Pasar al contenido principal

CATALIZADORES BIFUNCIONALES BASADOS EN RESIDUOS AGROINDUSTRIALES PARA ELECTRODOS AVANZADOS PARA LA REDUCCION Y EVOLUCION DE OXIGENO

PID2020-115848RB-C22

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2020
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 22
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

En busca de electrocatalizadores más sostenibles: composites de cobre y carbón dopado con nitrógeno para la reacción de reducción de oxígeno

  • Cebollada Borao, Jesús
  • Lázaro Elorri, María Jesús
  • Sebastián del Río, David
  • Martínez Huerta, M. Victoria
2 figuras.-- Resumen de la comunicación oral presentada en la XV Reunión del Grupo Español del Carbón, 24-27 abril 2022, Granada (España).-- O38.-- D.L. GR 695-2022, Las pilas de combustible de membrana polimérica son una de las opciones más prometedoras para la conversión fiable y eficiente de energía limpia que van a ejercer un papel fundamental en la nueva transición energética del siglo XXI. Sin embargo, uno de los mayores obstáculos que presentan estos dispositivos es la relativa baja actividad de la reacción de reducción de oxígeno (ORR) que tiene lugar en el cátodo, y el alto coste de los catalizadores basados principalmente en Pt. El objetivo de este trabajo es la elaboración de electrocatalizadores sostenibles y competitivos en la reacción de reducción de oxígeno (ORR) para una pila de combustible de membrana polimérica intercambiadora de aniones. Para ello se han preparado composites formados por una matriz carbonosa dopada con nitrógeno y utilizando el Cu como metal activo. Este tipo de catalizadores ha sido poco estudiado en la bibliografía en comparación con otros metales, que cada vez están más cotizados para otros fines y que proceden de cadenas de suministro cuestionables en países subdesarrollados., Los autores quieren agradecer la ayuda PID2020-115848RB-C21 y PID2020-115848RB-C22 financiadas por MCIN/AEI/10.13039/501100011033. Además J. Cebollada quiere agradecer la ayuda PRE2018-084842 financiada por MCIN/AEI/10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Catalizadores bifuncionales basados en grafeno dopado con N y modificados con titanio y cobalto para pilas de combustible regenerativas en una unidad

  • Luque-Centeno, José Manuel
  • Martínez Huerta, M. Victoria
  • Sebastián del Río, David
  • Baglio, Vincenzo
  • Lázaro Elorri, María Jesús
1 figura.-- Resumen de la comunicación oral presentada en la XV Reunión del Grupo Español del Carbón, 24-27 abril 2022, Granada (España).-- O58.-- D.L. GR 695-2022, Las pilas de combustible regenerativas en celda unidad (URFC) están llamadas a tener un papel importante en el diseño de nuevos planes energéticos que permitan abandonar el uso de combustibles fósiles. Sin embargo, esta tecnología se encuentra limitada por la baja cinética de las reacciones que ocurren en el electrodo de oxígeno (reacciones de evolución (OER) y reducción (ORR) de oxígeno) y del alto coste de los catalizadores empleados en su operación. Una forma de incrementar la cinética de estas reacciones es el uso de electrolitos alcalinos. Este tipo de medio disminuye la corrosión de los materiales empleados como catalizadores, permitiendo el uso de metales no nobles, así como soportes basados en carbono. El objetivo de este trabajo es la síntesis de materiales nanoestructurados, basados en criogeles de grafeno dopados con nitrógeno y nanopartículas metálicas de Ti y Co, y el estudio de su actividad como catalizadores para la ORR y la OER en medio alcalino., Los autores desean agradecer al Minsiterio de Ciencia e Innovación y a la Agencia Estatal de Investigación (MCIN/AEI/10.13039/501100011033) la financiación recibida con los proyectos de investigación PID2020-115848RB-C21 y PID2020-115848RB-C22., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Catalizadores basados en tantalio y nanofibras de carbono para electrodos bifuncionales de oxígeno

  • Ruiz Cornejo, Juan Carlos
  • Sebastián del Río, David
  • Martínez Huerta, M. Victoria
  • Lázaro Elorri, María Jesús
1 figura.--Resumen de la comunicación presentada en la XV Reunión del Grupo Español del Carbón, 24-27 abril 2022, Granada (España).-- C-50.-- D.L. GR 695-2022, Las reacciones de reducción y de evolución de oxígeno (ORR, OER) son de especial interés en el desarrollo de dispositivos energéticos como pilas de combustible regenerativas o baterías metal-aire. El diseño de catalizadores bifuncionales capaces de catalizar eficientemente ambas reacciones es un tema de gran actualidad. Algunos óxidos metálicos de los grupos IV y V de la tabla periódica, como el tantalio, son catalíticamente activos y además presentan una muy buena estabilidad, pero su conductividad eléctrica y su área superficial son generalmente muy bajas. En este trabajo se ha investigado la utilización de nanofibras de carbono como soporte de óxidos de tantalio para mejorar dichas características., Los autores desean agradecer al Ministerio de Ciencia e Innovación y a la Agencia Estatal de Investigación (MCIN/AEI/10.13039/501100011033) la financiación recibida con los proyectos de investigación PID2020-115848RB-C21 y PID2020-115848RB-C22. También agradecen al Gobierno de Aragón la financiación al grupo T06-20R. J.C.R. agradece a Gobierno de Aragón la financiación de su contrato predoctoral., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Transformation of CoFe2O4 spinel structure into active and robust CoFe alloy/N-doped carbon electrocatalyst for oxygen evolution reaction

