Pasar al contenido principal

CATALIZADORES Y ELECTRODOS AVANZADOS BASADOS EN MATERIAS PRIMAS NO CRITICAS PARA PILAS DE COMBUSTIBLE, ELECTROLIZADORES Y BATERIAS METAL-AIRE

PID2020-115848RB-C21

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2020
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 48
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Efecto de la relación atómica Cu:Pt en catalizadores para la reducción electroquímica de CO2

  • Gutiérrez Roa, Manuel
  • Pérez Rodríguez, Sara
  • Lascorz, L.
  • Sebastián del Río, David
  • Lázaro Elorri, María Jesús
Comunicación oral presentada en la 9ª Jornada de Jóvenes Investigadores (Química y Física) de Aragón, celebrada en Zaragoza el 16 de diciembre de 2021, y organizada por la Sección Territorial de Aragón de la Real Sociedad Española de Química y la Real Sociedad Española de Física., En los últimos años, la reducción de CO2 por vía electroquímica ha emergido como una estrategia para la obtención de compuestos de alto valor añadido (alcoholes o hidrocarburos) con aplicaciones energéticas o como moléculas plataforma para la síntesis de otros productos químicos. Si bien el CO2 es una fuente de carbono abundante, la alta estabilidad de este compuesto dificulta su conversión en otros productos, ya que implica un aporte de energía significativo. Además, la reacción de electro-reducción de CO2 (CO2RR) tiene lugar a partir de un mecanismo de reacción complejo con diferentes rutas paralelas y con múltiples etapas de transferencia de electrones. En este contexto, la utilización de catalizadores activos y selectivos que aumenten la eficiencia de la reacción y modulen la formación del producto deseado resulta primordial. Los sistemas catalíticos basados en cobre han atraído mucha atención por su tendencia única a producir hidrocarburos y alcoholes, aunque requieren de altos sobrepotenciales para activar la molécula de CO2. Una solución prometedora es el uso de catalizadores bimetálicos entre este elemento y un metal noble (Pt), de forma que el Cu regule la selectividad y el Pt reduzca el sobrepotencial. En este trabajo se estudia el efecto del ratio atómico Cu:Pt en el comportamiento electroquímico para la CO2RR de catalizadores bimetálicos soportados sobre negro de carbono (CuPt/C, 20 % de cobre en peso). La síntesis consistió en la preparación de nanopartículas de Cu/C por impregnación y reducción con NaBH4. Posteriormente, el Pt se incorporó mediante desplazamiento galvánico, generando partículas bimetálicas CuPt/C [1]. Los electrocatalizadores CuPt/C fueron analizados mediante diversas técnicas (XRD, ICP, TEM), confirmando cargas metálicas similares a las nominales, así como la correcta deposición de las nanopartículas en la superficie del material carbonoso. Por otro lado, la actividad de los catalizadores hacia la CO2RR se evaluó por voltamperometría cíclica y cronoamperometría en una celda electroquímica de tres electrodos usando una disolución acuosa de KHCO3 0,1 M como electrolito [2]. Los experimentos demostraron la adecuada actividad para la reducción de CO2 de todos los catalizadores sintetizados. Además, mediante la realización de estudios de adsorción y oxidación de CO y CO2 reducido a diferentes potenciales, se analizó la naturaleza de las especies que intervienen en la CO2RR. A mayor presencia de Pt, los catalizadores presentaron una mayor actividad para la evolución de hidrógeno y para la adsorción de especies derivadas de la reducción de CO2 (CO), mientras que la formación de formiato a partir de la CO2RR fue más favorable en fracciones atómicas Cu:Pt de 95:5 y 95:10., Los autores desean agradecer al Ministerio de Ciencia e Innovación la financiación recibida con el proyecto de referencia PID2020-115848RB-C21 y al Gobierno de Aragón por la financiación al grupo T06-20R. S. Pérez-Rodríguez agradece además al MCIN/AEI /10.13039/501100011033 por la concesión de su contrato Juan de la Cierva-Incorporación (IJC2019-041874-I)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Catalizadores basados en materiales no críticos para pilas de combustible

  • Álvarez Manuel, Laura
  • Alegre Gresa, Cinthia
  • Sebastián del Río, David
  • Lázaro Elorri, María Jesús
1 Figura, 1 Tabla.-- Resumen del póster presentado en la 9ª Jornada de Jóvenes Investigadores de Química y Física de Aragón, celebrada el 16 de diciembre de 2021, en Zaragoza., Uno de los mayores retos en la tecnología de pilas de combustible es la disminución del coste de los sistemas catalíticos mediante la sustitución de los catalizadores basados en Pt, un metal considerado crítico, por otros basados en metales de transición abundantes y económicos. Los catalizadores de Fe coordinados con nitrógeno y carbono (Fe-N-C) son los más activos para la reacción de reducción de oxígeno (ORR), la reacción limitante en las pilas de combustible [1]. En este trabajo se propone el uso de xerogeles de carbono dopados con nitrógeno como matriz carbonosa de catalizadores Fe-N-C con el objetivo de analizar el efecto del dopado con nitrógeno en la actividad de los catalizadores. Los N-CXG se han sintetizado por vía sol-gel a partir de resorcinol (R), formaldehído y urea (U), variando la relación U/R. Posteriormente, el Fe se ha introducido mediante síntesis mecánica con un molino de bolas planetario, seguido de un tratamiento a alta temperatura en atmósfera inerte [2]. Los catalizadores obtenidos, denominados como Fe-N-CXG-X (X = Ratio U/R) se han caracterizado mediante espectroscopía foto-electrónica de rayos X (XPS) y análisis elemental. La actividad hacia la ORR de los catalizadores obtenidos se ha determinado en una celda de tres electrodos con electrodo de disco rotatorio (RDE) en medio ácido. El presente estudio demuestra que la cantidad de nitrógeno del xerogel (ratio U/R) y el tipo de nitrógeno introducido, determina la actividad del catalizador hacia la ORR, puesto que condiciona la cantidad de sitios activos formados, siendo el catalizador Fe-N-CXG-1 -con mayor % de N y mayor % de este en forma de Npiridínico y grafítico-, el más activo., Los autores desean agradecer al Ministerio de Ciencia e Innovación la financiación recibida con el proyecto de referencia PID2020-115848RB-C21 y al Gobierno de Aragón por la financiación al grupo T06-20R.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Catalizadores bifuncionales como electrodos positivos de baterías hierro-aire

  • Villanueva, Nicolás
  • Alegre Gresa, Cinthia
  • Martínez Visus, Íñigo
  • Lázaro Elorri, María Jesús
1 figura.-- Resumen del póster presentado en la 9ªJornada de Jóvenes Investigadores de Química y Física de Aragón, celebrada en Zaragoza el 16 de diciembre de 2021., Las baterías hierro-aire son sistemas prometedores para el almacenamiento de energía. Entre sus ventajas destaca su bajo impacto ambiental y coste, la alta disponibilidad de sus materias primas y su elevada energía específica teórica, 765 Wh/kgFe [1]. En el electrodo positivo de estas baterías se realiza, durante la carga, la reacción de evolución de oxígeno (OER) y, durante la descarga, la reacción de reducción de oxígeno (ORR). Estas reacciones son lentas, por lo que requieren de un catalizador que sea capaz de llevar a cabo ambas reacciones (bifuncional). En este trabajo se estudian composites de nanofilamentos de dióxido de manganeso dopados con hierro (Fe- MONW) y nanofibras de carbono (CNF) como catalizadores bifuncionales. Los MONW se obtuvieron por un método hidrotermal y las CNF mediante descomposición catalítica de metano; posteriormente se mezclaron mecánicamente en un molino de bolas (Fe-MONW/CNF). La actividad electroquímica de los catalizadores se evaluó en una celda de tres electrodos con un electrodo de disco rotatorio (RDE). Los nanofilamentos son de fase cristalina α-MnO2, que ha mostrado ser la más activa para la ORR y la OER, y tienen un área cercana a los 25 m /g, con diámetros que se aproximan a los 100 nm. Las nanofibras tienen estructura fishbone, con diámetros de aproximadamente 60-90 nm y áreas superficiales de 90 m /g. Los composites mostraron mayor actividad catalítica tanto para la ORR como para para la OER que las nanofibras y que los nanofilamentos por separado (Figura 1), así como mayor actividad que el catalizador comercial para la OER (IrO2)., Los autores agradecen la financiación del proyecto PID2020-115848RB-C21 del Ministerio de Ciencia e Innovación y al Grupo DGA T06-20R. N. Villanueva agradece al Gobierno de Aragón su contrato pre- doctoral. ________________
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Materiales compuestos de nanoestructuras de carbono y nanofilamentos de manganeso como electrocatalizadores bifuncionales de oxígeno

  • Villanueva, Nicolás
  • Alegre Gresa, Cinthia
  • Orozco, Nataly
  • Lázaro Elorri, María Jesús
1 figura.-- Resumen de la comunicación oral presentada en la XV Reunión del Grupo Español del Carbón, 24-27 abril 2022, Granada (España).-- O37.-- D.L. GR 695-2022, Las baterías hierro-aire son sistemas prometedores para el almacenamiento de energía, debido a su bajo coste, seguridad y elevadas energías específicas. Estas baterías constan de un electrodo negativo, donde ocurre la oxidación y reducción del hierro, y un electrodo positivo (o electrodo de aire), donde ocurren la evolución (OER) y reducción (ORR) de oxígeno. Estas reacciones, al ser lentas, requieren de la presencia de un catalizador bifuncional. Los óxidos de manganeso son catalizadores activos para estas reacciones, pero son poco conductores. En este trabajo se propone la síntesis de materiales compuestos de nanoestructuras de carbono - nanofibras de carbono (CNF), nanotubos de carbono (CNT) y óxido de grafeno reducido (rGO) - y de dióxido de manganeso (MONW), que se probaron como electrocatalizadores bifuncionales de oxígeno., Los autores agradecen al Ministerio de Ciencia e Innovación de España y a la AEI (MICIN/AEI/10.13039/501100011033) por la financiación recibida en relación al proyecto PID2020-115848RB-C21, así como al Gobierno de Aragón por la financiación al grupo T06-20R y a la beca predoctoral del Sr. Villanueva., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

En busca de electrocatalizadores más sostenibles: composites de cobre y carbón dopado con nitrógeno para la reacción de reducción de oxígeno

  • Cebollada Borao, Jesús
  • Lázaro Elorri, María Jesús
  • Sebastián del Río, David
  • Martínez Huerta, M. Victoria
2 figuras.-- Resumen de la comunicación oral presentada en la XV Reunión del Grupo Español del Carbón, 24-27 abril 2022, Granada (España).-- O38.-- D.L. GR 695-2022, Las pilas de combustible de membrana polimérica son una de las opciones más prometedoras para la conversión fiable y eficiente de energía limpia que van a ejercer un papel fundamental en la nueva transición energética del siglo XXI. Sin embargo, uno de los mayores obstáculos que presentan estos dispositivos es la relativa baja actividad de la reacción de reducción de oxígeno (ORR) que tiene lugar en el cátodo, y el alto coste de los catalizadores basados principalmente en Pt. El objetivo de este trabajo es la elaboración de electrocatalizadores sostenibles y competitivos en la reacción de reducción de oxígeno (ORR) para una pila de combustible de membrana polimérica intercambiadora de aniones. Para ello se han preparado composites formados por una matriz carbonosa dopada con nitrógeno y utilizando el Cu como metal activo. Este tipo de catalizadores ha sido poco estudiado en la bibliografía en comparación con otros metales, que cada vez están más cotizados para otros fines y que proceden de cadenas de suministro cuestionables en países subdesarrollados., Los autores quieren agradecer la ayuda PID2020-115848RB-C21 y PID2020-115848RB-C22 financiadas por MCIN/AEI/10.13039/501100011033. Además J. Cebollada quiere agradecer la ayuda PRE2018-084842 financiada por MCIN/AEI/10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Influencia del soporte carbonoso en catalizadores CuPt para la electro-reducción de CO2

  • Gutiérrez Roa, Manuel
  • Pérez Rodríguez, Sara
  • Lascorz, L.
  • Fantova, Miguel
  • Sebastián del Río, David
  • Lázaro Elorri, María Jesús
Resumen de la comunicación oral presentada en la XV Reunión del Grupo Español del Carbón, 24-27 abril 2022, Granada (España).-- O51.-- D.L. GR 695-2022, Actualmente, el dióxido de carbono (CO2) es uno de los gases de mayor contribución al calentamiento global, lo que impolica la necesidad de realizar grandes esfuerzos para descarbonizar el sector energético en particular y la economía en general. En este escenario de transición, la reacción de electro-reducción de CO2 (CO2RR) se presenta como una tecnología prometedora para la utilización de corrientes concentradas de CO2 con el fin de producir productos químicos e industriales de alto valor añadido, como alcoholes o hidrocarburos, utilizando electricidad renovable como fuente energética. Sin embargo, la alta estabilidad de la modécula de CO2 bajo condiciones ambientales implica un elevado aporte de energía para producir cantidades razonables de productos finales. Además, la CO2RR tiene lugar involucrando un complejo mecanismo de reacción con diferentes rutas paralelas y múltiples etapas de transferencia de electrones, compitiendo a su vez con la reacción de evolución de hidrógeno (HER), lo que limita el proceso. Por todo esto, el diseño de catalizadores estables, eficientes y selectivos para la reducción de CO2 es actualmente uno de los principales retos de esta tecnología. Una solución prometedora es el uso de catalizadores bimetálicos combinando un metal noble (Pt), con el fin de reducir el sobrepotencial de la reacción, y cobre (Cu), que regula la selectividad hacia la formación de hidrocarburos y alcoholes. Además, la dispersión de la fase activa en un soporte con adecuada textura y química superficial mejora la utilización del metal, reduciendo por tanto el coste de los electrodos. Este trabajo estudia el efecto del soporte carbonoso para la CO2RR en catalizadores bimetálicos CuPt/C (20% en peso de cobre y ratio atómico Cu:Pt de 95:5). Como soportes carbonosos se utilizaron xerogeles de carbono (CXG), óxidos de grafeno reducido (RGO), carbones mesoporosos ordenados (OMC) y un negro de carbono comercial (Vulcan XC-72R)., Los autores desean agradecer al Ministerio de Ciencia e Innovación y a la Agencia Estatal de Investigación (MCIN/AEI/10.13039/501100011033) la financiación recibida con el proyecto de referencia PID2020-115848RB-C21 y al Gobierno de Aragón por la financiación al grupo T06-20R. S. Pérez Rodríguez agradece también al MCIN/AEI por la concesión de su contrato Juan de la Cierva-Incorporación (IJC2019-041874-I)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Catalizadores bifuncionales basados en grafeno dopado con N y modificados con titanio y cobalto para pilas de combustible regenerativas en una unidad

