via carbon coating derived from polydopamine for oxygen reduction reaction

  • Cebollada Borao, Jesús
  • Sebastián del Río, David
  • Yamasaki, Jun
  • Agúndez Rodríguez, Javier
  • Lázaro Elorri, María Jesús
  • Martínez Huerta, M. Victoria
13 figures, 3 tables., This study explores the synthesis and electrocatalytic performance of copper-nitrogen-carbon composites formed by Cu single atoms/clusters embedded in nitrogen-doped carbon with Cu/Cu2O nanoparticles (Cu-X-NC) for the oxygen reduction reaction (ORR). The catalysts were synthesized using polydopamine as a carbon and nitrogen source via the solvothermal carbonization (STC) method, followed by pyrolysis and acid washing. The effect of solvothermal carbonization temperature (120, 150, and 180 °C) on the structure and ORR activity was investigated. The physicochemical characterization showed that higher STC temperatures reduced the size of copper crystallites, slightly increased the formation of copper(I) oxide, and led to the creation of well-dispersed copper single atoms/clusters at 150 °C. This optimal dispersion enhances the interaction between the copper single atoms and the reactants, leading to faster ORR kinetics, as demonstrated by the lower charge transfer resistance values in electrochemical impedance spectroscopy measurements. Additionally, the balance between micropore and mesopore structures at this temperature facilitates efficient mass transport, which is critical for achieving higher ORR activity. Moreover, accelerated stability tests showed excellent durability for Cu-150-NC, with negligible loss in onset potential after 10,000 cycles. The solvothermal process significantly increased the electrochemically active surface area (ECSA), with Cu-150-NC displaying the highest specific activity and mass activity per gram of copper, indicating superior performance. Overall, these findings underscore the importance of synthesis optimization and provide valuable insights for designing eco-friendly and high-performance copper catalysts for fuel cell applications., The authors wish to acknowledge the grants PID2020-115848RB-C21 and PID2020-115848RB-C22 funded by MCIN/AEI/10.13039/501100011033. J. Cebollada also thanks the grant PRE2018-084842 funded by MCIN/AEI/10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

In situ growth of nickel phosphide on carbon felt as a promising electrocatalyst for the alkaline hydrogen evolution reaction

  • Gebreslase, Gebrehiwet Abrham
  • Martínez Huerta, M. Victoria
  • Sebastián del Río, David
  • Lázaro Elorri, María Jesús
7 figures., One of the key challenges in scaling up sustainable hydrogen production is the need for efficient electrocatalysts based on abundant elements for the hydrogen evolution reaction (HER). This study introduces a simple and scalable method for producing a binder-free NiP supported on carbon felt (NiP@CF) electrocatalyst through a hydrothermal route followed by phosphorization. The three-dimensional (3D) conductive structure of carbon felt, resembling a sponge, is crucial for immobilizing electroactive materials within its fibrous framework. The as-prepared NiP@CF electrocatalyst demonstrates remarkable performance, requiring only a low overpotential of 134 mV to achieve a current density of 10 mA cm–2 in a 1 M KOH electrolyte. Moreover, the catalyst exhibits impressive stability, maintaining its superior performance for at least 60 h without noticeable deterioration. The good performance of the NiP@CF catalyst can be attributed to several factors: the formation of electroactive Ni5P4 and NiP2 phases on the porous carbon felt, the interconnected 3D network of the substrate, which enhances electron and mass transport and improves electrolyte contact and reaction rates, and the increased electrochemical surface area, providing abundant active sites for electrochemical reactions., The authors acknowledge the Grants PID2020-115848RB-C21 and PID2020-115848RB-C22 funded by MCIN/AEI/10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Performance evaluation of poly(vinylidene fluoride)- vinyl benzyl trimethyl ammonium chloride copolymer as anion exchange membranes for fuel cell applications

