Pasar al contenido principal

DESARROLLO DE DIODOS EMISORES DE LUZ DE PEROVSKITAS DE HALURO CON ESTABILIDAD MEJORADA

PID2022-140090OB-C21

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2022
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT JAUME I DE CASTELLO

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Control of Stimulated Emission of Tin Perovskites through Polymeric Diffractive Gratings

  • Martínez-Pastor, Juan P.
  • Sánchez-Díaz, Jesús
  • Villalvilla, José M.
  • Soriano-Díaz, Sandra
  • Quintana, José A.
  • Mora-Sero, Ivan
  • Díaz-García, María A.
  • Suárez, Isaac
  • Díaz-García, María A.|||/items/3b28d03f-511f-4a32-9ff4-d4a2e740834f
  • Villalvilla, José M.|||/items/e57ae241-3d26-4d3e-815b-6f890edaa475
FASnI3 (FA: formamidinium) polycrystalline perovskite thin films have demonstrated to be an excellent gain media and less toxic alternative to the Pb-containing perovskite light emitters. However, the instability of Sn perovskites prevents the postprocessing of the film after deposition, making its integration in two-dimensional optical architectures challenging. In this article, FASnI3 polycrystalline thin films are successfully integrated with polymeric diffractive gratings under cost-effective and industrial compatible technology. The gratings are fabricated under holographic techniques, allowing patterning on large areas (≈1 cm2) and the posterior deposition of the perovskite films or cladding layers. The grating period demonstrated to be an adequate tuning parameter to control the amplified spontaneous emission (ASE) properties. Notably, the overlap of the mode with the emission band represents a suitable mechanism to selectively enhance the generation of the ASE (tuned device) above a moderate threshold of 100 μJ/cm2 and extract the random lasing lines created on the grains of the film (detuned device). These results represent a significant advance on Sn-perovskite-based optical sources, offering cost-effective technology for next-generation photonic applications.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Indoor Energy Harvesting Enhancement: Pb-Free Perovskite Solar Cell with Nanostructured Grating Contact

  • Vergaz, Ricardo
  • Sarcanean, Daniel
  • Barreda, Angela
  • López-Fraguas, Eduardo
  • García Cámara, Braulio
  • Mora-Sero, Iván
  • García-Martín, Antonio
Halide perovskite materials have spread in solar cells and photodetectors because of their excellent possibilities in tuning their absorption wavelengths, ease of fabrication, and low carbon footprint. However, their main drawbacks are related to their short device lifetime and stability problems in addition to limited efficiency at certain wavelength. For this reason, in this letter, we design a metasurface that can be integrated into a particularly long-life, stable and sustainable perovskite solar cell with the aim of enhancing its performance under indoor conditions. The metasurface has been designed and numerically simulated to enhance the halide perovskite response at the typical emission wavelengths of indoor LEDs. Adjusting the response of these solar cells to those specific spectral ranges by metasurfaces may create novel energy harvesting devices., Agencia Estatal de Investigación (España): TED2021-131600BC31 (STEP-UP), Agencia Estatal de Investigación (España): TED2021-131600BC33 (STEP-UP), Agencia Estatal de Investigación (España): PID2022-140090OBC21 (PLEDs), Agencia Estatal de Investigación (España): PID2022-140090OBC22 (PLEDs), Peer reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Flexible and scalable 2D/3D tin-based perovskite photodetectors via inkjet printing