  • Luque-Centeno, José Manuel
  • Martínez Huerta, M. Victoria
  • Sebastián del Río, David
  • Baglio, Vincenzo
  • Lázaro Elorri, María Jesús
1 figura.-- Resumen de la comunicación oral presentada en la XV Reunión del Grupo Español del Carbón, 24-27 abril 2022, Granada (España).-- O58.-- D.L. GR 695-2022, Las pilas de combustible regenerativas en celda unidad (URFC) están llamadas a tener un papel importante en el diseño de nuevos planes energéticos que permitan abandonar el uso de combustibles fósiles. Sin embargo, esta tecnología se encuentra limitada por la baja cinética de las reacciones que ocurren en el electrodo de oxígeno (reacciones de evolución (OER) y reducción (ORR) de oxígeno) y del alto coste de los catalizadores empleados en su operación. Una forma de incrementar la cinética de estas reacciones es el uso de electrolitos alcalinos. Este tipo de medio disminuye la corrosión de los materiales empleados como catalizadores, permitiendo el uso de metales no nobles, así como soportes basados en carbono. El objetivo de este trabajo es la síntesis de materiales nanoestructurados, basados en criogeles de grafeno dopados con nitrógeno y nanopartículas metálicas de Ti y Co, y el estudio de su actividad como catalizadores para la ORR y la OER en medio alcalino., Los autores desean agradecer al Minsiterio de Ciencia e Innovación y a la Agencia Estatal de Investigación (MCIN/AEI/10.13039/501100011033) la financiación recibida con los proyectos de investigación PID2020-115848RB-C21 y PID2020-115848RB-C22., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Catalizadores basados en tantalio y nanofibras de carbono para electrodos bifuncionales de oxígeno

  • Ruiz Cornejo, Juan Carlos
  • Sebastián del Río, David
  • Martínez Huerta, M. Victoria
  • Lázaro Elorri, María Jesús
1 figura.--Resumen de la comunicación presentada en la XV Reunión del Grupo Español del Carbón, 24-27 abril 2022, Granada (España).-- C-50.-- D.L. GR 695-2022, Las reacciones de reducción y de evolución de oxígeno (ORR, OER) son de especial interés en el desarrollo de dispositivos energéticos como pilas de combustible regenerativas o baterías metal-aire. El diseño de catalizadores bifuncionales capaces de catalizar eficientemente ambas reacciones es un tema de gran actualidad. Algunos óxidos metálicos de los grupos IV y V de la tabla periódica, como el tantalio, son catalíticamente activos y además presentan una muy buena estabilidad, pero su conductividad eléctrica y su área superficial son generalmente muy bajas. En este trabajo se ha investigado la utilización de nanofibras de carbono como soporte de óxidos de tantalio para mejorar dichas características., Los autores desean agradecer al Ministerio de Ciencia e Innovación y a la Agencia Estatal de Investigación (MCIN/AEI/10.13039/501100011033) la financiación recibida con los proyectos de investigación PID2020-115848RB-C21 y PID2020-115848RB-C22. También agradecen al Gobierno de Aragón la financiación al grupo T06-20R. J.C.R. agradece a Gobierno de Aragón la financiación de su contrato predoctoral., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Catalizadores CuPt/C para la electro-reducción de CO2: optimización de la ruta de síntesis

  • Pérez Rodríguez, Sara
  • Gutiérrez Roa, Manuel
  • Lascorz, L.
  • Sebastián del Río, David
  • Lázaro Elorri, María Jesús
1 figura.-- Resumen de la comunicación presentada en la XV Reunión del Grupo Español del Carbón, 24-27 abril 2022, Granada (España).-- C-51.-- D.L. GR 695-2022, La reacción elctroquímica de reducción de dióxido de carbono (CO2RR) representa una tecnología atractiva de almacenamiento de energía renovable (intermitente) en combustibles químicos y otras materias primas. En este proceso, el CO2 es reducido en la superficie de un catalizador y, por ende, la naturaleza de la fase activa resulta clave en la actividad/selectividad de la reacción. Entre los diferentes sistemas catalíticos estudiados, aquellos basados en cobre han despertado un gran interés por su tendencia única para producir hidrocarburos y alcoholes. Sin embargo, la mayoría de los electrodos reportados presentan una baja eficiencia energética y selectividad, lo que desalienta su implementación a nivel industrial. Recientemente, la alteración del entorno químico del cobre con un metal noble se ha propuesto como una estrategia prometedora para reducir el sobrepotencial de reacción y favorecer la CO2RR., Este trabajo se centra en la reducción electroquímica de CO2 usando catalizadores CuPt soportados en un negro de carbono comercial (CuPt/C, 20% en peso de cobre). Los catalizadores se sintetizaron variando el pH y con diferentes relaciones atómicas Cu:Pt, con el fin de estudiar su influencia en la actividad y selectividad hacia la CO2RR., Los autores desean agradecer al Ministerio de Ciencia e Innovación y a la Agencia Estatal de Investigación (MCIN/AEI/10.13039/501100011033) la financiación recibida con el proyecto de referencia PID2020-115848RB-C21 y al Gobierno de Aragón por la financiación al grupo T06-20R. S. Pérez-Rodríguez agradece también al MCIN/AEI por la concesión de su contrato Juan de la Cierva-Incorporación (IJC2019-041874-I)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Transformation of CoFe2O4 spinel structure into active and robust CoFe alloy/N-doped carbon electrocatalyst for oxygen evolution reaction

  • Gebreslase, Gebrehiwet Abrham
  • Martínez Huerta, M. Victoria
  • Sebastián del Río, David
  • Lázaro Elorri, María Jesús
11 figures, 2 tables.-- Supplementary information available., Electrochemical water splitting is an environmentally benign technology employed for H2 production; however, it is critically hampered by the sluggish kinetics of the oxygen evolution reaction (OER) at the positive electrode. In this work, nitrogen-doped carbon-coated CoFe electrocatalysts were synthesized via a three-step route comprising (1) hydrothermal reaction, (2) in-situ polymerization of dopamine and (3) carbonization. The effect of carbonized polydopamine on the overall physicochemical properties and electrochemical activity of CoFe catalysts was systematically studied. By controlling and optimizing the ratio of CoFe2O4 and dopamine contents, a transformation of the CoFe2O4 structure to CoFe alloy was observed. It was found that CoFe/NC30% (prepared with 30% dopamine) exhibits an excellent catalytic activity towards OER. A small overpotential of 340 mV was required to generate a current density of 10 mA cm-2 in a 1.0 M KOH electrolyte. More importantly, the CoFe/NC30% catalyst reflected exceptional durability for at least 24 h. This research sheds light on the development of affordable, highly efficient, and durable electrocatalysts for OER., Financial support from the European Union's Horizon 2020 Research and Innovation programme under the Marie Skłodowska-Curie Actions-Innovative Training Networks (MSCA-ITN) Grant Agreement 813748 are gratefully acknowledged. The authors wish to acknowledge the grants PID2020-115848RB-C21 and PID2020-115848RB-C22 funded by MCIN/AEI/10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Effect of nitrogen doping method on the activity of Fe-N-C catalysts based on carbon xerogels for fuel cells

  • Álvarez Manuel, Laura
  • Alegre Gresa, Cinthia
  • Napal, Pedro F.
  • Sebastián del Río, David
  • Lázaro Elorri, María Jesús
3 figures, 1 table.-- Work presented at the EHEC 2022, European Hydrogen Energy Conference, 18-20 May, 2022. Madrid, Spain., The development of active and inexpensive non-precious metal catalysts is a necessary and essential requirement to replace currently used Pt-based catalysts, in order to reduce the cost of polymer electrolyte fuel cells(PEFC). [1] Catalysts based on the Fe-N-C structure develop high electroactivity towards the oxygen reduction reaction (ORR), the limiting reactionin fuel cells. To increase the catalysts activity, Fe must be dispersedin acarbon material with a high surfacearea.In this context, carbon xerogels are excellent candidates, as their main properties can be easily tailored: porosity, electrical conductivity and surface chemistry. [2] The meso/macroporosity of carbon xerogels can be designed by modifying the conditions of the synthesis process, while microporosity can be generated by subsequent carbonization/activation treatments [3].In the present work, on the basis of carbon xerogels with an optimal ratio of micro/meso/macroporosity, we investigate the effect of two different methods of nitrogen-doping in the catalytic activity of Fe-N-C catalysts. Catalysts are evaluated both in half-cell and single-cell configurations and their activity is correlated to their physical-chemical features., The authors wish to thank the Ministry of Science and Innovation and the AEI(MCIN/AEI/10.13039/501100011033) for the funding received with the reference project PID2020-115848RB-C21 and the Government of Aragon for funding the T06-20R group. L. Álvarez-Manuel wish to thank the Government of Aragon for her pre-doctoral contract., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Effect of transition metals on the electrocatalytic activity of N-doped carbon composites derived from polydopamine for oxygen evolution and oxygen reduction reactions

  • Cebollada Borao, Jesús
  • Sebastián del Río, David
  • Lázaro Elorri, María Jesús
  • Martínez Huerta, M. Victoria
4 figures.-- Work presented at the EHEC 2022, European Hydrogen Energy Conference 18-20 May, 2022. Madrid, Spain., In recent years, renewable energies have played an essential role in the technological development to meet energy demand and replace fossil fuels. At the same time, new challenges have arisen in order to implement clean energy production. The problem to store renewable energy that is obtained intermittently in the long term has led the development of fuel cells, electrolyzers and unitized regenerative fuel cells (URFC) to use hydrogen as an energy vector. URFCs can be used for both electric power production and hydrogen generation by adapting to the energy needs of the power grid. The most recent studies using an anion exchange membrane as electrolyte have opened up a range of possibilities for synthesizing new catalysts by replacing noble metals such as Pt, Ir or Ru with cheaper transition metals in combination with N-doped carbon structures [1] This work focuses on the development of noble metal-free bifunctional electrocatalysts for the oxygen electrode of unitized regenerative alkaline fuel cell (UR-AFC), where oxygen evolution (OER) and reduction (ORR) reactions take place [2]. Composites based on non-precious metals such as Ti, Mn, Fe, Co, Ni or Zn, and nitrogen-doped carbonaceous nanostructures obtained from polydopamine have been prepared., The authors wish to acknowledge the grants PID2020-115848RB-C21 and PID2020-115848RB-C22 funded by MCIN/AEI/10.13039/501100011033. J. Cebollada also thanks the grant PRE2018-084842 funded by MCIN/AEI/10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Sulfur-doped carbon nanofibers as support for tantalum oxides bifunctional catalysts for the oxygen reduction and evolution reactions

  • Ruiz Cornejo, Juan Carlos
  • Sebastián del Río, David
  • Pardo, Juan Ignacio
  • Martínez Huerta, M. Victoria
  • Lázaro Elorri, María Jesús
10 figures, 7 tables.-- Supplementary information available., Highly efficient, low-cost and stable bifunctional catalysts for oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) are highly desirable for the development of green electrochemical energy storage and conversion devices. Here, we report the synthesis of sulfur-doped carbon nanofibers (CNF) as support for tantalum oxide nanoparticles. Carbon nanofibers and tantalum oxides represent a durable choice for oxygen electrocatalysis, but an improvement of catalytic activity is required. Upon doping, sulfur is found to be mainly bonded to carbon as C–S–C species (more than 80%). The results show that the effective incorporation of sulfur in the support has a clear positive effect on the electroactivity of the tantalum oxide catalysts. It causes a decrease of OER/ORR overpotential of 80 mV with respect to the undoped counterpart, with special improvement in the ORR. The new catalysts have shown an interesting bifunctional behavior for the OER and ORR, as well as a good stability through time., The authors wish to acknowledge the grants PID2020-115848RB-C21 and PID2020-115848RB-C22 funded by MCIN/AEI/10.13039/501100011033, and to the Gobierno de Aragón (DGA) for the funding to Grupo de Conversión de Combustibles (T06_17R). J.C. Ruiz-Cornejo acknowledges also DGA for his PhD grant., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

NiCoP/CoP sponge-like structure grown on stainless steel mesh as a high-performance electrocatalyst for hydrogen evolution reaction

  • Gebreslase, Gebrehiwet Abrham
  • Martínez Huerta, M. Victoria
  • Sebastián del Río, David
  • Lázaro Elorri, María Jesús
8 figures, 2 tables.-- Supplementary information available., The stainless steel mesh (SSM) has received remarkable attention for hydrogen and oxygen evolution reactions. It was demonstrated that the SSM exhibits admirable performance towards oxygen evolution reaction (OER) electrocatalysis, while its catalytic activity for hydrogen evolution reaction (HER) remains quite low. This obstructs the utilization of SSM-based catalysts for sustainable complete water electrolysis. In this study, a facile hydrothermal route followed by a phosphorization process was adopted to transform commercially available SSM materials into high-performance and stable electrocatalysts for alkaline HER. We report an interconnected NiCoP-CoP sponge-like structure on SSM substrate without polymer binder. Benefiting from the 3D construction with high exposed surface area, close contact between electroactive species and conductive surface, and facilitated infiltration of electrolyte, the as-prepared NiCoP@SSM electrocatalyst brought an improved catalytic activity for HER, required a low overpotential of 138 mV to derive a current density of 10 mAcm−2 in 1.0 M KOH aqueous solution. The high performance of the NiCoP@SSM catalyst has also unveiled fast reaction kinetics (presents a small Tafel slope of 74 mV/dec), a relatively large electrochemical active surface area (ECSA), and small charge transfer resistance. Furthermore, the NiCoP@SSM electrode also presented excellent stability during long-term measurements, making it one of the most encouraging HER electrodes to date. This research study paves the way for the development of HER-active electrocatalysts made from SSMs that are commercially available, low-cost, and highly active., The authors wish to acknowledge the grants PID2020-115848RB-C21 and PID2020-115848RB-C22 funded by MCIN/AEI/10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Bifunctional oxygen electrocatalysts based on non-critical raw materials: Carbon nanostructures and iron-doped manganese oxide nanowires

