Pasar al contenido principal

TECNOLOGIAS DE ALMACENAMIENTO DE ENERGIA UTILIZANDO ELECTRODOS BASADOS EN CATALIZADORES DURADEROS Y SOSTENIBLES ATOMICAMENTE DISPERSOS

PID2023-150998OB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2023
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Partial exfoliation of carbon nanofibers to enhance Ni-N-C active sites for oxygen evolution reaction

  • Serrano Alcalde, Carlos
  • Ricciardi, Beatrice
  • Pérez Rodríguez, Sara
  • Lázaro Elorri, María Jesús
  • Sebastián del Río, David
8 figures, 4 tables., Carbon nanofibers (CNF) are promising substrates for Ni–N–C electrocatalysts in the oxygen evolution reaction (OER) due to their high electrical conductivity and remarkable resistance to oxidative degradation under harsh anodic conditions. However, this highly graphitic character limits the incorporation of single-atom species. Here, we introduce a partial exfoliation strategy via controlled oxidation (Tour method) of CNF to engineer surface defects and enhance Ni–N incorporation. This route partially exfoliates the CNF surface, increasing defect density and surface accessibility, as confirmed by electrochemical characterization, without compromising the structural integrity of nanofilaments. The controlled modification enables up to a tenfold increase in Ni-N coordination sites, as quantified by XPS, while HAADF-STEM confirms the presence of atomically dispersed Ni sites, with an enhancement of oxygen evolution current density above six-fold relative to the unmodified substrate. A trade-off situation is required between sufficient oxidation to host active sites, and excessive exfoliation leading to partial destruction of the surface. Interestingly, the faradaic efficiency remains above 90 % towards oxygen evolution, demonstrating that defect engineering through partial exfoliation effectively balances structural integrity and active site exposure. Durability experiments reveal robust performance of the most performing catalyst, with the transformation of partial content of Ni-N sites into NiOOH. This approach highlights the tunability of carbon matrices to optimize catalytic performance through controlled defect generation., This work was supported by Grant PID2023-150998OB-I00 funded by MICIU/AEI/10.13039/501100011033 and co-funded by ERDF “A way of making Europe” and by ESF+. Authors also acknowledge Gobierno de Aragón for financing Grupo de Conversión de Combustibles T06_23R. Authors thank LMA at Universidad de Zaragoza for offering access to TEM/STEM facilities. C. Serrano-Alcalde thanks also MICIU/AEI/10.13039/501100011033 for the grant PRE2021-099878 pre-doctoral fellowship., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Boosting the oxygen reduction electrocatalytic performance of grape stem-derived N-doped activated carbons via (hydro)thermal annealing

  • Vela, Irene
  • Lázaro Elorri, María Jesús
  • Pérez Rodríguez, Sara
6 figures., Developing efficient and sustainable electrocatalysts for the oxygen reduction reaction (ORR) is essential for the advancement of alkaline fuel cells. In this work, nitrogen-doped activated carbons were synthesized from grape stems using urea as the nitrogen source. Porosity was developed via CO2 activation and further enhanced by a previous hydrothermal treatment. A second thermal step at 1000 °C was employed to tune the nitrogen distribution. The combination of hydrothermal treatment and high-temperature annealing promoted an increased graphitic-to-pyrrolic nitrogen ratio, which was found to govern the overall ORR performance of the resulting activated carbons. The optimized material (CN-HGS-CO2-L-1000) exhibited a high surface area (782 m2 g−1) and an enhanced graphitic-to-pyrrolic N ratio (2.85), translated into excellent ORR activity in 0.1 M KOH, with a half-wave potential (0.84 V) surpassing Pt/C (0.82 V vs RHE). These findings underscore the synergistic role of graphitic-N/pyrrolic-N in biomass-derived activated carbons for ORR, and provide valuable insights into the valorisation of abundant grape-processing residues into active and sustainable electrocatalysts., This work was supported by CNS2023-144433 “ALCOELECTRO” project funded by MICIU/AEI/10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR”. Authors acknowledge Grant PID2023-150998OB-I00 funded by MICIU/AEI/10.13039/501100011033 and co-funded by ERDF “A way of making Europe” and by ESF+. Authors also acknowledge the Gobierno de Aragón (DGA) for financially supporting Grupo de Conversión de Combustibles (T06_23R) and the project LMP253_21. Irene Vela thanks Gobierno de Aragón for her predoctoral grant (E-50–2025–0102958)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Supporting information for Partial exfoliation of carbon nanofibers to enhance Ni-N-C active sites for oxygen evolution reaction [dataset]

