Pasar al contenido principal

DESARROLLO DE DIODOS EMISORES DE LUZ DE PEROVSKITAS DE HALURO CON ESTABILIDAD MEJORADA

PID2022-140090OB-C21

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2022
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT JAUME I DE CASTELLO

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Flexible and scalable 2D/3D tin-based perovskite photodetectors via inkjet printing

  • Vescio, Giovanni|||0000-0002-2418-249X
  • Chirvony, Vladimir S.
  • Suárez Álvarez, Isaac
  • Soriano Díaz, Sandra
  • Zuraw, Wiktor
  • Przypis, Lukasz
  • Öz, Senol
  • Sánchez Díaz, Jesús
  • Lobo, Kenneth|||0000-0003-0257-0771
  • Hernández Márquez, Sergi
  • Cirera Hernandez, Albert
  • Mora Seró, Iván
  • Garrido Fernández, Blas
  • Martínez Pastor, Juan Pascual
This study investigates the scalable development of lead-free 2D/3D metal halide perovskites for advanced optoelectronic applications via the precise deployment of inkjet printing. Specifically, (PEA0.5 BA0.5 )2 FA9 Sn10 I31 films were successfully printed onto both rigid glass and flexible polyethylene terephthalate (PET) substrates prepatterned with indium tin oxide (ITO) interdigitated electrodes. To address the persistent challenge of chemical instability and oxidation inherent to tin-based perovskites, a novel synthesis of high-purity SnI2 precursor was combined with a robust dual-layer encapsulation strategy comprising sequential polymethyl methacrylate (PMMA) and epoxy resin layers. Electro-optical evaluations conducted under continuous-wave (DC) illumination revealed a pronounced photoconductive gain mechanism with a high responsivity exceeding 50 A/W under low incident powers (at 5–10 V bias), accompanied by persistent photoconductivity governed by carrier trapping/detrapping dynamics. Conversely, modulated (AC) light characterization successfully bypassed these slower trapping pathways, enabling high-frequency device operation with a cut-off frequency of 400 kHz, at the expense of a lower responsivity (0.1–0.2 A/W). Crucially, long-term operational testing spanning 30 days revealed no structural or performance degradation with responsivities as high as 50 A/W. These findings provide critical insights into the practical fabrication of sustainable, low-cost, and high-performance lead-free perovskite photodetectors compatible with next-generation flexible and wearable electronics., This work was partially funded by the Ministry of Science and Innovation of Spain under projects LIP-FREE (PID2022-140978OB-I00) and PLEDs (PID2022-140090OB-C21), and also PID2020-120484RB-I00., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Flexible and scalable 2D/3D tin-based perovskite photodetectors via inkjet printing

  • Vescio, Giovanni
  • Chirvony, Vladimir S.
  • Suárez Álvarez, Isaac
  • Soriano Díaz, Sandra
  • Zuraw, Wiktor
  • Przypis, Lukasz
  • Öz, Senol
  • Sánchez Díaz, Jesús
  • Lobo, Kenneth
  • Hernández Márquez, Sergi
  • Cirera Hernandez, Albert
  • Mora Seró, Iván
  • Garrido Fernández, Blas
  • Martínez Pastor, Juan Pascual
This study investigates the scalable development of lead-free 2D/3D metal halide perovskites for advanced optoelectronic applications via the precise deployment of inkjet printing. Specifically, (PEA0.5 BA0.5 )2 FA9 Sn10 I31 films were successfully printed onto both rigid glass and flexible polyethylene terephthalate (PET) substrates prepatterned with indium tin oxide (ITO) interdigitated electrodes. To address the persistent challenge of chemical instability and oxidation inherent to tin-based perovskites, a novel synthesis of high-purity SnI2 precursor was combined with a robust dual-layer encapsulation strategy comprising sequential polymethyl methacrylate (PMMA) and epoxy resin layers. Electro-optical evaluations conducted under continuous-wave (DC) illumination revealed a pronounced photoconductive gain mechanism with a high responsivity exceeding 50 A/W under low incident powers (at 5–10 V bias), accompanied by persistent photoconductivity governed by carrier trapping/detrapping dynamics. Conversely, modulated (AC) light characterization successfully bypassed these slower trapping pathways, enabling high-frequency device operation with a cut-off frequency of 400 kHz, at the expense of a lower responsivity (0.1–0.2 A/W). Crucially, long-term operational testing spanning 30 days revealed no structural or performance degradation with responsivities as high as 50 A/W. These findings provide critical insights into the practical fabrication of sustainable, low-cost, and high-performance lead-free perovskite photodetectors compatible with next-generation flexible and wearable electronics., This work was partially funded by the Ministry of Science and Innovation of Spain under projects LIP-FREE (PID2022-140978OB-I00) and PLEDs (PID2022-140090OB-C21), and also PID2020-120484RB-I00., Peer Reviewed, Postprint (published version)