  • Rehman, Muhammad Habib ur
  • Sebastián del Río, David
  • Napal, Pedro F.
  • Nicotera, Isabella
  • Simari, Cataldo
7 figures, 1 table., In recent years, poly(vinylidene fluoride) (PVDF) and its family of copolymers have started to gain increasing attention as potential systems to produce chemically and mechanically stable anion exchange membranes (AEMs). Here, a novel anion exchange membrane has been synthesized by chemical grafting of a vinyl benzyl trimethylammonium chloride monomer to the PVDF backbone. The resulting PVDF-VB copolymer was investigated under three ionic forms, i.e., Cl–, HCO3–, and OH–, comparing the swelling capability, mechanical robustness, transport properties, and ionic conductivity. In its hydroxylated form, the PVDF-VB membrane exhibited efficient OH– transport under both long and short ranges and achieved a conductivity value of 20 mS/cm at 80 °C and 90% RH. For the first time, the single H2–O2 fuel cell performance of PVDF-VB was investigated, resulting in a beginning-of-life OCV of 1.04 with a peak power density of 118 mW cm–2 at 70, M.H.R., I.N., and C.S. acknowledge financial support under the National Recovery and Resilience Plan (NRRP), Mission 4, Component 2, Investment 1.1, Call for tender No. 1409 published on September 14, 2022 by the Italian Ministry of University and Research (MUR), funded by the European Union – NextGenerationEU – Project Title UNIRE – CUP H53D23007910001, Grant Assignment Decree No. 1409 adopted on September 14, 2022 by the Italian Ministry of Ministry of University and Research (MUR). The ICB-CSIC authors (D.S. and P.F.N.) acknowledge Grant PID2020-115848RB-C21 funded by MCIN/AEI/10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Materiales de carbono derivados de residuos vitivinícolas para la electro-reducción de CO2

  • Giménez Rubio, Ana Cristina
  • Vela, Irene
  • Gutiérrez Roa, Manuel
  • Lázaro Elorri, María Jesús
  • Pérez Rodríguez, Sara
Resumen de la comunicación oral presentada en la II Jornada de Jóvenes Investigadores del Grupo Español del Carbón, celebrada en Baeza (Jaén, España), 20 - 22 de noviembre de 2024, en la sección Aplicaciones de los Materiales basados en Carbono en Generación y Almacenamiento de Energía., La electro-reducción de CO2 (CO2RR) consiste en la conversión de CO2 a otros compuestos carbonosos utilizando electricidad procedente, idealmente, de fuentes renovables. Esta tecnología no solo ofrece una vía para almacenar energía, sino que también contribuye a reducir la concentración de CO2 atmosférico. No obstante, la CO2RR es una reacción compleja debido a que el CO2 es una molécula muy estable y la selectividad de la reacción hacia productos concretos es difícil de controlar. Por ello, su desarrollo requiere el uso de catalizadores avanzados que optimicen tanto la actividad como la selectividad de la reacción. Tradicionalmente, los catalizadores basados en metales han sido los más investigados para la CO2RR. En los últimos años, se han explorado materiales de carbono libres de metal como una alternativa prometedora y de bajo coste. Se ha comprobado que grupos funcionales de N, en especial el piridínico, son capaces de favorecer la conversión de CO2 a CO [1]. Otros estudios sugieren que la porosidad de los catalizadores también influye en su desempeño electroquímico [2]. Como precursor de carbono, se puede emplear biomasa, una materia prima abundante, económica y renovable, lo que contribuye a una tecnología más ecológica y accesible [3]. En este trabajo se han preparado distintos catalizadores a partir de residuos vitivinícolas y urea variando las estrategias de dopado con nitrógeno. La composición de la muestra, estructura y textura se han estudiado mediante diferentes técnicas analíticas. El comportamiento electro-químico fue evaluado en una celda de tres electrodos, empleando una disolución acuosa de 0,1M KHCO3 como electrolito y un electrodo de disco anillo rotatorio como electrodo de trabajo. Los resultados obtenidos muestran la eficacia de los catalizadores en la producción de CO y la influencia de las rutas de síntesis sobre su actividad para la CO2RR., Los autores desean agradecer a MICIU/AEI/10.13039/501100011033 y la Unión Europea NextGenerationEU/PRTR la financiación recibida con el proyecto de referencia PID2020-115848RB-C21 y al Gobierno de Aragón por la financiación al proyecto LMP253_21 y al grupo T06-23R. A.C. Giménez-Rubio desea agradecer al CSIC la concesión de su beca JAE Intro ICU 2021-ICB-04. S. Pérez-Rodríguez agradece también al MICIU/AEI/10.13039/501100011033 la concesión de su contrato Juan de la Cierva-Incorporación IJC2019-041874-I., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Oxidación controlada de nanofibras de carbono para catalizadores de Ni-N-C para la reacción de evolución de oxígeno