  • Serrano Alcalde, Carlos
  • Ricciardi, Beatrice
  • Pérez Rodríguez, Sara
  • Lázaro Elorri, María Jesús
  • Sebastián del Río, David
Under a Creative Commons BY 4.0 license, Experimental reagents; Figure S1. XPS spectra of the Ni2p region of exfoliated CNF obtained at different KMnO4/CNF ratios; Figure S2. XPS spectra of the C1s region a) CNF, b) CNFex(0.5), c) CNFex(1), d) CNFex(2) and e) CNFex(3); Figure S3. XPS survey spectra of CNFex(1) obtained at different sonication times (10, 30 and 60 mins); Figure S4. XPS spectra of the C1s region a) CNFex(1/10), b) CNFex(1/30) and c) CNFex(1/60); Figure S5. Raman spectra of CNFex(1) obtained at different sonication times (10, 30 and 60 mins); Figure S6. Cyclic voltammograms (CV) from 0.2 to 0.8 V vs. RHE at different scan rates (5, 10, 20, 50, 100, 200 mV/s) of the a) CNF, b) CNFex(0.5), c) CNF(1) and d) CNFex(3); Figure S7. Cyclic voltammograms (CV) from 0.2 to 0.8 V vs. RHE at 20 mV/s of exfoliated CNF obtained at different KMnO4/CNF ratios; Figure S8. Comparison of the specific capacitance at a) different scan rates and b) at 20 mV/s of exfoliated CNF obtained at a KMnO4/CNF ratio of 1 under different sonication times; Figure S9. XRD patterns of Ni-N-CNF catalysts with different sonication times; Figure S10. N 1s XPS spectra of the catalysts a) Ni-N-CNF, b) Ni-N-CNFex(0.5), c) Ni-N-CNFex(1) and d) Ni-N-CNFex(3); Figure S11. Ni 2p XPS spectra of the catalysts; Figure S12. Electrocatalytic performance for OER in 1.0 M KOH media on a RRDE at 1600 rpm and saturated with N2. a) LSV curves for the catalysts with different sonication times. b) Tafel plots. C) Comparison of overpotential at 10 mA/cm2 with the Tafel plots; Figure S13. Chronoamperometry measurement of Ni-N-CNFex(2) catalysts on a RRDE at 1600 rpm in 1.0 M KOH electrolyte saturated with N2, conducted at a fixed potential of 1.52 V vs RHE at the disk and 0.4 V vs RHE at the ring, includes the profile of oxygen faradaic efficiency calculated with Equation 5; Table S1. Ni content (wt%) from ICP and XPS of the bare CNF and CNF exfoliated by the Tour method; Table S2. Surface composition of CNF with different sonication times by XPS and the intensity ratio of the D band to the G band from Raman spectroscopy; Table S3. Structural parameters determined by XRD for carbon (002) peak at different sonication time; Table S4. Chemical composition of nitrogen-doped materials determined by EA; Table S5. Chemical composition of the catalysts with different sonication time analysed by EA, XPS and ICP., This work was supported by Grant PID2023-150998OB-I00 funded by MICIU/AEI/10.13039/501100011033 and co-funded by ERDF “A way of making Europe” and by ESF+. Authors also acknowledge Gobierno de Aragón for financing Grupo de Conversión de Combustibles T06_23R. Authors thank LMA at Universidad de Zaragoza for offering access to TEM/STEM facilities. C. Serrano-Alcalde thanks also MICIU/AEI/10.13039/501100011033 for the grant PRE2021-099878 pre-doctoral fellowship., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Supplementary material for Boosting the oxygen reduction electrocatalytic performance of grape stem-derived N-doped activated carbons via (hydro)thermal annealing [dataset]