  • Gebreslase, Gebrehiwet Abrham
  • Martínez Huerta, M. Victoria
  • Sebastián del Río, David
  • Lázaro Elorri, María Jesús
11 figures, 2 tables.-- Supplementary information available., Electrochemical water splitting is an environmentally benign technology employed for H2 production; however, it is critically hampered by the sluggish kinetics of the oxygen evolution reaction (OER) at the positive electrode. In this work, nitrogen-doped carbon-coated CoFe electrocatalysts were synthesized via a three-step route comprising (1) hydrothermal reaction, (2) in-situ polymerization of dopamine and (3) carbonization. The effect of carbonized polydopamine on the overall physicochemical properties and electrochemical activity of CoFe catalysts was systematically studied. By controlling and optimizing the ratio of CoFe2O4 and dopamine contents, a transformation of the CoFe2O4 structure to CoFe alloy was observed. It was found that CoFe/NC30% (prepared with 30% dopamine) exhibits an excellent catalytic activity towards OER. A small overpotential of 340 mV was required to generate a current density of 10 mA cm-2 in a 1.0 M KOH electrolyte. More importantly, the CoFe/NC30% catalyst reflected exceptional durability for at least 24 h. This research sheds light on the development of affordable, highly efficient, and durable electrocatalysts for OER., Financial support from the European Union's Horizon 2020 Research and Innovation programme under the Marie Skłodowska-Curie Actions-Innovative Training Networks (MSCA-ITN) Grant Agreement 813748 are gratefully acknowledged. The authors wish to acknowledge the grants PID2020-115848RB-C21 and PID2020-115848RB-C22 funded by MCIN/AEI/10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Effect of transition metals on the electrocatalytic activity of N-doped carbon composites derived from polydopamine for oxygen evolution and oxygen reduction reactions

  • Cebollada Borao, Jesús
  • Sebastián del Río, David
  • Lázaro Elorri, María Jesús
  • Martínez Huerta, M. Victoria
4 figures.-- Work presented at the EHEC 2022, European Hydrogen Energy Conference 18-20 May, 2022. Madrid, Spain., In recent years, renewable energies have played an essential role in the technological development to meet energy demand and replace fossil fuels. At the same time, new challenges have arisen in order to implement clean energy production. The problem to store renewable energy that is obtained intermittently in the long term has led the development of fuel cells, electrolyzers and unitized regenerative fuel cells (URFC) to use hydrogen as an energy vector. URFCs can be used for both electric power production and hydrogen generation by adapting to the energy needs of the power grid. The most recent studies using an anion exchange membrane as electrolyte have opened up a range of possibilities for synthesizing new catalysts by replacing noble metals such as Pt, Ir or Ru with cheaper transition metals in combination with N-doped carbon structures [1] This work focuses on the development of noble metal-free bifunctional electrocatalysts for the oxygen electrode of unitized regenerative alkaline fuel cell (UR-AFC), where oxygen evolution (OER) and reduction (ORR) reactions take place [2]. Composites based on non-precious metals such as Ti, Mn, Fe, Co, Ni or Zn, and nitrogen-doped carbonaceous nanostructures obtained from polydopamine have been prepared., The authors wish to acknowledge the grants PID2020-115848RB-C21 and PID2020-115848RB-C22 funded by MCIN/AEI/10.13039/501100011033. J. Cebollada also thanks the grant PRE2018-084842 funded by MCIN/AEI/10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Sulfur-doped carbon nanofibers as support for tantalum oxides bifunctional catalysts for the oxygen reduction and evolution reactions

  • Ruiz Cornejo, Juan Carlos
  • Sebastián del Río, David
  • Pardo, Juan Ignacio
  • Martínez Huerta, M. Victoria
  • Lázaro Elorri, María Jesús
10 figures, 7 tables.-- Supplementary information available., Highly efficient, low-cost and stable bifunctional catalysts for oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) are highly desirable for the development of green electrochemical energy storage and conversion devices. Here, we report the synthesis of sulfur-doped carbon nanofibers (CNF) as support for tantalum oxide nanoparticles. Carbon nanofibers and tantalum oxides represent a durable choice for oxygen electrocatalysis, but an improvement of catalytic activity is required. Upon doping, sulfur is found to be mainly bonded to carbon as C–S–C species (more than 80%). The results show that the effective incorporation of sulfur in the support has a clear positive effect on the electroactivity of the tantalum oxide catalysts. It causes a decrease of OER/ORR overpotential of 80 mV with respect to the undoped counterpart, with special improvement in the ORR. The new catalysts have shown an interesting bifunctional behavior for the OER and ORR, as well as a good stability through time., The authors wish to acknowledge the grants PID2020-115848RB-C21 and PID2020-115848RB-C22 funded by MCIN/AEI/10.13039/501100011033, and to the Gobierno de Aragón (DGA) for the funding to Grupo de Conversión de Combustibles (T06_17R). J.C. Ruiz-Cornejo acknowledges also DGA for his PhD grant., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