  • Vescio, Giovanni|||0000-0002-2418-249X
  • Chirvony, Vladimir S.
  • Suárez Álvarez, Isaac
  • Soriano Díaz, Sandra
  • Zuraw, Wiktor
  • Przypis, Lukasz
  • Öz, Senol
  • Sánchez Díaz, Jesús
  • Lobo, Kenneth|||0000-0003-0257-0771
  • Hernández Márquez, Sergi
  • Cirera Hernandez, Albert
  • Mora Seró, Iván
  • Garrido Fernández, Blas
  • Martínez Pastor, Juan Pascual
This study investigates the scalable development of lead-free 2D/3D metal halide perovskites for advanced optoelectronic applications via the precise deployment of inkjet printing. Specifically, (PEA0.5 BA0.5 )2 FA9 Sn10 I31 films were successfully printed onto both rigid glass and flexible polyethylene terephthalate (PET) substrates prepatterned with indium tin oxide (ITO) interdigitated electrodes. To address the persistent challenge of chemical instability and oxidation inherent to tin-based perovskites, a novel synthesis of high-purity SnI2 precursor was combined with a robust dual-layer encapsulation strategy comprising sequential polymethyl methacrylate (PMMA) and epoxy resin layers. Electro-optical evaluations conducted under continuous-wave (DC) illumination revealed a pronounced photoconductive gain mechanism with a high responsivity exceeding 50 A/W under low incident powers (at 5–10 V bias), accompanied by persistent photoconductivity governed by carrier trapping/detrapping dynamics. Conversely, modulated (AC) light characterization successfully bypassed these slower trapping pathways, enabling high-frequency device operation with a cut-off frequency of 400 kHz, at the expense of a lower responsivity (0.1–0.2 A/W). Crucially, long-term operational testing spanning 30 days revealed no structural or performance degradation with responsivities as high as 50 A/W. These findings provide critical insights into the practical fabrication of sustainable, low-cost, and high-performance lead-free perovskite photodetectors compatible with next-generation flexible and wearable electronics., This work was partially funded by the Ministry of Science and Innovation of Spain under projects LIP-FREE (PID2022-140978OB-I00) and PLEDs (PID2022-140090OB-C21), and also PID2020-120484RB-I00., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Flexible and scalable 2D/3D tin-based perovskite photodetectors via inkjet printing

  • Vescio, Giovanni
  • Chirvony, Vladimir S.
  • Suárez Álvarez, Isaac
  • Soriano Díaz, Sandra
  • Zuraw, Wiktor
  • Przypis, Lukasz
  • Öz, Senol
  • Sánchez Díaz, Jesús
  • Lobo, Kenneth
  • Hernández Márquez, Sergi
  • Cirera Hernandez, Albert
  • Mora Seró, Iván
  • Garrido Fernández, Blas
  • Martínez Pastor, Juan Pascual
This study investigates the scalable development of lead-free 2D/3D metal halide perovskites for advanced optoelectronic applications via the precise deployment of inkjet printing. Specifically, (PEA0.5 BA0.5 )2 FA9 Sn10 I31 films were successfully printed onto both rigid glass and flexible polyethylene terephthalate (PET) substrates prepatterned with indium tin oxide (ITO) interdigitated electrodes. To address the persistent challenge of chemical instability and oxidation inherent to tin-based perovskites, a novel synthesis of high-purity SnI2 precursor was combined with a robust dual-layer encapsulation strategy comprising sequential polymethyl methacrylate (PMMA) and epoxy resin layers. Electro-optical evaluations conducted under continuous-wave (DC) illumination revealed a pronounced photoconductive gain mechanism with a high responsivity exceeding 50 A/W under low incident powers (at 5–10 V bias), accompanied by persistent photoconductivity governed by carrier trapping/detrapping dynamics. Conversely, modulated (AC) light characterization successfully bypassed these slower trapping pathways, enabling high-frequency device operation with a cut-off frequency of 400 kHz, at the expense of a lower responsivity (0.1–0.2 A/W). Crucially, long-term operational testing spanning 30 days revealed no structural or performance degradation with responsivities as high as 50 A/W. These findings provide critical insights into the practical fabrication of sustainable, low-cost, and high-performance lead-free perovskite photodetectors compatible with next-generation flexible and wearable electronics., This work was partially funded by the Ministry of Science and Innovation of Spain under projects LIP-FREE (PID2022-140978OB-I00) and PLEDs (PID2022-140090OB-C21), and also PID2020-120484RB-I00., Peer Reviewed, Postprint (published version)