Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tuning the activity and selectivity of CuPt/C catalysts for the electrochemical CO2 reduction

  • Gutiérrez Roa, Manuel
  • Sebastián del Río, David
  • Guzmán, Hilmar
  • Zammillo, Federica
  • Hernández, Simelys
  • Lázaro Elorri, María Jesús
  • Pérez Rodríguez, Sara
10 figures, 1 table., Copper-based bimetallic catalysts have garnered significant attention for CO2 electrochemical CO2 conversion due to their ability to catalytically reduce CO2 to hydrocarbons and alcohols. Herein, a set of CuPt/C catalysts with different Cu:Pt atomic ratios are successfully synthesised through galvanostatic displacement. The progressive incorporation of platinum on Cu/C nanoparticles significantly impacts the CO2 electro-reduction performance in a 0.1 M KHCO3 solution. The results revealed that Cu:Pt atomic ratios of 99:1 and 95:5 enhance formate production at mild potentials (-0.6 V vs. RHE) due to an improved water activation compared to monometallic Cu/C and, thus a higher availability of protons (or adsorbed hydrogen, *H) near the active sites. In contrast, lower Cu:Pt ratios or higher overpotentials result in diminished formate production. This behaviour is likely due to the affinity of Pt for the carbon-bound *COOH intermediate, which favors CO formation over formate. These findings demonstrate that Pt incorporation in Cu/C nanoparticles can alter the CO2 reduction mechanism, providing insights into the design of selective formate-producing catalysts., Authors acknowledge Grant PID2020–115848RB-C21 “STORELEC” project funded by MICIU/AEI/10.13039/501100011033 and Grant CNS2023–144433 “ALCOELECTRO” project funded by MICIU/AEI/10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR”. Authors also acknowledge Gobierno de Aragón (DGA) for financially supporting Grupo de Conversión de Combustibles (T06_23R) and the project LMP253_21. Sara Pérez-Rodríguez thanks Grant IJC2019–041874-I funded by the MICIU/AEI/10.13039/501100011033. Manuel Gutiérrez-Roa acknowledges Universidad de Zaragoza, Fundación Ibercaja and Fundación CAI for the financial support IT 11/23 and Programa Iberus+ : Movilidad para doctorandos for his mobility grant. Simelys Hernández acknowledges the project CO2Synthesis (ID ROL: 67910) funded by Fondazione Compagnia di San Paolo in the Call Trapezio - Linea 1. Federica Zammillo and Mario Gallone thanks Fondazione CRT for the financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Supplementary information for Tuning the activity and selectivity of CuPt/C catalysts for the electrochemical CO2 reduction [Dataset]

  • Gutiérrez Roa, Manuel
  • Sebastián del Río, David
  • Guzmán, Hilmar
  • Zammillo, Federica
  • Hernández, Simelys
  • Lázaro Elorri, María Jesús
  • Pérez Rodríguez, Sara
Under a Creative Commons license BY-NC 4.0., Figure S1. Particle size distribution for Cu/C, CuPt-99:1/C, and CuPt 95:5/C electrocatalysts; Figure S2. STEM images with corresponding EDX spectra showing elemental counts for Cu/C, CuPt 99:1/C, and CuPt 95:5/C electrocatalysts; Figure S3. AC-HAADF-STEM of a CuPt nanoparticles for CuPt-99:1/C and the corresponding EDX elemental mapping images where Cu and Pt are displayed as blue and yellow colours, respectively; Figure S4. High-resolution XPS spectra of the Cu 2p3/2 region for the CuPt/C catalysts and the monometallic Cu/C; Figure S5. LSVs at 10 mV s-1 of CuPt/C, Cu/C, and commercial Pt/C catalysts in N2 saturated 0.1 M KHCO3; Figure S6. Electrochemical oxidation of adsorbed species derived from CO2 (green lines) or CO (blue lines) reduction at -0.6 V vs. RHE. CVs performed in a potential window excluding CO2RR with the electrolyte saturated with N2 (black line) are also included; Figure S7. Selectivity to CO2RR products in the CuPt-90:10/C and CuPt 75:25/C catalysts at the potentials analysed; Figure S8. CO2RR stability measurements at -0.6 V vs. RHE in CO2-saturated 0.1 M KHCO3 under continuous carbon dioxide bubbling for CuPt-99:1/C and monometallic Cu/C.Table S1. (a) Surface compositions (at.% and wt.%) from XPS. (b) Relative contribution of Cu(0) + Cu(I) and Cu(II) (at.