NiCoP/CoP sponge-like structure grown on stainless steel mesh as a high-performance electrocatalyst for hydrogen evolution reaction

  • Gebreslase, Gebrehiwet Abrham
  • Martínez Huerta, M. Victoria
  • Sebastián del Río, David
  • Lázaro Elorri, María Jesús
8 figures, 2 tables.-- Supplementary information available., The stainless steel mesh (SSM) has received remarkable attention for hydrogen and oxygen evolution reactions. It was demonstrated that the SSM exhibits admirable performance towards oxygen evolution reaction (OER) electrocatalysis, while its catalytic activity for hydrogen evolution reaction (HER) remains quite low. This obstructs the utilization of SSM-based catalysts for sustainable complete water electrolysis. In this study, a facile hydrothermal route followed by a phosphorization process was adopted to transform commercially available SSM materials into high-performance and stable electrocatalysts for alkaline HER. We report an interconnected NiCoP-CoP sponge-like structure on SSM substrate without polymer binder. Benefiting from the 3D construction with high exposed surface area, close contact between electroactive species and conductive surface, and facilitated infiltration of electrolyte, the as-prepared NiCoP@SSM electrocatalyst brought an improved catalytic activity for HER, required a low overpotential of 138 mV to derive a current density of 10 mAcm−2 in 1.0 M KOH aqueous solution. The high performance of the NiCoP@SSM catalyst has also unveiled fast reaction kinetics (presents a small Tafel slope of 74 mV/dec), a relatively large electrochemical active surface area (ECSA), and small charge transfer resistance. Furthermore, the NiCoP@SSM electrode also presented excellent stability during long-term measurements, making it one of the most encouraging HER electrodes to date. This research study paves the way for the development of HER-active electrocatalysts made from SSMs that are commercially available, low-cost, and highly active., The authors wish to acknowledge the grants PID2020-115848RB-C21 and PID2020-115848RB-C22 funded by MCIN/AEI/10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Carbonized polydopamine-based nanocomposites: The effect of transition metals on the oxygen electrocatalytic activity

  • Cebollada Borao, Jesús
  • Sebastián del Río, David
  • Lázaro Elorri, María Jesús
  • Martínez Huerta, M. Victoria
12 figues, 2 tables.-- Supplementary information available.-- This article belongs to the Special Issue Application of Porous Nanomaterials in Energy Storage and Catalysis, The electrochemical oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) are the most critical processes in renewable energy-related technologies, such as fuel cells, water electrolyzers, and unitized regenerative fuel cells. N-doped carbon composites have been demonstrated to be promising ORR/OER catalyst candidates because of their excellent electrical properties, tunable pore structure, and environmental compatibility. In this study, we prepared porous N-doped carbon nanocomposites (NC) by combining mussel-inspired polydopamine (PDA) chemistry and transition metals using a solvothermal carbonization strategy. The complexation between dopamine catechol groups and transition metal ions (Fe, Ni, Co, Zn, Mn, Cu, and Ti) results in hybrid structures with embedded metal nanoparticles converted to metal–NC composites after the carbonization process. The influence of the transition metals on the structural, morphological, and electrochemical properties was analyzed in detail. Among them, Cu, Co, Mn, and Fe N-doped carbon nanocomposites exhibit efficient catalytic activity and excellent stability toward ORR. This method improves the homogeneous distribution of the catalytically active sites. The metal nanoparticles in reduced (MnO, Fe3C) or metallic (Cu, Co) oxidation states are protected by the N-doped carbon layers, thus further enhancing the ORR performance of the composites. Still, only Co nanocomposite is also effective toward OER with a potential bifunctional gap (ΔE) of 0.867 V. The formation of Co-N active sites during the carbonization process, and the strong coupling between Co nanoparticles and the N-doped carbon layer could promote the formation of defects and the interfacial electron transfer between the catalyst surface, and the reaction intermediates, increasing the bifunctional ORR/OER performance., This research was funded by MCIN/AEI/10.13039/501100011033, grant number PID2020-115848RB-C21 and PID2020-115848RB-C22., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Supporting Information for Transformation of CoFe2O4 spinel structure into active and robust CoFe alloy/N-doped carbon electrocatalyst for oxygen evolution reaction [Dataset]

