Pasar al contenido principal

SENSADO DE GASES DISTRIBUIDO Y AUTONOMO EMPLEANDO NANOMATERIALES DE BAJA DIMENSION

RTI2018-101580-B-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT ROVIRA I VIRGILI

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Octahedral Molybdenum Iodide Clusters Supported on Graphene for Resistive and Optical Gas Sensing

  • Casanova-Chafer, Juan
  • García-Aboal, Rocío
  • Llobet, Eduard
  • Atienzar Corvillo, Pedro Enrique|||0000-0002-0356-021X
  • Feliz Rodriguez, Marta|||0000-0002-4429-0551
[EN] This paper reports for the first time a gas-sensitive nanohybrid based on octahedral molybdenum iodide clusters supported on graphene flakes (Mo-6@Graphene). The possibility of integrating this material into two different transducing schemes for gas sensing is proposed since the nanomaterial changes both its electrical resistivity and optical properties when exposed to gases and at room temperature. Particularly, when implemented in a chemoresistive device, the Mo-6@Graphene hybrid showed an outstanding sensing performance toward NO2, revealing a limit of quantification of about 10 ppb and excellent response repeatability (0.9% of relative error). While the Mo-6@Graphene chemoresistor was almost insensitive to NH3, the use of an optical transduction scheme (changes in photoluminescence) provided an outstanding detection of NH3 even for a low loading of Mo-6. Nevertheless, the photoluminescence was not affected by the presence of NO2. In addition, the hybrid material revealed high stability of its gas sensing properties over time and under ambient moisture. Computational chemistry calculations were performed to better understand these results, and plausible sensing mechanisms were presented accordingly. These results pave the way to develop a new generation of multi-parameter sensors in which electronic and optical interrogation techniques can be implemented simultaneously, advancing toward the realization of highly selective and orthogonal gas sensing., J.C.-C. gratefully thanks ICREA Academia (project: 2018 ICREA Academia-01-AJUT). This research was funded from project PID2021-123163OB-I00 funded by MCIN/AEI/10.13039/501100011033/and FEDER A way of making Europe, and Generalitat Valenciana (grant number AICO/2020/149) . This work was partially funded by MICINN and FEDER via grant no. RTI2018-101580-B-I00. E. L. was supported by the Catalan Institution for Research and Advanced Studies via the 2018 Edition of the ICREA Academia Award.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Gas Sensing Properties of Perovskite Decorated Graphene at Room Temperature

  • Casanova-Cháfer, Juan
  • García-Aboal, Rocío
  • LLOBET, EDUARD
  • Atienzar Corvillo, Pedro Enrique|||0000-0002-0356-021X
[EN] This paper explores the gas sensing properties of graphene nanolayers decorated with lead halide perovskite (CH3NH3PbBr3) nanocrystals to detect toxic gases such as ammonia (NH3) and nitrogen dioxide (NO2). A chemical-sensitive semiconductor film based on graphene has been achieved, being decorated with CH3NH3PbBr3 perovskite (MAPbBr3) nanocrystals (NCs) synthesized, and characterized by several techniques, such as field emission scanning electron microscopy, transmission electron microscopy and X-ray photoelectron spectroscopy. Reversible responses were obtained towards NO2 and NH3 at room temperature, demonstrating an enhanced sensitivity when the graphene is decorated by MAPbBr3 NCs. Furthermore, the effect of ambient moisture was extensively studied, showing that the use of perovskite NCs in gas sensors can become a promising alternative to other gas sensitive materials, due to the protective character of graphene, resulting from its high hydrophobicity. Besides, a gas sensing mechanism is proposed to understand the effects of MAPbBr3 sensing properties, This work was funded in part by MINECO, MICINN and FEDER via grants no. RTI2018-101580-B-I00, by AGAUR under grant. 2017SGR 418 J.C.C gratefully acknowledges a doctoral fellowship from URV under the Marti i Franques fellowship program. E.L. is supported by the Catalan institution for Research and Advanced Studies via the 2012 and 2018 Editions of the ICREA Academia Award. P.A. acknowledges the financial support from the Spanish Government through 'Severo Ochoa"(SEV-2016-0683, MINECO) and PGC2018-099744-B-I00 (MCIU/AEI/FEDER, UE), and R.G.A. acknowledges FPI scholarship the Spanish Government-MINECO for a (TEC2015-74405-JIN), MAT2015-69669-P.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Unraveling the Gas-Sensing Mechanisms of Lead-Free Perovskites Supported on Graphene