  • Villanueva, Nicolás
  • Alegre Gresa, Cinthia
  • Martínez-Visus, Iñigo
  • Lázaro Elorri, María Jesús
10 figures, 6 tables.-- Supplementary information available., Alkaline metal-air batteries are unique systems for energy storage. These devices require a bifunctional catalyst in the positive electrode that must perform both the oxygen evolution and reduction reactions (OER and ORR, respectively). Generally, cobalt-based oxides are employed as air electrodes; however, cobalt is a critical raw material. Future battery devices will mandatorily need non-critical raw materials based on highly abundant metals. Here we investigate the feasibility of iron-doped manganese oxide in the form of nanowires (Fe-MONW) combined with carbon nanofibers. MnO2 is known for being active for the ORR, however its activity towards the OER is not yet fully understood. Carbon nanofibers (CNF) on the other hand, provide the necessary electrical conductivity to the catalytic system. Simple methods and economic materials are employed to synthesize the Fe-MONW/CNF composites. Our results show that there is a synergistic effect between CNF and MONW, especially for the ORR, which manifests in an increase in the number of exchanged electrons– from 2.9 to 3.5 – and a shift in the onset potential of 70 mV. Doping MONW with iron further enhances the catalytic activity, for both the ORR and OER. Fe ions generate defects in the manganese oxide structure, favoring the adsorption of oxygen and eventually enhancing the catalytic activity. Fe-doped-MONW shows onset potentials for OER comparable to the benchmark catalyst, IrO2. The improvement on the catalytic activity is particularly evident in terms of the reversibility gap, ΔE. ΔE is the difference between the potential when the current density is 10 mA cm−2 in OER and the half-wave potential for the ORR, being a fundamental parameter to assess the performance of metal-air batteries. The reversibility gap for the best catalyst, 5Fe-MONW/CNF, is ΔE = 922 mV (140 mV lower than non-doped MONW/CNF and between 160 and 320 mV lower than the individual components, MONW and CNF). Endurance tests show remarkable stability of the iron-doped MONW/CNF, with a stable potential and an even lower ΔE of 800 mV for ca. 20 h of operation (charge-discharge cycles at ± 10 mA cm−2)., The authors wish to acknowledge the grant PID2020-115848RB-C21 funded by MCIN/AEI/10.13039/501100011033. Authors also acknowledge Gobierno de Aragón (DGA) for the financial support to Grupo de Conversión de Combustibles (T06_20R). N. Villanueva-Martínez also acknowledges DGA for his pre-doctoral contract., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

N-doped carbon xerogels from urea-resorcinol-formaldehyde as carbon matrix for Fe-N-C catalysts for oxygen reduction in fuel cells

  • Álvarez Manuel, Laura
  • Alegre Gresa, Cinthia
  • Sebastián del Río, David
  • Eizaguirre, Alberto
  • Napal, Pedro F.
  • Lázaro Elorri, María Jesús
9 figures, 5 tables. Supplementary material available., Platinum group metal-free catalysts have been intensively investigated in the last decades as an alternative to platinum with the aim of lowering the cost of polymer electrolyte fuel cells. In particular, iron-nitrogen-carbon (Fe-N-C) has proved to be the most active towards the oxygen reduction reaction. For practical application, a hierarchical pore structure is required, with micropores favouring the creation of active sites and larger pores (meso- and macropores) facilitating the mass transport. In this work, carbon xerogels are investigated to hosting iron and nitrogen species obtained by a template-free method. The introduction of nitrogen in a one-step polymerization of urea with resorcinol and formaldehyde is investigated for the first time in this field by varying the relative content of reactants. The urea/resorcinol ratio greatly influences the pore structure of the Fe-N-C catalyst and the ORR electrocatalytic activity thereof. The ORR activity is favored for a balanced urea/resorcinol ratio where porosity is well developed and relatively high iron and nitrogen contents are incorporated to the carbon xerogel. In acid (0.5 M H2SO4), the onset potential is 0.82 V vs. RHE, with a number of exchanged electrons very close to 4 (i.e. full conversion to water) and low Tafel slope of 71 mV dec−1, for the most active catalyst of the series, possessing the best compromise of iron and nitrogen active sites. Fuel cell tests corroborate that the catalyst with the most developed porous structure shows the best performance., The authors wish to acknowledge the grant PID2020-115848RB-C21 funded by MCIN/AEI/10.13039/501100011033. Authors also acknowledge Gobierno de Aragón (DGA) for the financial support to Grupo de Conversión de Combustibles (T06_20R). L. Álvarez acknowledges also DGA for her pre-doctoral contract., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Carbonized polydopamine-based nanocomposites: The effect of transition metals on the oxygen electrocatalytic activity

  • Cebollada Borao, Jesús
  • Sebastián del Río, David
  • Lázaro Elorri, María Jesús
  • Martínez Huerta, M. Victoria
12 figues, 2 tables.-- Supplementary information available.-- This article belongs to the Special Issue Application of Porous Nanomaterials in Energy Storage and Catalysis, The electrochemical oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) are the most critical processes in renewable energy-related technologies, such as fuel cells, water electrolyzers, and unitized regenerative fuel cells. N-doped carbon composites have been demonstrated to be promising ORR/OER catalyst candidates because of their excellent electrical properties, tunable pore structure, and environmental compatibility. In this study, we prepared porous N-doped carbon nanocomposites (NC) by combining mussel-inspired polydopamine (PDA) chemistry and transition metals using a solvothermal carbonization strategy. The complexation between dopamine catechol groups and transition metal ions (Fe, Ni, Co, Zn, Mn, Cu, and Ti) results in hybrid structures with embedded metal nanoparticles converted to metal–NC composites after the carbonization process. The influence of the transition metals on the structural, morphological, and electrochemical properties was analyzed in detail. Among them, Cu, Co, Mn, and Fe N-doped carbon nanocomposites exhibit efficient catalytic activity and excellent stability toward ORR. This method improves the homogeneous distribution of the catalytically active sites. The metal nanoparticles in reduced (MnO, Fe3C) or metallic (Cu, Co) oxidation states are protected by the N-doped carbon layers, thus further enhancing the ORR performance of the composites. Still, only Co nanocomposite is also effective toward OER with a potential bifunctional gap (ΔE) of 0.867 V. The formation of Co-N active sites during the carbonization process, and the strong coupling between Co nanoparticles and the N-doped carbon layer could promote the formation of defects and the interfacial electron transfer between the catalyst surface, and the reaction intermediates, increasing the bifunctional ORR/OER performance., This research was funded by MCIN/AEI/10.13039/501100011033, grant number PID2020-115848RB-C21 and PID2020-115848RB-C22., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Organic xerogels combined with iron and nitrogen as PGM-free catalysts for the oxygen reduction reaction

  • Álvarez Manuel, Laura
  • Alegre Gresa, Cinthia
  • Sebastián del Río, David
  • Lázaro Elorri, María Jesús
6 figures, 11 tables.-- Supplementary information available., Platinum-group-metal free catalysts have been widely studied in the last decade as an alternative to Pt, employed in fuel cells. Several carbon precursors have been investigated as carbon matrix for iron-nitrogen-carbon (Fe–N–C) catalysts, characterized by a large amount of micropores, fundamental to create Fe-Nx-C active sites. Nonetheless, it is also acknowledged that wider pores are needed to facilitate mass transfer of oxygen/water (reagent/product of fuel cells) towards/from the active sites. Organic xerogels are known as easily tunable materials, that allow doping with a variety of heteroatoms. The present manuscript presents an investigation on the use of organic xerogels combined with iron and nitrogen in a single-step to obtain Fe–N-CXG electro-catalysts for the oxygen reduction reaction (ORR) of proton exchange membrane fuel cells. Several features of both organic xerogels and catalysts on the ORR activity are assessed: the textural properties of the organic xerogel, the iron loading of the Fe–N–C catalysts and the effect of acid-leaching of the catalysts. The present study proves the feasibility of using organic xerogels as carbon precursor to obtain PGM-free catalysts in an easy manner and scalable single-step synthesis. Catalysts obtained from organic xerogels synthesized at mildly acid pHs (5.8 and 6), with a nominal iron loading of 2 wt%, and subjected to two sets of acid leaching/thermal treatments, present enhanced catalytic activity towards the ORR., The authors wish to acknowledge the grant PID2020-115848RB-C21 funded by MCIN/AEI/10.13039/501100011033. Authors also acknowledge Gobierno de Aragón (DGA) for the financial support to Grupo de Conversión de Combustibles (T06_20R). L. Álvarez acknowledges also DGA for her pre-doctoral contract., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Supporting Information for Transformation of CoFe2O4 spinel structure into active and robust CoFe alloy/N-doped carbon electrocatalyst for oxygen evolution reaction [Dataset]

  • Gebreslase, Gebrehiwet Abrham
  • Martínez Huerta, M. Victoria
  • Sebastián del Río, David
  • Lázaro Elorri, María Jesús
Under a Creative Commons license CC-BY 4.0, Figure S 1. SEM images of (a) CoFe/NC10% , (b) CoFe/NC20% , and (c) CoFe/NC40%. Figure S 2.TEM images of (a) CoFe/NC10% , (b) CoFe/NC20% , and (c) CoFe/NC40%. Figure S 3. Particle size distribution of the various electrocatalyst: (a) CoFe2O4, (b) CoFe/NC10% , (c) CoFe/NC20% ,(d) CoFe/NC30% , and (e) CoFe/NC40% . Table S 1. Amount of CoFe alloys and oxides in the composite samples, determined from the XRD analysis. Figure S 4. XPS high resolution spectra of (a) Fe 2p, (b) Co 2p, for all electrocatalysts. Table S 2. XPS analysis results of the electrocatalysts. Table S 3. Elemental composition of the prepared electrocatalysts. Table S 4. Specific capacitance and ECSA values for the various eletrocataysts. Table S 5. Charge transfer resistance (Rct) and solution resistance (Rs) determined from EIS measurement. Figure S 5. ECSA-normalized polarization curve., Financial support from the European Union's Horizon 2020 Research and Innovation programme under the Marie Skłodowska-Curie Actions-Innovative Training Networks (MSCA-ITN) Grant Agreement 813748 are gratefully acknowledged. The authors wish to acknowledge the grants PID2020-115848RB-C21 and PID2020-115848RB-C22 funded by MCIN/AEI/10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Investigation of the properties influencing the deactivation of iron electrodes in iron-air batteries

  • Villanueva, Nicolás
  • Alegre Gresa, Cinthia
  • Rubín, Javier
  • McKerracher, Rachel
  • Ponce de León, Carlos
  • Figueredo-Rodríguez, H. A.
  • Lázaro Elorri, María Jesús
8 figures, 6 tables.-- Supplementary information available., Iron-air batteries hold the potential to be a key technology for energy storage, thanks to their energy density, low cost, safety and abundance of their materials. In order to scale the technology up and optimize the cell formulations, it is key to obtain a clear understanding of how the physical-chemical properties of the electrode influence their electrochemical behaviour, in particular, the capacity loss. In this work, we propose for the first time mathematical correlations between textural and crystallographic properties of iron electrodes and their electrochemical stability. By adjusting synthesis parameters, we were able to tune pore size and volume, surface area and crystal size of iron oxides, and found that stability is highly correlated to both surface area and pore size. Large surface area and small average pore size provide electrodes with enhanced stability. We hypothesize that the cause for deactivation is the passivation of the electrodes ascribed to the formation of a non-conductive, non-reactive iron (II) hydroxide layer during discharge, which then cannot be reduced to iron again. We validate this hypothesis with electrochemical impedance spectroscopy studies, which show that, in the more stable electrodes, the charge transfer resistance in the Fe(OH)2 to Fe reduction does not significantly change after cycling, contrary to the behaviour of the less stable electrodes, corroborating our hypothesis. Furthermore, the electrode with the best properties was cycled 100 times, retaining almost 75% of its initial capacity at the end of the 100 cycles. These results are highly relevant for the future design and operation of iron-air batteries., The authors wish to acknowledge Ministerio de Ciencia e Innovación and Agencia Estatal de Investigación (MCIN/AEI/10.13039/501100011033) for the PID2020-115848RB-C21 grant. The authors also thank the European Union and the NextGeneration EU program for the funding on grant TED2021-130279A-I00. Authors also acknowledge Gobierno de Aragón (DGA) for the financial support to Grupo de Conversión de Combustibles (T06_20R). N. Villanueva acknowledges also DGA for his pre-doctoral contract., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Appendix. Supplementary materials for Investigation of the properties influencing the deactivation of iron electrodes in iron-air batteries [Dataset]