  • Gebreslase, Gebrehiwet Abrham
  • Martínez Huerta, M. Victoria
  • Sebastián del Río, David
  • Lázaro Elorri, María Jesús
Under a Creative Commons license CC-BY 4.0, Figure S 1. SEM images of (a) CoFe/NC10% , (b) CoFe/NC20% , and (c) CoFe/NC40%. Figure S 2.TEM images of (a) CoFe/NC10% , (b) CoFe/NC20% , and (c) CoFe/NC40%. Figure S 3. Particle size distribution of the various electrocatalyst: (a) CoFe2O4, (b) CoFe/NC10% , (c) CoFe/NC20% ,(d) CoFe/NC30% , and (e) CoFe/NC40% . Table S 1. Amount of CoFe alloys and oxides in the composite samples, determined from the XRD analysis. Figure S 4. XPS high resolution spectra of (a) Fe 2p, (b) Co 2p, for all electrocatalysts. Table S 2. XPS analysis results of the electrocatalysts. Table S 3. Elemental composition of the prepared electrocatalysts. Table S 4. Specific capacitance and ECSA values for the various eletrocataysts. Table S 5. Charge transfer resistance (Rct) and solution resistance (Rs) determined from EIS measurement. Figure S 5. ECSA-normalized polarization curve., Financial support from the European Union's Horizon 2020 Research and Innovation programme under the Marie Skłodowska-Curie Actions-Innovative Training Networks (MSCA-ITN) Grant Agreement 813748 are gratefully acknowledged. The authors wish to acknowledge the grants PID2020-115848RB-C21 and PID2020-115848RB-C22 funded by MCIN/AEI/10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Bifunctional TiCo electrocatalysts based on N-doped graphene cryogels for the oxygen evolution and reduction reactions

  • Luque-Centeno, José Manuel
  • Martínez Huerta, M. Victoria
  • Sebastián del Río, David
  • Baglio, Vincenzo
  • Lázaro Elorri, María Jesús
10 figures, 5 tables., Three-dimensional N-doped graphene cryogels (NGC) modified with Ti and Co nanoparticles are investigated as bifunctional oxygen electrocatalysts for potential application in unitized regenerative fuel cells (URFCs). These composites have been successfully produced via a combined solvothermal, freeze-drying, and thermal treatment procedure. Crystallographic structure, surface properties, and morphology are analyzed to study the influence of each metal and the bimetallic combination in forming active sites for oxygen reduction (ORR) and oxygen evolution (OER) reactions. The intrinsic catalytic activity of the composites was determined by rotating disk electrode and further assessed in a gas diffusion electrode to test them in more realistic conditions for URFCs in 6 M KOH. Results revealed the remarkable bifunctional activity of Co/NGC and bimetallic TiCo/NGC composites. The synergistic effect of the metallic cobalt and surface atomic composition of Co3O4 distributed on the N-doped graphene cryogel in Co/NGC is responsible for the high bifunctional performance. Moreover, the partial substitution of cobalt for a less critical raw material, such as titanium, allows the electrocatalyst to maintain great bifunctional activity and stability. The nitrogen doping of the graphene cryogel structure can influence the anatase/rutile titania ratio that forms during pyrolysis. As a result, defects, oxygen vacancies, and Ti3+ species are formed, which, when combined with Co nanoparticles, contribute to the outstanding performance and stability of the TiCo/NGC composite. The excellent performance of N-doped graphene cryogel-based electrocatalysts in GDE conditions indicates their potential use in electrochemical processes, which involve gas-phase reactions., The authors wish to acknowledge the grants PID2020-115848RB-C21 and PID2020-115848RB-C22 funded by MCIN/AEI/10.13039/501100011033, and the Spanish National Research Council (CSIC) through the i-LINK + Programme (i-LINK1106)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Appendix A. Supplementary data for Bifunctional TiCo electrocatalysts based on N-doped graphene cryogels for the oxygen evolution and reduction reactions [Dataset]

  • Luque-Centeno, José Manuel
  • Martínez Huerta, M. Victoria
  • Sebastián del Río, David
  • Baglio, Vincenzo
  • Lázaro Elorri, María Jesús
Under a Creative Commons license BY 4.0 deed., Table S1. Raman shift (cm-1) of the G, D, D’ and D’’ from Raman spectra deconvolution and ID/IG intensity ratio. Table S2. Surface carbon, oxygen, nitrogen, cobalt and titanium contents and C/N, Co/N and Ti/N ratios calculated by XPS of the electrocatalysts and the relative content (%) of the deconvoluted peaks for N1s, Co2p and Ti2p. Figure S1. High-resolution C1s core level of NGC, Ti/NGC, Co/NGC and TiCo/NGC composites. Figure S2. LSV at 0.005 V s−1 in an O2-saturated 0.1 M NaOH solution, recorded using different electrode rotating rates indicated in the legend (rpm). (A) NGC, (B) Ti/NGC, (C) Co/NGC, (D) TiCo/NGC. Figure S3. Koutecky−Levich diagrams obtained between 0.3 and 0.56 V vs RHE for each composite. (A) NGC, (B) Ti/NGC, (C) Co/NGC, (D) TiCo/NGC. Figure S4. Koutecky−Levich diagrams obtained between 0.6 and 0.78 V vs RHE for each composite. (A) NGC, (B) Ti/NGC, (C) Co/NGC, (D) TiCo/NGC., The authors wish to acknowledge the grants PID2020-115848RB-C21 and PID2020-115848RB-C22 funded by MCIN/AEI/10.13039/501100011033, and the Spanish National Research Council (CSIC) through the i-LINK + Programme (i-LINK1106)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Materiales compuestos de carbono dopado con nitrógeno y cobalto y cobre como catalizadores bifuncionales

