Pasar al contenido principal

APROVECHAMIENTO MAS EFICIENTE DE BIOMASA LIGNOCELULOSICA PARA LA OBTENCION DE MATERIALES CARBONOSOS DE ALTAS PRESTACIONES Y PRODUCTOS QUIMICOS

RTI2018-095291-B-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE ALICANTE

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Efficient production of multi-Layer graphene from graphite flakes in water by lipase-graphene sheets conjugation

  • Losada-García, Noelia
  • Berenguer Murcia, A.
  • Cazorla Amorós, Diego
  • Palomo, José Miguel
© 2019 by the authors., Biographene was successfully produced in water from graphite flakes by a simple, rapid, and efficient methodology based on a bioexfoliation technology. The methodology consisted in the application of a lipase, with a unique mechanism of interaction with hydrophobic surfaces, combined with a previous mechanical sonication, to selectively generate lipase-graphene sheets conjugates in water at room temperature. The adsorption of the lipase on the graphene sheets permits to keep the sheets separated in comparison with other methods. It was possible to obtain more than 80% of graphene (in the form of multi-layer graphene) from low-cost graphite and with less damage compared to commercial graphene oxide (GO) or reduced GO. Experimental analysis demonstrated the formation of multi-layer graphene (MLG) mainly using lipase from Thermomyces Lanuginosus (TLL)., This research was supported by GRO PROGRAM 2017 and SAMSUNG L.S. The authors thank the support by the Spanish National Research Council (CSIC). We also thank to the and MCIUN and FEDER by funding Projects RTI2018-095291-B-I00 and RTI2018-095291-B-I00., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Surface-enriched boron-doped TiO2 nanoparticles as photocatalysts for propene oxidation

  • Cano Casanova, Laura
  • Ansón-Casaos, Alejandro
  • Hernández-Ferrer, Javier
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Garro, Núria
  • Lillo-Ródenas, Maria Ángeles
  • Román Martínez, María del Carmen
2 schemes, 8 figures.-- Supplementary information available., A series of nanostructured boron-TiO2 photocatalysts (B-X-TiO2-T) were prepared by sol–gel synthesis using titanium tetraisopropoxide and boric acid. The effects of the synthesis variables, boric acid amount (X) and crystallization temperature (T), on structural and electronic properties and on the photocatalytic performance for propene oxidation, are studied. This reaction accounts for the remediation of pollution caused by volatile organic compounds, and it is carried out at low concentrations, a case in which efficient removal techniques are difficult and costly to implement. The presence of boric acid during the TiO2 synthesis hinders the development of rutile without affecting the textural properties. X-ray photoelectron spectroscopy analysis reveals the interstitial incorporation of boron into the surface lattice of the TiO2 nanostructure, while segregation of B2O3 occurs in samples with high boron loading, also confirmed by X-ray diffraction. The best-performing photocatalysts are those with the lowest boron loading. Their high activity, outperforming the equivalent sample without boron, can be attributed to a high anatase and surface hydroxyl group content and efficient photo-charge separation (photoelectrochemical characterization, PEC), which can explain the suppression of visible photoluminescence (PL). Crystallization at 450 °C renders the most active sample, likely due to the development of a pure anatase structure with a large surface boron enrichment. A shift in the wavelength-dependent activity profile (PEC data) and the lowest electron–hole recombination rate (PL data) are also observed for this sample., The authors thank funding to the Spanish Ministry of Science, Innovation and Universities and FEDER, project of reference RTI2018-095291-B-I00, GV/FEDER (PROMETEO/2018/076), and University of Alicante (VIGROB-136) for financial support. Financial support from Spanish MICINN/AEI under projects PID2019-104272RB-C51/AEI/10.13039/501100011033 and PID2019-104272RB-C53/AEI/10.13039/501100011033 and the Diputación General de Aragón under project T03_20R (Grupo Reconocido) is acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Easy enrichment of graphitic nitrogen to prepare highly catalytic carbons for oxygen reduction reaction

  • Quílez Bermejo, J.
  • Pérez Rodríguez, Sara
  • Canevesi, Rafael L. S.
  • Torres Gamarra, Daniel
  • Morallón, Emilia
  • Cazorla Amorós, Diego
  • Celzard, Alain
  • Fierro, Vanessa
5 figures, 1 table., One of the biggest challenges in producing fuel cells at affordable prices is to synthesize carbon materials selectively doped with graphitic nitrogen, as it is considered the most active nitrogen species for the oxygen reduction reaction (ORR). So far, all strategies focus on the use of nitrogen-containing carbon precursors, which limits the functionalization of commercially available carbon materials. Here, we present a post-functionalization method to boost the catalytic properties of carbon materials for the ORR by selectively enriching activated carbons with nitrogen graphitic species. A commercial high-surface area activated carbon was post-functionalized by a two-step procedure. First, the commercial carbon was mixed with different carbon/urea weight ratios and heated in air at 350 °C. Then, the functionalized materials were heat-treated at high temperature (from 700 to 1300 °C) to tailor the amount and distribution of the different nitrogen species in the resulting carbon structure. Nitrogen functionalization using a carbon to urea weight ratio of 1:2 and heat-treatment at 1100 °C led to highly selective doping in graphitic nitrogen species, which provided the tools to individually asses the catalytic activity of these nitrogen species. In addition, this study presents a low-cost and easily feasible synthesis route to improve the catalytic activity of carbon materials, leading to an onset potential of almost 0.9 V compared to reversible hydrogen electrode for ORR in an alkaline electrolyte. Moreover, this study provides significant evidence for the key role of graphitic nitrogen., The French research team thanks ANR-15-IDEX-04-LUE and the TALiSMAN project (2019–000215), financed by the European Regional Development Fund (ERDF). The authors from UA thank MICINN and ERDF (project RTI2018-095291-B-I00) for financial support., Peer reviewed
Docta Complutense
Publicación Artículo científico (JournalArticle)

A review on the immobilization of pepsin: A Lys-poor enzyme that is unstable at alkaline pH values

  • Morellon-Sterling, Roberto
  • Tavano, Olga
  • Bolívar Bolívar, Juan Manuel
  • Berenguer-Murcia, Ángel
  • Vela-Gutiérrez, Gilber
  • Sabir, Jamal
  • Tacias-Pascacio, Veymar
  • Fernandez-Lafuente, Roberto
Pepsin is a protease used in many different applications, and in many instances, it is utilized in an immobilized form to prevent contamination of the reaction product. This enzyme has two peculiarities that make its immobilization complex. The first one is related to the poor presence of primary amino groups on its surface (just one Lys and the terminal amino group). The second one is its poor stability at alkaline pH values. Both features make the immobilization of this enzyme to be considered a complicated goal, as most of the immobilization protocols utilize primary amino groups for immobilization. This review presents some of the attempts to get immobilized pepsin biocatalyst and their applications. The high density of anionic groups (Asp and Glu) make the anion exchange of the enzyme simpler, but this makes many of the strategies utilized to immobilize the enzyme (e.g., amino-glutaraldehyde supports) more related to a mixed ion exchange/hydrophobic adsorption than to real covalent immobilization. Finally, we propose some possibilities that can permit not only the covalent immobilization of this enzyme, but also their stabilization via multipoint covalent attachment.