Pasar al contenido principal

DESARROLLO DE UN NUEVO PROCESO DE EXTRACCION EN CASCADA PARA LA VALORIZACION INTEGRAL DE ALGAS EN INGREDIENTES FUNCIONALES PARA APLICACIONES ALIMENTARIAS

PID2020-117744RJ-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2020
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 12
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Structural and functional properties of alginate obtained by means of high hydrostatic pressure-assisted extraction

  • Bojorges-Gutierrez, Hylenne
  • Martínez-Abad, Antonio
  • Marta Martínez-Sanz
  • Vilaplana Domingo, Francisco Javier
  • López-Rubio, Amparo
  • Fabra Rovira, Maria José
[EN] The effects of the high hydrostatic pressure (HPP) pre-treatment on the alginate extraction were seen to greatly depend on the recalcitrant nature of two algae species. Alginates were deeply characterized in terms of composition, structure (HPAEC-PAD, FTIR, NMR, SEC-MALS), functional and technological properties. The pre-treatment significantly increased the alginate yield in the less recalcitrant A. nodosum (AHP) also favoring the extraction of sulphated fucoidan/fucan structures and polyphenols. Although the molecular weight was significantly lower in AHP samples, neither the M/G ratio nor the M and G sequences were modified. In contrast, a lower increase in alginate extraction yield was observed for the more recalcitrant S. latissima after the HPP pre-treatment (SHP), but it significantly affected the M/G values of the resulting extract. The gelling properties of the alginate extracts were also explored by external gelation in CaCl2 solutions. The mechanical strength and nanostructure of the hydrogel beads prepared were determined using compression tests, synchrotron small angle X-ray scattering (SAXS), and cryo-scanning electron microscopy (Cryo-SEM). Interestingly, the application of HPP significantly improved the gel strength of SHP, in agreement with the lower M/G values and the stiffer rod-like conformation obtained for these samples., Grants RTI-2018-094268-B-C22 and PID2020-117744RJ-I00 funded by MCIN/AEI/10.13039/501100011033 and, as appropriate, by ERDF A way of making Europe , by the European Union or by the European Union NextGenerationEU/PRTR . H. Bojorges acknowledges financial support from the Generalitat Valenciana for the award of a Santiago Grisolía grant (GRISOLIAP/2019/007).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Exploring alternative red seaweed species for the production of agar-based hydrogels for food applications

  • Cebrián-Lloret, Vera
  • Martínez-Abad, Antonio
  • López-Rubio, Amparo
  • Martínez-Sanz, Marta
[EN] Three different red seaweed species, Gelidium corneum and two Gracilaria species (Agarophyton chilensis, and Gracilariopsis longissima), were used to produce agar-based fractions through conventional and simplified extraction methods and their composition and gel-forming properties were evaluated. The use of an alkaline pre-treatment was effective in removing impurities such as proteins, lipids, and ash, while the agarose/agaropectin ratio in agar was not affected. This led to the formation of hydrogels with higher stiffness and strength. Surprisingly, the presence of semi-crystalline agaropectin in the agar fractions from the two Gracilaria species, especially G. longissima, promoted the formation of more densely packed and stronger hydrogel networks, with higher gelling temperatures and superior mechanical properties. Thus, these results suggest that G. longissima has the potential to be used as an alternative to the more widespread use of G. corneum for the production of agar hydrogels for food applications., This work was financially supported by Hispanagar. Synchrotron experiments were performed at NCD beamline at ALBA Synchrotron with the collaboration of ALBA staff (proposal 2022025569). The authors also acknowledge funding from the Spanish ministry of Science and Innovation through project PID 2020-117744RJ-I00 and grant CEX2021-001189-S as well as the European Commission through project CIRCALGAE (Horizon Europe) under grant agreement 101060607
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Characterization of the invasive macroalgae Rugulopteryx Okamurae for potential biomass valorisation