  • Serrano-Alcalde, Carlos
  • Loreto, A. A.
  • Pérez Rodríguez, Sara
  • Lázaro Elorri, María Jesús
  • Sebastián del Río, David
Resumen de la comunicación oral presentada en la II Jornada de Jóvenes Investigadores del Grupo Español del Carbón, celebrada en Baeza (Jaén, España), 20 - 22 de noviembre de 2024, en la sección Aplicaciones de los Materiales basados en Carbono en Generación y Almacenamiento de Energía., El mundo se encuentra en plena transición hacia un modelo energético más sostenible y respetuoso con el medioambiente. En este contexto, el hidrógeno emerge como un vector energético clave para lograr dicha transformación. Actualmente, la tecnología más desarrollada para la producción de hidrógeno verde es la electrólisis del agua, aunque su viabilidad económica y técnica depende en gran medida del uso de catalizadores que optimicen su eficiencia. Entre las tecnologías de electrólisis, este estudio se centra en la electrólisis con membrana de intercambio aniónico (AEM), una alternativa con gran potencial, ya que combina las ventajas de la electrólisis alcalina (AE) y la de membrana de intercambio protónico (PEM). Sin embargo, para mejorar la viabilidad de esta tecnología, es fundamental abordar las limitaciones asociadas a la reacción de evolución de oxígeno (OER), cuya cinética es más lenta que la formación de hidrógeno [1]. Este estudio se centra en la investigación de catalizadores de níquel disperso a nivel atómico en una matriz de carbono (nanofibras) dopada con nitrógeno (Ni-N-C) para la reacción de evolución de oxígeno (OER), con el objetivo de aumentar la actividad a dicha semi-reacción. La innovación de esta investigación radica en la modificación química mediante la oxidación con peróxido de hidrógeno de una matriz de nanofibras de carbono, buscando aumentar la cantidad de sitios activos y así mejorar el rendimiento en la OER [2]. Las nanofibras de carbono fueron seleccionadas debido a su excelente conductividad y estabilidad, proporcionada por su estructura interna grafítica. La principal conclusión es que resulta crucial introducir rugosidades y/o defectos en la superficie de las nanofibras para alojar sitios activos sin comprometer la estructura filamentosa, y la oxidación parcial es una buena estrategia para ello., Estos resultados son parte del proyecto de I+D+i de referencia PID2020-115848RB-C21, financiado por MICIU/AEI/10.13039/501100011033. C. Serrano-Alcalde desea además agradecer al MICIU la concesión de su contrato predoctoral PRE2021-099878., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electrocatalizadores derivados de residuos de bodega aplicados a la reacción de reducción de oxígeno