  • Casanova-Chafer, Juan
  • García-Aboal, Rocío
  • Llobet, Eduard
  • Atienzar Corvillo, Pedro Enrique|||0000-0002-0356-021X
[EN] Lead halide perovskites have been attracting great attention due to their outstanding properties and have been utilized for a wide variety of applications. However, the high toxicity of lead promotes an urgent and necessary search for alternative nanomaterials. In this perspective, the emerging leadfree perovskites are an environmentally friendly and harmless option. The present work reports for the first time gas sensors based on lead-free perovskite nanocrystals supported on graphene, which acts as a transducing element owing to its high and efficient carrier transport properties. The use of nanocrystals enables achieving excellent sensitivity toward gas compounds and presents better properties than those of bulky perovskite thin films, owing to their quantum confinement effect and exciton binding energy. Specifically, an industrially scalable, facile, and inexpensive synthesis is proposed to support two different perovskites (Cs3CuBr5 and Cs2AgBiBr6) on graphene for effectively detecting a variety of harmful pollutants below the threshold limit values. H2 and H2S gases were detected for the first time by utilizing lead-free perovskites, and ultrasensitive detection of NO2 was also achieved at room temperature. In addition, the band-gap type, defect tolerance, and electronic surface traps at the nanocrystals were studied in detail for understanding the differences in the sensing performance observed. Finally, a comprehensive sensing mechanism is proposed., This study was funded in part by the Marie Sklodowska-Curie Actions (MSCA) Research and Innovation Staff Exchange (RISE), no. H2020-MSCA-RISE-2018-823895 "SENSOFT", by MICINN and FEDER grant no. RTI2018-101580-I00 and AGAUR grant no. 2017 SGR 418. J.C.-C. is supported by a postdoctoral ICREA grant. P.A . acknowledges the financial support from the Spanish Government through no. PGC2018-099744-B-I00 (MCIU/AEI/FEDER) and Generalitat Valenciana (no. AICO/2020/149). E.L. is supported by the Catalan Institute for advanced studies (ICREA) via the 2018 Edition of the ICREA Academia Award. The authors also thank the Electron Microscopy Service of the Universitat Polite`cnica de Valencia for their support in HRTEM and FESEM image acquisition.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The role of anions and cations in the gas sensing mechanisms of graphene decorated with lead halide perovskite nanocrystals

  • Casanova-Cháfer, Juan
  • García-Aboal, R.
  • Atienzar, Pedro
  • Llobet, Eduard
We report the effects of both anions and cations in lead halide perovskite-graphene hybrids applied to gas sensing. Ultra-fast sensors that can work at room temperature are developed and studied to elucidate the role in the gas sensing mechanisms of different ions in perovskite nanocrystals., This work was supported in part by MICINN and FEDER (grant no. RTI2018-101580-B-I00) and by AGAUR under grant. 2017SGR418. J. C. C. gratefully acknowledges the postdoctoral fellowship from URV. R. G. A. acknowledges the FPI scholarship from MINECO TEC2015-74405-JIN and MAT2015-69669-P. P. A. acknowledges the financial support from the Spanish Government through ‘Severo Ochoa” (SEV-2016-0683, MINECO) and PGC2018-099744-B-I00 (MCIU/AEI/FEDER). E. L. was supported by the Catalan institution for Research and Advanced Studies via the 2018 Edition of the ICREA Academia Award.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Perovskite@graphene nanohybrids for breath analysis: A proof-of-concept

  • Casanova-Cháfer, Juan
  • García-Aboal, R.
  • Atienzar, Pedro
  • Bittencourt, Carla
  • Llobet, Eduard
Nanohybrids comprising graphene loaded with perovskite nanocrystals have been demonstrated as a potential option for sensing applications. Specifically, their combination presents an interesting synergistic effect owing to greater sensitivity when bare graphene is decorated with perovskites. In addition, since the main drawback of perovskites is their instability towards ambient moisture, the hydrophobic properties of graphene can protect them, enabling their use for ambient monitoring, as previously reported. However not limited to this, the present work provides a proof-of-concept to likewise employ them in a potential application as breath analysis for the detection of health-related biomarkers. There is a growing demand for sensitive, non-invasive, miniaturized, and inexpensive devices able to detect specific gas molecules in human breath. Sensors gathering these requirements may be employed as a screening tool for reliable and fast detection of potential health issues. Moreover, perovskite@graphene nanohybrids present additional properties highly desirable as the capability to be operated at room temperature (i.e., reduced power consumption), reversible interaction with gases (i.e., reusability), and long-term stability. Within this perspective, the combination of both nanomaterials, perovskite nanocrystals and graphene, possibly includes the main requirements needed, being a promising option to be employed in the next generation of sensing devices., This research was supported in part by MICINN and FEDER via grants no. RTI2018-101580-B-I00, by AGAUR under grant 2017SGR418 and by Belgian Fund for Scientific Research under FRFC contract J001019. J.C.C. gratefully acknowledges a postdoctoral fellowship from URV. R.G.A. acknowledges an FPI scholarship from MINECO TEC2015-74405-JIN and MAT2015-69669-P. P.A. acknowledges the financial support from the Spanish Government through “Severo Ochoa” (SEV-2016-0683, MINECO) and PGC2018-099744-B-I00 (MCIU/AEI/FEDER). E.L. is supported by the Catalan institution for Research and Advanced Studies via the 2018 Edition of the ICREA Academia Award. C.B. is a research associate at the National Funds for Scientific Research (FRS-FNRS, Belgium).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Unraveling the Gas-Sensing Mechanisms of Lead-Free Perovskites Supported on Graphene