  • Cebrián-Lloret, Vera
  • Cartan-Moya, Sara
  • Martínez-Sanz, Marta
  • Gómez-Cortés, Pilar
  • Calvo, María Visitación
  • López-Rubio, Amparo
  • Martínez-Abad, Antonio
[EN] This study aimed to examine the composition and properties of the invasive macroalgae R. okamurae and explore potential applications. The results showed that the seaweed biomass is mainly composed of structural carbohydrates, with alginate being the main constituent, accounting for 32 % of its total composition and with a mannuronic and guluronic acid ratio (M/G) ratio of 0.93. It also has a relatively high concentration of fucose, related to the presence of fucoidans that have important biological functions. Among the mineral contents, a high magnesium and calcium (7107 and 5504 mg/kg) concentration, and the presence of heavy metals above legislated thresholds, were notable. R. okamurae also contained a high lipid content of 17 %, mainly composed of saturated fatty acids, but with a significant fraction of n3 polyunsaturated fatty acids (18 %) resulting in a low n6/n3 ratio (0.31), that has health benefits. The protein content of R. okamurae was 12 %, with high-quality proteins, as essential amino acids (mainly leucine, phenylalanine and valine) constitute 32 % of the total amino acids. It also showed a high polyphenol content and outstanding antioxidant properties (106.88 mg TE/g). Based on these findings, R. okamurae has significant potential as a sustainable source of bioactive compounds that can add value to different sectors, including food, feed, pharmaceuticals and cosmetics., This work was done within the framework of a collaboration with HISPANAGAR S.L (Burgos, Spain) . The research was funded by the Spanish Ministry of Science, Innovation and Universities through projects PDI2020-114821RB-I00, PID2020-117744RJ-I00, as well as TED2021-129711B-I00 and CEX2021-001189-S, funded by MCIN/AEI/10.13039/501100011033. The authors also acknowledge funding through the European project CIRCALGAE under grant agreement 101060607. In all projects, funding from "ERDF A way of making Europe" or the "NextGenerationEU/PRTR" is also acknowledged, as appropriate.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Estimation of alginate purity and M/G ratio by methanolysis coupled with anion exchange chromatography

  • Bojorges-Gutierrez, Hylenne
  • López-Rubio, Amparo
  • Fabra Rovira, Maria José
  • Martínez-Abad, Antonio
[EN] Alginates are industrially relevant polysaccharides widely used in the food and biomedical industries for their excellent gelling properties. The growing emphasis on the valorization of marine resources has evidenced the need for alternative methods for the determination of both alginate content and the M/G ratio. This study describes the application of acid methanolysis and separation by anion exchange chromatography. Five samples, including alginates extracted from Saccharina latissima, Ascophyllum nodosum, a certified standard, and two polyuronates (Poly-M and Poly-G), were analysed for their M/G ratio and alginate content at different treatment conditions, and compared with other conventionally used or reference methods (NMR, FTIR, and colorimetric methods). Quantitative estimation of alginate was relatively accurate at optimum conditions (4 h at 100 ¿C), as compared with the certified standard or with other colorimetric methods. M/G ratios were not significantly different from those determined after the reference method ( 1 H NMR) or compared to FTIR protocols. The results evidence that methanolysis may be applied to simultaneously estimate the purity and M/G ratio of alginate-rich samples in a single analysis., The authors acknowledge funds from the project PID2020-117744RJ-I00, grant CEX2021-001189-S funded by MCIN/AEI/10.13039/501100011033 and project CIRCALGAE (Horizon Europe) under grant agreement 101060607. H. Bojorges acknowledges financial support from the Generalitat Valenciana for the award of a Santiago Grisolía grant (GRISOLIAP/2019/007).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Alginate industrial waste streams as a promising source of value-added compounds valorization

  • Bojorges, Hylenne
  • Fabra, Maria José
  • López-Rubio, Amparo
  • Martínez-Abad, Antonio
[EN] The alginate industry processes more than hundred thousand tons per year of algae in Europe, discarding around 80% of the algae biomass as different solid/liquid residual streams. In this work, Saccharina latissima and Ascophyllum nodosum, their generated alginates and all residual fractions generated in the process were characterized in terms of lipid, ash, protein content, and the carbohydrate composition and antioxidant capacities analyzed. The first fraction after acid treatment (ca. 50% of the initial dry biomass) was rich in phlorotannins (15 mg GAE/g) and bioactive fucoidans (15-70%), with a high sulfation degree in A. nodosum. Two fractions generated from the solid residue, one soluble and another insoluble (Ra and Rb, respectively), constituted 9% and 5-8% of the initial biomass and showed great potential as a source of soluble protein (30% for S. latissima), and cellulose (70%) or fucoidan, respec-tively. Valorization strategies are suggested for these waste streams, evidencing their high potential as bioactive, tex-turizing or nutritional added-value ingredients for cosmetic, food, feed or pharmaceutical applications., This work acknowledges financial support from the Spanish Research agency (Ministry of Science and Innovation) through projects RTI-2018-094268-B-C22 and PID2020-117744RJ-I00. H. Bojorges acknowledges fi-nancial support from the Generalitat Valenciana for the award of a Santiago Grisol?a grant (GRISOLIAP/2019/007).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Alginate industrial waste streams as a promising source of value-added compounds valorization