  • Vela, Irene
  • Pérez Rodríguez, Sara
  • Sebastián del Río, David
  • Napal, Pedro F.
  • Lázaro Elorri, María Jesús
Resumen de la comunicación oral presentada en la II Jornada de Jóvenes Investigadores del Grupo Español del Carbón, celebrada en Baeza (Jaén, España), 20 - 22 de noviembre de 2024, en la sección Aplicaciones de los Materiales basados en Carbono en Generación y Almacenamiento de Energía., Hoy en día, la electrocatálisis desempeña un papel fundamental en la lucha contra el cambio climático. Una aplicación de su uso es la producción de energía libre de emisiones contaminantes en dispositivos denominados pilas de combustible. En dichos dispositivos, la reacción limitante es la que ocurre en el cátodo, la reacción de reducción de oxígeno (ORR), con una cinética lenta y que precisa de una cantidad importante de catalizador [1]. Entre los materiales más utilizados como catalizadores en esta reacción se encuentran los basados en nanopartículas de platino soportadas sobre negro de carbono. La necesidad de un metal noble y escaso, encarece el coste total de la pila, complicando su comercialización [2]. Como alternativa, se están desarrollando catalizadores libres de metal basados en materiales de carbono dopados con nitrógeno. El dopado con nitrógeno provoca la redistribución electrónica en su superficie creando especies activas para la adsorción de moléculas de oxígeno [3]. Por otro lado, utilizar como fuente de carbono residuos biomásicos resulta prometedor ya que son sostenibles, baratos y, de este modo, se fomenta la economía circular [4]. El objetivo del trabajo es el estudio y optimización de la ruta de síntesis de materiales de carbono obtenidos a partir de raspones de uva y urea como electrocatalizadores para la ORR. Los materiales se caracterizaron fisicoquímicamente mediante técnicas de análisis de sólidos y electroquímicamente en una celda de tres electrodos con electrodo rotatorio de disco-anillo en KOH 0,1M. A partir de la ruta de síntesis optimizada se obtuvo un material de carbono libre de metal activo para la ORR y con prestaciones similares a un catalizador comercial de Pt/C., Los autores desean agradecer al MCIN/AEI /10.13039/501100011033 por la financiación recibida por el proyecto de investigación PID2020-115848RB-C21 y al Gobierno de Aragón por la financiación al grupo T06_23R. I. Vela desea agradecer al CSIC la concesión de su beca JAE Intro ICU 2021-ICB-04. S. Pérez-Rodríguez agradece también al MCIN/AEI /10.13039/501100011033 la concesión de su contrato Juan de la Cierva-Incorporación IJC2019-041874-I., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Graphene-nanofiber hybrid carbon composites as support boosting tantalum oxides activity of bifunctional oxygen reduction/evolution catalysts

  • Sebastián del Río, David
  • Ruiz Cornejo, Juan Carlos
  • Martínez Huerta, M. Victoria
  • Lázaro Elorri, María Jesús
10 figures, 6 tables.-- Under a Creative Commons BY 4.0 license., Carbon nanocomposites combining two or more carbon structures at the nanoscale present great potential for electrocatalysis. In this work, the combination of graphene with carbon nanofibers (CNF) is investigated as a hybrid support for tantalum-based electrocatalysts in bifunctional oxygen electrodes. Bifunctional catalysts for both the oxygen reduction and the oxygen evolution reactions (ORR and OER) are highly demanded for energy conversion devices like regenerative fuel cells or metal-air batteries. Tantalum oxides were selected as durable and promising active phases. The content of CNF in the composites was varied between 20 % and 75 %, causing an up to 5-fold increase in surface area by inhibiting the restacking of graphene sheets. Hybrid nanocomposites as catalyst support result in a relevant enhancement of ORR activity compared to the bare materials, excellent bifunctionality and exceptional stability. This novel 3-dimensional structure exposing graphene layers aided by intercalated nanofibers boosts the electroactivity and bifunctionality of the oxides., The authors acknowledge Grants PID2020-115848RB-C21 and PID2020-115848RB-C22 funded by MICIU/AEI/10.13039/501100011033, and to the Gobierno de Aragón (DGA) for the funding to Grupo de Investigación Conversión de Combustibles (T06_23R). J.C. Ruiz-Cornejo acknowledges also DGA for his PhD grant. Authors would like to acknowledge the use of Servicio General de Apoyo a la Investigación-SAI, Universidad de Zaragoza., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tuning the activity and selectivity of CuPt/C catalysts for the electrochemical CO2 reduction