  • Cebollada Borao, Jesús
  • Sebastián del Río, David
  • Lázaro Elorri, María Jesús
  • Martínez Huerta, M. Victoria
2 figuras.-- Abstract de la comunicación oral de Tecnologías para la generación sostenible de energía presentada en la XVI Reunión del Grupo Español del Carbón (Reunión GEC 2023), celebrada en Gijón del 22 al 25 de octubre de 2023., El hidrógeno es el vector energético que nos permitirá realizar la transición hacia nuevas energías limpias. Para ello es necesario encontrar catalizadores activos y de bajo coste para la producción y uso del hidrógeno en tecnologías, como las pilas de combustible regenerativas en una unidad (URFCs), evitando el uso de metales nobles (Pt, Ir, Ru). En este dispositivo, la reacción de reducción de oxígeno (ORR) y la reacción de evolución de oxígeno (OER) desempeñan roles vitales en el electrodo de oxígeno [1]. Se ha realizado un estudio de materiales compuestos basados en combinaciones de Cu y Co con una matriz de carbono dopada con nitrógeno como catalizadores bifuncionales activos para OER y ORR para su uso en URFC [2]. El objetivo de este trabajo ha sido optimizar la cantidad de metales en los composites manteniendo la misma actividad y estabilidad de los electrocatalizadores., Los autores desean agradecer al Ministerio de Ciencia e Innovación y a la Agencia Estatal de Investigación (MCIN/AEI/10.13039/501100011033) la financiación recibida con los proyectos de investigación PID2020- 115848RB-C21 y PID2020-115848RB-C22 y al Gobierno de Aragón la financiación al grupo T0620R. Además J. Cebollada quiere agradecer la ayuda PRE2018-084842 financiada por MCIN/AEI/10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Building robust copper nanostructures via carbon coating derived from polydopamine for oxygen reduction reaction

  • Cebollada Borao, Jesús
  • Sebastián del Río, David
  • Yamasaki, Jun
  • Agúndez Rodríguez, Javier
  • Lázaro Elorri, María Jesús
  • Martínez Huerta, M. Victoria
13 figures, 3 tables., This study explores the synthesis and electrocatalytic performance of copper-nitrogen-carbon composites formed by Cu single atoms/clusters embedded in nitrogen-doped carbon with Cu/Cu2O nanoparticles (Cu-X-NC) for the oxygen reduction reaction (ORR). The catalysts were synthesized using polydopamine as a carbon and nitrogen source via the solvothermal carbonization (STC) method, followed by pyrolysis and acid washing. The effect of solvothermal carbonization temperature (120, 150, and 180 °C) on the structure and ORR activity was investigated. The physicochemical characterization showed that higher STC temperatures reduced the size of copper crystallites, slightly increased the formation of copper(I) oxide, and led to the creation of well-dispersed copper single atoms/clusters at 150 °C. This optimal dispersion enhances the interaction between the copper single atoms and the reactants, leading to faster ORR kinetics, as demonstrated by the lower charge transfer resistance values in electrochemical impedance spectroscopy measurements. Additionally, the balance between micropore and mesopore structures at this temperature facilitates efficient mass transport, which is critical for achieving higher ORR activity. Moreover, accelerated stability tests showed excellent durability for Cu-150-NC, with negligible loss in onset potential after 10,000 cycles. The solvothermal process significantly increased the electrochemically active surface area (ECSA), with Cu-150-NC displaying the highest specific activity and mass activity per gram of copper, indicating superior performance. Overall, these findings underscore the importance of synthesis optimization and provide valuable insights for designing eco-friendly and high-performance copper catalysts for fuel cell applications., The authors wish to acknowledge the grants PID2020-115848RB-C21 and PID2020-115848RB-C22 funded by MCIN/AEI/10.13039/501100011033. J. Cebollada also thanks the grant PRE2018-084842 funded by MCIN/AEI/10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Supplementary data for Building robust copper nanostructures via carbon coating derived from polydopamine for oxygen reduction reaction [Dataset]