  • Bojorges, Hylenne
  • Fabra, María José
  • López-Rubio, Amparo
  • Martínez-Abad, Antonio
The alginate industry processes more than hundred thousand tons per year of algae in Europe, discarding around 80% of the algae biomass as different solid/liquid residual streams. In this work, Saccharina latissima and Ascophyllum nodosum, their generated alginates and all residual fractions generated in the process were characterized in terms of lipid, ash, protein content, and the carbohydrate composition and antioxidant capacities analyzed. The first fraction after acid treatment (ca. 50% of the initial dry biomass) was rich in phlorotannins (15 mg GAE/g) and bioactive fucoidans (15-70%), with a high sulfation degree in A. nodosum. Two fractions generated from the solid residue, one soluble and another insoluble (Ra and Rb, respectively), constituted 9% and 5-8% of the initial biomass and showed great potential as a source of soluble protein (30% for S. latissima), and cellulose (70%) or fucoidan, respectively. Valorization strategies are suggested for these waste streams, evidencing their high potential as bioactive, texturizing or nutritional added-value ingredients for cosmetic, food, feed or pharmaceutical applications., This work acknowledges financial support from the Spanish Research agency (Ministry of Science and Innovation) through projects RTI-2018-094268-B-C22 and PID2020-117744RJ-I00. H. Bojorges acknowledges financial support from the Generalitat Valenciana for the award of a Santiago Grisolía grant (GRISOLIAP/2019/007)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Structural and functional properties of alginate obtained by means of high hydrostatic pressure-assisted extraction

  • Bojorges, Hylenne
  • Martínez-Abad, Antonio
  • Martínez Sanz, Marta
  • Rodrigo Aliaga, Dolores
  • Vilaplana, Francisco
  • López-Rubio, Amparo
  • Fabra, María José
The effects of the high hydrostatic pressure (HPP) pre-treatment on the alginate extraction were seen to greatly depend on the recalcitrant nature of two algae species. Alginates were deeply characterized in terms of composition, structure (HPAEC-PAD, FTIR, NMR, SEC-MALS), functional and technological properties. The pre-treatment significantly increased the alginate yield in the less recalcitrant A. nodosum (AHP) also favoring the extraction of sulphated fucoidan/fucan structures and polyphenols. Although the molecular weight was significantly lower in AHP samples, neither the M/G ratio nor the M and G sequences were modified. In contrast, a lower increase in alginate extraction yield was observed for the more recalcitrant S. latissima after the HPP pre-treatment (SHP), but it significantly affected the M/G values of the resulting extract. The gelling properties of the alginate extracts were also explored by external gelation in CaCl2 solutions. The mechanical strength and nanostructure of the hydrogel beads prepared were determined using compression tests, synchrotron small angle X-ray scattering (SAXS), and cryo-scanning electron microscopy (Cryo-SEM). Interestingly, the application of HPP significantly improved the gel strength of SHP, in agreement with the lower M/G values and the stiffer rod-like conformation obtained for these samples., Grants RTI-2018-094268-B-C22 and PID2020-117744RJ-I00 funded by MCIN/AEI/10.13039/501100011033 and, as appropriate, by “ERDF A way of making Europe”, by the “European Union” or by the “European Union NextGenerationEU/PRTR”. H. Bojorges acknowledges financial support from the Generalitat Valenciana for the award of a Santiago Grisolía grant (GRISOLIAP/2019/007)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Exploring alternative red seaweed species for the production of agar-based hydrogels for food applications