  • Villanueva, Nicolás
  • Alegre Gresa, Cinthia
  • Rubín, Javier
  • McKerracher, Rachel
  • Ponce de León, Carlos
  • Figueredo-Rodríguez, H. A.
  • Lázaro Elorri, María Jesús
S1.- Electrode manufacturing scheme: Figure S1. Scheme of the process of electrode manufacturing. S2.- Mössbauer spectroscopy: Figure S2. Mössbauer effect spectra of the studied iron oxides with fitted components and distribution of doublets and sextets as explained in the manuscript. Table S1. Fitted parameters of the Mössbauer spectra using WinNormos software. Isomer shifts (δ) given with respect to α-Fe. Errors in brackets. For distributions, the average value of δ is given. Max1 and max2 indicate the maxima in the distribution values of quadrupole splitting ∆ (doublets) or hyperfine field Bhf (sextets). S3.- Determination of crystallite size: The size of the crystallites of each phase, hematite and maghemite, was determined as follows. The powder-diffractograms were fitted by the Rietveld method using FullProf software. In the fits we used the Thompson-Cox-Hastings (TCH) pseudo-Voigt shape for reflections. Instead of the full width of the reflection and pseudo-Voigt mixing parameter, the parametrization of the TCH pseudo-Voigt function allows to calculate the Gaussian and Lorentzian widths, which can be readily identified with crystallite-size effects, microstrains and instrumental resolution broadening. The integral breadth corresponding to size effects finally gives the crystallite size through the Scherrer formula, thus excluding contributions from the instrumental resolution. No strain contribution to the reflections broadening was considered in the present case. Table S2. Relative molar fractions of iron in hematite and maghemite in %, assuming identical recoilless fractions for both oxides. The values for Fe2O3-TAR-N2 were obtained by fitting the distribution of hyperfine values above 45 T with two Gaussians. The area of the Gaussian centered at ≈51 T yields the contribution of hematite; the rest of the distribution is then assigned to maghemite. S4.- Nitrogen physisorption: Figure S3. Nitrogen physisorption isotherms at 77 K over a) Fe2O3-TAR-air and S-Fe2O3-TAR-air, b) Fe2O3-TAR-N2 and S-Fe2O3-TAR-N2, and c) Fe2O3-SHX-air. S5.- XPS spectra: Figure S4. XPS spectra of samples: a) Fe2O3-TAR-air, b) S-Fe2O3-TAR-air, c) Fe2O3-TAR-N2, d) S-Fe2O3-TAR-N2, and e) Fe2O3-SHX-air. Carbon percentages are overestimated because of adventitious carbon. Figure S5. XPS spectra of orbitals Fe2p (left) and S2p (right) of samples: a) S-Fe2O3-TAR-air, and b) S-Fe2O3-TAR-N2. Figure S6. XPS spectra of orbital O1s of samples: a) Fe2O3-TAR-air, b) S-Fe2O3-TAR-air, c) Fe2O3-TAR-N2, d) S-Fe2O3-TAR-N2, and e) Fe2O3-SHX-air. S6.- FESEM and TEM/STEM images of the iron oxides: Figure S7. FESEM micrographs at 50k magnification of iron oxides a) Fe2O3-TAR-air, b) S-Fe2O3-TAR-air, c) Fe2O3-TAR-N2, d) S-Fe2O3-TAR-N2, and e) Fe2O3-SHX-air. Figure S8. TEM micrographs of iron oxides a) Fe2O3-TAR-air, b) S-Fe2O3-TAR-air. STEM images for c) Fe2O3-TAR-air, d) S-Fe2O3-TAR-air. S7.- Electrochemical reactions on the electrodes and electrodes deactivation During charge (dotted lines), all of the composites show a first plateau at around -0.95 V vs Hg|HgO, associated to the reduction of iron (III) to iron (II), and a second longer plateau where both the reduction of iron (II) to metallic iron and the HER take place at -1.18 V vs Hg|HgO. When discharging (solid lines), the plateau corresponding to the oxidation of Fe to Fe(OH)2 is visible at around -0.92 V vs Hg|HgO and the plateau of the formation of iron (III) appears between -0.75 and -0.70 V vs Hg|HgO. Two interesting facts related to all of the electrodes must be noted: first, that both discharge plateaus are roughly the same length. While the stoichiometry of the reactions indicates that two electrons are transferred in the first step and only one in the second and so, the first discharge plateau should be twice the length of the second one. This means that not all the iron (II) hydroxide molecules are reducing to metallic iron and oxidizing to Fe(OH)2 again. The second remarkable fact is that the second discharge plateau appears to be divided into two: a first shorter plateau and a second longer one. This suggests that the oxidation of Fe(OH)2 to FeOOH or Fe2O3 occurs through an intermediary, probably Fe3O4. Figure S9. Detail of the processes of charge and discharge of an iron oxide electrode. Figure S10. Model applied to the discharge capacity of electrodes a) Fe2O3-TAR-air, b) S-Fe2O3-TAR-air, c) Fe2O3-TAR-N2, and d) Fe2O3-SHX-air. Figure S11. Post-mortem XPS analyses of orbitals a) Fe2p and b) O1s of electrode Fe2O3-TAR-N2. S8.- Influence of the physical-chemical properties on rate capability The rate capability of the electrodes S-Fe2O3-TAR-air and S-Fe2O3-TAR-N2 was tested performing charge-discharge cycles at C-rates of 0.8 - 0.4 C and 1.6 C - 0.8 C. The electrode S-Fe2O3-TAR-N2, with lower porosity and surface area, is more affected by higher C-rates, as its f factor decreases from 0.962 to 0.891 when increasing the charge-discharge rates from 0.4 - 0.2 C to 1.6 - 0.8 C. This effect is not as strong in electrode S-Fe2O3-TAR-air (f factor barely decreases, from 0.976 to 0.970). Figure S12. Model applied to the discharge capacity of electrodes a) S-Fe2O3-TAR-air and, b) S-Fe2O3-TAR-N2 at higher C-rates. S9.- Additional EIS data: The equivalent circuit fitted to the Nyquist diagrams of samples Fe2O3-TAR-air and Fe2O3-TAR-N2 is the same as in Figure 7 in the main text. The Nyquist diagram and fitted parameters of Fe2O3-TAR-air show little variability, with the charge transfer resistance increasing ca. 10% after 15 cycles. Fe2O3-TAR-N2, by contrast, shows an increment of 120 mV, more than threefold. Figure S13. Nyquist diagrams of EIS tests after 1 and after 15 cycles of electrodes: a) Fe2O3-TAR-air and b) Fe2O3-TAR-N2 Table S3. Optimized parameters of equivalent circuit (Figure 7 in the main text) for the electrodes in Figure S13. S9.- Post-mortem textural characterization: Figure S14 shows the N2 physisorption obtained for two electrodes, considering a fresh electrode (without cycling) and an electrode cycled 20 times. Both of the tested electrodes (S-Fe2O3-TAR-air and S-Fe2O3-TAR-N2) showed a similar decrease in their surface area and pore volume, as the iron oxides expanded, occupying the pores of the carbon matrix. This phenomenon was investigated by Yang et al. Coincidently with what they found, the electrode S-Fe2O3-TAR-air showed a greater decline in pore size (see Table S4), from 14.1 nm to 6.8 nm, while S-Fe2O3-TAR-N2 average pore diameter increased from 13.8 nm to 16.6 nm. This indicates a better utilization and better contact between the carbon and iron phases in S-Fe2O3-TAR-air electrode, and thus, a greater stability. Figure S14. Adsorption isotherms of electrodes: a) S-Fe2O3-TAR-air, and b) S-Fe2O3-TAR-N2; before cycling and after 20 cycles. Table S4. Textural properties of the fresh and cycled electrodes.-- Under a Creative Commons license BY-NC-ND 4.0., Figure S1.- Electrode manufacturing scheme. S2.- Mössbauer spectroscopy: Figure S2. Mössbauer effect spectra of the studied iron oxides with fitted components and distribution of doublets and sextets as explained in the manuscript. Table S1. Fitted parameters of the Mössbauer spectra using WinNormos software. S3.- Determination of crystallite size: Table S2. Relative molar fractions of iron in hematite and maghemite in %, assuming identical recoilless fractions for both oxides. S4.- Nitrogen physisorption. S5.- XPS spectra: Figure S4. XPS spectra of samples. Figure S5. XPS spectra of orbitals Fe2p and S2p of samples. Figure S6. XPS spectra of orbital O1s of samples. S6.- FESEM and TEM/STEM images of the iron oxides: Figure S7. FESEM micrographs at 50k magnification of iron oxides. Figure S8. TEM micrographs of iron oxides. S7.- Electrochemical reactions on the electrodes and electrodes deactivation: Figure S9. Detail of the processes of charge and discharge of an iron oxide electrode. Figure S10. Model applied to the discharge capacity of electrodes. Figure S11. Post-mortem XPS analyses of orbitals. S8.- Influence of the physical-chemical properties on rate capability. Figure S12. Model applied to the discharge capacity of electrodes. S9.- Additional EIS data: Figure S13. Nyquist diagrams of EIS tests after 1 and after 15 cycles of electrodes. Table S3. Optimized parameters of equivalent circuit (Figure 7 in the main text) for the electrodes in Figure S13. S9.- Post-mortem textural characterization: Figure S14. Adsorption isotherms of electrodes, before cycling and after 20 cycles. Table S4. Textural properties of the fresh and cycled electrodes., The authors wish to acknowledge Ministerio de Ciencia e Innovación and Agencia Estatal de Investigación (MCIN/AEI/10.13039/501100011033) for the PID2020-115848RB-C21 grant. The authors also thank the European Union and the NextGeneration EU program for the funding on grant TED2021-130279A-I00. Authors also acknowledge Gobierno de Aragón (DGA) for the financial support to Grupo de Conversión de Combustibles (T06_20R). N. Villanueva acknowledges also DGA for his pre-doctoral contract., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

On the effect of the nature of carbon nanostructures on the activity of bifunctional catalysts based on manganese oxide nanowires

  • Villanueva, Nicolás
  • Alegre Gresa, Cinthia
  • Sebastián del Río, David
  • Orozco, Nataly
  • Lázaro Elorri, María Jesús
Manganese oxide nanowires (MONW) combined with carbon nanostructures were synthesized using three different carbon materials, and their effect on the activity towards Oxygen Reduction Reaction (ORR) and Oxygen Evolution Reaction (OER) was investigated in alkaline electrolytes. The carbon structures were carbon nanofibers (CNF), multiwall carbon nanotubes (CNT) and reduced graphene oxide (rGO). Both MONW and carbon nanostructures were characterized by X-ray diffraction, scanning and transmission electron microscopy, N2 physisorption and X-ray photoelectron spectroscopy. The electrochemical activity was assessed in a three-electrode cell. Composite MONW/CNF showed the best activity towards ORR, and MONW/rGO exhibited the highest activity towards OER of the series. The addition of the carbon nanostructures to MONW increased the number of electrons transferred in the ORR, indicating a synergistic effect between the carbon and manganese oxide structures due to changes in the reaction pathway. The analysis of Tafel slopes and electrochemical impedance spectroscopies showed that carbons and MONW catalyze different steps of the reactions, which explains the better activity of the composites. This led us to synthesize a MONW/rGO-CNF composite, where rGO-CNF is a hybrid carbon material. Composite MONW/rGO-CNF showed an improved activity towards ORR, close to the benchmark Pt/C catalyst, and activity towards OER, close to MONW/rGO, and better than the benchmark IrO2 catalyst. It also showed remarkable stability in challenging operation conditions., The authors wish to acknowledge Ministerio de Ciencia e Innovación and Agencia Estatal de Investigación (MCIN/AEI/10.13039/501100011033) for the PID2020-115848RB-C21 grant. The authors also thank the European Union and the NextGeneration EU program for the funding of grant TED2021-130279A-I00. The authors also acknowledge Gobierno de Aragón (DGA) for the financial support to Grupo de Conversión de Combustibles (T06_20R). N. Villanueva also acknowledges DGA for his pre-doctoral contract., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Single atom Cu-N-C catalysts for the electro-reduction of CO2 to CO assessed by rotating ring-disc electrode

  • Pérez Rodríguez, Sara
  • Gutiérrez Roa, Manuel
  • Giménez Rubio, Ana Cristina
  • Ríos Ruiz, D.
  • Arévalo Cid, Pablo
  • Martínez Huerta, M. Victoria
  • Zitolo, Andrea
  • Lázaro Elorri, María Jesús
  • Sebastián del Río, David
11 figures, 1 table.-- Supplementary information available., The electrochemical CO2 reduction reaction (CO2RR) to controllable chemicals is considered as a promising pathway to store intermittent renewable energy. Herein, a set of catalysts based on copper-nitrogen-doped carbon xerogel (Cu-N-C) are successfully developed varying the copper amount and the nature of the copper precursor, for the efficient CO2RR. The electrocatalytic performance of Cu-N-C materials is assessed by a rotating ring-disc electrode (RRDE), technique still rarely explored for CO2RR. For comparison, products are also characterized by online gas chromatography in a H-cell. The as-synthesized Cu-N-C catalysts are found to be active and highly CO selective at low overpotentials (from −0.6 to −0.8 V vs. RHE) in 0.1 M KHCO3, while H2 from the competitive water reduction appears at larger overpotentials (−0.9 V vs. RHE). The optimum copper acetate-derived catalyst containing Cu-N4 moieties exhibits a CO2-to-CO turnover frequency of 997 h−1 at −0.9 V vs. RHE with a H2/CO ratio of 1.8. These results demonstrate that RRDE configuration can be used as a feasible approach for identifying electrolysis products from CO2RR., Authors acknowledge Grant PID2020-115848RB-C21 “STORELEC” project, and TED2021-129694B-C22 “DEFY-CO2” project funded by MCIN/AEI/10.13039/501100011033. They also acknowledge LMP253_21 project funded by Gobierno de Aragón. Sara Pérez-Rodríguez thanks Grant IJC2019-041874-I funded by the MCIN/AEI/10.13039/501100011033. Ana Cristina Giménez thanks CSIC for her JAE Intro ICU 2021-ICB-04 grant. David Ríos-Ruiz acknowledges the Y2020/EMT-6419 “CEOTRES” project funded by the Comunidad Autonoma de Madrid., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Supplementary data for Single atom Cu-N-C catalysts for the electro-reduction of CO2 to CO assessed by rotating ring-disc electrode [Dataset]

  • Pérez Rodríguez, Sara
  • Gutiérrez Roa, Manuel
  • Giménez Rubio, Ana Cristina
  • Ríos Ruiz, D.
  • Arévalo-Cid, Pablo
  • Martínez Huerta, M. Victoria
  • Zitolo, Andrea
  • Lázaro Elorri, María Jesús
  • Sebastián del Río, David
Under a Creative Commons license by-nc-nd 4.0, Fig. S1. STEM (left) and TEM (right) images of Cu-N-C-Ac2 acquired using a Tecnay F30 microscope (300 kV). Fig. S2. XRD pattern of Cu-N-C-Ac2-3h obtained using the same experimental details than for Cu-N-CAc2 but with a lixiviation treatment of 3 hours. Fig. S3. N1s XPS spectra of the Cu-N-C. The material Cu-N-C-Ac1-BPT before the two-step post-treatment (acid leaching and 2nd carbonization) is also included for comparison purposes. Fig. S4. Effect of the two-step post-treatment (acid leaching and 2nd carbonization) on the nitrogen adsorption-desorption isotherms for Cu-N-C-Ac1. Fig. S5. Correlation between the Cu oxidation state and the energy position of the XANES spectrum, determined as the first maximum of the first derivative spectrum of Cu-N-C-Ac0.5 (red circle) and different copper reference compounds (black circles).Fig. S6. Variation with time of pH of the electrolyte (0.1 M KHCO3 aqueous solution) as a function of CO2 partial pressure. Balance with an inert gas for the equilibrium CO2 (aq) + H2O ↔ HCO3– + H+, pKa = 6.4, room temperature, 1 atm total pressure. Fig. S7. Oxidation of formic acid and methanol at the Pt ring of an RRDE, disc turned off, 1600 rpm. Fig. S8. Comparison of the CV in 0.1 M KHCO3 saturated with N2 (blue curve), methane oxidation voltammogram after saturation of the electrolyte with CH4 at the open circuit potential (red curve) and CH4 stripping voltammogram (Ead = 0.4 V vs. RHE, green curve) at the Pt ring of an RRDE, disc turned off, 1600 rpm. CV conditions from 0.05 to 1.6 V vs. RHE, 50 mV s-1. Room temperature. Fig. S9. CVs of the disc at 50 mV s-1 and 1600 rpm in CO2-saturated 0.1 M KHCO3 of Cu-N-C catalysts. Fig. S10. Chronoamperometric experiments at the disc for the Cu-N-C catalysts. Electrolyte: Fig. S11. CVs at the platinum ring for disc potentials reported in the legend. Table S1. Bulk chemical composition (wt. %) from EA and ICP of Cu-N-C electrocatalysts before and after the two-step post-treatment (acid leaching and 2nd carbonization). Table S2. N content (at. %) from XPS of the Cu-N-C electrocatalysts. Relative areas (at. %) of the deconvoluted peaks of N1s. Table S3. Textural parameters of Cu-N-C electrocatalysts. Table S4. CO, CH4 and C2H4 formation rate (mmol g-1 h-1) at selected applied potentials (V vs. RHE) and molar H2/CO ratio. Product analysis in a H-type electrochemical cell.  , Authors acknowledge Grant PID2020-115848RB-C21 “STORELEC” project, and TED2021-129694B-C22 “DEFY-CO2” project funded by MCIN/AEI/10.13039/501100011033. They also acknowledge LMP253_21 project funded by Gobierno de Aragón. Sara Pérez-Rodríguez thanks Grant IJC2019-041874-I funded by the MCIN/AEI/10.13039/501100011033. Ana Cristina Giménez thanks CSIC for her JAE Intro ICU 2021-ICB-04 grant. David Ríos-Ruiz acknowledges the Y2020/EMT-6419 “CEOTRES” project funded by the Comunidad Autonoma de Madrid., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Bifunctional TiCo electrocatalysts based on N-doped graphene cryogels for the oxygen evolution and reduction reactions

