Pasar al contenido principal

TECNOLOGIAS DISRUPTIVAS PARA LEDS Y DISPLAYS BASADAS EN IMPRESION INKJET DE PEROVSKITAS LIBRES DE PLOMO

PID2022-140978OB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2022
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE BARCELONA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Temperature-Dependent Optical Properties of CsCu2I3 Perovskites

  • Vescio, Giovanni
  • Diago Forero, Joshua
  • Pellegrino, Paolo
  • García de Mendoza, Sergio
  • Oliva, Robert
  • Ibáñez Insa, Jordi
  • Garrido, B.
  • Cirera, Albert
  • Hernández, Sergi
This study examines the temperature-dependent optical properties of CsCu2I3 nanocrystals using photoluminescence (PL) and optical transmittance techniques. The nanocrystals are synthesized by dissolving CsI and CuI in N,N-dimethylformamide, varying the synthesis temperature and oleic acid volume. X-ray photoelectron spectroscopy (XPS) and X-ray diffraction (XRD) confirm the stoichiometry and crystalline structure, with optimal synthesis conditions found at 80 °C and 0.8 mL of oleic acid. Transmittance measurements from 10 K to room temperature shows a redshift in the optical absorption edge with increasing temperature. PL emission, observes in the yellow range, exhibited a blueshift as temperature rose. The emission intensity varied with excitation energy (3.81 eV vs. 4.13 eV): at 4.13 eV, intensity monotonically decreased, whereas at 3.81 eV, it peaked at 190 K, suggesting resonant excitation conditions. By analyzing the temperature-dependent PL intensity, the exciton binding energy and self-trap depth energy are estimated. These findings contribute to developing a quantitative model of energy levels in CsCu2I3 perovskites, highlighting their potential applications in optoelectronics. These results provide new insights into the fundamental optical mechanisms in CsCu2I3 perovskites, reinforcing the significance of lead-free perovskites for sustainable light-emitting applications and offering valuable knowledge about their optical properties., This work was financially supported by the Spanish national project LIP-FREE (PID2022-140978OB-I00). J.D.F. acknowledges funding from the subprogram “Ayudas para la Formación de Personal Investigador” (PRE2020-093729), provided by the Spanish Ministry of Science and Innovation. The author, G.V. is a Serra Húnter Fellow., Peer reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Flexible and scalable 2D/3D tin-based perovskite photodetectors via inkjet printing

  • Vescio, Giovanni|||0000-0002-2418-249X
  • Chirvony, Vladimir S.
  • Suárez Álvarez, Isaac
  • Soriano Díaz, Sandra
  • Zuraw, Wiktor
  • Przypis, Lukasz
  • Öz, Senol
  • Sánchez Díaz, Jesús
  • Lobo, Kenneth|||0000-0003-0257-0771
  • Hernández Márquez, Sergi
  • Cirera Hernandez, Albert
  • Mora Seró, Iván
  • Garrido Fernández, Blas
  • Martínez Pastor, Juan Pascual
This study investigates the scalable development of lead-free 2D/3D metal halide perovskites for advanced optoelectronic applications via the precise deployment of inkjet printing. Specifically, (PEA0.5 BA0.5 )2 FA9 Sn10 I31 films were successfully printed onto both rigid glass and flexible polyethylene terephthalate (PET) substrates prepatterned with indium tin oxide (ITO) interdigitated electrodes. To address the persistent challenge of chemical instability and oxidation inherent to tin-based perovskites, a novel synthesis of high-purity SnI2 precursor was combined with a robust dual-layer encapsulation strategy comprising sequential polymethyl methacrylate (PMMA) and epoxy resin layers. Electro-optical evaluations conducted under continuous-wave (DC) illumination revealed a pronounced photoconductive gain mechanism with a high responsivity exceeding 50 A/W under low incident powers (at 5–10 V bias), accompanied by persistent photoconductivity governed by carrier trapping/detrapping dynamics. Conversely, modulated (AC) light characterization successfully bypassed these slower trapping pathways, enabling high-frequency device operation with a cut-off frequency of 400 kHz, at the expense of a lower responsivity (0.1–0.2 A/W). Crucially, long-term operational testing spanning 30 days revealed no structural or performance degradation with responsivities as high as 50 A/W. These findings provide critical insights into the practical fabrication of sustainable, low-cost, and high-performance lead-free perovskite photodetectors compatible with next-generation flexible and wearable electronics., This work was partially funded by the Ministry of Science and Innovation of Spain under projects LIP-FREE (PID2022-140978OB-I00) and PLEDs (PID2022-140090OB-C21), and also PID2020-120484RB-I00., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Controlling film formation in inkjet-printed MAPbBr3 through graphene incorporation for enhanced photodetection