%) from the deconvolution of Cu 2p3/2 and relative contributions normalized to (Cu/(Cu+Pt))XPS. (c) Relative platinum contributions (at.%) from the deconvolution of Pt 4f and relative contributions normalized to (Pt/(Cu+Pt))XPS., Authors acknowledge Grant PID2020–115848RB-C21 “STORELEC” project funded by MICIU/AEI/10.13039/501100011033 and Grant CNS2023–144433 “ALCOELECTRO” project funded by MICIU/AEI/10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR”. Authors also acknowledge Gobierno de Aragón (DGA) for financially supporting Grupo de Conversión de Combustibles (T06_23R) and the project LMP253_21. Sara Pérez-Rodríguez thanks Grant IJC2019–041874-I funded by the MICIU/AEI/10.13039/501100011033. Manuel Gutiérrez-Roa acknowledges Universidad de Zaragoza, Fundación Ibercaja and Fundación CAI for the financial support IT 11/23 and Programa Iberus+ : Movilidad para doctorandos for his mobility grant. Simelys Hernández acknowledges the project CO2Synthesis (ID ROL: 67910) funded by Fondazione Compagnia di San Paolo in the Call Trapezio - Linea 1. Federica Zammillo and Mario Gallone thanks Fondazione CRT for the financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Tesis doctoral (DoctoralThesis)

Copper catalysts: bimetallic nanoparticles and single atoms for CO2 electroreduction

  • Gutiérrez Roa, Manuel
206 páginas.-- Tesis doctoral presentada el 11/07/2025 para obtener el grado de Doctor en Ingeniería Química y del Medio Ambiente por la Universidad de Zaragoza.-- Sobresaliente Cum Laude.-- Mención de Doctorado Internacional., [EN] The electrochemical conversion of carbon dioxide is a key strategy for contributing to the energy transition by converting CO2, a major greenhouse gas, into valuable chemicals and fuels, such as formic acid, methane, or ethylene. This process can be implemented in co-electrolysis systems that combine the CO2 reduction reaction (CO2RR) with water electrolysis, using renewable electricity as the energy source. However, the practical implementation of CO2RR currently faces significant challenges, including high electric consumption due to elevated overpotentials, low product selectivity, and competition with the hydrogen evolution reaction (HER). These limitations highlight the importance of developing advanced electrocatalysts capable of improving efficiency and directing the reaction towards desired products. This PhD Thesis investigates the synthesis, characterisation, and evaluation of Cu-based catalysts for CO2RR, considering the unique ability of copper to reduce CO2 into a variety of fuels and chemicals. Two distinct groups of catalysts were designed and developed: bimetallic CuPt nanoparticles deposited onto carbon supports (CuPt/C) and atomically dispersed copper embedded in nitrogen-doped carbon matrices (Cu-N-CXG). The development of CuPt/C catalysts focused on adjusting different key physico-chemical features, including nanoparticle size, the atomic Cu:Pt ratio, and the carbon support, through the variation of synthesis parameters. The Cu:Pt ratio was varied to assess its influence on CO2RR selectivity towards various products such as formate. Furthermore, various carbon supports with distinct textural and structural properties were synthesised to enhance CuPt nanoparticle distribution and improve the diffusion of reactants and products. These combined strategies demonstrate that optimising synthesis parameters is essential to achieving efficient and selective CO2RR performance with CuPt/C catalysts. The Cu single-atom catalysts were developed by varying key synthesis parameters, including the type of copper precursor, copper content, and the inclusion of post-synthesis treatments. This approach aimed to optimise the density and accessibility of Cu-NX active sites, primarily affecting selectivity, with catalysts exhibiting variable production of CO and H2 depending on the synthesis conditions. Additionally, the influence of the carbon matrix on selectivity was investigated, focusing on the role of nitrogen functionalities in modulating product distribution. A variety of advanced techniques was employed to comprehensively understand