  • Luque-Centeno, José Manuel
  • Martínez Huerta, M. Victoria
  • Sebastián del Río, David
  • Baglio, Vincenzo
  • Lázaro Elorri, María Jesús
10 figures, 5 tables., Three-dimensional N-doped graphene cryogels (NGC) modified with Ti and Co nanoparticles are investigated as bifunctional oxygen electrocatalysts for potential application in unitized regenerative fuel cells (URFCs). These composites have been successfully produced via a combined solvothermal, freeze-drying, and thermal treatment procedure. Crystallographic structure, surface properties, and morphology are analyzed to study the influence of each metal and the bimetallic combination in forming active sites for oxygen reduction (ORR) and oxygen evolution (OER) reactions. The intrinsic catalytic activity of the composites was determined by rotating disk electrode and further assessed in a gas diffusion electrode to test them in more realistic conditions for URFCs in 6 M KOH. Results revealed the remarkable bifunctional activity of Co/NGC and bimetallic TiCo/NGC composites. The synergistic effect of the metallic cobalt and surface atomic composition of Co3O4 distributed on the N-doped graphene cryogel in Co/NGC is responsible for the high bifunctional performance. Moreover, the partial substitution of cobalt for a less critical raw material, such as titanium, allows the electrocatalyst to maintain great bifunctional activity and stability. The nitrogen doping of the graphene cryogel structure can influence the anatase/rutile titania ratio that forms during pyrolysis. As a result, defects, oxygen vacancies, and Ti3+ species are formed, which, when combined with Co nanoparticles, contribute to the outstanding performance and stability of the TiCo/NGC composite. The excellent performance of N-doped graphene cryogel-based electrocatalysts in GDE conditions indicates their potential use in electrochemical processes, which involve gas-phase reactions., The authors wish to acknowledge the grants PID2020-115848RB-C21 and PID2020-115848RB-C22 funded by MCIN/AEI/10.13039/501100011033, and the Spanish National Research Council (CSIC) through the i-LINK + Programme (i-LINK1106)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Appendix A. Supplementary data for Bifunctional TiCo electrocatalysts based on N-doped graphene cryogels for the oxygen evolution and reduction reactions [Dataset]

  • Luque-Centeno, José Manuel
  • Martínez Huerta, M. Victoria
  • Sebastián del Río, David
  • Baglio, Vincenzo
  • Lázaro Elorri, María Jesús
Under a Creative Commons license BY 4.0 deed., Table S1. Raman shift (cm-1) of the G, D, D’ and D’’ from Raman spectra deconvolution and ID/IG intensity ratio. Table S2. Surface carbon, oxygen, nitrogen, cobalt and titanium contents and C/N, Co/N and Ti/N ratios calculated by XPS of the electrocatalysts and the relative content (%) of the deconvoluted peaks for N1s, Co2p and Ti2p. Figure S1. High-resolution C1s core level of NGC, Ti/NGC, Co/NGC and TiCo/NGC composites. Figure S2. LSV at 0.005 V s−1 in an O2-saturated 0.1 M NaOH solution, recorded using different electrode rotating rates indicated in the legend (rpm). (A) NGC, (B) Ti/NGC, (C) Co/NGC, (D) TiCo/NGC. Figure S3. Koutecky−Levich diagrams obtained between 0.3 and 0.56 V vs RHE for each composite. (A) NGC, (B) Ti/NGC, (C) Co/NGC, (D) TiCo/NGC. Figure S4. Koutecky−Levich diagrams obtained between 0.6 and 0.78 V vs RHE for each composite. (A) NGC, (B) Ti/NGC, (C) Co/NGC, (D) TiCo/NGC., The authors wish to acknowledge the grants PID2020-115848RB-C21 and PID2020-115848RB-C22 funded by MCIN/AEI/10.13039/501100011033, and the Spanish National Research Council (CSIC) through the i-LINK + Programme (i-LINK1106)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of carbon xerogel activation on Fe−N−C catalyst activity in fuel cells

  • Álvarez Manuel, Laura
  • Alegre Gresa, Cinthia
  • Sebastián del Río, David
  • Napal, Pedro F.
  • Moreno Redondo, C.
  • Bailón García, Esther
  • Carrasco Marín, Francisco
  • Lázaro Elorri, María Jesús
6 figures, 7 tables.-- Supplementary information available., Fe−N−C catalysts are an interesting option for polymer electrolyte fuel cells due to their low cost and high activity towards the oxygen reduction reaction (ORR). Since Fe−N−C active sites are preferentially formed in the micropores of the carbon matrix, increasing the microporosity is highly appealing. In this work, carbon xerogels (CXG) were activated by physical and chemical methods to favor the formation of micropores, used as carbon matrices for Fe−N−C catalysts, and investigated for the ORR. The catalysts were characterized by solid-state techniques to determine chemical composition and pore structure. Physical activation increased microporosity up to 2-fold leading to catalysts with a larger density of active sites (more than twice iron and nitrogen uptake, pyridinic N and Nx−Fe). This entailed a higher ORR intrinsic activity determined in a 3-electrode cell (80 mV better half-wave potential). At the cathode of a fuel cell, the catalysts based on activated carbon materials showed 26 % lower power density ascribed to a more hydrophilic surface, causing a larger extent of flooding of the electrode that counterbalances the higher intrinsic activity. Interestingly, a more stable behavior was observed for the activated catalysts, with up to 2-fold better relative power density retention after 20-hour operation., The authors wish to acknowledge the grant PID2020-115848RB-C21 funded by MCIN/AEI/10.13039/501100011033. This research has received funding from the European Institute of Innovation and Technology (EIT) through project EIT RM – n. 18252. Authors also acknowledge Gobierno de Aragón (DGA) for the financial support to Grupo de Conversión de Combustibles (T06_23R). L. Álvarez acknowledges also DGA for her pre-doctoral contract., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Supporting information for Effect of carbon xerogel activation on Fe−N−C catalyst activity in fuel cells [Dataset]

  • Álvarez Manuel, Laura
  • Alegre Gresa, Cinthia
  • Sebastián del Río, David
  • Napal, Pedro F.
  • Moreno Redondo, C.
  • Bailón García, Esther
  • Carrasco Marín, Francisco
  • Lázaro Elorri, María Jesús
Electrochemical characterization: Figure S3 shows the linear sweep voltammetries of the different catalysts subjected to several cycles of acid leaching/thermal treatments. Catalysts were named as Fe-N-CXG-X-Tn, where X represents the activation method (CO2, H2O and KOH) and Tn indicates the number of cycles of acid leaching/thermal treatment performed over each catalyst. The curve with the highest activity is plotted with a thicker line, to highlight the number of cycles giving rise to the most active catalyst.-- Under a Creative Commons license BY 4.0., Reaction for carbon activation with CO2: S1. Reactions for carbon activation with water vapour: S2, S3, S4, S5. Reactions that can take place during carbon activation with KOH [1]: S6, S7, S8, S9, S10, S11, S12, S13, S14. Physicochemical characterization: Figure S1 XPS high resolution O1s spectra for (a) CXG, (b) CXG-CO2 (c) CXG-H2O and (d) CXG-KOH considering 30 % Gaussian and 70% Lorentzian peak shape and Shirley background; Figure S2: XPS high resolution C1s spectra for (a) CXG, (b) CXG-CO2 (c) CXG-H2O and (d) CXG-KOH considering 30 % Gaussian and 70% Lorentzian peak shape and Shirley background; Table S1: Chemical composition determined by ICP, elemental analysis and XPS for Fe-N-CXG catalysts; Electrochemical characterization: Figure S3 Polarization curves for the ORR, in RDE at 1600 rpm in O2-saturated 0.5M H2SO4 for a) Fe-N-CXG, b) Fe-N-CXG-CO2, c) Fe-N-CXG-H2O, d) Fe-N-CXG-KOH subjected to successive cycles of acid leaching/thermal treatments indicated as Tn (n is the number of cycles performed). Figure S4 Polarization curve and power density curve for commercial Pt/C catalyst at the cathode and anode (0.2 mgPt cm-2), Nafion® NR212 membrane. Operating conditions: 80 °C; H2/O2 at λ= 1.3/1.5, 100% RH, and back pressure of 1.5 bar-gauge. Figure S5: Detail pictures of a drop of water on the surface of electrodes. a) Fe-NCXG, b) Fe-N-CXG-CO2, c) Fe-N-CXG-H2O, d) Fe-N-CXG-KOH. Figure S6. (a) Polarization curves and (b) power density curves after at the end of test (EoT), consisting of 20h operation at 0.5 V. Fe-N-CXG catalysts (4 mg cm-2) at the cathode, Nafion® NR212 membrane, and Pt40%/C (0.2 mgPt cm-2) at the anode. Operating conditions: 80 °C; H2/O2 at λ= 1.3/1.5, 100% RH, and back pressure of 1.5 bar-gauge., The authors wish to acknowledge the grant PID2020-115848RB-C21 funded by MCIN/AEI/10.13039/501100011033. This research has received funding from the European Institute of Innovation and Technology (EIT) through project EIT RM – n. 18252. Authors also acknowledge Gobierno de Aragón (DGA) for the financial support to Grupo de Conversión de Combustibles (T06_23R). L. Álvarez acknowledges also DGA for her pre-doctoral contract., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tailored porous carbon xerogels for Fe-N-C catalysts in proton exchange membrane fuel cells

  • Álvarez Manuel, Laura
  • Alegre Gresa, Cinthia
  • Sebastián del Río, David
  • Napal, Pedro F.
  • Lázaro Elorri, María Jesús
8 figures, 8 tables.-- Supplementary information available., Atomically dispersed Fe-N-C catalysts for the oxygen reduction reaction (ORR) have been synthesized with a template-free method using carbon xerogels (CXG) as a porous matrix. The porosity of the CXGs is easily tunable through slight variations in the synthesis procedure. In this work, CXGs are prepared by formaldehyde and resorcinol polymerization, modifying the pH during the process. Materials with a broad range of porous structures are obtained: from non-porous to micro-/meso-/macroporous materials. The porous properties of CXG have a direct effect on Fe-N-CXG activity against ORR in an acidic medium (0.5 M H2SO4). Macropores and wide mesopores are vital to favor the mass transport of reagents to the active sites available in the micropores, while narrower mesopores can generate additional tortuosity. The role of microporosity is investigated by comparing two Fe-N-C catalysts using the same CXG as the matrix but following a different Fe and N doping procedure. In one case, the carbonization of CXG occurs rapidly and simultaneously with Fe and N doping, whereas in the other case it proceeds slowly, under controlled conditions and before the doping process, resulting in the formation of more micropores and active sites and achieving higher activity in a three-electrode cell and a better durability during fuel cell measurements. This work proves the feasibility of the template-free method using CXG as a carbon matrix for Fe-N-C catalysts, with the novelty of the controlled porous properties of the carbon material and its effect on the catalytic activity of the Fe-N-C catalyst. Moreover, the results obtained highlight the importance of the carbon matrix’s porous structure in influencing the activity of Fe-N-C catalysts against ORR., Authors acknowledge Grant PID2020-115848RB-C21 funded by MCIN/AEI/10.13039/501100011033 and Gobierno de Aragón (T06_23R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Materiales compuestos de carbono dopado con nitrógeno y cobalto y cobre como catalizadores bifuncionales

  • Cebollada Borao, Jesús
  • Sebastián del Río, David
  • Lázaro Elorri, María Jesús
  • Martínez Huerta, M. Victoria
2 figuras.-- Abstract de la comunicación oral de Tecnologías para la generación sostenible de energía presentada en la XVI Reunión del Grupo Español del Carbón (Reunión GEC 2023), celebrada en Gijón del 22 al 25 de octubre de 2023., El hidrógeno es el vector energético que nos permitirá realizar la transición hacia nuevas energías limpias. Para ello es necesario encontrar catalizadores activos y de bajo coste para la producción y uso del hidrógeno en tecnologías, como las pilas de combustible regenerativas en una unidad (URFCs), evitando el uso de metales nobles (Pt, Ir, Ru). En este dispositivo, la reacción de reducción de oxígeno (ORR) y la reacción de evolución de oxígeno (OER) desempeñan roles vitales en el electrodo de oxígeno [1]. Se ha realizado un estudio de materiales compuestos basados en combinaciones de Cu y Co con una matriz de carbono dopada con nitrógeno como catalizadores bifuncionales activos para OER y ORR para su uso en URFC [2]. El objetivo de este trabajo ha sido optimizar la cantidad de metales en los composites manteniendo la misma actividad y estabilidad de los electrocatalizadores., Los autores desean agradecer al Ministerio de Ciencia e Innovación y a la Agencia Estatal de Investigación (MCIN/AEI/10.13039/501100011033) la financiación recibida con los proyectos de investigación PID2020- 115848RB-C21 y PID2020-115848RB-C22 y al Gobierno de Aragón la financiación al grupo T0620R. Además J. Cebollada quiere agradecer la ayuda PRE2018-084842 financiada por MCIN/AEI/10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electro-reducción de CO2 en catalizadores Cu-N-C. Detección de productos mediante electrodo rotatorio de disco anillo