  • Cebollada Borao, Jesús
  • Sebastián del Río, David
  • Yamasaki, Jun
  • Agúndez Rodríguez, Javier
  • Lázaro Elorri, María Jesús
  • Martínez Huerta, M. Victoria
6 figures, 2 tables.-- Under a Creative Commons license CC BY 4.0, https://creativecommons.org/licenses/by/4.0/, Figure S1. TEM images and diffraction patterns of copper, cuprite and graphite for Cu-150-NC. Figure S2. Raman Spectrum of Cu-X-NC (X= 0, 120, 150, 180). Figure S3. High resolution N1s spectra of Cu-X-NC (X= 0, 120, 150, 180). Figure S4. Nyquist plot from EIS experiments at 0.78 V vs RHE for the catalysts Cu-X-NC (X = 0, 120, 150 and 180). Figure S5. ORR polarization curves before and after accelerated stability test of catalysts Cu-0-NC, Cu-120-NC and Cu 180-NC. Figure S6. SEM images of Cu-150-NC (A) before and (B) after acceleration stability test. Table S1. Surface chemical composition (wt%) of the catalysts obtained by XPS. Table S2 Double Layer capacitance, Electrochemical Surface Area, Mass Activity and Specific Activity of the catalyst Cu-X-NC (X= 0, 120, 150 and 180) and after Accelerated stability test Cu-X-NC 10000 (X=0, 120, 150 and 180)., The authors wish to acknowledge the grants PID2020-115848RB-C21 and PID2020-115848RB-C22 funded by MCIN/AEI/10.13039/501100011033. J. Cebollada also thanks the grant PRE2018-084842 funded by MCIN/AEI/10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

In situ growth of nickel phosphide on carbon felt as a promising electrocatalyst for the alkaline hydrogen evolution reaction

  • Gebreslase, Gebrehiwet Abrham
  • Martínez Huerta, M. Victoria
  • Sebastián del Río, David
  • Lázaro Elorri, María Jesús
7 figures., One of the key challenges in scaling up sustainable hydrogen production is the need for efficient electrocatalysts based on abundant elements for the hydrogen evolution reaction (HER). This study introduces a simple and scalable method for producing a binder-free NiP supported on carbon felt (NiP@CF) electrocatalyst through a hydrothermal route followed by phosphorization. The three-dimensional (3D) conductive structure of carbon felt, resembling a sponge, is crucial for immobilizing electroactive materials within its fibrous framework. The as-prepared NiP@CF electrocatalyst demonstrates remarkable performance, requiring only a low overpotential of 134 mV to achieve a current density of 10 mA cm–2 in a 1 M KOH electrolyte. Moreover, the catalyst exhibits impressive stability, maintaining its superior performance for at least 60 h without noticeable deterioration. The good performance of the NiP@CF catalyst can be attributed to several factors: the formation of electroactive Ni5P4 and NiP2 phases on the porous carbon felt, the interconnected 3D network of the substrate, which enhances electron and mass transport and improves electrolyte contact and reaction rates, and the increased electrochemical surface area, providing abundant active sites for electrochemical reactions., The authors acknowledge the Grants PID2020-115848RB-C21 and PID2020-115848RB-C22 funded by MCIN/AEI/10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Supporting information for In situ growth of nickel phosphide on carbon felt as a promising electrocatalyst for the alkaline hydrogen evolution reaction [Dataset]

  • Gebreslase, Gebrehiwet Abrham
  • Martínez Huerta, M. Victoria
  • Sebastián del Río, David
  • Lázaro Elorri, María Jesús
Under a Creative Commons BY 4.0 license: https://creativecommons.org/licenses/by/4.0/, 1. Physicochemical characterization; Figure S1. (a)TEM image of NiP@CF, and (b,c)HAADF-EDX of NiP@CF; Figure S2. XPS survey spectra of the various samples; Figure S3. HER polarization curves comparison of NiP@CF sample at different thermal treatments; Figure S4. Cyclic voltammograms at different scan rates: (a) CF, (b) P@CF, (c)NiO@CF, (d)NiO@CF-T, and (e)NiP@CF; Figure S5. (a) SEM and (b )EDX of NiP@CF after stability measurements, Scanning electron microscopy (SEM-EDX) was conducted using an SEM Hitachi 3400N and an EDX Röntec XFlash of Si (Li). For detailed morphology observation, a high-resolution transmission electron microscope (TEM) (Tecnai F30) was utilized, operating at an accelerating voltage of 200 kV. X-ray diffraction (XRD) analyses were performed using a Bruker D8 Advance diffractometer with Cu Kα as the X-ray source, generating 1600 W. X-ray photoelectron spectra (XPS) were acquired using a VG Escalab 200R spectrometer equipped with a hemispherical electron analyzer. The XPS measurements employed Mg Kα (1253.6 eV) at 100 W with passing energy of 50 eV for the survey analysis and 20 eV for the high-resolution regions. The C 1s line at 284.6 eV was used for charge correction in all XPS spectra. Peak fitting and quantification were performed using CasaXPS software, and a Shirley-type background was applied to all peaks. A 70%/30% Gaussian/Lorentzian line shape was employed to deconvolute the high-resolution data for each component., The authors acknowledge the Grants PID2020-115848RB-C21 and PID2020-115848RB-C22 funded by MCIN/AEI/10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Graphene-nanofiber hybrid carbon composites as support boosting tantalum oxides activity of bifunctional oxygen reduction/evolution catalysts