the physicochemical features of the carbon materials and the synthesised catalysts, focusing on their structural, textural, and morphological properties. Additionally, different electrochemical techniques were utilised to gain key insights into the electrochemical performance of the catalysts. Chromatography techniques were used to identify and quantify CO2RR products, while rotating ring-disc electrode (RRDE) technique enabled real-time detection of CO2RR products, offering valuable information on product selectivity. This thesis advances the understanding of CO2RR mechanisms and identifies key factors for optimising catalyst performance, including particle size, bimetallic nanoparticle composition, and the role of carbonaceous materials in enhancing the structural properties of the catalysts and influencing their electrochemical behaviour. Ultimately, the development of these PhD Thesis provides valuable contributions to the knowledge of CO2 reduction, the advancement of CO2 electrochemical conversion technologies, and the addressing of key challenges in sustainable energy transitions and climate change mitigation., [ES] La conversión electroquímica del dióxido de carbono es una estrategia fundamental en la transición energética, ya que permite transformar el CO2, un importante gas de efecto invernadero, en productos químicos y combustibles valiosos, como ácido fórmico, metano o etileno. Este proceso puede implementarse en sistemas de coelectrólisis que combinan la reacción de reducción de CO2 (CO2RR) con la electrólisis del agua, utilizando electricidad renovable como fuente de energía. Sin embargo, la aplicación de la CO2RR enfrenta desafíos significativos, como el alto consumo eléctrico debido a elevados sobrepotenciales, la baja selectividad de productos y la competencia con la reacción de evolución de hidrógeno (HER). Estas limitaciones destacan la necesidad de desarrollar electrocatalizadores avanzados que aumenten la eficiencia y mejoren la selectividad de la reacción hacia los productos deseados. Esta tesis doctoral aborda la síntesis, caracterización y evaluación de catalizadores a base de cobre para la CO2RR, aprovechando su capacidad única para transformar CO2 en diversos combustibles y productos químicos. Durante esta investigación, se diseñaron y desarrollaron dos grupos de catalizadores: nanopartículas bimetálicas de CuPt depositadas en soportes de carbono (CuPt/C) y cobre atómicamente disperso en matrices de carbono dopadas con nitrógeno (Cu-N-CXG). El desarrollo de los catalizadores CuPt/C se centró en el ajuste de diferentes características físico-químicas, como el tamaño de nanopartícula, la relación atómica Cu:Pt y el soporte de carbono, por medio de la variación de parámetros de síntesis. La relación Cu:Pt se varió para evaluar su influencia en la selectividad de la CO₂RR hacia distintos productos, incluido el formiato. Además, se sintetizaron soportes de carbono con propiedades texturales y estructurales específicas para optimizar la distribución de las nanopartículas CuPt y la difusión de reactivos y productos. Estas estrategias combinadas ponen de manifiesto la importancia de optimizar los parámetros de síntesis para mejorar la eficiencia y selectividad de la CO2RR con catalizadores CuPt/C. Los catalizadores de Cu atómicamente disperso se desarrollaron variando parámetros de síntesis, como el tipo de precursor de cobre, el contenido de cobre y la inclusión de tratamientos posteriores a la síntesis. Este enfoque buscó optimizar la densidad y accesibilidad de los sitios activos Cu-NX, influyendo principalmente en la selectividad, con catalizadores que mostraron una producción variable de CO y H2 según las condiciones de síntesis. Asimismo, se analizó la influencia de la matriz de carbono en la selectividad, centrándose en el papel de las funcionalidades nitrogenadas en la modulación de la distribución de productos. Durante la tesis se emplearon diferentes técnicas avanzadas para comprender de manera integral las características fisicoquímicas de los materiales de carbono y los catalizadores sintetizados, centrándose principalmente en sus propiedades