  • Gutiérrez Roa, Manuel
  • Pérez Rodríguez, Sara
  • Giménez Rubio, Ana Cristina
  • Ríos Ruiz, D.
  • Arévalo-Cid, Pablo
  • Martínez Huerta, M. Victoria
  • Zitolo, Andrea
  • Lázaro Elorri, María Jesús
  • Sebastián del Río, David
1 figura.-- Abstract de la comunicación oral presentada en la XVI REUNIÓN GEC 2023 en la sección Aplicaciones catalíticas, medioambientales y biosanitarias, Gijón (España), celebrada del 22 al 25 de octubre de 2023., La reducción electroquímica de CO2 (CO2RR) destaca como una solución prometedora para la mitigación del cambio climático. Sin embargo, esta reacción presenta desafíos debido a la alta estabilidad de la molécula de CO2 y la difícil selectividad hacia diferentes productos, así como la competencia con la reacción de evolución de hidrógeno, haciendo necesario el desarrollo de catalizadores activos y selectivos. Actualmente, los catalizadores atómicamente dispersos se posicionan como una solución prometedora para modular la selectividad de esta reacción hacia CO. Entre ellos, los catalizadores M-N-C presentan sitios activos basados en átomos de un metal de transición coordinado con nitrógeno en una matriz carbonosa, lo que permite obtener catalizadores con alta porosidad, buena conductividad eléctrica y bajo coste. En cuanto a la identificación de los productos, si bien técnicas exsitu (cromatografía, espectrometría de masas), son comúnmente utilizadas, estas presentan ciertas limitaciones en términos de desfase temporal y detección de productos en concentraciones muy bajas. Para abordar este inconveniente, el uso de un electrodo rotatorio de disco anillo (RRDE) se propone como una alternativa rápida y factible para la identificación de los productos generados durante la CO2RR. En este método, los catalizadores se depositan en el disco del electrodo, donde tiene lugar la CO2RR, mientras que los productos generados son simultáneamente oxidados en el anillo. Este trabajo presenta el estudio de catalizadores Cu-N-C basados en una matriz carbonosa de xerogel de carbono dopado con nitrógeno. Se analizó la influencia del precursor de cobre y de la concentración de metal durante la síntesis de los catalizadores en su comportamiento electroquímico para la CO2RR mediante el uso de RRDE., Los autores desean agradecer al Ministerio de Ciencia e Innovación y a la Agencia Estatal de Investigación (MCIN/AEI/10.13039/501100011033) la financiación recibida con el proyecto de referencia PID2020- 115848RB-C21 y al Gobierno de Aragón la financiación al grupo T06-20R y al proyecto LMP253_21. S. Pérez- Rodríguez agradece también al MCIN/AEI por la concesión de su contrato Juan de la Cierva-Incorporación (IJC2019-041874-I)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Building robust copper nanostructures via carbon coating derived from polydopamine for oxygen reduction reaction

  • Cebollada Borao, Jesús
  • Sebastián del Río, David
  • Yamasaki, Jun
  • Agúndez Rodríguez, Javier
  • Lázaro Elorri, María Jesús
  • Martínez Huerta, M. Victoria
13 figures, 3 tables., This study explores the synthesis and electrocatalytic performance of copper-nitrogen-carbon composites formed by Cu single atoms/clusters embedded in nitrogen-doped carbon with Cu/Cu2O nanoparticles (Cu-X-NC) for the oxygen reduction reaction (ORR). The catalysts were synthesized using polydopamine as a carbon and nitrogen source via the solvothermal carbonization (STC) method, followed by pyrolysis and acid washing. The effect of solvothermal carbonization temperature (120, 150, and 180 °C) on the structure and ORR activity was investigated. The physicochemical characterization showed that higher STC temperatures reduced the size of copper crystallites, slightly increased the formation of copper(I) oxide, and led to the creation of well-dispersed copper single atoms/clusters at 150 °C. This optimal dispersion enhances the interaction between the copper single atoms and the reactants, leading to faster ORR kinetics, as demonstrated by the lower charge transfer resistance values in electrochemical impedance spectroscopy measurements. Additionally, the balance between micropore and mesopore structures at this temperature facilitates efficient mass transport, which is critical for achieving higher ORR activity. Moreover, accelerated stability tests showed excellent durability for Cu-150-NC, with negligible loss in onset potential after 10,000 cycles. The solvothermal process significantly increased the electrochemically active surface area (ECSA), with Cu-150-NC displaying the highest specific activity and mass activity per gram of copper, indicating superior performance. Overall, these findings underscore the importance of synthesis optimization and provide valuable insights for designing eco-friendly and high-performance copper catalysts for fuel cell applications., The authors wish to acknowledge the grants PID2020-115848RB-C21 and PID2020-115848RB-C22 funded by MCIN/AEI/10.13039/501100011033. J. Cebollada also thanks the grant PRE2018-084842 funded by MCIN/AEI/10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Supplementary data for Building robust copper nanostructures via carbon coating derived from polydopamine for oxygen reduction reaction [Dataset]

  • Cebollada Borao, Jesús
  • Sebastián del Río, David
  • Yamasaki, Jun
  • Agúndez Rodríguez, Javier
  • Lázaro Elorri, María Jesús
  • Martínez Huerta, M. Victoria
6 figures, 2 tables.-- Under a Creative Commons license CC BY 4.0, https://creativecommons.org/licenses/by/4.0/, Figure S1. TEM images and diffraction patterns of copper, cuprite and graphite for Cu-150-NC. Figure S2. Raman Spectrum of Cu-X-NC (X= 0, 120, 150, 180). Figure S3. High resolution N1s spectra of Cu-X-NC (X= 0, 120, 150, 180). Figure S4. Nyquist plot from EIS experiments at 0.78 V vs RHE for the catalysts Cu-X-NC (X = 0, 120, 150 and 180). Figure S5. ORR polarization curves before and after accelerated stability test of catalysts Cu-0-NC, Cu-120-NC and Cu 180-NC. Figure S6. SEM images of Cu-150-NC (A) before and (B) after acceleration stability test. Table S1. Surface chemical composition (wt%) of the catalysts obtained by XPS. Table S2 Double Layer capacitance, Electrochemical Surface Area, Mass Activity and Specific Activity of the catalyst Cu-X-NC (X= 0, 120, 150 and 180) and after Accelerated stability test Cu-X-NC 10000 (X=0, 120, 150 and 180)., The authors wish to acknowledge the grants PID2020-115848RB-C21 and PID2020-115848RB-C22 funded by MCIN/AEI/10.13039/501100011033. J. Cebollada also thanks the grant PRE2018-084842 funded by MCIN/AEI/10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

In situ growth of nickel phosphide on carbon felt as a promising electrocatalyst for the alkaline hydrogen evolution reaction

  • Gebreslase, Gebrehiwet Abrham
  • Martínez Huerta, M. Victoria
  • Sebastián del Río, David
  • Lázaro Elorri, María Jesús
7 figures., One of the key challenges in scaling up sustainable hydrogen production is the need for efficient electrocatalysts based on abundant elements for the hydrogen evolution reaction (HER). This study introduces a simple and scalable method for producing a binder-free NiP supported on carbon felt (NiP@CF) electrocatalyst through a hydrothermal route followed by phosphorization. The three-dimensional (3D) conductive structure of carbon felt, resembling a sponge, is crucial for immobilizing electroactive materials within its fibrous framework. The as-prepared NiP@CF electrocatalyst demonstrates remarkable performance, requiring only a low overpotential of 134 mV to achieve a current density of 10 mA cm–2 in a 1 M KOH electrolyte. Moreover, the catalyst exhibits impressive stability, maintaining its superior performance for at least 60 h without noticeable deterioration. The good performance of the NiP@CF catalyst can be attributed to several factors: the formation of electroactive Ni5P4 and NiP2 phases on the porous carbon felt, the interconnected 3D network of the substrate, which enhances electron and mass transport and improves electrolyte contact and reaction rates, and the increased electrochemical surface area, providing abundant active sites for electrochemical reactions., The authors acknowledge the Grants PID2020-115848RB-C21 and PID2020-115848RB-C22 funded by MCIN/AEI/10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Performance evaluation of poly(vinylidene fluoride)- vinyl benzyl trimethyl ammonium chloride copolymer as anion exchange membranes for fuel cell applications

  • Rehman, Muhammad Habib ur
  • Sebastián del Río, David
  • Napal, Pedro F.
  • Nicotera, Isabella
  • Simari, Cataldo
7 figures, 1 table., In recent years, poly(vinylidene fluoride) (PVDF) and its family of copolymers have started to gain increasing attention as potential systems to produce chemically and mechanically stable anion exchange membranes (AEMs). Here, a novel anion exchange membrane has been synthesized by chemical grafting of a vinyl benzyl trimethylammonium chloride monomer to the PVDF backbone. The resulting PVDF-VB copolymer was investigated under three ionic forms, i.e., Cl–, HCO3–, and OH–, comparing the swelling capability, mechanical robustness, transport properties, and ionic conductivity. In its hydroxylated form, the PVDF-VB membrane exhibited efficient OH– transport under both long and short ranges and achieved a conductivity value of 20 mS/cm at 80 °C and 90% RH. For the first time, the single H2–O2 fuel cell performance of PVDF-VB was investigated, resulting in a beginning-of-life OCV of 1.04 with a peak power density of 118 mW cm–2 at 70, M.H.R., I.N., and C.S. acknowledge financial support under the National Recovery and Resilience Plan (NRRP), Mission 4, Component 2, Investment 1.1, Call for tender No. 1409 published on September 14, 2022 by the Italian Ministry of University and Research (MUR), funded by the European Union – NextGenerationEU – Project Title UNIRE – CUP H53D23007910001, Grant Assignment Decree No. 1409 adopted on September 14, 2022 by the Italian Ministry of Ministry of University and Research (MUR). The ICB-CSIC authors (D.S. and P.F.N.) acknowledge Grant PID2020-115848RB-C21 funded by MCIN/AEI/10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Supporting information for In situ growth of nickel phosphide on carbon felt as a promising electrocatalyst for the alkaline hydrogen evolution reaction [Dataset]

  • Gebreslase, Gebrehiwet Abrham
  • Martínez Huerta, M. Victoria
  • Sebastián del Río, David
  • Lázaro Elorri, María Jesús
Under a Creative Commons BY 4.0 license: https://creativecommons.org/licenses/by/4.0/, 1. Physicochemical characterization; Figure S1. (a)TEM image of NiP@CF, and (b,c)HAADF-EDX of NiP@CF; Figure S2. XPS survey spectra of the various samples; Figure S3. HER polarization curves comparison of NiP@CF sample at different thermal treatments; Figure S4. Cyclic voltammograms at different scan rates: (a) CF, (b) P@CF, (c)NiO@CF, (d)NiO@CF-T, and (e)NiP@CF; Figure S5. (a) SEM and (b )EDX of NiP@CF after stability measurements, Scanning electron microscopy (SEM-EDX) was conducted using an SEM Hitachi 3400N and an EDX Röntec XFlash of Si (Li). For detailed morphology observation, a high-resolution transmission electron microscope (TEM) (Tecnai F30) was utilized, operating at an accelerating voltage of 200 kV. X-ray diffraction (XRD) analyses were performed using a Bruker D8 Advance diffractometer with Cu Kα as the X-ray source, generating 1600 W. X-ray photoelectron spectra (XPS) were acquired using a VG Escalab 200R spectrometer equipped with a hemispherical electron analyzer. The XPS measurements employed Mg Kα (1253.6 eV) at 100 W with passing energy of 50 eV for the survey analysis and 20 eV for the high-resolution regions. The C 1s line at 284.6 eV was used for charge correction in all XPS spectra. Peak fitting and quantification were performed using CasaXPS software, and a Shirley-type background was applied to all peaks. A 70%/30% Gaussian/Lorentzian line shape was employed to deconvolute the high-resolution data for each component., The authors acknowledge the Grants PID2020-115848RB-C21 and PID2020-115848RB-C22 funded by MCIN/AEI/10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Supplementary information for Performance evaluation of poly(vinylidene fluoride)- vinyl benzyl trimethyl ammonium chloride copolymer as anion exchange membranes for fuel cell applications [Dataset]

  • Rehman, Muhammad Habib ur
  • Sebastián del Río, David
  • Napal, Pedro F.
  • Nicotera, Isabella
  • Simari, Cataldo
1 figure., Figure S1. Arrhenius plots for the water self-diffusion coefficients measurend on PVDF-VB membrane in the Cl-, HCO3- and OH- forms., M.H.R., I.N., and C.S. acknowledge financial support under the National Recovery and Resilience Plan (NRRP), Mission 4, Component 2, Investment 1.1, Call for tender No. 1409 published on September 14, 2022 by the Italian Ministry of University and Research (MUR), funded by the European Union – NextGenerationEU – Project Title UNIRE – CUP H53D23007910001, Grant Assignment Decree No. 1409 adopted on September 14, 2022 by the Italian Ministry of Ministry of University and Research (MUR). The ICB-CSIC authors (D.S. and P.F.N.) acknowledge Grant PID2020-115848RB-C21 funded by MCIN/AEI/10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Materiales de carbono derivados de residuos vitivinícolas para la electro-reducción de CO2