  • Sebastián del Río, David
  • Ruiz Cornejo, Juan Carlos
  • Martínez Huerta, M. Victoria
  • Lázaro Elorri, María Jesús
10 figures, 6 tables.-- Under a Creative Commons BY 4.0 license., Carbon nanocomposites combining two or more carbon structures at the nanoscale present great potential for electrocatalysis. In this work, the combination of graphene with carbon nanofibers (CNF) is investigated as a hybrid support for tantalum-based electrocatalysts in bifunctional oxygen electrodes. Bifunctional catalysts for both the oxygen reduction and the oxygen evolution reactions (ORR and OER) are highly demanded for energy conversion devices like regenerative fuel cells or metal-air batteries. Tantalum oxides were selected as durable and promising active phases. The content of CNF in the composites was varied between 20 % and 75 %, causing an up to 5-fold increase in surface area by inhibiting the restacking of graphene sheets. Hybrid nanocomposites as catalyst support result in a relevant enhancement of ORR activity compared to the bare materials, excellent bifunctionality and exceptional stability. This novel 3-dimensional structure exposing graphene layers aided by intercalated nanofibers boosts the electroactivity and bifunctionality of the oxides., The authors acknowledge Grants PID2020-115848RB-C21 and PID2020-115848RB-C22 funded by MICIU/AEI/10.13039/501100011033, and to the Gobierno de Aragón (DGA) for the funding to Grupo de Investigación Conversión de Combustibles (T06_23R). J.C. Ruiz-Cornejo acknowledges also DGA for his PhD grant. Authors would like to acknowledge the use of Servicio General de Apoyo a la Investigación-SAI, Universidad de Zaragoza., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Supplementary information for Graphene-nanofiber hybrid carbon composites as support boosting tantalum oxides activity of bifunctional oxygen reduction/evolution catalysts [Dataset]

  • Sebastián del Río, David
  • Ruiz Cornejo, Juan Carlos
  • Martínez Huerta, M. Victoria
  • Lázaro Elorri, María Jesús
Under a Creative Commons BY 4.0 license., Figure S1. Particle size distribution of Ni-based particles (from CNF growth catalyst) in the rGO-CNF1.0 nanocomposite; Figure S2. Pore size distribution curves obtained by applying BJH method to the desorption branches; Figure S3. XPS signals for Ta 4f for the different TaOx-based catalysts; Figure S4. XRD patterns for the TaOx catalysts supported on rGO-CNF composites as well as rGO and CNF (* line with multiple indexes). The dotted lines (shown only those at Bragg angles above 35º 2theta for the sake of clarity) indicate the position of different reflections and Miller indexes according to ICDD reference patterns (Na2Ta8O21 PDF#28-1137, Ta2O5 PDF#89-2843, TaO PDF#89-4772, Ni PDF#87-0712); Table S1. Lattice parameters from XRD patterns for the tantalum-related phases. The values written in bold correspond to the main component of the tantalum-based formulation., The authors acknowledge Grants PID2020-115848RB-C21 and PID2020-115848RB-C22 funded by MICIU/AEI/10.13039/501100011033, and to the Gobierno de Aragón (DGA) for the funding to Grupo de Investigación Conversión de Combustibles (T06_23R). J.C. Ruiz-Cornejo acknowledges also DGA for his PhD grant., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

N, F Co-Doped Carbon Derived from Spent Bleaching Earth Waste as Oxygen Electrocatalyst Support

  • Aghabarari, Behzad
  • Ebadati, Esmat
  • Cebollada Borao, Jesús
  • Fernández Inchusta, D.
  • Victoria Martínez-Huerta, María
Affordable nitrogen and fluorine co-doped carbon nanostructure was prepared from the hazardous industrial waste of edible oil refinery, spent bleaching earth (SBE), and used as raw material for obtaining high-performance non-noble metal bifunctional oxygen electrocatalysts. Waste SBE contains 35 % residue non-saturated oil as a carbon source and the assistance of montmorillonite (MMT) as the template. This study converts waste SBE into a fluorine-doped carbon nanostructure through a pyrolysis process followed by removing the aluminosilicate layers of the MMT by HF etching. Furthermore, the impregnation of the support with Co and Fe nitrates readily gives rise to N, F co-doped carbon (NFC) electrocatalysts, as confirmed by XPS analysis. Electrochemical results evidenced that the Co-NFC catalyst proved to be a valuable bifunctional competitor for oxygen reduction reaction and oxygen evolution reaction in alkaline media, showing activity in both reactions and superior stability compared with the Fe-NFC catalyst in accelerated tests. This work offers a straightforward, economical, and eco-friendly strategy for designing N, F co-doped carbon-based electrocatalysts for oxygen reactions in electrochemical devices., This research was funded by Materials and Energy Research Center (MERC) through Grant Number 791400001, MCIN/AEI/10.13039/501100011033 through grant number PID2020-115848RB-C22, and by CSIC through grant number COOPB20558. J.C. also thanks MCIN for his PhD grant., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nickel and Ferrocene as Catalyst Candidates to Promote an Effective Oxygen Evolution Reaction