estructurales, texturales y morfológicas. Además, se utilizaron distintas técnicas electroquímicas para analizar el comportamiento electroquímico de los catalizadores. En concreto, se emplearon técnicas de cromatografía para identificar y cuantificar los productos de la CO2RR, mientras que el uso del electrodo de disco-anillo rotatorio (RRDE) permitió la detección en tiempo real de productos de la CO2RR, proporcionando información valiosa sobre la selectividad hacia ciertos productos. En general, esta tesis profundiza en la comprensión de los mecanismos de la CO2RR e identifica factores clave para optimizar el rendimiento de los catalizadores, como el tamaño de partícula, la composición de las nanopartículas bimetálicas y el papel de los materiales de carbono en las propiedades estructurales de los catalizadores y en su comportamiento electroquímico. En última instancia, esta tesis doctoral contribuye al conocimiento sobre la reducción de CO2, el avance de las tecnologías de conversión electroquímica de CO2 y la mitigación del cambio climático., Los autores agradecen la financiación de los proyectos PID2020-115848RB-C21 "STORELEC" y CNS2023-144433 "ALCOELECTRO" (MICIU/AEI/10.13039/501100011033 y NextGenerationEU/PRTR), así como el apoyo del Gobierno de Aragón (DGA) al Grupo de Conversión de Combustibles (T06_23R) y al proyecto LMP253_21. Asimismo, Manuel Gutiérrez-Roa agradece la financiación de la Universidad de Zaragoza, Fundación Ibercaja, Fundación CAI (IT 11/23) y el Programa Iberus+: Movilidad para doctorandos., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Boosting the oxygen reduction electrocatalytic performance of grape stem-derived N-doped activated carbons via (hydro)thermal annealing

  • Vela, Irene
  • Lázaro Elorri, María Jesús
  • Pérez Rodríguez, Sara
6 figures., Developing efficient and sustainable electrocatalysts for the oxygen reduction reaction (ORR) is essential for the advancement of alkaline fuel cells. In this work, nitrogen-doped activated carbons were synthesized from grape stems using urea as the nitrogen source. Porosity was developed via CO2 activation and further enhanced by a previous hydrothermal treatment. A second thermal step at 1000 °C was employed to tune the nitrogen distribution. The combination of hydrothermal treatment and high-temperature annealing promoted an increased graphitic-to-pyrrolic nitrogen ratio, which was found to govern the overall ORR performance of the resulting activated carbons. The optimized material (CN-HGS-CO2-L-1000) exhibited a high surface area (782 m2 g−1) and an enhanced graphitic-to-pyrrolic N ratio (2.85), translated into excellent ORR activity in 0.1 M KOH, with a half-wave potential (0.84 V) surpassing Pt/C (0.82 V vs RHE). These findings underscore the synergistic role of graphitic-N/pyrrolic-N in biomass-derived activated carbons for ORR, and provide valuable insights into the valorisation of abundant grape-processing residues into active and sustainable electrocatalysts., This work was supported by CNS2023-144433 “ALCOELECTRO” project funded by MICIU/AEI/10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR”. Authors acknowledge Grant PID2023-150998OB-I00 funded by MICIU/AEI/10.13039/501100011033 and co-funded by ERDF “A way of making Europe” and by ESF+. Authors also acknowledge the Gobierno de Aragón (DGA) for financially supporting Grupo de Conversión de Combustibles (T06_23R) and the project LMP253_21. Irene Vela thanks Gobierno de Aragón for her predoctoral grant (E-50–2025–0102958)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Supplementary material for Boosting the oxygen reduction electrocatalytic performance of grape stem-derived N-doped activated carbons via (hydro)thermal annealing [dataset]

  • Vela, Irene
  • Lázaro Elorri, María Jesús
  • Pérez Rodríguez, Sara