  • Giménez Rubio, Ana Cristina
  • Vela, Irene
  • Gutiérrez Roa, Manuel
  • Lázaro Elorri, María Jesús
  • Pérez Rodríguez, Sara
Resumen de la comunicación oral presentada en la II Jornada de Jóvenes Investigadores del Grupo Español del Carbón, celebrada en Baeza (Jaén, España), 20 - 22 de noviembre de 2024, en la sección Aplicaciones de los Materiales basados en Carbono en Generación y Almacenamiento de Energía., La electro-reducción de CO2 (CO2RR) consiste en la conversión de CO2 a otros compuestos carbonosos utilizando electricidad procedente, idealmente, de fuentes renovables. Esta tecnología no solo ofrece una vía para almacenar energía, sino que también contribuye a reducir la concentración de CO2 atmosférico. No obstante, la CO2RR es una reacción compleja debido a que el CO2 es una molécula muy estable y la selectividad de la reacción hacia productos concretos es difícil de controlar. Por ello, su desarrollo requiere el uso de catalizadores avanzados que optimicen tanto la actividad como la selectividad de la reacción. Tradicionalmente, los catalizadores basados en metales han sido los más investigados para la CO2RR. En los últimos años, se han explorado materiales de carbono libres de metal como una alternativa prometedora y de bajo coste. Se ha comprobado que grupos funcionales de N, en especial el piridínico, son capaces de favorecer la conversión de CO2 a CO [1]. Otros estudios sugieren que la porosidad de los catalizadores también influye en su desempeño electroquímico [2]. Como precursor de carbono, se puede emplear biomasa, una materia prima abundante, económica y renovable, lo que contribuye a una tecnología más ecológica y accesible [3]. En este trabajo se han preparado distintos catalizadores a partir de residuos vitivinícolas y urea variando las estrategias de dopado con nitrógeno. La composición de la muestra, estructura y textura se han estudiado mediante diferentes técnicas analíticas. El comportamiento electro-químico fue evaluado en una celda de tres electrodos, empleando una disolución acuosa de 0,1M KHCO3 como electrolito y un electrodo de disco anillo rotatorio como electrodo de trabajo. Los resultados obtenidos muestran la eficacia de los catalizadores en la producción de CO y la influencia de las rutas de síntesis sobre su actividad para la CO2RR., Los autores desean agradecer a MICIU/AEI/10.13039/501100011033 y la Unión Europea NextGenerationEU/PRTR la financiación recibida con el proyecto de referencia PID2020-115848RB-C21 y al Gobierno de Aragón por la financiación al proyecto LMP253_21 y al grupo T06-23R. A.C. Giménez-Rubio desea agradecer al CSIC la concesión de su beca JAE Intro ICU 2021-ICB-04. S. Pérez-Rodríguez agradece también al MICIU/AEI/10.13039/501100011033 la concesión de su contrato Juan de la Cierva-Incorporación IJC2019-041874-I., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Oxidación controlada de nanofibras de carbono para catalizadores de Ni-N-C para la reacción de evolución de oxígeno

  • Serrano-Alcalde, Carlos
  • Loreto, A. A.
  • Pérez Rodríguez, Sara
  • Lázaro Elorri, María Jesús
  • Sebastián del Río, David
Resumen de la comunicación oral presentada en la II Jornada de Jóvenes Investigadores del Grupo Español del Carbón, celebrada en Baeza (Jaén, España), 20 - 22 de noviembre de 2024, en la sección Aplicaciones de los Materiales basados en Carbono en Generación y Almacenamiento de Energía., El mundo se encuentra en plena transición hacia un modelo energético más sostenible y respetuoso con el medioambiente. En este contexto, el hidrógeno emerge como un vector energético clave para lograr dicha transformación. Actualmente, la tecnología más desarrollada para la producción de hidrógeno verde es la electrólisis del agua, aunque su viabilidad económica y técnica depende en gran medida del uso de catalizadores que optimicen su eficiencia. Entre las tecnologías de electrólisis, este estudio se centra en la electrólisis con membrana de intercambio aniónico (AEM), una alternativa con gran potencial, ya que combina las ventajas de la electrólisis alcalina (AE) y la de membrana de intercambio protónico (PEM). Sin embargo, para mejorar la viabilidad de esta tecnología, es fundamental abordar las limitaciones asociadas a la reacción de evolución de oxígeno (OER), cuya cinética es más lenta que la formación de hidrógeno [1]. Este estudio se centra en la investigación de catalizadores de níquel disperso a nivel atómico en una matriz de carbono (nanofibras) dopada con nitrógeno (Ni-N-C) para la reacción de evolución de oxígeno (OER), con el objetivo de aumentar la actividad a dicha semi-reacción. La innovación de esta investigación radica en la modificación química mediante la oxidación con peróxido de hidrógeno de una matriz de nanofibras de carbono, buscando aumentar la cantidad de sitios activos y así mejorar el rendimiento en la OER [2]. Las nanofibras de carbono fueron seleccionadas debido a su excelente conductividad y estabilidad, proporcionada por su estructura interna grafítica. La principal conclusión es que resulta crucial introducir rugosidades y/o defectos en la superficie de las nanofibras para alojar sitios activos sin comprometer la estructura filamentosa, y la oxidación parcial es una buena estrategia para ello., Estos resultados son parte del proyecto de I+D+i de referencia PID2020-115848RB-C21, financiado por MICIU/AEI/10.13039/501100011033. C. Serrano-Alcalde desea además agradecer al MICIU la concesión de su contrato predoctoral PRE2021-099878., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electrocatalizadores derivados de residuos de bodega aplicados a la reacción de reducción de oxígeno

  • Vela, Irene
  • Pérez Rodríguez, Sara
  • Sebastián del Río, David
  • Napal, Pedro F.
  • Lázaro Elorri, María Jesús
Resumen de la comunicación oral presentada en la II Jornada de Jóvenes Investigadores del Grupo Español del Carbón, celebrada en Baeza (Jaén, España), 20 - 22 de noviembre de 2024, en la sección Aplicaciones de los Materiales basados en Carbono en Generación y Almacenamiento de Energía., Hoy en día, la electrocatálisis desempeña un papel fundamental en la lucha contra el cambio climático. Una aplicación de su uso es la producción de energía libre de emisiones contaminantes en dispositivos denominados pilas de combustible. En dichos dispositivos, la reacción limitante es la que ocurre en el cátodo, la reacción de reducción de oxígeno (ORR), con una cinética lenta y que precisa de una cantidad importante de catalizador [1]. Entre los materiales más utilizados como catalizadores en esta reacción se encuentran los basados en nanopartículas de platino soportadas sobre negro de carbono. La necesidad de un metal noble y escaso, encarece el coste total de la pila, complicando su comercialización [2]. Como alternativa, se están desarrollando catalizadores libres de metal basados en materiales de carbono dopados con nitrógeno. El dopado con nitrógeno provoca la redistribución electrónica en su superficie creando especies activas para la adsorción de moléculas de oxígeno [3]. Por otro lado, utilizar como fuente de carbono residuos biomásicos resulta prometedor ya que son sostenibles, baratos y, de este modo, se fomenta la economía circular [4]. El objetivo del trabajo es el estudio y optimización de la ruta de síntesis de materiales de carbono obtenidos a partir de raspones de uva y urea como electrocatalizadores para la ORR. Los materiales se caracterizaron fisicoquímicamente mediante técnicas de análisis de sólidos y electroquímicamente en una celda de tres electrodos con electrodo rotatorio de disco-anillo en KOH 0,1M. A partir de la ruta de síntesis optimizada se obtuvo un material de carbono libre de metal activo para la ORR y con prestaciones similares a un catalizador comercial de Pt/C., Los autores desean agradecer al MCIN/AEI /10.13039/501100011033 por la financiación recibida por el proyecto de investigación PID2020-115848RB-C21 y al Gobierno de Aragón por la financiación al grupo T06_23R. I. Vela desea agradecer al CSIC la concesión de su beca JAE Intro ICU 2021-ICB-04. S. Pérez-Rodríguez agradece también al MCIN/AEI /10.13039/501100011033 la concesión de su contrato Juan de la Cierva-Incorporación IJC2019-041874-I., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Graphene-nanofiber hybrid carbon composites as support boosting tantalum oxides activity of bifunctional oxygen reduction/evolution catalysts

  • Sebastián del Río, David
  • Ruiz Cornejo, Juan Carlos
  • Martínez Huerta, M. Victoria
  • Lázaro Elorri, María Jesús
10 figures, 6 tables.-- Under a Creative Commons BY 4.0 license., Carbon nanocomposites combining two or more carbon structures at the nanoscale present great potential for electrocatalysis. In this work, the combination of graphene with carbon nanofibers (CNF) is investigated as a hybrid support for tantalum-based electrocatalysts in bifunctional oxygen electrodes. Bifunctional catalysts for both the oxygen reduction and the oxygen evolution reactions (ORR and OER) are highly demanded for energy conversion devices like regenerative fuel cells or metal-air batteries. Tantalum oxides were selected as durable and promising active phases. The content of CNF in the composites was varied between 20 % and 75 %, causing an up to 5-fold increase in surface area by inhibiting the restacking of graphene sheets. Hybrid nanocomposites as catalyst support result in a relevant enhancement of ORR activity compared to the bare materials, excellent bifunctionality and exceptional stability. This novel 3-dimensional structure exposing graphene layers aided by intercalated nanofibers boosts the electroactivity and bifunctionality of the oxides., The authors acknowledge Grants PID2020-115848RB-C21 and PID2020-115848RB-C22 funded by MICIU/AEI/10.13039/501100011033, and to the Gobierno de Aragón (DGA) for the funding to Grupo de Investigación Conversión de Combustibles (T06_23R). J.C. Ruiz-Cornejo acknowledges also DGA for his PhD grant. Authors would like to acknowledge the use of Servicio General de Apoyo a la Investigación-SAI, Universidad de Zaragoza., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Supplementary information for Graphene-nanofiber hybrid carbon composites as support boosting tantalum oxides activity of bifunctional oxygen reduction/evolution catalysts [Dataset]

  • Sebastián del Río, David
  • Ruiz Cornejo, Juan Carlos
  • Martínez Huerta, M. Victoria
  • Lázaro Elorri, María Jesús
Under a Creative Commons BY 4.0 license., Figure S1. Particle size distribution of Ni-based particles (from CNF growth catalyst) in the rGO-CNF1.0 nanocomposite; Figure S2. Pore size distribution curves obtained by applying BJH method to the desorption branches; Figure S3. XPS signals for Ta 4f for the different TaOx-based catalysts; Figure S4. XRD patterns for the TaOx catalysts supported on rGO-CNF composites as well as rGO and CNF (* line with multiple indexes). The dotted lines (shown only those at Bragg angles above 35º 2theta for the sake of clarity) indicate the position of different reflections and Miller indexes according to ICDD reference patterns (Na2Ta8O21 PDF#28-1137, Ta2O5 PDF#89-2843, TaO PDF#89-4772, Ni PDF#87-0712); Table S1. Lattice parameters from XRD patterns for the tantalum-related phases. The values written in bold correspond to the main component of the tantalum-based formulation., The authors acknowledge Grants PID2020-115848RB-C21 and PID2020-115848RB-C22 funded by MICIU/AEI/10.13039/501100011033, and to the Gobierno de Aragón (DGA) for the funding to Grupo de Investigación Conversión de Combustibles (T06_23R). J.C. Ruiz-Cornejo acknowledges also DGA for his PhD grant., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tuning the activity and selectivity of CuPt/C catalysts for the electrochemical CO2 reduction

  • Gutiérrez Roa, Manuel
  • Sebastián del Río, David
  • Guzmán, Hilmar
  • Zammillo, Federica
  • Hernández, Simelys
  • Lázaro Elorri, María Jesús
  • Pérez Rodríguez, Sara
10 figures, 1 table., Copper-based bimetallic catalysts have garnered significant attention for CO2 electrochemical CO2 conversion due to their ability to catalytically reduce CO2 to hydrocarbons and alcohols. Herein, a set of CuPt/C catalysts with different Cu:Pt atomic ratios are successfully synthesised through galvanostatic displacement. The progressive incorporation of platinum on Cu/C nanoparticles significantly impacts the CO2 electro-reduction performance in a 0.1 M KHCO3 solution. The results revealed that Cu:Pt atomic ratios of 99:1 and 95:5 enhance formate production at mild potentials (-0.6 V vs. RHE) due to an improved water activation compared to monometallic Cu/C and, thus a higher availability of protons (or adsorbed hydrogen, *H) near the active sites. In contrast, lower Cu:Pt ratios or higher overpotentials result in diminished formate production. This behaviour is likely due to the affinity of Pt for the carbon-bound *COOH intermediate, which favors CO formation over formate. These findings demonstrate that Pt incorporation in Cu/C nanoparticles can alter the CO2 reduction mechanism, providing insights into the design of selective formate-producing catalysts., Authors acknowledge Grant PID2020–115848RB-C21 “STORELEC” project funded by MICIU/AEI/10.13039/501100011033 and Grant CNS2023–144433 “ALCOELECTRO” project funded by MICIU/AEI/10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR”. Authors also acknowledge Gobierno de Aragón (DGA) for financially supporting Grupo de Conversión de Combustibles (T06_23R) and the project LMP253_21. Sara Pérez-Rodríguez thanks Grant IJC2019–041874-I funded by the MICIU/AEI/10.13039/501100011033. Manuel Gutiérrez-Roa acknowledges Universidad de Zaragoza, Fundación Ibercaja and Fundación CAI for the financial support IT 11/23 and Programa Iberus+ : Movilidad para doctorandos for his mobility grant. Simelys Hernández acknowledges the project CO2Synthesis (ID ROL: 67910) funded by Fondazione Compagnia di San Paolo in the Call Trapezio - Linea 1. Federica Zammillo and Mario Gallone thanks Fondazione CRT for the financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Supplementary information for Tuning the activity and selectivity of CuPt/C catalysts for the electrochemical CO2 reduction [Dataset]