  • Cebrián Lloret, Vera
  • Martínez Abad, Antonio
  • López-Rubio, Amparo
  • Martínez Sanz, Marta
Three different red seaweed species, Gelidium corneum and two Gracilaria species (Agarophyton chilensis, and Gracilariopsis longissima), were used to produce agar-based fractions through conventional and simplified extraction methods and their composition and gel-forming properties were evaluated. The use of an alkaline pre-treatment was effective in removing impurities such as proteins, lipids, and ash, while the agarose/agaropectin ratio in agar was not affected. This led to the formation of hydrogels with higher stiffness and strength. Surprisingly, the presence of semi-crystalline agaropectin in the agar fractions from the two Gracilaria species, especially G. longissima, promoted the formation of more densely packed and stronger hydrogel networks, with higher gelling temperatures and superior mechanical properties. Thus, these results suggest that G. longissima has the potential to be used as an alternative to the more widespread use of G. corneum for the production of agar hydrogels for food applications., This work was financially supported by Hispanagar. Synchrotron experiments were performed at NCD beamline at ALBA Synchrotron with the collaboration of ALBA staff (proposal 2022025569). The authors also acknowledge funding from the Spanish ministry of Science and Innovation through project PID 2020-117744RJ-I00 and grant CEX 2021-001189-S as well as the European Commission through project CIRCALGAE (Horizon Europe) under grant agreement 101060607., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX 2021-001189-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Overview of alginate extraction processes: Impact on alginate molecular structure and techno-functional properties

  • Bojorges, Hylenne
  • López-Rubio, Amparo
  • Martínez-Abad, Antonio
  • Fabra, María José
Background: Brown algae are a valuable source of various biopolymers, with alginate standing out as a phycocolloid of great industrial importance. Although the extraction process is well established on an industrial scale, several innovative and environmentally friendly extraction technologies have been explored to improve the efficiency of the process both in terms of yields and energy and solvent consumption. Scope and approach: The review aims to describe and analyze different strategies used to extract alginate from brown algae, including different pre-treatment methods used before extraction. In addition, the impact of these extraction technologies, with or without pre-treatments, on alginate's structural and techno-functional properties is also discussed. Key findings: The extraction process parameters play a key role and significantly influence the quality of alginate and the extraction yield. Innovative technologies have the potential to enhance extraction capacity, improve process efficiency, and promote environmental friendliness. Research efforts are focused on achieving sustainable alginate production and co-production of other value-added products. This review provides useful information to the alginate industry towards a more sustainable approach and foster the diversification of high-value products., The authors wish to acknowledge funds from the project PID2020-117744RJ-I00 and grant CEX2021-001189-S funded by MCIN/AEI/10.13039/501100011033 and the project CIRCALGAE (Horizon Europe) under grant agreement 101060607. H. Bojorges acknowledges financial support from the Generalitat Valenciana for the award of a Santiago Grisolía grant (GRISOLIAP/2019/007)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX 2021-001189-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Characterization of the invasive macroalgae Rugulopteryx Okamurae for potential biomass valorisation

  • Cebrián Lloret, Vera
  • Cartan Moya, Sara
  • Martínez Sanz, Marta
  • Gómez-Cortés, Pilar
  • Calvo, Maria V.
  • López-Rubio, Amparo
  • Martínez-Abad, Antonio
This study aimed to examine the composition and properties of the invasive macroalgae R. okamurae and explore potential applications. The results showed that the seaweed biomass is mainly composed of structural carbohydrates, with alginate being the main constituent, accounting for 32 % of its total composition and with a mannuronic and guluronic acid ratio (M/G) ratio of 0.93. It also has a relatively high concentration of fucose, related to the presence of fucoidans that have important biological functions. Among the mineral contents, a high magnesium and calcium (7107 and 5504 mg/kg) concentration, and the presence of heavy metals above legislated thresholds, were notable. R. okamurae also contained a high lipid content of 17 %, mainly composed of saturated fatty acids, but with a significant fraction of n3 polyunsaturated fatty acids (18 %) resulting in a low n6/n3 ratio (0.31), that has health benefits. The protein content of R. okamurae was 12 %, with high-quality proteins, as essential amino acids (mainly leucine, phenylalanine and valine) constitute 32 % of the total amino acids. It also showed a high polyphenol content and outstanding antioxidant properties (106.88 mg TE/g). Based on these findings, R. okamurae has significant potential as a sustainable source of bioactive compounds that can add value to different sectors, including food, feed, pharmaceuticals and cosmetics., This work was done within the framework of a collaboration with HISPANAGAR S.L (Burgos, Spain). The research was funded by the Spanish Ministry of Science, Innovation and Universities through projects PDI2020-114821RB-I00, PID2020-117744RJ-I00, as well as TED2021-129711B-I00 and CEX2021-001189-S, funded by MCIN/AEI/10.13039/501100011033. The authors also acknowledge funding through the European project CIRCALGAE under grant agreement 101060607. In all projects, funding from “ERDF A way of making Europe” or the “NextGenerationEU/PRTR” is also acknowledged, as appropriate., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX 2021-001189-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Protein extraction from the industrial solid residue of brown seaweed after alginate extraction