Under a Creative Commons BY NC 4.0 license, Table S1. Proximate analysis (wt.%), CHNS composition (wt.%) from EA of GS. In the case of GS, the ashes were also analysed by ICP (wt.%); Table S2. CHNS composition (wt.%) from EA and surface N content (wt.% and at.%) from XPS of GS-derived carbon materials; Table S3. Textural parameters of GS-derived carbon materials; Table S4. Electrochemical ORR parameters obtained for GS-derived carbon materials in O2-saturated 0.1 M KOH at 1600 rpm; Table S5. Elemental composition (wt.%) by ICP of GS and N-doped activated carbons; Figure S1. SEM images of a, b) CN-GS, c, d) CN-HGS, and e, f) CN-HGS-CO2; Figure S2. SEM image and corresponding EDX mapping of C, N and O for CN-HGS-CO2; Figure S3. a) XRD pattern and b) Raman spectra of CN-HGS-CO2, and c) XRD pattern and d) Raman spectra of CN-HGS-CO2-L-1000; Figure S4. a) CVs at 20 mV s-1 in N2-saturated 0.1M KOH for N-doped GS-derived carbon materials. b) comparison of the CV at 5 mV s-1 in N2- and O2-saturated electrolyte for CN-HGS-CO2; Figure S5. H2O2 yield (%) vs potential curves at 1600 rpm and 5 mV s-1 in O2-saturated 0.1M KOH for N-doped GS-derived carbon materials; Figure S6. a) Number of electrons (n) vs potential curves, and b) H2O2 yield (%) vs. potential curves at 1600 rpm and 5 mV s-1 in O2-saturated 0.1M KOH for C-HGS-CO2 and CN-HGS-CO2; Figure S7. Tafel plot of C-GS, CN-GS, CN-GS-CO2 and CN-HGS. 1600 rpm, 5 mV s-1, O2-saturated 0.1M KOH; Figure S8. Influence of HCl treatment for CN-HGS-CO2: a) LSV at 1600 rpm and 5 mV s-1 in O2-saturated 0.1M KOH for CN-HGS-CO2 and CN-HGS-CO2-L, and b) the corresponding number of electrons vs potential curves and c) H2O2 yield (%) vs potential curves. Figure S9. a) Tafel plots, b) number of electrons (n) vs potential curves, and c) H2O2 yield (%) vs potential curves of CN-HGS-CO2, CN-HGS-CO2-L-1000, CN-HGS-CO2-1000 and Pt/C. 1600 rpm, 5 mV s-1, O2-saturated 0.1M KOH; Figure S10. a) Nyquist plots at E1/2 and 1600 rpm in O2-saturated 0.1 M KOH for CN-HGS-CO2 and CN-HGS-CO2-L-1000; b) methanol tolerance for CN-HGS-CO2-L-1000: LSV at 1600 rpm and 5 mV s-1 in O2-saturated 0.1M KOH before and after the addition of an aliquot of methanol (0.5M CH3OH); Figure S11. a) Current retention during chronoamperometric test at 0.7 V vs RHE in O2-saturated 0.1 M KOH of CN-HGS-CO2-L-1000; b) Cyclic voltammogram at 20 mV s-1 in N2-saturated 0.1 M KOH before and after chronoamperometric test. c) LSV at 1600 rpm before and after accelerated stress test (AST: 1000 cycles from 0.6 to 1.0 V vs. RHE at 50 mV s-1 V vs RHE in O2-saturated 0.1 M KOH of CN-HGS-CO2-L-1000; d) Cyclic voltammogram at 20 mV s-1 in N2-saturated 0.1 M KOH before and after AST; Figure S12. (Left) onset potential and half-wave potential (E1/2) and (right) electron-transfer number (n) as a function of the relative contribution of graphitic nitrogen, pyrrolic nitrogen and pyridinic nitrogen for CN-GS-CO2, CN-GS-CO2-L-1000, CN-HGS-CO2 and CN-HGS-CO2-L-1000; Figure S13. Influence of hydrothermal processing in CN-HGS-CO2-L-1000: a) LSV at 1600 rpm and 5 mV s-1 in O2-saturated 0.1M KOH for CN-HGS-CO2-L-1000 and CN-GS-CO2-L-1000, b) the corresponding number of electrons vs potential curves, and c) H2O2 yield (%) vs potential curves; Figure S14. Comparison of the electrocatalytic performance (E1/2) and N speciation (graphitic-N/pyrrolic-N ratio) of CN-HGS-CO2-L-1000 with those of other biomass-derived N-doped activated carbons from the literature; Figure S15. (Left) onset potential and half-wave potential (E1/2) and (right) electron-transfer number (n) as a function of the surface amount of nitrogen determined by XPS for CN-GS-CO2, CN-GS-CO2-L-1000, CN-HGS-CO2 and CN-HGS-CO2-L-1000. Figure S16. (Left) onset potential and half-wave potential (E1/2) and (right) electron-transfer number (n) as a function of ABET for CN-GS-CO2, CN-GS-CO2-L-1000, CN-HGS-CO2 and CN-HGS-CO2-L-1000., This work was supported by CNS2023-144433 “ALCOELECTRO” project funded by MICIU/AEI/10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR”. Authors acknowledge Grant PID2023-150998OB-I00 funded by MICIU/AEI/10.13039/501100011033 and co-funded by ERDF “A way of making Europe” and by ESF+. Authors also acknowledge the Gobierno de Aragón (DGA) for financially supporting Grupo de Conversión de Combustibles (T06_23R) and the project LMP253_21. Irene Vela thanks Gobierno de Aragón for her predoctoral grant (E-50–2025–0102958)., Peer reviewed