  • Lobo, Kenneth|||0000-0003-0257-0771
  • Bartolomé Vílchez, Javier
  • Vila Santos, Maria
  • Vescio, Giovanni|||0000-0002-2418-249X
  • Sánchez Alarcón, Raúl I.
  • Khan, Junaid
  • Marí Guaita, Júlia
  • Palacio Bonet, Francisco
  • Martínez Pastor, Juan Pascual
  • Hernández Márquez, Sergi
  • Garrido Fernández, Blas
  • Coya Párraga, Carmen
  • Cirera Hernandez, Albert
The exceptional optoelectronic properties and solution processability of metal halide perovskites make them promising candidatesfor realizing high-performance devices via additive manufacturing techniques like printing. The composition of inks usedtherein plays a vital role in thin film formation, critically influencing optical conversion and electrical transport in devices.However, understanding and controlling film formation in printed perovskite layers remains largely elusive. Presented hereinare investigations on the influence of adding graphene flakes into precursor inks of methylammonium lead bromide (MAPbBr 3 )for enhancing printed photodetector performance. Direct visualization of the film formation process suggests that the grapheneflakes induce a delay in nucleation and modulate crystallization kinetics, promoting a transition from isolated island growth toextended dendritic structures. While optical properties remained unaffected, longer carrier lifetimes, homogeneity in composition,and lowering of work functions were observed in films containing graphene, leading to superior device performance. With single-pass printing, photodetectors with responsivities up to 3.54 A·W-1 , detectivities ~ 10 12 Jones, and fast response time < 85 mswere realized. These findings present an alternative approach through graphene-in-ink formulation, revealing the importance ofcontrolled film formation and paving a unique pathway for improvisation in printed devices., This work has been carried out under the Ministerio de Ciencia,Innovación y Universidades project PDC2023-145804-100 and PID2022-140978OB-I00, and is funded by MICIU/AEI/10.13039/501100011033, andby the European Union NextGenerationEU/PRTR. This work was alsofunded by the Community of Madrid and Rey Juan Carlos University(URJC) under projects F1259 and 2024/REGING-20235. KL acknowledgesthe help received from the Surface Analysis Laboratory of the CCiTUBfor carrying out the XPS. The Technological Support Center (CAT) of theURJC is acknowledged for carrying out the graphene flake SEM imaging.JMG acknowledges the financial backing from the Grant JDC2022-049260-I funded by the Spanish Ministry of Science and Innovation andEuropean Union Next Generation EU/PRTR, Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Inkjet-printed h-BN memristors with a record endurance under low-currents

  • Aran Vilà, Pere
  • Vescio, Giovanni|||0000-0002-2418-249X
  • Castillo Eraso, Juan Carlos
  • Palacio Bonet, Francisco
  • Garrido Fernández, Blas
  • Hernández Márquez, Sergi
  • Cirera Hernandez, Albert
Memristors exhibiting both volatile and non-volatile resistive switching (RS) behaviors hold significant potential for theirutilization as artificial neurons and synapses in neuromorphic computing systems, respectively. Inkjet printing presents aneconomical, low-material-waste, and compatible process for the fabrication of solution-based memristors, which are essential forflexible, wearable and biocompatible applications. However, inkjet-printed memristors typically exhibit low endurance (below 10 4cycles) and high switching currents (above 100 µA), both of which represent critical limitations for the practical implementationand low-power operation of neuromorphic computing systems. In this work, a hexagonal boron nitride (h-BN) based memristorformulated via liquid phase exfoliation (LPE) and fabricated with inkjet printing demonstrates exceptional electrical performancewith a remarkable endurance of 2.2 million cycles at very low currents (below 1 µA) in a volatile regime under a current-driven approach. This result surpasses the highest endurance reported to date on inkjet-printed-based memristors, surpassingthe threshold of one million cycles. At higher currents (above 10 µA), the same devices exhibit stable non-volatile RS with anendurance of 70 000 cycles. This study not only demonstrates the remarkable performance of the designed memristors, but alsoopens new avenues for current-driven memristive electrical characterization and neuromorphic applications., The authors wish to acknowledge the financial support from Science,Innovation and Universities Ministry of Spain for Grant PID2022-140978OB-I00 (LIP-FREE Project) and Grant PID2025-168837OB-I00(REVIS Project). The author G.V. is a Serra Húnter Fellow., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Flexible and scalable 2D/3D tin-based perovskite photodetectors via inkjet printing

  • Vescio, Giovanni
  • Chirvony, Vladimir S.
  • Suárez Álvarez, Isaac
  • Soriano Díaz, Sandra
  • Zuraw, Wiktor
  • Przypis, Lukasz
  • Öz, Senol
  • Sánchez Díaz, Jesús
  • Lobo, Kenneth
  • Hernández Márquez, Sergi
  • Cirera Hernandez, Albert
  • Mora Seró, Iván
  • Garrido Fernández, Blas
  • Martínez Pastor, Juan Pascual
This study investigates the scalable development of lead-free 2D/3D metal halide perovskites for advanced optoelectronic applications via the precise deployment of inkjet printing. Specifically, (PEA0.5 BA0.5 )2 FA9 Sn10 I31 films were successfully printed onto both rigid glass and flexible polyethylene terephthalate (PET) substrates prepatterned with indium tin oxide (ITO) interdigitated electrodes. To address the persistent challenge of chemical instability and oxidation inherent to tin-based perovskites, a novel synthesis of high-purity SnI2 precursor was combined with a robust dual-layer encapsulation strategy comprising sequential polymethyl methacrylate (PMMA) and epoxy resin layers. Electro-optical evaluations conducted under continuous-wave (DC) illumination revealed a pronounced photoconductive gain mechanism with a high responsivity exceeding 50 A/W under low incident powers (at 5–10 V bias), accompanied by persistent photoconductivity governed by carrier trapping/detrapping dynamics. Conversely, modulated (AC) light characterization successfully bypassed these slower trapping pathways, enabling high-frequency device operation with a cut-off frequency of 400 kHz, at the expense of a lower responsivity (0.1–0.2 A/W). Crucially, long-term operational testing spanning 30 days revealed no structural or performance degradation with responsivities as high as 50 A/W. These findings provide critical insights into the practical fabrication of sustainable, low-cost, and high-performance lead-free perovskite photodetectors compatible with next-generation flexible and wearable electronics., This work was partially funded by the Ministry of Science and Innovation of Spain under projects LIP-FREE (PID2022-140978OB-I00) and PLEDs (PID2022-140090OB-C21), and also PID2020-120484RB-I00., Peer Reviewed, Postprint (published version)