  • Gutiérrez Roa, Manuel
  • Sebastián del Río, David
  • Guzmán, Hilmar
  • Zammillo, Federica
  • Hernández, Simelys
  • Lázaro Elorri, María Jesús
  • Pérez Rodríguez, Sara
Under a Creative Commons license BY-NC 4.0., Figure S1. Particle size distribution for Cu/C, CuPt-99:1/C, and CuPt 95:5/C electrocatalysts; Figure S2. STEM images with corresponding EDX spectra showing elemental counts for Cu/C, CuPt 99:1/C, and CuPt 95:5/C electrocatalysts; Figure S3. AC-HAADF-STEM of a CuPt nanoparticles for CuPt-99:1/C and the corresponding EDX elemental mapping images where Cu and Pt are displayed as blue and yellow colours, respectively; Figure S4. High-resolution XPS spectra of the Cu 2p3/2 region for the CuPt/C catalysts and the monometallic Cu/C; Figure S5. LSVs at 10 mV s-1 of CuPt/C, Cu/C, and commercial Pt/C catalysts in N2 saturated 0.1 M KHCO3; Figure S6. Electrochemical oxidation of adsorbed species derived from CO2 (green lines) or CO (blue lines) reduction at -0.6 V vs. RHE. CVs performed in a potential window excluding CO2RR with the electrolyte saturated with N2 (black line) are also included; Figure S7. Selectivity to CO2RR products in the CuPt-90:10/C and CuPt 75:25/C catalysts at the potentials analysed; Figure S8. CO2RR stability measurements at -0.6 V vs. RHE in CO2-saturated 0.1 M KHCO3 under continuous carbon dioxide bubbling for CuPt-99:1/C and monometallic Cu/C.Table S1. (a) Surface compositions (at.% and wt.%) from XPS. (b) Relative contribution of Cu(0) + Cu(I) and Cu(II) (at.%) from the deconvolution of Cu 2p3/2 and relative contributions normalized to (Cu/(Cu+Pt))XPS. (c) Relative platinum contributions (at.%) from the deconvolution of Pt 4f and relative contributions normalized to (Pt/(Cu+Pt))XPS., Authors acknowledge Grant PID2020–115848RB-C21 “STORELEC” project funded by MICIU/AEI/10.13039/501100011033 and Grant CNS2023–144433 “ALCOELECTRO” project funded by MICIU/AEI/10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR”. Authors also acknowledge Gobierno de Aragón (DGA) for financially supporting Grupo de Conversión de Combustibles (T06_23R) and the project LMP253_21. Sara Pérez-Rodríguez thanks Grant IJC2019–041874-I funded by the MICIU/AEI/10.13039/501100011033. Manuel Gutiérrez-Roa acknowledges Universidad de Zaragoza, Fundación Ibercaja and Fundación CAI for the financial support IT 11/23 and Programa Iberus+ : Movilidad para doctorandos for his mobility grant. Simelys Hernández acknowledges the project CO2Synthesis (ID ROL: 67910) funded by Fondazione Compagnia di San Paolo in the Call Trapezio - Linea 1. Federica Zammillo and Mario Gallone thanks Fondazione CRT for the financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Tesis doctoral (DoctoralThesis)

Copper catalysts: bimetallic nanoparticles and single atoms for CO2 electroreduction

  • Gutiérrez Roa, Manuel
206 páginas.-- Tesis doctoral presentada el 11/07/2025 para obtener el grado de Doctor en Ingeniería Química y del Medio Ambiente por la Universidad de Zaragoza.-- Sobresaliente Cum Laude.-- Mención de Doctorado Internacional., [EN] The electrochemical conversion of carbon dioxide is a key strategy for contributing to the energy transition by converting CO2, a major greenhouse gas, into valuable chemicals and fuels, such as formic acid, methane, or ethylene. This process can be implemented in co-electrolysis systems that combine the CO2 reduction reaction (CO2RR) with water electrolysis, using renewable electricity as the energy source. However, the practical implementation of CO2RR currently faces significant challenges, including high electric consumption due to elevated overpotentials, low product selectivity, and competition with the hydrogen evolution reaction (HER). These limitations highlight the importance of developing advanced electrocatalysts capable of improving efficiency and directing the reaction towards desired products. This PhD Thesis investigates the synthesis, characterisation, and evaluation of Cu-based catalysts for CO2RR, considering the unique ability of copper to reduce CO2 into a variety of fuels and chemicals. Two distinct groups of catalysts were designed and developed: bimetallic CuPt nanoparticles deposited onto carbon supports (CuPt/C) and atomically dispersed copper embedded in nitrogen-doped carbon matrices (Cu-N-CXG). The development of CuPt/C catalysts focused on adjusting different key physico-chemical features, including nanoparticle size, the atomic Cu:Pt ratio, and the carbon support, through the variation of synthesis parameters. The Cu:Pt ratio was varied to assess its influence on CO2RR selectivity towards various products such as formate. Furthermore, various carbon supports with distinct textural and structural properties were synthesised to enhance CuPt nanoparticle distribution and improve the diffusion of reactants and products. These combined strategies demonstrate that optimising synthesis parameters is essential to achieving efficient and selective CO2RR performance with CuPt/C catalysts. The Cu single-atom catalysts were developed by varying key synthesis parameters, including the type of copper precursor, copper content, and the inclusion of post-synthesis treatments. This approach aimed to optimise the density and accessibility of Cu-NX active sites, primarily affecting selectivity, with catalysts exhibiting variable production of CO and H2 depending on the synthesis conditions. Additionally, the influence of the carbon matrix on selectivity was investigated, focusing on the role of nitrogen functionalities in modulating product distribution. A variety of advanced techniques was employed to comprehensively understand the physicochemical features of the carbon materials and the synthesised catalysts, focusing on their structural, textural, and morphological properties. Additionally, different electrochemical techniques were utilised to gain key insights into the electrochemical performance of the catalysts. Chromatography techniques were used to identify and quantify CO2RR products, while rotating ring-disc electrode (RRDE) technique enabled real-time detection of CO2RR products, offering valuable information on product selectivity. This thesis advances the understanding of CO2RR mechanisms and identifies key factors for optimising catalyst performance, including particle size, bimetallic nanoparticle composition, and the role of carbonaceous materials in enhancing the structural properties of the catalysts and influencing their electrochemical behaviour. Ultimately, the development of these PhD Thesis provides valuable contributions to the knowledge of CO2 reduction, the advancement of CO2 electrochemical conversion technologies, and the addressing of key challenges in sustainable energy transitions and climate change mitigation., [ES] La conversión electroquímica del dióxido de carbono es una estrategia fundamental en la transición energética, ya que permite transformar el CO2, un importante gas de efecto invernadero, en productos químicos y combustibles valiosos, como ácido fórmico, metano o etileno. Este proceso puede implementarse en sistemas de coelectrólisis que combinan la reacción de reducción de CO2 (CO2RR) con la electrólisis del agua, utilizando electricidad renovable como fuente de energía. Sin embargo, la aplicación de la CO2RR enfrenta desafíos significativos, como el alto consumo eléctrico debido a elevados sobrepotenciales, la baja selectividad de productos y la competencia con la reacción de evolución de hidrógeno (HER). Estas limitaciones destacan la necesidad de desarrollar electrocatalizadores avanzados que aumenten la eficiencia y mejoren la selectividad de la reacción hacia los productos deseados. Esta tesis doctoral aborda la síntesis, caracterización y evaluación de catalizadores a base de cobre para la CO2RR, aprovechando su capacidad única para transformar CO2 en diversos combustibles y productos químicos. Durante esta investigación, se diseñaron y desarrollaron dos grupos de catalizadores: nanopartículas bimetálicas de CuPt depositadas en soportes de carbono (CuPt/C) y cobre atómicamente disperso en matrices de carbono dopadas con nitrógeno (Cu-N-CXG). El desarrollo de los catalizadores CuPt/C se centró en el ajuste de diferentes características físico-químicas, como el tamaño de nanopartícula, la relación atómica Cu:Pt y el soporte de carbono, por medio de la variación de parámetros de síntesis. La relación Cu:Pt se varió para evaluar su influencia en la selectividad de la CO₂RR hacia distintos productos, incluido el formiato. Además, se sintetizaron soportes de carbono con propiedades texturales y estructurales específicas para optimizar la distribución de las nanopartículas CuPt y la difusión de reactivos y productos. Estas estrategias combinadas ponen de manifiesto la importancia de optimizar los parámetros de síntesis para mejorar la eficiencia y selectividad de la CO2RR con catalizadores CuPt/C. Los catalizadores de Cu atómicamente disperso se desarrollaron variando parámetros de síntesis, como el tipo de precursor de cobre, el contenido de cobre y la inclusión de tratamientos posteriores a la síntesis. Este enfoque buscó optimizar la densidad y accesibilidad de los sitios activos Cu-NX, influyendo principalmente en la selectividad, con catalizadores que mostraron una producción variable de CO y H2 según las condiciones de síntesis. Asimismo, se analizó la influencia de la matriz de carbono en la selectividad, centrándose en el papel de las funcionalidades nitrogenadas en la modulación de la distribución de productos. Durante la tesis se emplearon diferentes técnicas avanzadas para comprender de manera integral las características fisicoquímicas de los materiales de carbono y los catalizadores sintetizados, centrándose principalmente en sus propiedades estructurales, texturales y morfológicas. Además, se utilizaron distintas técnicas electroquímicas para analizar el comportamiento electroquímico de los catalizadores. En concreto, se emplearon técnicas de cromatografía para identificar y cuantificar los productos de la CO2RR, mientras que el uso del electrodo de disco-anillo rotatorio (RRDE) permitió la detección en tiempo real de productos de la CO2RR, proporcionando información valiosa sobre la selectividad hacia ciertos productos. En general, esta tesis profundiza en la comprensión de los mecanismos de la CO2RR e identifica factores clave para optimizar el rendimiento de los catalizadores, como el tamaño de partícula, la composición de las nanopartículas bimetálicas y el papel de los materiales de carbono en las propiedades estructurales de los catalizadores y en su comportamiento electroquímico. En última instancia, esta tesis doctoral contribuye al conocimiento sobre la reducción de CO2, el avance de las tecnologías de conversión electroquímica de CO2 y la mitigación del cambio climático., Los autores agradecen la financiación de los proyectos PID2020-115848RB-C21 "STORELEC" y CNS2023-144433 "ALCOELECTRO" (MICIU/AEI/10.13039/501100011033 y NextGenerationEU/PRTR), así como el apoyo del Gobierno de Aragón (DGA) al Grupo de Conversión de Combustibles (T06_23R) y al proyecto LMP253_21. Asimismo, Manuel Gutiérrez-Roa agradece la financiación de la Universidad de Zaragoza, Fundación Ibercaja, Fundación CAI (IT 11/23) y el Programa Iberus+: Movilidad para doctorandos., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Sulfur-doped carbon nanofibers as support for tantalum oxides bifunctional catalysts for the oxygen reduction and evolution reactions

  • Ruiz-Cornejo, Juan Carlos
  • Sebastián, David
  • Pardo, Juan Ignacio
  • Martínez-Huerta, María Victoria
  • Lázaro, María Jesús
Highly efficient, low-cost and stable bifunctional catalysts for oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) are highly desirable for the development of green electrochemical energy storage and conversion devices. Here, we report the synthesis of sulfur-doped carbon nanofibers (CNF) as support for tantalum oxide nanoparticles. Carbon nanofibers and tantalum oxides represent a durable choice for oxygen electrocatalysis, but an improvement of catalytic activity is required. Upon doping, sulfur is found to be mainly bonded to carbon as C–S–C species (more than 80%). The results show that the effective incorporation of sulfur in the support has a clear positive effect on the electroactivity of the tantalum oxide catalysts. It causes a decrease of OER/ORR overpotential of 80 mV with respect to the undoped counterpart, with special improvement in the ORR. The new catalysts have shown an interesting bifunctional behavior for the OER and ORR, as well as a good stability through time.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Bifunctional oxygen electrocatalysts based on non-critical raw materials: carbon nanostructures and iron-doped manganese oxide nanowires

  • Villanueva-Martínez, N. I.
  • Alegre, C.
  • Martínez-Visus, I.
  • Lázaro, M. J.
Alkaline metal-air batteries are unique systems for energy storage. These devices require a bifunctional catalyst in the positive electrode that must perform both the oxygen evolution and reduction reactions (OER and ORR, respectively). Generally, cobalt-based oxides are employed as air electrodes; however, cobalt is a critical raw material. Future battery devices will mandatorily need non-critical raw materials based on highly abundant metals. Here we investigate the feasibility of iron-doped manganese oxide in the form of nanowires (Fe-MONW) combined with carbon nanofibers. MnO2 is known for being active for the ORR, however its activity towards the OER is not yet fully understood. Carbon nanofibers (CNF) on the other hand, provide the necessary electrical conductivity to the catalytic system. Simple methods and economic materials are employed to synthesize the Fe-MONW/CNF composites. Our results show that there is a synergistic effect between CNF and MONW, especially for the ORR, which manifests in an increase in the number of exchanged electrons– from 2.9 to 3.5 – and a shift in the onset potential of 70 mV. Doping MONW with iron further enhances the catalytic activity, for both the ORR and OER. Fe ions generate defects in the manganese oxide structure, favoring the adsorption of oxygen and eventually enhancing the catalytic activity. Fe-doped-MONW shows onset potentials for OER comparable to the benchmark catalyst, IrO2. The improvement on the catalytic activity is particularly evident in terms of the reversibility gap, ΔE. ΔE is the difference between the potential when the current density is 10 mA cm−2 in OER and the half-wave potential for the ORR, being a fundamental parameter to assess the performance of metal-air batteries. The reversibility gap for the best catalyst, 5Fe-MONW/CNF, is ΔE = 922 mV (140 mV lower than non-doped MONW/CNF and between 160 and 320 mV lower than the individual components, MONW and CNF). Endurance tests show remarkable stability of the iron-doped MONW/CNF, with a stable potential and an even lower ΔE of 800 mV for ca. 20 h of operation (charge-discharge cycles at ± 10 mA cm−2).
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Investigation of the properties influencing the deactivation of iron electrodes in iron-air batteries

  • Villanueva-Martínez, Nicolás I.
  • Alegre, Cinthia
  • Rubín, Javier
  • Mckerracher, Rachel
  • de León, Carlos Ponce
  • Rodríguez, Horacio Antonio Figueredo
  • Lázaro, María Jesús
Iron-air batteries hold the potential to be a key technology for energy storage, thanks to their energy density, low cost, safety and abundance of their materials. In order to scale the technology up and optimize the cell formulations, it is key to obtain a clear understanding of how the physical-chemical properties of the electrode influence their electrochemical behaviour, in particular, the capacity loss. In this work, we propose for the first time mathematical correlations between textural and crystallographic properties of iron electrodes and their electrochemical stability. By adjusting synthesis parameters, we were able to tune pore size and volume, surface area and crystal size of iron oxides, and found that stability is highly correlated to both surface area and pore size. Large surface area and small average pore size provide electrodes with enhanced stability. We hypothesize that the cause for deactivation is the passivation of the electrodes ascribed to the formation of a non-conductive, non-reactive iron (II) hydroxide layer during discharge, which then cannot be reduced to iron again. We validate this hypothesis with electrochemical impedance spectroscopy studies, which show that, in the more stable electrodes, the charge transfer resistance in the Fe(OH)2 to Fe reduction does not significantly change after cycling, contrary to the behaviour of the less stable electrodes, corroborating our hypothesis. Furthermore, the electrode with the best properties was cycled 100 times, retaining almost 75% of its initial capacity at the end of the 100 cycles. These results are highly relevant for the future design and operation of iron-air batteries.