  • Gutiérrez Roa, Manuel
  • Sebastián del Río, David
  • Guzmán, Hilmar
  • Zammillo, Federica
  • Hernández, Simelys
  • Lázaro Elorri, María Jesús
  • Pérez Rodríguez, Sara
10 figures, 1 table., Copper-based bimetallic catalysts have garnered significant attention for CO2 electrochemical CO2 conversion due to their ability to catalytically reduce CO2 to hydrocarbons and alcohols. Herein, a set of CuPt/C catalysts with different Cu:Pt atomic ratios are successfully synthesised through galvanostatic displacement. The progressive incorporation of platinum on Cu/C nanoparticles significantly impacts the CO2 electro-reduction performance in a 0.1 M KHCO3 solution. The results revealed that Cu:Pt atomic ratios of 99:1 and 95:5 enhance formate production at mild potentials (-0.6 V vs. RHE) due to an improved water activation compared to monometallic Cu/C and, thus a higher availability of protons (or adsorbed hydrogen, *H) near the active sites. In contrast, lower Cu:Pt ratios or higher overpotentials result in diminished formate production. This behaviour is likely due to the affinity of Pt for the carbon-bound *COOH intermediate, which favors CO formation over formate. These findings demonstrate that Pt incorporation in Cu/C nanoparticles can alter the CO2 reduction mechanism, providing insights into the design of selective formate-producing catalysts., Authors acknowledge Grant PID2020–115848RB-C21 “STORELEC” project funded by MICIU/AEI/10.13039/501100011033 and Grant CNS2023–144433 “ALCOELECTRO” project funded by MICIU/AEI/10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR”. Authors also acknowledge Gobierno de Aragón (DGA) for financially supporting Grupo de Conversión de Combustibles (T06_23R) and the project LMP253_21. Sara Pérez-Rodríguez thanks Grant IJC2019–041874-I funded by the MICIU/AEI/10.13039/501100011033. Manuel Gutiérrez-Roa acknowledges Universidad de Zaragoza, Fundación Ibercaja and Fundación CAI for the financial support IT 11/23 and Programa Iberus+ : Movilidad para doctorandos for his mobility grant. Simelys Hernández acknowledges the project CO2Synthesis (ID ROL: 67910) funded by Fondazione Compagnia di San Paolo in the Call Trapezio - Linea 1. Federica Zammillo and Mario Gallone thanks Fondazione CRT for the financial support., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Sulfur-doped carbon nanofibers as support for tantalum oxides bifunctional catalysts for the oxygen reduction and evolution reactions

  • Ruiz-Cornejo, Juan Carlos
  • Sebastián, David
  • Pardo, Juan Ignacio
  • Martínez-Huerta, María Victoria
  • Lázaro, María Jesús
Highly efficient, low-cost and stable bifunctional catalysts for oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) are highly desirable for the development of green electrochemical energy storage and conversion devices. Here, we report the synthesis of sulfur-doped carbon nanofibers (CNF) as support for tantalum oxide nanoparticles. Carbon nanofibers and tantalum oxides represent a durable choice for oxygen electrocatalysis, but an improvement of catalytic activity is required. Upon doping, sulfur is found to be mainly bonded to carbon as C–S–C species (more than 80%). The results show that the effective incorporation of sulfur in the support has a clear positive effect on the electroactivity of the tantalum oxide catalysts. It causes a decrease of OER/ORR overpotential of 80 mV with respect to the undoped counterpart, with special improvement in the ORR. The new catalysts have shown an interesting bifunctional behavior for the OER and ORR, as well as a good stability through time.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Bifunctional oxygen electrocatalysts based on non-critical raw materials: carbon nanostructures and iron-doped manganese oxide nanowires