  • Casanova-Cháfer, Juan
  • García-Aboal, R.
  • Atienzar, Pedro
  • Llobet, Eduard
Lead halide perovskites have been attracting great attention due to their outstanding properties and have been utilized for a wide variety of applications. However, the high toxicity of lead promotes an urgent and necessary search for alternative nanomaterials. In this perspective, the emerging lead-free perovskites are an environmentally friendly and harmless option. The present work reports for the first time gas sensors based on lead-free perovskite nanocrystals supported on graphene, which acts as a transducing element owing to its high and efficient carrier transport properties. The use of nanocrystals enables achieving excellent sensitivity toward gas compounds and presents better properties than those of bulky perovskite thin films, owing to their quantum confinement effect and exciton binding energy. Specifically, an industrially scalable, facile, and inexpensive synthesis is proposed to support two different perovskites (Cs3CuBr5 and Cs2AgBiBr6) on graphene for effectively detecting a variety of harmful pollutants below the threshold limit values. H2 and H2S gases were detected for the first time by utilizing lead-free perovskites, and ultrasensitive detection of NO2 was also achieved at room temperature. In addition, the band-gap type, defect tolerance, and electronic surface traps at the nanocrystals were studied in detail for understanding the differences in the sensing performance observed. Finally, a comprehensive sensing mechanism is proposed., This study was funded in part by the Marie Skłodowska-Curie Actions (MSCA) Research and Innovation Staff Exchange (RISE), no. H2020-MSCA-RISE-2018-823895 “SENSOFT”, by MICINN and FEDER grant no. RTI2018- 101580-I00 and AGAUR grant no. 2017 SGR 418. J.C.-C. is supported by a postdoctoral ICREA grant. P.A. acknowledges the financial support from the Spanish Government through no. PGC2018-099744-B-I00 (MCIU/AEI/FEDER) and Generalitat Valenciana (no. AICO/2020/149). E.L. is supported by the Catalan Institute for advanced studies (ICREA) via the 2018 Edition of the ICREA Academia Award. The authors also thank the Electron Microscopy Service of the Universitat Politècnica de Valencia for their support in HRTEM and FESEM image acquisition.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Octahedral Molybdenum Iodide Clusters Supported on Graphene for Resistive and Optical Gas Sensing

  • Casanova-Cháfer, Juan
  • García-Aboal, R.
  • Atienzar, Pedro
  • Feliz Rodríguez, Marta
  • Llobet, Eduard
This paper reports for the first time a gas-sensitive nanohybrid based on octahedral molybdenum iodide clusters supported on graphene flakes (Mo6@Graphene). The possibility of integrating this material into two different transducing schemes for gas sensing is proposed since the nanomaterial changes both its electrical resistivity and optical properties when exposed to gases and at room temperature. Particularly, when implemented in a chemoresistive device, the Mo6@Graphene hybrid showed an outstanding sensing performance toward NO2, revealing a limit of quantification of about 10 ppb and excellent response repeatability (0.9% of relative error). While the Mo6@Graphene chemoresistor was almost insensitive to NH3, the use of an optical transduction scheme (changes in photoluminescence) provided an outstanding detection of NH3 even for a low loading of Mo6. Nevertheless, the photoluminescence was not affected by the presence of NO2. In addition, the hybrid material revealed high stability of its gas sensing properties over time and under ambient moisture. Computational chemistry calculations were performed to better understand these results, and plausible sensing mechanisms were presented accordingly. These results pave the way to develop a new generation of multi-parameter sensors in which electronic and optical interrogation techniques can be implemented simultaneously, advancing toward the realization of highly selective and orthogonal gas sensing., J.C.-C. gratefully thanks ICREA Academia (project: 2018 ICREA Academia-01-AJUT). This research was funded from project PID2021-123163OB-I00 funded by MCIN/AEI/10.13039/501100011033/ and FEDER A way of making Europe, and Generalitat Valenciana (grant number AICO/2020/149). This work was partially funded by MICINN and FEDER via grant no. RTI2018-101580-B-I00. E. L. was supported by the Catalan Institution for Research and Advanced Studies via the 2018 Edition of the ICREA Academia Award.