  • Bojorges, Hylenne
  • Martínez Sanz, Marta
  • Fontes Candia, Cynthia
  • Díaz-Piñero, Laura
  • Martínez-Abad, Antonio
  • López-Rubio, Amparo
  • Fabra, María José
The growing interest in the “blue-bioeconomy” and the valorization of macroalgae has driven research and industrial efforts to develop valorization strategies for the by-products generated during alginate extraction. Sequential extraction methods, such as acid/alkali treatment, enzymatic, ultrasound, and pH-shift process, were investigated and compared in order to obtain protein extracts from the solid residues after alginate extraction from two brown seaweed species (Ascophyllum nodosum and Saccharina latissima). Applying a sequential extraction, combining several methods, allowed the recovery of more than 29.5 % of the total protein from the residues. The resulting extracts exhibited optimal functional properties in terms of oil and water retention and outstanding emulsifying and foaming capacity. In addition, the protein extracts showed considerable polyphenol content, remarkable antioxidant activity, and an enhanced ability to inhibit angiotensin-converting enzyme (ACE). This study demonstrated that the residues after alginate extraction are a sustainable and promising source of protein with potential applications in the food industry., The authors acknowledge funds from the project PID2022-141638OB-I00, PID2020-117744RJ-I00, and the project CIRCALGAE (Horizon Europe) under grant agreement 101060607. The Accreditation as Center of Excellence Severo Ochoa CEX2021-001189-S funded by MCIU/AEI/10.13039/501100011033 is also fully acknowledged. H. Bojorges expresses gratitude for the financial assistance provided by the Generalitat Valenciana in the form of a Santiago Grisolía grant (GRISOLIAP/2019/007)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001189-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Functional and bioactive properties of the protein-polysaccharide extracts from brown algae: Exploring novel functional ingredients

  • Bojorges, Hylenne
  • López-Rubio, Amparo
  • Martínez-Abad, Antonio
  • Fabra, María José
The present work reports the extraction of protein-polysaccharide extracts from brown algae (A. nodosum and S. latissima) for potential food industry applications. A sequential extraction method was employed to maximize yields by incorporating ultrasound, pH adjustment, and enzymatic treatment. The resulting extracts were characterized by their composition, bioactive properties, and emulsifying capabilities. Although the overall extraction yield was significantly higher for A. nodosum extracts, the protein content in both species' extracts increased at least threefold following enzymatic treatment, with S. latissima achieving the highest protein percentages. The enzymatically treated extracts mainly consisted of low molecular weight proteins (17–25 %) and carbohydrates (59–62 %), with alginate and fucoidan as the primary polysaccharides. These extracts exhibited a high emulsifying capacity (approximately 99 %), attributed to their relatively high protein content (acting as surfactants) and lower molecular weight, which enhanced oil droplet stabilization in emulsions. The increased protein content positively correlated with angiotensin-converting enzyme (ACE) inhibitory activity. Furthermore, the antioxidant activity was higher in extracts from A. nodosum, which is linked to sulfated fucoidan/fucan structures and polyphenols., The authors wish to acknowledge funds from the grants PID2022-138328OB-C21, PID2020-117744RJ-I00 and CEX2021-001189-S funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe” and the project CIRCALGAE (Horizon Europe) under grant agreement 101060607. H. Bojorges acknowledges financial support from the Generalitat Valenciana for the award of a Santiago Grisolía grant (GRISOLIAP/2019/007)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001189-S), Peer reviewed