  • Vela, Irene
  • Lázaro Elorri, María Jesús
  • Pérez Rodríguez, Sara
Under a Creative Commons BY NC 4.0 license, Table S1. Proximate analysis (wt.%), CHNS composition (wt.%) from EA of GS. In the case of GS, the ashes were also analysed by ICP (wt.%); Table S2. CHNS composition (wt.%) from EA and surface N content (wt.% and at.%) from XPS of GS-derived carbon materials; Table S3. Textural parameters of GS-derived carbon materials; Table S4. Electrochemical ORR parameters obtained for GS-derived carbon materials in O2-saturated 0.1 M KOH at 1600 rpm; Table S5. Elemental composition (wt.%) by ICP of GS and N-doped activated carbons; Figure S1. SEM images of a, b) CN-GS, c, d) CN-HGS, and e, f) CN-HGS-CO2; Figure S2. SEM image and corresponding EDX mapping of C, N and O for CN-HGS-CO2; Figure S3. a) XRD pattern and b) Raman spectra of CN-HGS-CO2, and c) XRD pattern and d) Raman spectra of CN-HGS-CO2-L-1000; Figure S4. a) CVs at 20 mV s-1 in N2-saturated 0.1M KOH for N-doped GS-derived carbon materials. b) comparison of the CV at 5 mV s-1 in N2- and O2-saturated electrolyte for CN-HGS-CO2; Figure S5. H2O2 yield (%) vs potential curves at 1600 rpm and 5 mV s-1 in O2-saturated 0.1M KOH for N-doped GS-derived carbon materials; Figure S6. a) Number of electrons (n) vs potential curves, and b) H2O2 yield (%) vs. potential curves at 1600 rpm and 5 mV s-1 in O2-saturated 0.1M KOH for C-HGS-CO2 and CN-HGS-CO2; Figure S7. Tafel plot of C-GS, CN-GS, CN-GS-CO2 and CN-HGS. 1600 rpm, 5 mV s-1, O2-saturated 0.1M KOH; Figure S8. Influence of HCl treatment for CN-HGS-CO2: a) LSV at 1600 rpm and 5 mV s-1 in O2-saturated 0.1M KOH for CN-HGS-CO2 and CN-HGS-CO2-L, and b) the corresponding number of electrons vs potential curves and c) H2O2 yield (%) vs potential curves. Figure S9. a) Tafel plots, b) number of electrons (n) vs potential curves, and c) H2O2 yield (%) vs potential curves of CN-HGS-CO2, CN-HGS-CO2-L-1000, CN-HGS-CO2-1000 and Pt/C. 1600 rpm, 5 mV s-1, O2-saturated 0.1M KOH; Figure S10. a) Nyquist plots at E1/2 and 1600 rpm in O2-saturated 0.1 M KOH for CN-HGS-CO2 and CN-HGS-CO2-L-1000; b) methanol tolerance for CN-HGS-CO2-L-1000: LSV at 1600 rpm and 5 mV s-1 in O2-saturated 0.1M KOH before and after the addition of an aliquot of methanol (0.5M CH3OH); Figure S11. a) Current retention during chronoamperometric test at 0.7 V vs RHE in O2-saturated 0.1 M KOH of CN-HGS-CO2-L-1000; b) Cyclic voltammogram at 20 mV s-1 in N2-saturated 0.1 M KOH before and after chronoamperometric test. c) LSV at 1600 rpm before and after accelerated stress test (AST: 1000 cycles from 0.6 to 1.0 V vs. RHE at 50 mV s-1 V vs RHE in O2-saturated 0.1 M KOH of CN-HGS-CO2-L-1000; d) Cyclic voltammogram at 20 mV s-1 in N2-saturated 0.1 M KOH before and after AST; Figure S12. (Left) onset potential and half-wave potential (E1/2) and (right) electron-transfer number (n) as a function of the relative contribution of graphitic nitrogen, pyrrolic nitrogen and pyridinic nitrogen for CN-GS-CO2, CN-GS-CO2-L-1000, CN-HGS-CO2 and CN-HGS-CO2-L-1000; Figure S13. Influence of hydrothermal processing in CN-HGS-CO2-L-1000: a) LSV at 1600 rpm and 5 mV s-1 in O2-saturated 0.1M KOH for CN-HGS-CO2-L-1000 and CN-GS-CO2-L-1000, b) the corresponding number of electrons vs potential curves, and c) H2O2 yield (%) vs potential curves; Figure S14. Comparison of the electrocatalytic performance (E1/2) and N speciation (graphitic-N/pyrrolic-N ratio) of CN-HGS-CO2-L-1000 with those of other biomass-derived N-doped activated carbons from the literature; Figure S15. (Left) onset potential and half-wave potential (E1/2) and (right) electron-transfer number (n) as a function of the surface amount of nitrogen determined by XPS for CN-GS-CO2, CN-GS-CO2-L-1000, CN-HGS-CO2 and CN-HGS-CO2-L-1000. Figure S16. (Left) onset potential and half-wave potential (E1/2) and (right) electron-transfer number (n) as a function of ABET for CN-GS-CO2, CN-GS-CO2-L-1000, CN-HGS-CO2 and CN-HGS-CO2-L-1000., This work was supported by CNS2023-144433 “ALCOELECTRO” project funded by MICIU/AEI/10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR”. Authors acknowledge Grant PID2023-150998OB-I00 funded by MICIU/AEI/10.13039/501100011033 and co-funded by ERDF “A way of making Europe” and by ESF+. Authors also acknowledge the Gobierno de Aragón (DGA) for financially supporting Grupo de Conversión de Combustibles (T06_23R) and the project LMP253_21. Irene Vela thanks Gobierno de Aragón for her predoctoral grant (E-50–2025–0102958)., Peer reviewed