  • Abad, José M.
  • Martínez Huerta, M. Victoria
  • Cebollada Borao, Jesús
  • Sainz, Raquel
  • Pita, Marcos
  • López de Lacey, Antonio
The oxygen evolution reaction (OER) is the main bottleneck in water splitting and other key technologies due to its slow kinetics. The development of low-cost, highly active, stable, and more efficient electrocatalysts as an alternative to the commonly expensive and scarce Ir- and Ru-based catalysts used is necessary. The present work reports the preparation of OER catalysts by a straightforward and easy method based on the synergistic effect of Ni/Ferrocene combination that leads to high current densities, lower overpotential, high stability, and low Tafel slope in alkaline conditions. The optimized Ni/Ferrocene catalyst demonstrates exceptional performance, providing a constant potential of ∼1.51 and ∼1.65 V and overpotentials of ∼0.278 and ∼0.420 V for more than 26 and 46 h at current densities of 10 and 100 mA·cm-2, respectively. It represents an important and significant advance in obtaining electrocatalyst materials for OER anodes without the need for previous and tedious synthetic procedures. Only commercial chemicals with low amounts of metals are employed, thus facilitating that this Ni/ferrocene configuration could be scaled up to real devices. © 2025 The Authors. Published by American Chemical Society., This work has been supported by public funds: J.M.A. and A.L.D.L. acknowledge Grant PID2021-1241160B–I00/AEI/10.13039/501100011033/FEDER, UE; M.P. acknowledges grant TED2021-129694B–C22 funded by MCIN/AEI/10.13039/501100011033 and by the European Union Next Generation EU/PRTR; and M.V.M.H. acknowledges the CEOTRES-CM project funded by the Comunidad de Madrid with grant number Y2020/EMT-6419 and grant PID2020- 115848RB-C22 funded by MCIN/AEI/10.13039/501100011033. Authors express their gratitude to the SpeICat Group of ICP-CSIC for the use of the Raman Renishaw inVia Qontor instrument., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Grape stalk waste-derived nanostructured electrocatalysts for oxygen reduction reaction

  • Arévalo Cid, Pablo
  • Ortega-Redondo, C
  • Aghabarari, B.
  • Cebollada Borao, Jesús
  • Agúndez Rodríguez, Javier
  • Sainz, Raquel
  • Martínez Huerta, M. Victoria
The development of platinum-free electrocatalysts is essential to advance the sustainability and scalability of anion exchange membrane fuel cells (AEMFCs). In this work, we present a simple and cost-effective method to synthesize nitrogen-doped carbon electrocatalysts using raw, wet grape stalks, an abundant lignocellulosic agro-industrial byproduct, without any chemical pre-treatment. The synthesis combines hydrothermal carbonization of grape stalk waste in the presence of Fe or Cu salts, mechanochemical activation with dicyandiamide (DCDA), and pyrolysis, resulting in mesoporous carbon materials enriched in pyridinic nitrogen and metal‑nitrogen coordination sites. XRD analysis additionally confirmed the in-situ formation of Fe<inf>3</inf>C in Fe-based samples. The resulting Fe- and Cu-based catalysts exhibit excellent oxygen reduction reaction (ORR) activity and durability in alkaline media. In particular, the Fe-based catalyst exhibits superior performance, achieving an onset potential of 0.95 V vs. RHE, a low hydrogen peroxide yield (~7%), and a Tafel slope of 53 mV/dec, attributed to the synergistic effects of Fe<inf>3</inf>C and N-doped carbon, as well as the high accessible surface area. Both catalysts maintain their performance after 10,000 potential cycles, with activity losses below 6%. These results highlight the potential of grape stalks as a sustainable carbon source for the production of PGM-free, high-performance electrocatalysts, contributing to circular economy strategies and the decarbonization of hydrogen-based energy technologies. © 2025 The Authors, The authors wish to acknowledge the grants PID2020-115848RB-C22 funded by MCIN/AEI/10.13039/501100011033, CSIC iCOOP-2020 Program (COOPB20558), INVESTIGO Program funded by the European Union NextGenerationEU, and grant 791400012 funded by Materials and Energy Research Center (MERC)., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Sulfur-doped carbon nanofibers as support for tantalum oxides bifunctional catalysts for the oxygen reduction and evolution reactions

  • Ruiz-Cornejo, Juan Carlos
  • Sebastián, David
  • Pardo, Juan Ignacio
  • Martínez-Huerta, María Victoria
  • Lázaro, María Jesús
Highly efficient, low-cost and stable bifunctional catalysts for oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) are highly desirable for the development of green electrochemical energy storage and conversion devices. Here, we report the synthesis of sulfur-doped carbon nanofibers (CNF) as support for tantalum oxide nanoparticles. Carbon nanofibers and tantalum oxides represent a durable choice for oxygen electrocatalysis, but an improvement of catalytic activity is required. Upon doping, sulfur is found to be mainly bonded to carbon as C–S–C species (more than 80%). The results show that the effective incorporation of sulfur in the support has a clear positive effect on the electroactivity of the tantalum oxide catalysts. It causes a decrease of OER/ORR overpotential of 80 mV with respect to the undoped counterpart, with special improvement in the ORR. The new catalysts have shown an interesting bifunctional behavior for the OER and ORR, as well as a good stability through time.