  • Villanueva-Martínez, N. I.
  • Alegre, C.
  • Martínez-Visus, I.
  • Lázaro, M. J.
Alkaline metal-air batteries are unique systems for energy storage. These devices require a bifunctional catalyst in the positive electrode that must perform both the oxygen evolution and reduction reactions (OER and ORR, respectively). Generally, cobalt-based oxides are employed as air electrodes; however, cobalt is a critical raw material. Future battery devices will mandatorily need non-critical raw materials based on highly abundant metals. Here we investigate the feasibility of iron-doped manganese oxide in the form of nanowires (Fe-MONW) combined with carbon nanofibers. MnO2 is known for being active for the ORR, however its activity towards the OER is not yet fully understood. Carbon nanofibers (CNF) on the other hand, provide the necessary electrical conductivity to the catalytic system. Simple methods and economic materials are employed to synthesize the Fe-MONW/CNF composites. Our results show that there is a synergistic effect between CNF and MONW, especially for the ORR, which manifests in an increase in the number of exchanged electrons– from 2.9 to 3.5 – and a shift in the onset potential of 70 mV. Doping MONW with iron further enhances the catalytic activity, for both the ORR and OER. Fe ions generate defects in the manganese oxide structure, favoring the adsorption of oxygen and eventually enhancing the catalytic activity. Fe-doped-MONW shows onset potentials for OER comparable to the benchmark catalyst, IrO2. The improvement on the catalytic activity is particularly evident in terms of the reversibility gap, ΔE. ΔE is the difference between the potential when the current density is 10 mA cm−2 in OER and the half-wave potential for the ORR, being a fundamental parameter to assess the performance of metal-air batteries. The reversibility gap for the best catalyst, 5Fe-MONW/CNF, is ΔE = 922 mV (140 mV lower than non-doped MONW/CNF and between 160 and 320 mV lower than the individual components, MONW and CNF). Endurance tests show remarkable stability of the iron-doped MONW/CNF, with a stable potential and an even lower ΔE of 800 mV for ca. 20 h of operation (charge-discharge cycles at ± 10 mA cm−2).
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Investigation of the properties influencing the deactivation of iron electrodes in iron-air batteries

  • Villanueva-Martínez, Nicolás I.
  • Alegre, Cinthia
  • Rubín, Javier
  • Mckerracher, Rachel
  • de León, Carlos Ponce
  • Rodríguez, Horacio Antonio Figueredo
  • Lázaro, María Jesús
Iron-air batteries hold the potential to be a key technology for energy storage, thanks to their energy density, low cost, safety and abundance of their materials. In order to scale the technology up and optimize the cell formulations, it is key to obtain a clear understanding of how the physical-chemical properties of the electrode influence their electrochemical behaviour, in particular, the capacity loss. In this work, we propose for the first time mathematical correlations between textural and crystallographic properties of iron electrodes and their electrochemical stability. By adjusting synthesis parameters, we were able to tune pore size and volume, surface area and crystal size of iron oxides, and found that stability is highly correlated to both surface area and pore size. Large surface area and small average pore size provide electrodes with enhanced stability. We hypothesize that the cause for deactivation is the passivation of the electrodes ascribed to the formation of a non-conductive, non-reactive iron (II) hydroxide layer during discharge, which then cannot be reduced to iron again. We validate this hypothesis with electrochemical impedance spectroscopy studies, which show that, in the more stable electrodes, the charge transfer resistance in the Fe(OH)2 to Fe reduction does not significantly change after cycling, contrary to the behaviour of the less stable electrodes, corroborating our hypothesis. Furthermore, the electrode with the best properties was cycled 100 times, retaining almost 75% of its initial capacity at the end of the 100 cycles. These results are highly relevant for the future design and operation of iron-air batteries.